MSI K8N NEO 2 : bios 1b o 1c what it doesn't work

Am trying to try the bios 1c beta, 1b beta or 1b officials in 1.8 substitution (with this all magnificently works however cannot make the pendrive boot usb)!!
The problem is that the controller raid is not recognized me in any way...
Have already tried to train all the ides, the satas and the raid in the bios but there is no anything to do, with these bioses doesn't see me neither the raid of it the ides to which a DVD and a dvdrw are connected!!!
I have noticed under dos during the start that goes out this message:
Warning: Have option rom Khan not be invoke (vendor ID10DEH Device ID 00DFH)......
What can you/he/she be?

Quote from: perucho07 on 16-January-06, 01:08:56
Hi Mike,
Did you use MSI Live Update 3 in order to Flashing from 1.8 to 1.B0 BIOS? I did it without any problems!
Please check in your CMOS all RAID sattings are enable.
Also you may use the NVIDIA RAID diskette in order to re-ensamble your RAID arrenge.
Hope that's helps.
Cheers,
Pedro
The bios is correctly adjourned and I has trained all the voices that concern the ide and the raid...
The pc jams before starting windows
Quote from: Okay on 16-January-06, 08:11:35
https://forum-en.msi.com/index.php?action=search2
I write from the italy and I don't know well the English therefore is me difficult to find a solution through the looks for!
My configuration is:
Enermax CoolerGiant 535W
MSI K8N NEO2 Platinum
RAM 2*512 GEIL Ultra X PC4400
Winchester 3500 + Zalman 7000B CU
2 hdd Western Digital 10K in raid 0 connected to the doors 3 and 4
1 Controller Adaptec 2940UW (in the 4° slot PCI)
2 hdd in external bos usb
1 DVDrom connected to the ide 1
1 DVDRW connected to the ide 2
With the bios 1.8rev.3 of NFM all works very well however I don't succeed in effecting the pendrive boot usb and therefore I have decided to adjourn the bios.
I have tried the version
- 1b officer
- 1b mod
- 1c mod sideffect
With everybody and three these versions of bios, during the initial phase of I start some pc, the controller raid is not recognized me to which the hdd are connected in raid 0 and therefore the pc doesn't set out!!!
I have trained all the sata, the ide, etc. etc. and with the bios 1.8 work well everything.
How can I do??

Similar Messages

MSI K8N NEO-FSR BIOS Flash Corrupt

So there was an updated BIOS for my motherboard version 1.8 while I had 1.7. I went ahead and updated and it went fine. But then I noticed that my CPU speed was dramatically reduced and the multiplier was set to 5.0 giving me a 1ghz CPU. While I thought maybe the CMOS needed to be cleared I went ahead and did that but to no avail I wasnt able to fix that problem. I went over to the MSI Live Update to check for a new BIOS update and it had said that I had 1.8 version while the current version is 1.7. Just a few days before it said 1.8 was the latest. Hmmm. So I went off to the MSI website to find version 1.7 and downloaded it. To my surprise version 1.8 was available on the MSI website. I used the WinFlash program to flash my BIOS. Before doing so I closed all open applications including anti-virus, browsers, chatting programs, and so forth. But the flash was going VERY slow and it stopped with unable to verify bios. This made me scared pooless. After I restarted to no surprise my computer started up with BIOS Checksum error and asked for a floppy. I didn't have a floppy drive connected at the time but the computer shut itself off automatically. So I went and connected and floppy and looked up online at the MSI website about how to recover the BIOS. I found it and for my AWARD bios i followed the procedure. But each time it detects the floppy drive and then the computer shuts itself off. Even if i have no disc inside the floppy drive it'll shut off. Is it supposed to do this? I am unable to reflash my BIOS because of this behavior. I don't know what the cause of this problem is now. Did maybe the recovery portion of the BIOS get corrupted too? Please help. Let me know if you need any more information. Thanks in advanced. My specs are below btw:
MSI K8N NEO FSR
AWARD REV. 1.8
AMD ATHLON 3200+ 754
PDP 2x512MB RAM
NVIDIA GeForce 6800 Ultra
Ultra-X 500watt
WD 160GB IDE, Seagate 200GB IDE
Pioneer D-A07
Windows XP SP2, Gentoo Linux, Ubuntu Linux

Okay I tried taking unnecessary stuff out but it didn't help. I'm actually having the same problem this guy is having : https://forum-en.msi.com/index.php?topic=86508.0
Hmm looks like i might be in for a new motherboard or i can try the RMA process but I dont know how long that will take. Other than that...I dont know what to do. I could buy myself a new bios flash chip but they're damn expensive and I'd rather just buy a new motherboard. On another note I noticed that when I boot up the pc and i see that it detects the floppy I immediately pressed the reset button but it'll still shut down. So it's as if there is a timer somewhere. What the hell is up with this? It also seems MSI didn't release bad BIOS releases for my board only. Seems like people with other boards are having tons of problems with the latest BIOS releases.

Msi K8T Neo-FIS2R built in 1394 shows up but doesn't work?

I have a msi K8T Neo-FIS2R, and the built in 1394 does not work. It shows up in windows but doesnt work when plugged in.
I have tried disabling and reenabling in the bios, and disabling almost all other things to eliminate an IRQ problem to no avail.
I have an audigy 2 ZS also which has a firewire port, which is working, but I'd like to have access to the mainboard's ports as well.
any suggestions?
Thanks
AMD A64 3400
thermaltake venus 12 heatsink.
2x512 mushkin lv2 pc 3500 bh-5
msi K8T Neo-FIS2R
western digital 120 gig SE HD with 8mb
soundblaster live audigy 2 ZS
32x liteon burner
Built by ati 9800XT
TV LEADTEK/DELUXE TV2000XP TV/FM R
LIAN LI pc-82 with window

Welcome
What bios version are you on?The latest on the site was supposed to fix this problem-the 1.6-but dunno if it did or not,flash it to latest then have a look.

MSI K8N Neo Platinum ,bios issue or HW

Hi i am using a system like in the signature described (usind adata instead of twinmos) im cooling with a prometeia system , and the board ist watercooled.
My CPU is a Newcastle (@2800mhz ) my graphic card is the normal 9700pro (it makes no diff in oc if the card is clocked or not)
Now i got some serious problems , i can´t run high fsb sync ? Why ? i wasn´t able to do this with the twinmos ram , but i read twinmos has some serious problems with the nforce3, so i purchased 2*512 mb adata.
I tried different dimm combinations (1/2 ; 1/3) that didn´t made any difference
I tried different bios (1.2 1.25 1.31 1.1) but this didnt made any difference either (using 131 now)
my pci/agp is fix (always 66,67/33,34 in clockgen so its just perfect)
i don´t use any SATA devices (all disabled in bios)
What is my Problem ? is it only a bios problem , or is there hardware in my sys which makes probs? Could it be an IRQ Problem (got 2 pci cards in slot 3 and4 its an IDE raid controller and a soundcard)
i hope there is any help for me :(

Well this is the second time someone mentions problem with Adata DIMMs:
https://forum-en.msi.com/index.php?threadid=55475&sid=
Maybe it's about time to post it here:
https://forum-en.msi.com/index.php?threadid=51997&sid=
For all I can think of right now, either run the board with a single module or both with 5:6 divider

MSI K8N Neo-FSR BIOS

Where can I download old version of BIOS for my MB? Curently I have v1.8 (this version was on MB when i bought it) and I do not have USB2.0 support with this version of BIOS. I need v1.7. So if anyone knows link to it, please post it.

Here you are:
-->7030nms.170<--
Right click and choose "save target" .

Overclocking of MSI K8N neo platinium

MSI K8N neo platinium, Bios 1.4
Athlon64 3200+ 2000Mhz (200Mhz x10) 1MB cache, Clawhammer.
Geil 2x512MB DDR PC3200 400MHz Value CL2,5 5ns Aluminium Heat
Club3D 9800pro@xt
Hitachi Deskstar 7K250-160 160Gb 7200rpm 8Mb cache S-ATA
400w psu
Before when I had just one memory chip(512mb in slot 1), I had no problem to run 235Mhz x10. All I had to do was the following :
Put hdd in SATA 4
Set AGP to 68Mhz
Adjust cpu voltage from 1.45 - 1.55v
Set mem. clock to 166Mhz (sense it will increase as you raise the FSB)
Now I`ve bought one more identic memory chip. I have now 2x512MB memory placed in slot 1 and 3.
I followed the same steps as above, but with terrible results. Max 215Mhz x10 stable.
I`m pretty sure it`s not the memory chips that`s the problem, as they run stable
with original settings ( witch is higher speeds (200Mhz) than those I run on the memory when overclocking (166 - 195Mhz).
I would be greatfull for any tips or solutions that you might think would help me (and others) to reach better o/c results.

try slots 1+2 instead of 3, i have found that i can't oc very well in 1+3 either.

MSI K8N NEO PLAT + CD / DVD-RW Drives

Hi, i have the msi k8n neo plat. I recently had to replace my old mobo due to the old power supply blowing or something. So i got me a 480watt enermax coolergiant psu. Replaced the mobo for a new msi k8n neo plat. Put the mobo in and psu. Working fine and dandy. Now i installed 64bit xp to primary, and ive had it running for for about 2 weeks. Went to install linux to the second hard drive, so i changed the boot order, saved settings and went to load disc...however now my cd and dvd drives dont work, and they dont work in windows either.

Can anybody tell me what i should set the cpu fsb frequency to in the bios.
I just read this in the faq
What is the fsb speed of this cpu?
Depending on which FSB you are asking about: The Athlon 64's have the memory controller built in (which was previously part of the Northbridge on the motherboard) which uses up to 200MHz DDR Memory (400MHz FSB) The HyperTransport link from the CPU to the rest of the motherboard runs up to 800MHz. Just to expand on my answer... The HT link is 800MHz, but it's 16 bit in size (2 bytes worth of data per clock) the total bandwidth of the HyperTransport link is 3.2GB in total - 1.6GB sending data to CPU and 1.6GB receiving data from CPU.

[ram]Kingston + MSI K8N Neo-FSR?

my system:
AMD Athlon 64 3000+, 2.0ghz
MSI K8N Neo-FSR(bios 1.40)
Asus V9999 GeForce 6800 256MB Gamer Ed. AGP
Audigy 2 zs
Win xp pro sp1
Hiper power 420W
I just bought the Kingston ValueR. PC3200 DDR-DIMM 1024MB Kit w/two matched ValueRAM 512MB.
When I boot up the pc just makes a sound piip piip piiip continuing....
I can't do anything since it wont boot up & i tried diffrent dimm slots but it didn't work :(
Earlier i've set the settings to t1 & the volt to 2.56 from before. Does this has something to do with it ? How can I reset the bios if I can't even get in dos :s
What should I do ?

Reset the cmos using the Jumper, is you have a manual it will show you where this is located. It will set the Bios back to Default,then you have to set it up the way you want it again. To get the RAM working set it to DDR333=166, that should sort out the No Post.
Your going to be out of luck here as the 'support' is basicaly non-existent, or just replies from people trying to get their post count up higher, I'm afraid to say.
Good luck.

Kingmax Hardcore DDR500 with MSI MS K8N Neo Platinum (Bios Version 1.40)

I am interested in Kingmax Hardcore DDR500 (PC4000) 512MB DDR-SDRAM. Currently, I’m using MSI MS K8N Neo Platinum (Bios Version 1.40) with AMD 64bit 2800+ & MSI MS 8907 FX5200-TD128 AGP Card.
Please advice whether the Kingmax Hardcore DDR500 (PC4000) 512MB DDR-SDRAM compatible with my systems.

The "safe mode" that the BIOS message refers to is not related to Windows' Safe Mode. The BIOS safe mode lets you un-do any overclocking or memory settings that might make your computer so unstable that you can't even get into the BIOS settings to change them. In that case, you hold insert while powering on to reset the BIOS to default safe values.
As for your problem getting into Windows' Safe Mode. If you upgraded from another motherboard that uses a different chipset, or if you somehow got the wrong chipset drivers installed, then the old AGP GART or chipset drivers will cause the system to halt/reboot very early in the Windows boot process even in safe mode. I've run into this problem before and its tricky. Best thing to do is switch back to the old motherboard, then go into safe mode and remove all chipset-related drivers, and then switch back to the new motherboard. If you can't do that, try running system repair from the windows setup CD. And failing that, you'd probably have to fully re-install the OS.

Bios from my Msi k8n Neo Platinum (socket 754)

Wich is the last beta bios from my Msi k8n Neo Platinum (socket 754) ?
And where download?
Thanks

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

Msi k8n neo platinum - The 1394 delete from bios device list

hi.
the line where 1394 was is now empty , i try everything i flash the bios and stuff
no luck for me???
it look like the 1394 onboard conroller is dead?

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

MSI K8N Neo V2.0 Bios update crashed

Hi there,
I just thought it would be an good idea to update the bios pf my MSI K8N Neo V2.0 retail mainboard via Live Updater 3. But near the end WinFlash told me there was an error and form then on I get a checksum error while booting. I cant find any bios data on the website.
Is there anything I can do to fix that? How can I create a floppy without Live Updater?
Hope you can help me.
Dennis

Quote from: vI3Tz on 10-February-09, 17:09:09
My mainboard is this one http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&prod_no=217
Its an Award BIOS. Which version I cant tell you but I did not update it before.
That's V2, not V2.0 ==> http://global.msi.com.tw/index.php?func=prodcpusupport&maincat_no=1&cat2_no=&cat3_no=&prod_no=210#menu
Paste full details about the mainboard, look here how to ID ==> https://forum-en.msi.com/index.php?topic=113146.0
Or paste mainboard SN.

LiveUpdate broke the bios on a MSI k8n neo v2.0, need bios and recovery files.

LiveUpdate broke the bios on a MSI k8n neo v2.0, it need bios and recovery files. I do not know the serial number. The ERP is 070. Its a "k8n neo v2.0" "ms - 7030 ver: 20c" mainboard. I don't know the previous bios version. The computer prompts for a recovery disk during an AWARD BootBlock BIOS v1.0 initialization.
Thank You.

Here it is
[K8N Neo V2.0 series ==> 601-7030-070/080, BIOS 5.xx]
Sign On: K8N Neo V2.0 Series W7030NMS V5.4 031506 14:55:37

Unable to install windows XP på MSI K8N NEO

Hi!
I have problems installing windows XP (SP1) with MSI K8N NEO Platinum Edition. After I bootet my computer (I build it myself) I noticed I had extrem cpu temperatures (65-70 degrees celcius). A quick search on the net indicated that a bios-upgrade might solve the problem, as my current bios probably showed too high temperatures.
As I had already installed windows XP i downloaded the bios and upgraded using the msi-windows-bios program. And, after the reboot my cpu temerature was 20 degrees lower (45 degrees celcius), which is more normal. But during the bootup of windows I got a blue-screen (or, actully a blue blink, just for a nano-second), and then my computer rebooted.
As the system were fairly new and didn't contain any importaint data, I decided to try to make a fresh install of winXP. But now I get a blue-screen during the installation, when the progress-bar says "installing devices", the blue screen appears when it is about 75%.
The installation of XP went fine before the bios upgrade, and I used XP for several hours without any problems at all - except the high cpu temperatur. Now my cpu temeperatur is acceptable, but XP wont install/boot.
I have tried to disable all the integraded devices (such as firewire, network, sound card etc) in the bios menu, but the XP install still provides a bluescreen during the installation of devices.
My system:
A64 3000+
1024Mb RAM (corsair value, I believe)
Samsung SATA 160Gb HD
Matrox Millenium G400 (I know it is old)
NEC 2510 DVD Burner
As I said, this is propably caused by the new bios, as it did work with the old one. I have also tried "Load failsafe defaults". Do you guys have any ideas of how to fix this? Should I (can I) downgrade my bios (I do not have a floppy drive in the computer).
.wirrum

Hi wirrum,
I see you are Swedish (the på was a give away).
I recently aquired a MSI K8N Neo2 from Komplett - where did you get yours from? maybe that have a bad batch because I am seeing the same problems as you.
I have two different problems , the same stability problems you are seeing and problems with the keyboard (ps2) not always starting up. I'm currently at Bios V1 and after seeing your problems I might just wait with V1.1 unless everything else fails.
Im considering an RMA to komplett soon and asking them for a motherboard that works (maybe from another manufacterer).
I have a decent PSU (Antec Truepower 480) and DDR400 from Kingston thats on their reccommended list, no overclocking, stable settings, I built the thing with ESD protection and carefully. Not overly impressed right now.
Some suggestions - turn off AGP Fastwrite, turn on SATA DMA access if you are using SATA. Turn off any Overclocking, move your memory around , try just one stick in DIMM 1 see if that helps.
I finally managed to get through an XP install but it took 6 hours to install. And it will occasionally stutter then shutdown entirely.
Quality..

MSI K8N NEO 2 : bios 1b o 1c what it doesn't work

Similar Messages

Maybe you are looking for