MSI K8N Neo 4 CPU cooler is slowing down ?!

Hi everyone and HAPPY NEW YEAR TO ALL AND ALL THE BEST!!!
I have brand new MSI K8N Neo 4 mobo and something strange is going on. CPU cooler on Venice 3000+ s939 in BIOS is rotating on 2200 RPM, but when i start Win XP, Core center and Everest are showing only 1000 RPM.  Cool'n'quiet is disabled in bios.
Is there some setting that  I did'nt see or what?
Thanks for your help in advance.
Pufta.

Hi!
Thanks Hodgie_ns for your fast reply, but it was not set up in Core Center for Cool'n'quit to slow down, it was on user setting to maximum.
Problem resolved by connecting the CPU cooler on the other connector for SYS FAN for little time, then I connected back to the CPU FAN connector. Since then, it is working on 3000 RPM all the time. Funny?! Wird?! Bug?!
Thanks and go for it!

Similar Messages

  • MSI K8N Neo Platinum - CPU Cooler?

    Hi there, this is my first post to the forum and hope that someone can help
    Bascially I've just purchased a MSI K8N Neo Platinum mobo to use with an AMD 64 2800.
    I'm wondering if I should use the stock CPU cooler or look to purchasing a cooler such as a Zalman? I want to keep the computer as quiet as possible.
    I've recently read that it would be better to use the Cool and Quiet option with the stock CPU cooler instead?

    Chris,
    If you don't mind a used one, there are probably about a hundred thousand available ones from people in these forums who has upgraded their heatsinks, and that's about everyone
    The problem is, we dont want to give them up. We bought the retail package with fan not because of the free heatsink/fan, but because of the 3 year warranty that you only get with said combo.  To invoke the warranty, we'd have to return everything, including the heatsink/fan, so we hang on to it and let it collect dust.
    So, for an aftermarket fan. If you don't plan to overclock, ever, the thermaltake silent boost K8 will do, although it is nowhere NEAR the 21dB that tt claims. They are known for shall we say, exaggerated claims. But it's certainly quieter than the stock HSF, and it's available everywhere.
    Note that the "silent boost k8" is different from the "silent boost". The latter is for socket 462 I think.

  • MSI K8N Neo 4 Platinum Smart CPU Fan reports 0 rpm ?

    Hi
    I have a MSI K8N Neo 4 Platinum (MS-7125) motherboard with an Athlon 64 3700+ CPU and an Arctic Cooling Silencer Ultra 64 HSF.
    In the BIOS setup, in the 'Monitor H/W' area you can set something called the 'Smart CPU Fan Target'.
    o  If I set this to disabled, it reports a fan speed of about 2,280 rpm.
    o  If I set it to 40°C, it reports a fan speed of 0 rpm !  (the fan is turning)
    The MSI Core Center utility and Everest Ultimate also both report the fan speed as 0 rpm.
    I assume that if I disable Smart CPU Fan, the fan always rotates at max. rpm; if I set it to 40°C, the fan runs at a slow speed until the temperature exceeds 40°C, at which point it speeds up (likewise if I set it to 50°C or 60°C).  However, the fan IS turning.
    Can anyone explain this ?  I would like the reassurance of having the CPU HSF speed reported.
    Incidentally , the PSU is an Akasa AK-P460FG
       (3.3v = 30A, +5v = 30A, +12v1 = 14A, +12v2 = 15A)

    Very old post yes but I feel the need to reply anyway because I have the same problem myself.
    Very strange and would be nice to hear if any more of ya guys out there can see the same. 
    Patrick

  • Problems with 64 3200+ on MSI k8n neo platinum.

    AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
    MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
    Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
    Okey here it comes..
    I installed everything and all seemed to work okey,  until i threw in the XP install cd and began my install..
    in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and  the install moves on,  this accurs 4-5 times and then it gives me a BIG  "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
    I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
    changed hdd, change gfx-card. change psu,  removed all no-need pci-cards..
    but still same error, i aint no expert so i might have missed something in bios or something :(
    please help me if you can..

    Flashing bios with memory errors is a veeeeery bad idea .
    Almost guarantied to ruin your bios chip with bad data block.
    That this even is suggested with mem errors , well .
    You need to resolve the mem errors before doing anything else.
    The windows xp install routine is a very heavy user of cpu and memory
    and will fail if you have mem errors like you have.
    Some things to try is entering bios and change auto settings on cpu voltage
    giving it 0.5v more than default .
    Set the memorys voltage to vendors max approved voltage
    which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
    Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
    Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
    Disconnect all devices not needed for a windows install ,things can be added later.
    Have only the hd that os is to be installed to , one cdrom , floppy , memory and
    gfx card .
    Disconnect USB case front connector (cause corruption and strange faults if
    USBOC pin is connected)

  • MSI K8N Neo Platinum with Vapochill Case problems - Help anyone. :)

    Hi all,
    Had a bit of a tricky problem and as Im new to this board I have no idea what could be causing this.
    First all all system specs:
    Athlon 64 3700+ Clawhammer
    MSI K8N Neo Platinum -
    1 gig Corsair XMS ProL Low Latency Ram (2 x 512mb)
    Nvidia Gefore 6600GT
    1 x WD Raptor 10000rpm HD
    NEC 2500a DVD writer.
    Eye-T 550w PSU.
    Vapochill SE Case with installed Vapochill Phase change cooling.
    Here are photos of it in its present state, you will notice that it isnt installed in the case at the moment.
    The reason for that is because the two wont work together and I want them to so so bad...
    So, hopefully someone here can save the day for me - here goes.
    I have tested the Motherboard and all other componants outside of the case and everything runs smoothly and there are no problems what so ever, great.
    I have also retested the Vapochill case with another motherboard and that also works without a hitch.
    The problem comes when I insall the MSI board into the system, all hooked with a really basic setup, PSU, Case cooling, CPU and Ram. Flick the on switch on the power suply and the system turns on for around 1/2 a second then turns off again. I found this strange because it soundnt come on at all until I press the power button.
    If I press the power button the same thing will happen over and over.
    I have tried a different powersupply and this does nothing at all.
    I have checked for shorts and there is no possible way it is shorting on anything.
    I have a fan plugged in where the CPU fan would go and this doesnt help.
    I have taken it back out and tested it again and it still works ok.
    Does this sound familiar to anyone? Are there any secret Bio's menu's that would have an option that would solve this?
    Any help would be greatly appreciated.
    Glenn

    When you are running the MoBo standalone, what are you connecting to the Power, Reset, HDD, etc. pins ?  Are you using the wires from the Vapochill case, or something else ?  It looks like a single cable with an intermittent switch (red/white cable).  I once had a similar sort of problem and it was because I hadn't connected up (the incredibly fiddly) cables correctly.  Other than that, I would have gone for a short of some sort - but you have checked that already, so . . . .
    As to the system starting to power-up when you switch on the PSU, I wouldn't worry too much about this.  It seems to happen from time to time with some of my systems - amongst other things, the BIOS can be set to resume to previous state after a power-fail.

  • MSI k8n neo platinum hangs after post single beep

    Today I powered off my computer, and when I tried to power it back up the x850 fan just runs at full speed, and never drops to idle and the screen stays dark. If I reset the bios then it will post as far as asking to press Del to enter setup, but freezes at that point. This thing has been running like a champ and this is the first problem I've ever had! I unhooked/unplugged everything but the keyboard/video/ram/cpu. Tried running with four different memory modules in single channel and dual channel but no luck there either. None of the hardware below has been changed in the last six months. Any ideas? TIA!
    The indicator lights read:
    R G
    R G
    According to the manual this means:
    Testing Base and Extended Memory
    Testing base memory from 240K to 640K and extended
    memory above 1MB using various patterns.
    AMD 64 4000+
    MSI K8N Neo Plat Rev1
    PQI BH5 512x2
    ATI x850 AGP
    SATA 10k RPM Primary
    Antec P/S

    Quote from: flobelix on 07-February-07, 07:09:19
    Core2Duo E6400 would be a gain of about 15% compared to 4000+ ( in games 1024x768, no aniso or aa). Quality options and better resolution would shorten the gain. Other applications than games e.g. cinebench would run a lot faster on the C2D. The main advantage compared to the 4000+ would be dual core because many future games will be optimized for this. Question is: Is this worth $272?
    With only one 7600GT installed you won't be able to play most of the new games in full detail because of lacking 3d power although Core2Duo installed. The gain of cpu performance will be therefor useless (if main focus is on gaming). 7600GT sli-array would be an option for full detail and using more cpu power but it would also be slower than one 7950GT for nearly the same amount of money spent for 2 7600GT.
    1. If you need a gaming pc I'd only buy a new C2D if you can also afford high end vga. Otherwise cpu power is wasted.
    2. 7600GT is only an option if you want to save money now and you want a second one later. Buying two now to get a sli-array isn't very clever. Less performance than 7950GT, same price.
    3. Buying one gig of ddr2 isn't very clever either. More and more applications need more than 1 gig (for example vista!). When changing to ddr2, change to 2 gig dual channel kit.
    4. Getting $300 for your old stuff seems quite optimistic to me.
    Conclusion: Save your money for better vga! Take back 7600gt, keep old vga and 4000+, wait for a little time and buy Geforce 8800 GTS. Increase of gaming performance would be unbelieveable. After providing high end vga you can upgrade to C2D in next step and receive a noticeable increase of performance in all kinds of applications.
    Hmm.. very good points. I went and read some reviews of the upcoming 8600 and 8800. They are quite impressive for the money. I believe I'll return everything and find a limp-a-long $50 mobo to replace the dead msi. It looks like holding out for quad core with dual SLI is the real gain over my current setup. On a side note I won't be running vista until after sp1 or possible sp2. No tangible benefit to me! What suggestions do you have for a solid performing mobo for the following:
    socket 939
    4 240pin DDR slots
    AGP (My X850 XT is still strong enough for everything I do)
    SATA 1.5 (no need for the faster one as I have none of those drives)

  • MSI K8N NEO-FSR BIOS Flash Corrupt

    So there was an updated BIOS for my motherboard version 1.8 while I had 1.7. I went ahead and updated and it went fine. But then I noticed that my CPU speed was dramatically reduced and the multiplier was set to 5.0 giving me a 1ghz CPU. While I thought maybe the CMOS needed to be cleared I went ahead and did that but to no avail I wasnt able to fix that problem. I went over to the MSI Live Update to check for a new BIOS update and it had said that I had 1.8 version while the current version is 1.7. Just a few days before it said 1.8 was the latest. Hmmm. So I went off to the MSI website to find version 1.7 and downloaded it. To my surprise version 1.8 was available on the MSI website. I used the WinFlash program to flash my BIOS. Before doing so I closed all open applications including anti-virus, browsers, chatting programs, and so forth. But the flash was going VERY slow and it stopped with unable to verify bios. This made me scared pooless. After I restarted to no surprise my computer started up with BIOS Checksum error and asked for a floppy. I didn't have a floppy drive connected at the time but the computer shut itself off automatically. So I went and connected and floppy and looked up online at the MSI website about how to recover the BIOS. I found it and for my AWARD bios i followed the procedure. But each time it detects the floppy drive and then the computer shuts itself off. Even if i have no disc inside the floppy drive it'll shut off. Is it supposed to do this? I am unable to reflash my BIOS because of this behavior. I don't know what the cause of this problem is now. Did maybe the recovery portion of the BIOS get corrupted too? Please help. Let me know if you need any more information. Thanks in advanced. My specs are below btw:
    MSI K8N NEO FSR
    AWARD REV. 1.8
    AMD ATHLON 3200+ 754
    PDP 2x512MB RAM
    NVIDIA GeForce 6800 Ultra
    Ultra-X 500watt
    WD 160GB IDE, Seagate 200GB IDE
    Pioneer D-A07
    Windows XP SP2, Gentoo Linux, Ubuntu Linux

    Okay I tried taking unnecessary stuff out but it didn't help. I'm actually having the same problem this guy is having : https://forum-en.msi.com/index.php?topic=86508.0
    Hmm looks like i might be in for a new motherboard or i can try the RMA process but I dont know how long that will take. Other than that...I dont know what to do. I could buy myself a new bios flash chip but they're damn expensive and I'd rather just buy a new motherboard. On another note I noticed that when I boot up the pc and i see that it detects the floppy I immediately pressed the reset button but it'll still shut down. So it's as if there is a timer somewhere. What the hell is up with this? It also seems MSI didn't release bad BIOS releases for my board only. Seems like people with other boards are having tons of problems with the latest BIOS releases.

  • Msi K8N Neo with Athlon 64 3200

    I just recieved the parts today 1x Msi K8N Neo Mobo and 64 3200 procesor, so far ive only been running it a few hours and allready i have had a lot of problems with it, first off the temp of my cpu is at 64oc when idol, and about 72oc on full load, I have the Coolermaster Hyper6 KHC-V81 heatsink with 2 mounted fans, and im sure thats more then enough to cool any proccessor?? Next up after restarting the computer the mouse/keyboard do not work when you get back into windows. i have no idea why tried all sorts of problems such as reinstalling drivers, Next up the board reads the default clock speed at 2.2ghz, am i wrong but isnt it meant to be 2.0ghz, both in bios and windows, it also says that my cpu has 512kb l2 cache when it is meant to have 1mb.
    Needless to say i am not a happy bunny  
    if any1 has any ideas on what could be causing this please let me know as soon as possible before i throw my rig out the window
    P.s The multiplier is on defualt, but it is 11x, isnt it soposed to be 200X 10??

    As with the K8T800 board, MS products have been a thorn in the side. Try some cheap-o mouse and keyboard until you get your system stabilized. Make sure your BIOS settings accept OS2 and Plug 'n Play...turn off legacy support. Make note of all BIOS settings and which ones are enabled/disabled.....'cause we will be looking for your assistance on a lot of initial boot-up questions! Thanks very much =DNA=

  • Strange Temp Jumps on MSI K8N Neo-FSR

    Hi!
    I got a MSI K8N Neo-FSR.
    My temp in speedfan jumps from 36 to 42 just like that then back to 36.
    It's pretty disturbing to see that.. And I wounder does someone else have the same problem? Then I don't know how accurate the new BIOS for this mb is. On the Abit I hade before the temp was 34 idle.. Today I allso bend the small metal pice that you screw in on the Zalman ALCU cpu cooler so it would fit and press harder, then the temp sank from 42 to 36 idle. And the CoreCenter shows a temp on 44 now and speedfan 36 but jumps to 40-42 just for a second.
    Anyone know what the problam can be? It's kinda anyoing when you OC some because you don't know the right temp.

    You should try and update your bios , speedfan and core center showed different temperatures for me too until i updated my bios. On the other hand i have a different problem, that is: when i start my pc(cold start) my idle temperature is 40 degrees but if i restart it drops to 30, does someone have any clue why?

  • Unable to install windows XP på MSI K8N NEO

    Hi!
    I have problems installing windows XP (SP1) with MSI K8N NEO Platinum Edition. After I bootet my computer (I build it myself) I noticed I had extrem cpu temperatures (65-70 degrees celcius). A quick search on the net indicated that a bios-upgrade might solve the problem, as my current bios probably showed too high temperatures.
    As I had already installed windows XP i downloaded the bios and upgraded using the msi-windows-bios program. And, after the reboot my cpu temerature was 20 degrees lower (45 degrees celcius), which is more normal. But during the bootup of windows I got a blue-screen (or, actully a blue blink, just for a nano-second), and then my computer rebooted.
    As the system were fairly new and didn't contain any importaint data, I decided to try to make a fresh install of winXP. But now I get a blue-screen during the installation, when the progress-bar says "installing devices", the blue screen appears when it is about 75%.
    The installation of XP went fine before the bios upgrade, and I used XP for several hours without any problems at all - except the high cpu temperatur. Now my cpu temeperatur is acceptable, but XP wont install/boot.
    I have tried to disable all the integraded devices (such as firewire, network, sound card etc) in the bios menu, but the XP install still provides a bluescreen during the installation of devices.
    My system:
    A64 3000+
    1024Mb RAM (corsair value, I believe)
    Samsung SATA 160Gb HD
    Matrox Millenium G400 (I know it is old)
    NEC 2510 DVD Burner
    As I said, this is propably caused by the new bios, as it did work with the old one. I have also tried "Load failsafe defaults". Do you guys have any ideas of how to fix this?  Should I (can I) downgrade my bios (I do not have a floppy drive in the computer).
    .wirrum

    Hi wirrum,
     I see you are Swedish (the på was a give away).
     I recently aquired a MSI K8N Neo2 from Komplett - where did you get yours from? maybe that have a bad batch because I am seeing the same problems as you.
     I have two different problems , the same stability problems you are seeing and problems with the keyboard (ps2) not always starting up. I'm currently at Bios V1 and after seeing your problems I might just wait with V1.1 unless everything else fails.
    Im considering an RMA to komplett soon and asking them for a motherboard that works (maybe from another manufacterer).
     I have a decent PSU (Antec Truepower 480) and DDR400  from Kingston thats on their reccommended list, no overclocking, stable settings, I built the thing with ESD protection and carefully. Not overly impressed right now.
     Some suggestions - turn off AGP Fastwrite, turn on SATA DMA access if you are using SATA. Turn off any Overclocking, move your memory around , try just one stick in DIMM 1 see if that helps.
     I finally managed to get through an XP install but it took 6 hours to install. And it will occasionally stutter then shutdown entirely.
      Quality..

  • *UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

    Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
    Last Updated: Thursday July 15th, 2004
    Bioses:
    (In order of date released.)
    1.1b3 - (Download)
    - Pre-1.1, given to reviewers to use in their reviews and benchmarks.
    - Less stable, but supposedly you get slightly better overclocks.
    1.1 Official - (Download)
    1. This is AWARD BIOS release
    2. This BIOS fixes the following problems of the previous version:
    - Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
    - Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
    1.2b5 - (Download)
    1.2b7 - (No Download Yet)
    1.2b10 - (Download)
    - First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
    1.2b12 - (Download)
    - Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
    1.3b1 - (Download)
    - Another attempt to fix temperature problems?
    - Possibly fixes cold boot/power light issues?
    1.2 Official - (Download)
    1. This is AWARD BIOS release
    2. This BIOS fixes the following problems of the previous version:
    - System can't resume from S3 sometimes when install USB device.
    - Support K8 Sempron CPU.
    - Turn off keyboard LED in S3.
    --Quick Guide for flashing BIOS, provided by MSI--
    1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
    2. Press "Delete" and go to BIOS setup while computer bootup.
    Check BIOS advanced features and see if BIOS flash write control is enabled
    (This option must be enabled. If you can not find this setting, it means the BIOS can be
    flashed.)
    3. Boot from MS-DOS boot diskette and get a:\> prompt.
    4. Type "", then press ENTER
    5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
    6. After flashing complete, remove floppy and reset the system .
    7. Press DELETE or F1 when prompted at first reboot after flashing.
    8. Load BIOS optimized defaults, then save settings and exits.
    Drivers & Needed Files:
    (Note: All these drivers are for Windows XP.)
    Leaked Nvidia nForce3 Chipset Drivers Version 4.40
    (Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
    *NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
    More leaked drivers? Seems some parts of the drivers are older and some are newer.
    1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
    2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
    3. Nvidia nForce3 Chipset Drivers Version 4.24
    4. AMD Athlon 64 Processor Driver Version 1.1.0.14
    5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
    (The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
    5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
    (The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
    6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
    It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
    You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
    Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

    Quote
    Originally posted by RLiu818
    Quote
    Originally posted by Deviation56
    Quote
    Originally posted by RLiu818
    You CAN install the nforce drivers BEFORE installing SP1.  The only requirement to install the nforce drivers is DX9.
    So is SP1 still recommended to install before the nforce drivers?
    The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.  
    oh.  IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed.  So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
    Simplicity-wise, i guess its pretty much equal.  It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
    but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
    i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

  • "error loading operating system MSI K8n Neo platinum

    OK,
    System will post, according to MSI Website I have the latest Bios version.
    I can boot from CD.
    The only odd item is that I am using the HD that I took out of my old computer with windows already on it.  
    Tried re-installing windows XP.  It went through the loading process and then rebooted.  Same error message appears.
    Also, is 48 degrees normal for idle temp on CPU AMD 64 3400? 36 degrees NB temp ok?
    Oh, yeah, I have a floppy installed, CD-ROM, CD RW, all non SATA. Using IDE cables.
    Video is Asus V9980 ultra GeForce FX 5950.
    MSI K8N Neo Platinum
    AMD 64 3400
    Hercules 600 W PSU
    WD 80gb HD
    Generic CD-Rom
    Sony Cd-RW
    2 x 512 crucial 400 ddram  slosts 1 and 2
    Asus V9980 ultra GeForce FX 5950 256 TVD
    Do I need to clear bios and re-start?
    HD is on it's own cable in IDE 1
    Cds on IDE 2 shared.
    let me know what you think.
    The other related posts I read, people were using raid or multiple OS.  I'm not.

    I had the same issues as you sometimes Windows would install and sometimes it wouldn't the problem was related to ram. I had my ram in slots one and two like you did and I moved the ram to slots 1 and 3 and now the machine is rock solid stable.
    I think most of the problems people are having are actually more ram related than anything else.
    So try moving the stick of ram you have in slot 2 to slot 3 and see if this solves your problem. This solution is on forums somewhere I am just not sure where.
    Take care,
    Bob

  • Msi k8n neo plat problems

    I have built 2 computers exactly the same.
    msi k8n neo plat
    512 corsair xms ddr 3200
    8og sata maxtor
    amd 64 3200
    128mb ati 9800 pro
    asus cd drive
    When i tried to install windows xp pro on both the machines i got the same error. could not copy file. On each try the file was a different one. After hours of trying new things i found that putting the memory in slot 2 on the motherboard  solved the problem, windows installed and booted up as norm. When i moved the memory back to slot 1 the computer would not boot.
    I have now left the memory in slot 2 but the computer will still crash every hour.
    I am sure this is something to do with the memory but not sure what the problem is.
    Can anyone help.

    Can anybody tell me what i should set the cpu fsb frequency to in the bios.
    I just read this in the faq
    What is the fsb speed of this cpu?
    Depending on which FSB you are asking about: The Athlon 64's have the memory controller built in (which was previously part of the Northbridge on the motherboard) which uses up to 200MHz DDR Memory (400MHz FSB) The HyperTransport link from the CPU to the rest of the motherboard runs up to 800MHz. Just to expand on my answer... The HT link is 800MHz, but it's 16 bit in size (2 bytes worth of data per clock) the total bandwidth of the HyperTransport link is 3.2GB in total - 1.6GB sending data to CPU and 1.6GB receiving data from CPU.

  • Help with MSI K8N Neo Platinum

    HELP please- motherboard MSI K8N Neo PLATINUM: I tried to take away the backplate for the heatsink (on the back side of MB) in order to install the zalman HS beafore i read the forum (use a fan...) and the worst of all happend:
    I scratched the back surface!! the scratches are minor, that is 4 scratches half a milimeter long each and not deep but i can see the copper of some lines leading from the memory slots to the processr. My question is : can I try and build the computer on that motherboard anyway or better buy a new one? is there a risk of dammaging other components? oh god what a mistake!

    Make sure the new backplate is non-conductive. The backplate for the Hyper 6 has a non-conductive sticker on it. Make sure to keep it on if youve got one... If the lines are exposed even with the back-plate on perhaps you should cover them with some non-conductive (100% non conductive!) tape or something.
    Then it doesnt matter if they are exposed, as long as they are ok.
    A good tip, which got when i was removing my backplate, is to use a blow dryer to heat it up and the remove it with your fingers. That way youll also notice if it gets to hot
    The glue gets sticky at blow drier temps. And pls, dont singe the MB with your blow dryer, you only have to make it hot, and if you cant touch it, how can you remove it with your fingers?
    I guess theres no way of telling if you have a serious prob and no way to tell if your cpu will be ok. I guess you could (?) try and start it wíthout anything (cpu, mems) but a PSU, and then, if it (and maybe the PSU) goes "!Pfsssssss!"  or "bang!", youll now you will have to replace it.
    I put a screwdriver through an asus board once, and it still worked...  

  • MSI K8N Neo Platinum Query

    ALoha folks, having osme problems with my board ( think i may have damaged it but wanna be sure).
    I got a VAPo XE and when i went to install it i realised that the back plate was in the way. Went ok, came on here, found the sugestions on removing it (hair dryer) and removed it succesfully by pulling it up with a pair of pliers.
    Installed Vapo etc, chucked in ram, cpu and gfx card.
    When i turn it on i get a beeep and inothin happens. No image to the monitor at all. I attached the d-bracket to check the led code and it seems to stop at inializing keyboard.
    What i've tried so far is a second gfx card and moving the memory to different dimms (aint tried me other stick of memory yet.).
    What exactly is "initlializing keyboard", is it what i think it is (ie keyboard :p )
    What else can i do before i just go and buy a new mobo?
    Thanks for any help.
    Full system specs:
    Vapo Xe
    Antec 480w Trupower (+5v (38A), +12v (22A), +3.3v (30A)
    MSI K8N Neo Plat
    AMd 64 3200 512k (newcastle)
    1gig of corsair XLS3200XLPT CAS2 (only used 1 512mb stick thus far)
    Geforce 256 (also tried a 9700pro and no change)

    Right i got this fixed.
    Ended up taking it all apart and resitting everything. Changed the ram as well and tis now working fine. Dunno if its the other ram that was dodgy or not, will check that outl later. For now immjust happy to be able to POST :D

Maybe you are looking for