MSI K8N Neo Pl. needs upgrade BAD!

Some bugs i have sinds I use this mobo:
*SB Audigy2: All installed but no go: xp manager says I need up to date firmware/bios but I used the latest bios (1.10) and drivers.
*Hercules Oc 3D tweaker: install gives continue auto reboot!!!
needs save mode to uninstall.
*PSU has only 2.25V on the 12V line???? alarm on MSI alert4 and MBM5, report on SiSoftware Sandra!!!
In bios itselve the 12V line seems normal (12.21V)
*As for 3D mark? 3DM01 as 3DM03 has less marks (400 points) than my XP2500+ @2.2Gig (XP3200+)!!!
*Sometimes a weard sound coming from mobo, like a car with bad breaks.
Is the K8N NEO now bad?
Well........no, but MSI realy needs a bios update verry BAD!!!!!
Bios used on positive reviews: bios 1.13.
Latest on line bios: bios 1.10.........huhmmmm?

Huh, i thought i posted this als the Nvidia section. ??? -)
Plz if some admine can remove this i'l be thankfull.

Similar Messages

MSI K8N Neo Pl. needs BIOS upgrade BAD!

Some bugs i have sinds I use this mobo:
*SB Audigy2 ZS: All installed but no go: xp manager says I need up to date firmware/bios but I used the latest bios (1.10) and drivers.
*Hercules Oc 3D tweaker: install gives continue auto reboot!!!
needs save mode to uninstall.
*PSU has only 2.25V on the 12V line???? alarm on MSI alert4 and MBM5, report on SiSoftware Sandra!!!
In bios itselve the 12V line seems normal (12.21V)
*As for 3D mark? 3DM01 as 3DM03 has less marks (400 points) than my XP2500+ @2.2Gig (XP3200+)!!!
*Sometimes a weard sound coming from mobo, like a car with bad breaks.
And this gets realy annoying!!!
*The onboard sound is just sad, cracking sound of realy bad quality.
Is the K8N NEO now bad?
Well........no, but MSI realy needs a bios update verry BAD!!!!!
Bios used on positive reviews: bios 1.13.
Latest on line bios: bios 1.10.........huhmmmm?
Are there onther people having the same or other problems with this board?
Plz, post them here.

Quote
I realy think about going back to Asus , DFI or Abit.
MSI seems low buget at a high price to me.
Maybe a new bios may help but i don't have a lot of hope in this brand no more.
Max OC i get is 2100MHz, lol OMG.
No use going up with Vcore, its nog go all the way.
This CPU go's @ 2400MHz with no prob on a ASUS K8V Deluxe at stock.
MEM is corsair 1024MB XMS PC3200LL.
Seems there is nothing working on this mobo at all like it has to.
Temps are wrong, OC sucks, not stabel at all, strange sounds coming out of mobo, bad sound from onboad sound, bad support, bad NB cooling, backplate glued on the mobo.......and so on......
I have never had any problems with any MSI boards in the past.. Since I am system builder (maksys.biz) I test tons of motherboards yearly.. I am very happy with MSI's performance compared to other boards (asus, gigabyte, epox, etc). A few times I needed to contact MSI to fix a few RMA problems and they were prompt to get back to me and take care of my problems. I am currently using a MSI K8N Plat board. No problems.. Excellent performance.. I am sorry you feel the way you do about MSI and wish the best for you.

MSI K8N NEO PLATINUM (RAM/HD problem/mobo problem?) [SOLVED]

my setup:
windows xp pro sp2
amd athlon 64 3200+
msi k8n neo plat - 7030 - bios 2.1
x800 xt vid
sound blaster audigy 2
kingston valueram pc3200 2x512 cas 3-3-3-8
ps = antec 430 watt truepower power supply (20 A on 12V)
I dont know if you guys remember my but i created a topic on here a while back about how my keyboard and mouse suddenly stopped working, well that turned out to be that the msi k8n neo platinum just went bad. So i RMA'd it and recently got the replacement board (with latest bios already installed). It worked completely fine for about a day. Well that same day i got it back, i installed a Logitech G7 USB wireless mouse. after i installed it, i began getting numerous windows stop blue screen errrors, even after i removed the mouse from control panel. So i figured i should format because to rule out everything and start fresh. So i did a FULL format and attempted the reinstall windows again. AFTER the format and BEFORE windows attempted the continue installation, i got the same stop error. I figured now this was a hardware problem. So first i tested RAM. I got the latest version of memtest86 and let it run for 4 hours (11 passes) with NO errors at all. Secondly, i got a western digital hard drive diagnostic program to test for failing hard drive and again no problems with that. I still suspected ram so i tried to boot with only 1 stick installed (in first slot), however the PC didnt boot at all (cleared cmos too). So i moved it to the second slot and cleared cmos again and this time it posted but it just hangs at a cursor and does nothing, same thing happened with third slot. I tried this same procedure clearning cmos each time with the second ram stick and got the SAME results. Shouldnt the motherboard boot with only 1 ram stick installed? Did MSI RMA me another bad board? Any help would be appreciated. thanks.

Quote from: russellmrgn on 28-March-06, 10:54:39
Sap147
Can you give us what the D-Bracket was showing ie
R R
G R
As an example this means "Initializing Keyboard Controller"
You will find this information in the manual page 2-23. (On mine) under Hardware Setup
Also can you please do all your tests with the ps2 keyboard and mouse and for now leave your Logitech G7 USB wireless mouse to one side.
Russell
for two sticks of ram = RR
GG
for one stick of ram = GR
GG
as for the g7, it hasnt been plugged in at all, i took it out long ago.. as for the ram, the timing was set to 2T, no overclocking, i will try 2.7 v and let you know, but for the record, it has been running at normal voltage settings for about a year perfectly fine.

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

Any MSI K8N NEO Platinum Edition S754 nForce3 users?? Need advice..

Hi, thinking of building a budget system around a S739 Clawhammer 3700 with an
MSI K8N NEO Platinum Edition S754 nForce3 board. But have a few concerns..
- Will this board run on this chip or will it need updated BIOS to do so?
- Will it work with crucial 3200DDR memory.CL=3 • UNBUFFERED • NON-ECC • DDR400 • 2.6V • 64Meg x 64 ?
- Can it take an extra (3rd) 512 stick of this ram?
Thanks.

I have ran the Neo s754 model with 2 * crucial CT6464Z40B 512MB cas 3 modules and never had one single problem with the combination
of A64 GC version , mobo and RAM .
Three modules is tough on the single channel memory controller though , as it would have to deal with 6 banks
and you probably see the ram max speed as DDR333 and 2T commandrate is what it can cope with.

LiveUpdate broke the bios on a MSI k8n neo v2.0, need bios and recovery files.

LiveUpdate broke the bios on a MSI k8n neo v2.0, it need bios and recovery files. I do not know the serial number. The ERP is 070. Its a "k8n neo v2.0" "ms - 7030 ver: 20c" mainboard. I don't know the previous bios version. The computer prompts for a recovery disk during an AWARD BootBlock BIOS v1.0 initialization.
Thank You.

Here it is
[K8N Neo V2.0 series ==> 601-7030-070/080, BIOS 5.xx]
Sign On: K8N Neo V2.0 Series W7030NMS V5.4 031506 14:55:37

Unable to install windows XP på MSI K8N NEO

Hi!
I have problems installing windows XP (SP1) with MSI K8N NEO Platinum Edition. After I bootet my computer (I build it myself) I noticed I had extrem cpu temperatures (65-70 degrees celcius). A quick search on the net indicated that a bios-upgrade might solve the problem, as my current bios probably showed too high temperatures.
As I had already installed windows XP i downloaded the bios and upgraded using the msi-windows-bios program. And, after the reboot my cpu temerature was 20 degrees lower (45 degrees celcius), which is more normal. But during the bootup of windows I got a blue-screen (or, actully a blue blink, just for a nano-second), and then my computer rebooted.
As the system were fairly new and didn't contain any importaint data, I decided to try to make a fresh install of winXP. But now I get a blue-screen during the installation, when the progress-bar says "installing devices", the blue screen appears when it is about 75%.
The installation of XP went fine before the bios upgrade, and I used XP for several hours without any problems at all - except the high cpu temperatur. Now my cpu temeperatur is acceptable, but XP wont install/boot.
I have tried to disable all the integraded devices (such as firewire, network, sound card etc) in the bios menu, but the XP install still provides a bluescreen during the installation of devices.
My system:
A64 3000+
1024Mb RAM (corsair value, I believe)
Samsung SATA 160Gb HD
Matrox Millenium G400 (I know it is old)
NEC 2510 DVD Burner
As I said, this is propably caused by the new bios, as it did work with the old one. I have also tried "Load failsafe defaults". Do you guys have any ideas of how to fix this? Should I (can I) downgrade my bios (I do not have a floppy drive in the computer).
.wirrum

Hi wirrum,
I see you are Swedish (the på was a give away).
I recently aquired a MSI K8N Neo2 from Komplett - where did you get yours from? maybe that have a bad batch because I am seeing the same problems as you.
I have two different problems , the same stability problems you are seeing and problems with the keyboard (ps2) not always starting up. I'm currently at Bios V1 and after seeing your problems I might just wait with V1.1 unless everything else fails.
Im considering an RMA to komplett soon and asking them for a motherboard that works (maybe from another manufacterer).
I have a decent PSU (Antec Truepower 480) and DDR400 from Kingston thats on their reccommended list, no overclocking, stable settings, I built the thing with ESD protection and carefully. Not overly impressed right now.
Some suggestions - turn off AGP Fastwrite, turn on SATA DMA access if you are using SATA. Turn off any Overclocking, move your memory around , try just one stick in DIMM 1 see if that helps.
I finally managed to get through an XP install but it took 6 hours to install. And it will occasionally stutter then shutdown entirely.
Quality..

Problems with 64 3200+ on MSI k8n neo platinum.

AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
Okey here it comes..
I installed everything and all seemed to work okey, until i threw in the XP install cd and began my install..
in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and the install moves on, this accurs 4-5 times and then it gives me a BIG "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
changed hdd, change gfx-card. change psu, removed all no-need pci-cards..
but still same error, i aint no expert so i might have missed something in bios or something :(
please help me if you can..

Flashing bios with memory errors is a veeeeery bad idea .
Almost guarantied to ruin your bios chip with bad data block.
That this even is suggested with mem errors , well .
You need to resolve the mem errors before doing anything else.
The windows xp install routine is a very heavy user of cpu and memory
and will fail if you have mem errors like you have.
Some things to try is entering bios and change auto settings on cpu voltage
giving it 0.5v more than default .
Set the memorys voltage to vendors max approved voltage
which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
Disconnect all devices not needed for a windows install ,things can be added later.
Have only the hd that os is to be installed to , one cdrom , floppy , memory and
gfx card .
Disconnect USB case front connector (cause corruption and strange faults if
USBOC pin is connected)

MSI K8N NEO platinum and MOBILE chips

I just found out a problem with MSI K8N NEO Platinum.
I recently upgraded my cpu from Clawhammer DTR 3200+ 1.5V to Clawhammer Mobile 3400+ 1.4V (hoping for better overclocking). To my surprise the mainboard can no longer raise the VCore voltage over 1.45V (it doesn’t matter if I select in the bios 1.5 or 1.55V). The only working option is raising de VCore by 3.3% 5% 8.3% 10%, resulting in a maximum VCore of 1.45 + 1.45 x 10% = 1.6V
I did some googeling and found there is a VCore issue with the K8N NEO and mobile chips, although DTR chips are fully supported (working VCore and multiplier adjustments).
I am using the latest beta bios 1.56B (moded by Pinochio)
Did any of you found a way to resolve this problem? IT IS DRIVING ME INSANE!!!

Bad post...

MSI K8N Neo 3 Sound Not Working

Hello All
I recently got MSI K8N Neo 3 but the problem is that I don't able to detect the sound card in Windows XP.
The sound card don't detect in Windows XP Service Pack 2 Till November 9 Updates.
My System Specs are
MSI K8N Neo 3
AMD Sempron 2500+ 64-bit
Kingston Value RAM 512MB
Nvidia Vanta 16MB
HardDisk Sata 250GB Western Digital
Power Supply 20 Pins (Not 24 Pins) 300 Watts (Atleast Written)
I don't know the where the problem is . The Audio is enabled in board. I have updated one motherboard bios before checking but the sound was not working so I got new one in replace. I don't upgrade the bios and install Windows XP Today but no sound.
Looking Forward to solve this problem.
Regards
Faisal

Yes, the PCI Sound card is not there. If the sound card is not detected, How I can move the sliders. The Sound icon is only show when the drivers are there and my sound card is not detected. Maybe some hardware conflict or some voltages problem. That I want to confirm. Which thing is creating problem?
Thanks for your Reply...
Further Suggestions Needed

Help MSI K8n Neo 2 Platinum

Good Day I bought a MSI K8N NEO Platinum recently and have these doubt ! I[m not upgrade the Bios because the system functions perfectly but verified that version 1.2 says Support FSB you 450MHz. What this wants to say? I gain more performance? Another versions described terms : - Update NVPXE version you the 2.03.0469. - Update CBROM version you the 1.47. - Update NVRAID version you the 4.81.
What it would be these terms?
Thanks a lot. Sorry my English

If your board is stable and you like it the way it is, there is no reason to update the bios. You should only update the bios if it pertains to you.
Support 450MHz FSB is probably refering to speeds you can attain with overclocking.
NVPXE is for booting off of the LAN. I doubt you need to worry about this.
CBROM don't know
NVRAID is to update the bios for the RAID, but again if you are having no problems with it there is no need to upgrade.
Good Luck
Jeremy

System setup advice for MSI K8N Neo 2 Platinum.

Here is the PC I'm putting together:
Enermax EG465P-VE Noisetaker PSU with 29A on combined 12v rail
5v=30A 3.3v=30A 12V1=18A and 12V2=18A (comb 12v=29A)
MSI K8N Neo 2 Plat
AMD 3000+ winchester Retail box (carefully replacing AMD shin etsu with Artic Silver 5)
WD 80GB 800JB 7200 rpm EIDE HD
OCZ 2 x 256 PC3200 Premier Dual Chan Memory (2.5-3-3-7) (List on MSI website as ok)
Matrox G400 max
adaptec 2930u scsi adapter
Pioneer 303S 6x scsi DVD rom
Umax 1200S scsi scanner
Plextor 24/10/40 EIDE CDRW
External USR robotics serial modem
Microsoft regular keyboard PS2
Logitech regular wheel mouse PS2
regular old 1.44 MB floppy drive
Installing Win XP Pro upgrade (have my 98SE CD)
In the future I will possibly ditch my scsi DVD rom and replace with NEC dual layer burner and replace Plextor CDRW with 52/32/52 CDRW/DVD ROM. For now I'm going with what I have.
No plans to overclock now if ever. Perhaps a small amount later. Maybe 2.0 ghz? Maybe no overclocking at all.
Not a gaming rig really, although I'll try the odd game at low resolution.
So is there anything I should do ahead of time? I am carefully installing the board in the case and everything that goes with it. What sort of configuration setups should I do? Do I flash to a more updated BIOS first? Do I leave onboard things un-activated first? How do I setup my memory? For instance, I may look for the best BIOS to start with and have it ready to use if I have problems. I may also use the nVidia drivers for onboard audio instead of the realtek drivers.
Not looking for all the answers, just feel free to point out any of the obvious which may save me time
thanx in advance for any help

There is a compatibility issue betwen the Matrox G series cards and the MSI Neo Platinum motherboards, which AFAIK, hasn't been solved yet. The problem seems to be a result of changes made in the newer versions of the MSI bios, however you may be stuck if you need a newer bios for the Winchester cpu. You can find out more if you do a search on Matrox in this forum.
Robert

MSI k8n neo platinum hangs after post single beep

Today I powered off my computer, and when I tried to power it back up the x850 fan just runs at full speed, and never drops to idle and the screen stays dark. If I reset the bios then it will post as far as asking to press Del to enter setup, but freezes at that point. This thing has been running like a champ and this is the first problem I've ever had! I unhooked/unplugged everything but the keyboard/video/ram/cpu. Tried running with four different memory modules in single channel and dual channel but no luck there either. None of the hardware below has been changed in the last six months. Any ideas? TIA!
The indicator lights read:
R G
R G
According to the manual this means:
Testing Base and Extended Memory
Testing base memory from 240K to 640K and extended
memory above 1MB using various patterns.
AMD 64 4000+
MSI K8N Neo Plat Rev1
PQI BH5 512x2
ATI x850 AGP
SATA 10k RPM Primary
Antec P/S

Quote from: flobelix on 07-February-07, 07:09:19
Core2Duo E6400 would be a gain of about 15% compared to 4000+ ( in games 1024x768, no aniso or aa). Quality options and better resolution would shorten the gain. Other applications than games e.g. cinebench would run a lot faster on the C2D. The main advantage compared to the 4000+ would be dual core because many future games will be optimized for this. Question is: Is this worth $272?
With only one 7600GT installed you won't be able to play most of the new games in full detail because of lacking 3d power although Core2Duo installed. The gain of cpu performance will be therefor useless (if main focus is on gaming). 7600GT sli-array would be an option for full detail and using more cpu power but it would also be slower than one 7950GT for nearly the same amount of money spent for 2 7600GT.
1. If you need a gaming pc I'd only buy a new C2D if you can also afford high end vga. Otherwise cpu power is wasted.
2. 7600GT is only an option if you want to save money now and you want a second one later. Buying two now to get a sli-array isn't very clever. Less performance than 7950GT, same price.
3. Buying one gig of ddr2 isn't very clever either. More and more applications need more than 1 gig (for example vista!). When changing to ddr2, change to 2 gig dual channel kit.
4. Getting $300 for your old stuff seems quite optimistic to me.
Conclusion: Save your money for better vga! Take back 7600gt, keep old vga and 4000+, wait for a little time and buy Geforce 8800 GTS. Increase of gaming performance would be unbelieveable. After providing high end vga you can upgrade to C2D in next step and receive a noticeable increase of performance in all kinds of applications.
Hmm.. very good points. I went and read some reviews of the upcoming 8600 and 8800. They are quite impressive for the money. I believe I'll return everything and find a limp-a-long $50 mobo to replace the dead msi. It looks like holding out for quad core with dual SLI is the real gain over my current setup. On a side note I won't be running vista until after sp1 or possible sp2. No tangible benefit to me! What suggestions do you have for a solid performing mobo for the following:
socket 939
4 240pin DDR slots
AGP (My X850 XT is still strong enough for everything I do)
SATA 1.5 (no need for the faster one as I have none of those drives)

MSI K8N NEO-FSR BIOS Flash Corrupt

So there was an updated BIOS for my motherboard version 1.8 while I had 1.7. I went ahead and updated and it went fine. But then I noticed that my CPU speed was dramatically reduced and the multiplier was set to 5.0 giving me a 1ghz CPU. While I thought maybe the CMOS needed to be cleared I went ahead and did that but to no avail I wasnt able to fix that problem. I went over to the MSI Live Update to check for a new BIOS update and it had said that I had 1.8 version while the current version is 1.7. Just a few days before it said 1.8 was the latest. Hmmm. So I went off to the MSI website to find version 1.7 and downloaded it. To my surprise version 1.8 was available on the MSI website. I used the WinFlash program to flash my BIOS. Before doing so I closed all open applications including anti-virus, browsers, chatting programs, and so forth. But the flash was going VERY slow and it stopped with unable to verify bios. This made me scared pooless. After I restarted to no surprise my computer started up with BIOS Checksum error and asked for a floppy. I didn't have a floppy drive connected at the time but the computer shut itself off automatically. So I went and connected and floppy and looked up online at the MSI website about how to recover the BIOS. I found it and for my AWARD bios i followed the procedure. But each time it detects the floppy drive and then the computer shuts itself off. Even if i have no disc inside the floppy drive it'll shut off. Is it supposed to do this? I am unable to reflash my BIOS because of this behavior. I don't know what the cause of this problem is now. Did maybe the recovery portion of the BIOS get corrupted too? Please help. Let me know if you need any more information. Thanks in advanced. My specs are below btw:
MSI K8N NEO FSR
AWARD REV. 1.8
AMD ATHLON 3200+ 754
PDP 2x512MB RAM
NVIDIA GeForce 6800 Ultra
Ultra-X 500watt
WD 160GB IDE, Seagate 200GB IDE
Pioneer D-A07
Windows XP SP2, Gentoo Linux, Ubuntu Linux

Okay I tried taking unnecessary stuff out but it didn't help. I'm actually having the same problem this guy is having : https://forum-en.msi.com/index.php?topic=86508.0
Hmm looks like i might be in for a new motherboard or i can try the RMA process but I dont know how long that will take. Other than that...I dont know what to do. I could buy myself a new bios flash chip but they're damn expensive and I'd rather just buy a new motherboard. On another note I noticed that when I boot up the pc and i see that it detects the floppy I immediately pressed the reset button but it'll still shut down. So it's as if there is a timer somewhere. What the hell is up with this? It also seems MSI didn't release bad BIOS releases for my board only. Seems like people with other boards are having tons of problems with the latest BIOS releases.

MSI K8N Neo Plat edit. and IDE

Can anybody tell me how many IDE units you can run on this motherboard? I do not want to use raid 0 or 1. I have a KT3 ultra - aru at them moment with 6 single IDE units, but now I need to upgrade.
Thanks for any help.

Hi,
you can connect 4 IDE devices and 4 four sata devices on MSI K8N Neo Plat editition.
If it's not enought you can plug an IDE PCI card....

MSI K8N Neo Pl. needs upgrade BAD!

Similar Messages

Maybe you are looking for