MSI K7T - USB ISSUE

I am using a MSI K7T Turbo Limited Edition motherboard. The usb ports version was not indicated on the manufacturer website so I take it as version 1.1
My old OS was WIN XP PRO (SP1) and strangly enough even with usb 1.1, I have encountered good speed file transfer from my desktop to an external HDD. I can transfer a 400MB file within 3-4 minutes. I was satisfied then.
I made a fresh WIN XP PRO re-installation 2 days back but this times it was done with straight upgrade to SP2. Now, I will alway get the following message (pic as follow) whenever I plug in my external hdd. The file transferring time has also lenghtened to abt 10mins with a 400MB files.
My usb version remain a doubt although I strongly believe it is 1.1 as you can see from my device manager as below.
The question is why did I not encounter that MESSAGE and the DIFFERENT OF SPEED before with SP1?

Yeah, if you installed with the bundled CD,maybe the problem you will never meet.
Is your board K7T Turbo? Let me find it, haha...
Here it is.
Is it? http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=100&kind=1http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=100&kind=1
First time, I reinstalled my PC, due to not use the relative drivers, my PC can't boot.
So, it will never happen on me.

Similar Messages

Usb & msi k7t turbo

hello i've problem with instaling usb controler on my msi k7t turbo limited edition and win Xp .
system recognize usb controler but there is a message -- " There is a failure during instaling usb controler , abnormal data "
what should I do ?

Hi,
I have not seen this problem before....
Did you install extra USB controllers or are we talking about the on-board controllers???

P45 Platinum USB issues on XP 64 Pro

My mouse (Logitech MX518) works only when plugged into one of the USB ports on my motherbeoad. Any other port and it tries to detect new software - runs through the installation and I get a fatal error message - and the mouse does not work at all. I can't get the Logitech Setpoint software to install either - when installing the drivers I get an error message. I spent 2 1/2 hours on the phone with Logitech and they think it's a USB / Intel control issue. I had a SM Bus controller error in device manager and I used the "INF Update Utility - Primarily for Intel® 4, 3, 900 Series Chipsets (2455KB)" which solved the SM Bus controller issue. but I'm not sure that was the correct piece of software to use as the motherbeoad says its a P45 chipset. The USB issue has existed since I powered up the machine yesterday - the Intel software installation did not impact the problem either way. the MSI CD is useless as it doesn't seem to have any 64 bit drivers. I've downloaded all from MSI that I can find and got the audio and LAN working but I still get the occasional blue screen for really no reason, just surfing the web and bam - blue screen. am I missing something ciritcal for the installation? any thoughts are appreciated on the best way to set up this 64 bit system.

Quote from: mockymock on 24-January-09, 04:47:45
I'll look up the BIOS in a second
BIOS is A7512IMS V1.0 052108
I also made the change so it won't restart automatically if I get a blue screen. And BIOS has USB Enabled. (I'm catching up!)
Alright, now I'm trying to make a bootable CD to update my BIOS.
Update: Got the USB drive BIOS to function per the MSI Forum Flash Tool, but I get an error message - Error File ROM ID incorrect - and the BIOS doesn't update. Still listed as V1.0 and should be V1.7. My P45 isn't listed as supported for Sure Hands, so I haven't tried that. Don't know if that ROM error is the reason my BIOS isn't updating or not. I cleared the CMOS, etc. Not sure why it isn't working.
You have pickup the wrong BIOS file. Latest BIOS for your board is 1.5 ==> http://global.msi.eu/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1479
1.7 doesn't exist.

MSI K7T Turbo Limited Ed. + XP1700+

Hi
I would like to know if my mainboard (MSI K7T Turbo Limited Edition on KT133A) supports XP1700+ 0,13 processor?
I've already read on this site that it doesn't :( but from the other hand I've heard that some people have those Xp1700+ on the same boards and everythings works fine (with bios ver. 3.6).
So...will it work or not? XP1700+ 0,18 works perfect.
Regards

Hi, it may work but there is no official support for it.
http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=25&NAME=MS-6330%20Ver3.0

Driver update for Win 7 USB issue on nVidia chipset systems now available

This patch is needed for the TouchSmart 600 AIO Desktop series if you haven't installed it.
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...

The update is not part of the desktop Win7 update disc from MS or HP - Microsoft has not yet integrated it into Win7, and it is not yet available on Windows Update (it is likely to hit there sometime in January). It was available too late to get it out on HP Update before the holiday break. I don't believe there have been any rolls to the Win7 upgrade disks. I do recommend (while still on Vista) running HP Update and installing all applicable updates - PRIOR to doing the Win7 upgrade. Also - I'd double check the drivers page for your system for any Vista updates as well, best to do any driver/BIOS/Video BIOS updates prior to the Win7 upgrade process. I know that some of them were created before Windows 7 was out - and may not want to install if it sees the newer OS.
As to the fix - this could manifest itself in many ways - but essentially - this resolves system flakyness with USB devices attached . Some internal devices (card readers, touchscreens, some Wireless LAN interfaces) connect via USB - so they could be affected, even if you haven't hooked up anything to your system externally.
Not sure just what problems you were experiencing, so can't say this was the cause (and will be the fix) - but if it applies to your system - I'd definitely give it a shot. I checked a couple of systems that had this update - I see it now on the software drivers and update page for them, so it looks like it rolled out OK.
Happy Holidays...
-DM (an HP employee, but the time and comments here are my own, not my employers)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

24" iMac USB issue

Recently my 4-yr-old 24" iMac has been having USB issues. The only peripherals it will see are the mouse and keyboard (and a printer if it is plugged into the keyboard). Nothing else plugged into the USB ports is recognized - no iPhone, no printer, no hub, nothing. The built-in iSight camera and Bluetooth have also disappeared, and I know they are USB related as well. Genius bar says $450 for new logicboard. I can't find my AHT disk
The USB ports all seem to work with the mouse and keyboard. Any other suggestions? (I have reset PMU.)

Try resetting the SMC, if it doesn't work the first time do it 2-3x. Also try doing a PRAM reset.
_SMC RESET_
• Shut down the computer.
• Unplug the computer's power cord and all peripherals.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
_PRAM RESET_
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys.
Roger

Usb issues on a215

i downloaded the BIOS update to fix the screen going black issue, but now i'm having horrible USB issues.
1. a drive i've used for 3 years can't be recognized by the laptop, no matter what port i put it into.
2. i keep getting that "connection tone" noise as if things are being plugged and unplugged, but i'm not doing anything.
is there an update for this problem? i must admit i've had usb issues w/this laptop forever.

Hi,
So, I suggest you if you have something attached to your USB Ports, then remove it and try to boot your machine up. Remove EVERY
This should help you out.
If you got no success, then try following:
1. Remove your battery and remove AC.
2. Remove EVERTHING attached to your USB ports
3. Put the battery in the machine back and connect AC
4. Try to boot, it would be better to boot in safe mode (accessible through pressing F8 before windows is booting up)
In case of no success, give some feedback, maybe I or other users can give you then more hints.
Greets

Macbook Pro USB issue

Hi All;
I saw lots of discussions about USB problem of Macbook Pro, and i tried maybe all suggestions, i couldnt solve USB issue
I bought my Macbook Pro 13 inc, 500 GB, i5, OS X Lion, 2 days ago and this is my first Mac ...
I cant see my external disk (Philips), Samsung Galaxy S by using USB ports (i tried both USB enterances, but not working).
I checked my Hardware by Apple Hardware Test (extended test done) and it says 'No trouble found'
I checked Utilities and USB devices are not written in the list, only 500 GB SATA disk shown.
I uploaded MacFuse-Tuxera and ntfs-3g-2010 softwares for using USB devices but i cant solve the problem too...
My USB devices are not shown in desktop and utilities lists
How can i solve this problem, my devices work in Windows 7 - PC as usual, but in Macbook Pro, they dont work, please support me. I dont think that it can be hardware problem, Mac is new and devices are ok. Operating systems are different only.
Thanks, Regards.

I solved the problem about Samsung Galaxy S, now i can connect it by changing settings of GALAXY S.
Settings>Applications>Development
Than i plug phone to MAC and now i can see my phone on desktop
I checked my PHILIPS external disk, unfortunatelly it is produced for only Windows operating systems, so i cant use it anymore
My MAC has no USB problem, i can use my 3G USB device too, only Philips external disk failed.
Thanks for your support...

Mac Pro USB issue

I have a weird situation. I have a Mac Pro 8 core 3.0Ghz with 13GB RAM, 4 SATA internal drives, 2 USB external 500 Western Digital Drives. I use bay one of the sata for OSX Tiger and Bay 2 for OSX Leopard (both purchased versions). The problem is when I'm in Tiger the USB drives have a through put of about 3MB and when booted in Leopard they have a through put of about 24MB. I can only guess that it's a driver problem, but I haven't been able to find anything about the fix. I did find that the WD USB Drives have a problem with speed. These WD drives are USB and SATA. When using them as SATA drives they work fine on both versions of OSX. The problem is I need the SATA connections for other drives and just want to use the WD drives as backup. Has anyone got any ideas why the drives perform normally under Leopard and not under Tiger?

Hi southwos,
That certainly is a strange one...
I have heard of several USB issues pertaining to tiger updates, noteably, 10.4.11. It would seem some USB drivers were updated to fix several bugs, but inadvertantly, caused others. The solution it seems, is to rollback to 10.4.9.
The symptoms of this 'unexpected feature' (sic) are that some USB devices seem to operate at USB1.1 speeds.
This only affects a small number of devices, and its the chipsets in said devices that have the conflict.
Certainly hope i have been of help
Cheers
Bryza

COM-port problem with MSI BToes USB Dongle

I´ve had problem to get my Sony Ericsson T610 to work with my MSI BToes USB Dongle, so I tried to update my drivers. Now I have Microstar Bluetooth Software 1.4.2 build 10 but can´t get my Serial Port service to work. In Advanced configuration / Client Applications under "Bluetooth Serial Port" / "Properties", the only serial port I can choose is com0. Does anyone know how to fix this problem?
/Peter

Well, I think i´ve solved the problem. To get the com-ports to work I installed the software. Then I had a problem to get the phone to communicate with Sony Ericssons synk-software and outlook, but suddenly it worked and has worked since then. I have no idea what the problem was but now it works and I´m satisfied.
/Peter

Lion = lackluster, USB issues

I'm very disappointed in Lion. With the exception of a few new features, it's useless and I'm shocked that Apple would publish a product like this. I've wasted $30. I never thought I would say anything like that about an Apple product. Up until now, I've never had any issues with any of the OS's.
Ever since I installed Lion, I've had USB issues. I plug something in and it doesn't work. Specifically, my iPhone, my flash drive and my USB 2.0 card reader. This is all equipment that worked flawlessly prior to the installation.
I've tried all the remedies: restart, plug and unplug the devices, tested the hub, plug and unplug from the iMac itself. Any suggestions?

I haven't heard that reported as a bug in Lion.
Have you tried an SMC reset?
Reset PRAM first.

MSI K7T turbo2 MS-6330 bios ver 3.6..NEED SERIOUS HELP!!

Anybody plz help me.I own a mobo above running amd athlon xp 2000+. My system run well for one week. After dat, my system started to give me problem. It hangs one day and when i reboot my com, the message "Windows protection error. Please restart your computer" appears. I tried already many times to restarted my com..but still fails. So i think maybe RAM problem..so i try to remove and reinstall the RAM. Then my com succeed to boot into windows. Everything run ok..no problem for few days. Then suddenly my com hang again and I juz reboot my com. Then the same message appears again..May i know wat happened to my com.PLEASE HELP ME...:'(
My spec:
msi K7T turbo2 MS-6330 bios ver 3.6
AMD athlon xp 2000+
Asus v7100 Geforce 2 MX400
2x256 kingston ram(pc133)
2x20g maxtor hdd
1xTV tuner card
1XSb live soundcard

Try uninstalling the sound card and any other nonessential components. Also, when you uninstall click on the "show hidden" items and remove duplicates. Don't remove anything that you do not know exactly what it is including any marked "unknown" but if you see multiple sound cards or cd-roms, etc. remove them. Then see if you boot ok and gradually reinstall items.

Msi k7t pro auto re(boot)

hi , ive got a msi k7 t pro and sometimes when i am gaming then my pc shuts down , and while it is booting 4 dleds , then i have to wait sometime before i can boot again , or reset cmos , it is mostely when i play halflife for some time , or after 20 seconds of warcraft 3 ,
specs :
amd 1400
geforce 2 pro
msi k7t pro ms6330
256 kingston , 128 samsung sdram
creative soundblaster live
cpu temp 45
case temp 30
in the summer the reboots are the most :(

See this topic:
http://www.msi.com.tw/program/service/forum/index.php?threadid=75&boardid=13&page=1
You probably have the same problem.. I have it too :(
Good luck,
Faachman

MSI VOX USB

Hell to all
LAST month i buy MSI VOX USB but after runing TWO hour it start white and repeat the same when i close and start againe. i upgades the driver but it still not work.

Check your computer. Maybe you video board doesn't support this. I have mine since last year and is working quite fine.

MSI K7t Turbo2

Hello. I Speak Spanish. I can´t speak English. but...........
Does MSI k7t Turbo2 Support any Linux Mandrake ?
I want to install Mandrake 9.0. It doesn´t matter if is higher or lower.
I only want to know if it is possible or not.
Excuse me for my English.
Thank you very much.

..................................?????
Please..my english is very bad.
Help me pleaseeeeeeeeee...........

MSI K7T - USB ISSUE

Similar Messages

Maybe you are looking for