MSI K8N Neo Pl. needs BIOS upgrade BAD!

Some bugs i have sinds I use this mobo:
*SB Audigy2 ZS: All installed but no go: xp manager says I need up to date firmware/bios but I used the latest bios (1.10) and drivers.
*Hercules Oc 3D tweaker: install gives continue auto reboot!!!
needs save mode to uninstall.
*PSU has only 2.25V on the 12V line???? alarm on MSI alert4 and MBM5, report on SiSoftware Sandra!!!
In bios itselve the 12V line seems normal (12.21V)
*As for 3D mark? 3DM01 as 3DM03 has less marks (400 points) than my XP2500+ @2.2Gig (XP3200+)!!!
*Sometimes a weard sound coming from mobo, like a car with bad breaks.
And this gets realy annoying!!!
*The onboard sound is just sad, cracking sound of realy bad quality.
Is the K8N NEO now bad?
Well........no, but MSI realy needs a bios update verry BAD!!!!!
Bios used on positive reviews: bios 1.13.
Latest on line bios: bios 1.10.........huhmmmm?
Are there onther people having the same or other problems with this board?
Plz, post them here.

Quote
I realy think about going back to Asus , DFI or Abit.
MSI seems low buget at a high price to me.
Maybe a new bios may help but i don't have a lot of hope in this brand no more.
Max OC i get is 2100MHz, lol OMG.
No use going up with Vcore, its nog go all the way.
This CPU go's @ 2400MHz with no prob on a ASUS K8V Deluxe at stock.
MEM is corsair 1024MB XMS PC3200LL.
Seems there is nothing working on this mobo at all like it has to.
Temps are wrong, OC sucks, not stabel at all, strange sounds coming out of mobo, bad sound from onboad sound, bad support, bad NB cooling, backplate glued on the mobo.......and so on......
I have never had any problems with any MSI boards in the past.. Since I am system builder (maksys.biz) I test tons of motherboards yearly.. I am very happy with MSI's performance compared to other boards (asus, gigabyte, epox, etc). A few times I needed to contact MSI to fix a few RMA problems and they were prompt to get back to me and take care of my problems. I am currently using a MSI K8N Plat board. No problems.. Excellent performance.. I am sorry you feel the way you do about MSI and wish the best for you.

Similar Messages

MSI K8N Neo V2.0 Bios update crashed

Hi there,
I just thought it would be an good idea to update the bios pf my MSI K8N Neo V2.0 retail mainboard via Live Updater 3. But near the end WinFlash told me there was an error and form then on I get a checksum error while booting. I cant find any bios data on the website.
Is there anything I can do to fix that? How can I create a floppy without Live Updater?
Hope you can help me.
Dennis

Quote from: vI3Tz on 10-February-09, 17:09:09
My mainboard is this one http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&prod_no=217
Its an Award BIOS. Which version I cant tell you but I did not update it before.
That's V2, not V2.0 ==> http://global.msi.com.tw/index.php?func=prodcpusupport&maincat_no=1&cat2_no=&cat3_no=&prod_no=210#menu
Paste full details about the mainboard, look here how to ID ==> https://forum-en.msi.com/index.php?topic=113146.0
Or paste mainboard SN.

MSI K8N Neo Pl. needs upgrade BAD!

Some bugs i have sinds I use this mobo:
*SB Audigy2: All installed but no go: xp manager says I need up to date firmware/bios but I used the latest bios (1.10) and drivers.
*Hercules Oc 3D tweaker: install gives continue auto reboot!!!
needs save mode to uninstall.
*PSU has only 2.25V on the 12V line???? alarm on MSI alert4 and MBM5, report on SiSoftware Sandra!!!
In bios itselve the 12V line seems normal (12.21V)
*As for 3D mark? 3DM01 as 3DM03 has less marks (400 points) than my XP2500+ @2.2Gig (XP3200+)!!!
*Sometimes a weard sound coming from mobo, like a car with bad breaks.
Is the K8N NEO now bad?
Well........no, but MSI realy needs a bios update verry BAD!!!!!
Bios used on positive reviews: bios 1.13.
Latest on line bios: bios 1.10.........huhmmmm?

Huh, i thought i posted this als the Nvidia section. ??? -)
Plz if some admine can remove this i'l be thankfull.

MSI K8N Neo Platinum 2 Bios Sign On.

So I just upgraded my desktop system to juicy quad core goodness, and was going to put my K8N Neo Platinum 2 into my server box.
When I put it in, and booted it up the fans would turn on, but there was a second where it tried to output to the display and my monitor would turn on. but then it turned off.
So after disecting it again, and plugging only the video card (Geforce 6200 AGP) and the d-bracket in I could see that the lights signaled that it was stuck at the Bios Sign On.
I have a 550W Antec PSU in the box, I'm positive that is plenty, since it was in my old set up and feeding the 6800GT just fine previously.
The only real differences between the set up I had before and what is in it now, is the Adaptec 29160 SCSI card, and I removed the Audigy Platinum and the 6800 GT Agp card that I had in it. I even tried putting that card back in, but no luck there either.
I've tried clearing the CMOS, I've tried even putting it into a new case with different PSU. Still the same, fans start spinning, but no display.
After reading here on some other Bios issues, it says to put in a PCI card (I'll try that Monday, as I took the board into work to try to get it booted there). I also need to test it out with one stick of ram (though I did take out two of them because I had planned on putting the other 2gb in a different PC, leaving 512mb Corsair sticks)
With installing the BIOS from Floppy, will this recover the current problem of not being able to get past the Bios Sign on?
Thanks for any help, it's greatly appreciated.
Slaapliedje

Read >>Posting Guide<<
Try with mainboard out of PC case {
Test the motherboard outside of the case to verify that the motherboard is not shorting to the case and causing a problem
• With only the CPU and heat sink, memory, and video card (or onboard video) connected to the motherboard, place the motherboard on a non-conductive surface and retest the motherboard
• Check the case mounting standoffs to verify that they are lining up correctly with the mounting holes on the motherboard.
}

MSI K8N Neo Plat Beta Bios 1.56

Please mail me if you can hoast it.
Extra features include additional settings for memory timings.
Not saying where it came from, but OCZ customer support is awsome!

Quote
Originally posted by pinochioWell actually i'm using 2 sticks of 512 MB.But you should try to loosen the timings.
There is no way to o/c high with those timings.
I can tell you a safe o/c would be 3.4.4.8 at 2.85 Volts and 230 Mhz for start.
My Value Ram does that hands down.
BTW it might also be the 1T command.Set it to 2T (although it might not be present)
I know Claw's have a problem with that.
The max i have taken my Value Ram is 242 at 2.85 3.4.4.8
Weird things happen after that....
hmm, well there are a few problems to start off with. first, my computer won't post with cas3. i've tried, and i dunno why, but it just doesn't post.
and i can oc just as far with 1t vs 2t, so i just leave it at 1t because of the major performance increase i get. right now i'm trying with less voltage.
i dunno why, but with the voltage set to auto, i appear to be prime stable at 206mhz.. 207 gives me an error after 15 min though. maybe i'll set the voltage to 2.7 or something and see how that works out.
i'll report back in a little while with some more concrete numbers.
edit: changed from 1&3 to 1&2, seems prime stable at 2.5-3-3-8, 1.75v, 215mhz
edit 2: up to 225mhz and still going strong. seems like most of my problems were because i had that one stick in the 3rd socket.

Bios from my Msi k8n Neo Platinum (socket 754)

Wich is the last beta bios from my Msi k8n Neo Platinum (socket 754) ?
And where download?
Thanks

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

Msi k8n neo platinum - The 1394 delete from bios device list

hi.
the line where 1394 was is now empty , i try everything i flash the bios and stuff
no luck for me???
it look like the 1394 onboard conroller is dead?

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

MSI K8N NEO PLATINUM (RAM/HD problem/mobo problem?) [SOLVED]

my setup:
windows xp pro sp2
amd athlon 64 3200+
msi k8n neo plat - 7030 - bios 2.1
x800 xt vid
sound blaster audigy 2
kingston valueram pc3200 2x512 cas 3-3-3-8
ps = antec 430 watt truepower power supply (20 A on 12V)
I dont know if you guys remember my but i created a topic on here a while back about how my keyboard and mouse suddenly stopped working, well that turned out to be that the msi k8n neo platinum just went bad. So i RMA'd it and recently got the replacement board (with latest bios already installed). It worked completely fine for about a day. Well that same day i got it back, i installed a Logitech G7 USB wireless mouse. after i installed it, i began getting numerous windows stop blue screen errrors, even after i removed the mouse from control panel. So i figured i should format because to rule out everything and start fresh. So i did a FULL format and attempted the reinstall windows again. AFTER the format and BEFORE windows attempted the continue installation, i got the same stop error. I figured now this was a hardware problem. So first i tested RAM. I got the latest version of memtest86 and let it run for 4 hours (11 passes) with NO errors at all. Secondly, i got a western digital hard drive diagnostic program to test for failing hard drive and again no problems with that. I still suspected ram so i tried to boot with only 1 stick installed (in first slot), however the PC didnt boot at all (cleared cmos too). So i moved it to the second slot and cleared cmos again and this time it posted but it just hangs at a cursor and does nothing, same thing happened with third slot. I tried this same procedure clearning cmos each time with the second ram stick and got the SAME results. Shouldnt the motherboard boot with only 1 ram stick installed? Did MSI RMA me another bad board? Any help would be appreciated. thanks.

Quote from: russellmrgn on 28-March-06, 10:54:39
Sap147
Can you give us what the D-Bracket was showing ie
R R
G R
As an example this means "Initializing Keyboard Controller"
You will find this information in the manual page 2-23. (On mine) under Hardware Setup
Also can you please do all your tests with the ps2 keyboard and mouse and for now leave your Logitech G7 USB wireless mouse to one side.
Russell
for two sticks of ram = RR
GG
for one stick of ram = GR
GG
as for the g7, it hasnt been plugged in at all, i took it out long ago.. as for the ram, the timing was set to 2T, no overclocking, i will try 2.7 v and let you know, but for the record, it has been running at normal voltage settings for about a year perfectly fine.

LiveUpdate broke the bios on a MSI k8n neo v2.0, need bios and recovery files.

LiveUpdate broke the bios on a MSI k8n neo v2.0, it need bios and recovery files. I do not know the serial number. The ERP is 070. Its a "k8n neo v2.0" "ms - 7030 ver: 20c" mainboard. I don't know the previous bios version. The computer prompts for a recovery disk during an AWARD BootBlock BIOS v1.0 initialization.
Thank You.

Here it is
[K8N Neo V2.0 series ==> 601-7030-070/080, BIOS 5.xx]
Sign On: K8N Neo V2.0 Series W7030NMS V5.4 031506 14:55:37

MSI K8N NEO-FSR BIOS Flash Corrupt

So there was an updated BIOS for my motherboard version 1.8 while I had 1.7. I went ahead and updated and it went fine. But then I noticed that my CPU speed was dramatically reduced and the multiplier was set to 5.0 giving me a 1ghz CPU. While I thought maybe the CMOS needed to be cleared I went ahead and did that but to no avail I wasnt able to fix that problem. I went over to the MSI Live Update to check for a new BIOS update and it had said that I had 1.8 version while the current version is 1.7. Just a few days before it said 1.8 was the latest. Hmmm. So I went off to the MSI website to find version 1.7 and downloaded it. To my surprise version 1.8 was available on the MSI website. I used the WinFlash program to flash my BIOS. Before doing so I closed all open applications including anti-virus, browsers, chatting programs, and so forth. But the flash was going VERY slow and it stopped with unable to verify bios. This made me scared pooless. After I restarted to no surprise my computer started up with BIOS Checksum error and asked for a floppy. I didn't have a floppy drive connected at the time but the computer shut itself off automatically. So I went and connected and floppy and looked up online at the MSI website about how to recover the BIOS. I found it and for my AWARD bios i followed the procedure. But each time it detects the floppy drive and then the computer shuts itself off. Even if i have no disc inside the floppy drive it'll shut off. Is it supposed to do this? I am unable to reflash my BIOS because of this behavior. I don't know what the cause of this problem is now. Did maybe the recovery portion of the BIOS get corrupted too? Please help. Let me know if you need any more information. Thanks in advanced. My specs are below btw:
MSI K8N NEO FSR
AWARD REV. 1.8
AMD ATHLON 3200+ 754
PDP 2x512MB RAM
NVIDIA GeForce 6800 Ultra
Ultra-X 500watt
WD 160GB IDE, Seagate 200GB IDE
Pioneer D-A07
Windows XP SP2, Gentoo Linux, Ubuntu Linux

Okay I tried taking unnecessary stuff out but it didn't help. I'm actually having the same problem this guy is having : https://forum-en.msi.com/index.php?topic=86508.0
Hmm looks like i might be in for a new motherboard or i can try the RMA process but I dont know how long that will take. Other than that...I dont know what to do. I could buy myself a new bios flash chip but they're damn expensive and I'd rather just buy a new motherboard. On another note I noticed that when I boot up the pc and i see that it detects the floppy I immediately pressed the reset button but it'll still shut down. So it's as if there is a timer somewhere. What the hell is up with this? It also seems MSI didn't release bad BIOS releases for my board only. Seems like people with other boards are having tons of problems with the latest BIOS releases.

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Any MSI K8N NEO Platinum Edition S754 nForce3 users?? Need advice..

Hi, thinking of building a budget system around a S739 Clawhammer 3700 with an
MSI K8N NEO Platinum Edition S754 nForce3 board. But have a few concerns..
- Will this board run on this chip or will it need updated BIOS to do so?
- Will it work with crucial 3200DDR memory.CL=3 • UNBUFFERED • NON-ECC • DDR400 • 2.6V • 64Meg x 64 ?
- Can it take an extra (3rd) 512 stick of this ram?
Thanks.

I have ran the Neo s754 model with 2 * crucial CT6464Z40B 512MB cas 3 modules and never had one single problem with the combination
of A64 GC version , mobo and RAM .
Three modules is tough on the single channel memory controller though , as it would have to deal with 6 banks
and you probably see the ram max speed as DDR333 and 2T commandrate is what it can cope with.

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

MSI K8n Neo Platinium ( 7030 NMS ) anb BIOS.

I have a MSI K8n Platinium ( 7030nms )
Recently, I update the bios to the last version, with this BIOS, at more of 220 Mhz to FSB ( A64 3000@2200 Mhz ) system don't start, before the update the system runs perfectly at 2350 Mhz ( 235 FSB ) and unestable at 2400 Mhz ( 240 FSB).
¿ What it's the problem with new bios ?
I tryed flash a old version, the 1.2 or 1.3, but isn't possible, the flash program tell me of a bios protection, and jumper balblabla....
Please help me !

There are plenty of beta verions I'm currently running 1.5B6 very stable.
you can see them on
Syar2003's Bios Link
Quote
What BIOS ver. it's recomended ?
Try this thread to see feedback K8N Neo and Neo2 Bios Collection. *Updated 140 official for Neo2
luck

Unable to install windows XP på MSI K8N NEO

Hi!
I have problems installing windows XP (SP1) with MSI K8N NEO Platinum Edition. After I bootet my computer (I build it myself) I noticed I had extrem cpu temperatures (65-70 degrees celcius). A quick search on the net indicated that a bios-upgrade might solve the problem, as my current bios probably showed too high temperatures.
As I had already installed windows XP i downloaded the bios and upgraded using the msi-windows-bios program. And, after the reboot my cpu temerature was 20 degrees lower (45 degrees celcius), which is more normal. But during the bootup of windows I got a blue-screen (or, actully a blue blink, just for a nano-second), and then my computer rebooted.
As the system were fairly new and didn't contain any importaint data, I decided to try to make a fresh install of winXP. But now I get a blue-screen during the installation, when the progress-bar says "installing devices", the blue screen appears when it is about 75%.
The installation of XP went fine before the bios upgrade, and I used XP for several hours without any problems at all - except the high cpu temperatur. Now my cpu temeperatur is acceptable, but XP wont install/boot.
I have tried to disable all the integraded devices (such as firewire, network, sound card etc) in the bios menu, but the XP install still provides a bluescreen during the installation of devices.
My system:
A64 3000+
1024Mb RAM (corsair value, I believe)
Samsung SATA 160Gb HD
Matrox Millenium G400 (I know it is old)
NEC 2510 DVD Burner
As I said, this is propably caused by the new bios, as it did work with the old one. I have also tried "Load failsafe defaults". Do you guys have any ideas of how to fix this? Should I (can I) downgrade my bios (I do not have a floppy drive in the computer).
.wirrum

Hi wirrum,
I see you are Swedish (the på was a give away).
I recently aquired a MSI K8N Neo2 from Komplett - where did you get yours from? maybe that have a bad batch because I am seeing the same problems as you.
I have two different problems , the same stability problems you are seeing and problems with the keyboard (ps2) not always starting up. I'm currently at Bios V1 and after seeing your problems I might just wait with V1.1 unless everything else fails.
Im considering an RMA to komplett soon and asking them for a motherboard that works (maybe from another manufacterer).
I have a decent PSU (Antec Truepower 480) and DDR400 from Kingston thats on their reccommended list, no overclocking, stable settings, I built the thing with ESD protection and carefully. Not overly impressed right now.
Some suggestions - turn off AGP Fastwrite, turn on SATA DMA access if you are using SATA. Turn off any Overclocking, move your memory around , try just one stick in DIMM 1 see if that helps.
I finally managed to get through an XP install but it took 6 hours to install. And it will occasionally stutter then shutdown entirely.
Quality..

MSI K8N Neo Pl. needs BIOS upgrade BAD!

Similar Messages

Maybe you are looking for