MSI K8N Neo Platinum ,bios issue or HW

Hi i am using a system like in the signature described (usind adata instead of twinmos) im cooling with a prometeia system , and the board ist watercooled.
 My CPU is a Newcastle (@2800mhz ) my graphic card is the normal 9700pro (it makes no diff in oc if the card is clocked or not)
Now i got some serious problems , i can´t run high fsb sync ? Why ? i wasn´t able to do this with the twinmos ram , but i read twinmos has some serious problems with the nforce3, so i purchased 2*512 mb adata.
I tried different dimm combinations (1/2 ; 1/3) that didn´t made any difference
I tried different bios (1.2 1.25 1.31 1.1) but this didnt made any difference either (using 131 now)
my pci/agp is fix (always 66,67/33,34 in clockgen so its just perfect)
i don´t use any SATA devices (all disabled in bios)
What is my Problem ? is it only a bios problem , or is there hardware in my sys which makes probs? Could it be an IRQ Problem (got 2 pci cards in slot 3 and4 its an IDE raid controller and a soundcard)
i hope there is any help for me :(

Well this is the second time someone mentions problem with Adata DIMMs:
https://forum-en.msi.com/index.php?threadid=55475&sid=
Maybe it's about time to post it here:
https://forum-en.msi.com/index.php?threadid=51997&sid=
For all I can think of right now, either run the board with a single module or both with 5:6 divider  

Similar Messages

  • MSI K8N NEO PLATINUM BlueScreen Issue! Help!

    I'm having an issue with my MSI K8N NEO i get the blue screens occasionally.. A friend of mine says its a IDE driver issue.. LMK Here are the system specifications.
    MSI K8N NEO PLATINUM
    ATHLON64 3000+ @2.01 (stock)
    SAMSUNG 512MB PC3200 CAS 2.5
    PNY MX440 64MB DDR AGP8X
    MAXTOR DIAMONDPLUS MAX 8 40GB, 7200RPM SLIM
    300W GENERIC PS
    LMK whats wrong if you have ideas, i dont know if you have sufficient information to come up with a conclusion.. im not too sure whats going on either.. But A friend of mine is getting exact same issues he says its IDE conflicts.. now when the Blue screen comes up it doesnt stay long enough to give a moment to read it.. lmk if you have ideas thx..

    which drivers are you using?
    Right click MY computer -> properties -> Advance -> start up and recovery -> system failure -> uncheck "automatically restart"
    this way it will stop at the blue screen and get an stop error number
    Or view the error log
    Help and support -> Pick a Task ->Use Tools to view your computer information and diagnose problems  ->under Tools ->  my computer Information-> View Advanced System Information  -> View error log
    it shows all errors by date migh provide you error numbers ie. 0x000008e

  • New Bios For MSI K8N Neo Platinum [ 1.55]

    NEW BIOS FOR MSI K8N Neo Platinum !!!!
    BIOS 1.55 FOR K8N
    AND CLICK
    Apothikeusi/Emfanisi (Greek Language )
    Your CPU temperature is in the safe range. Please rest assured. If you are
    willing to, would you please flash BIOS to the version 1.55 verifying? We
    send it by attachment. As to how to flash BIOS, please refer to the word file
    in the attached file. Please kindly inform us of the results. Thanks for your
    cooperation.
    In addition, please enter BIOS to load optimized defaults after flashing BIOS.
    Please feel free to let us know if you still have any further issues or inquiries.
    Best regards,
    MSI Technical Support

    OMG !!!!
    Something is really weird about this bios !!!!
    I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
    Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
    OMG OMG....
    If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
    Really strange guys.I thought 230 was my memory limit....
    Gonna try higher and let you know.
    P.S. this bios seems to like Kinston Ram....Value at least  

  • Kingmax Hardcore DDR500 with MSI MS K8N Neo Platinum (Bios Version 1.40)

    I am interested in Kingmax Hardcore DDR500 (PC4000) 512MB DDR-SDRAM. Currently, I’m using MSI MS K8N Neo Platinum (Bios Version 1.40) with AMD 64bit 2800+ & MSI MS 8907 FX5200-TD128 AGP Card.
    Please advice whether the Kingmax Hardcore DDR500 (PC4000) 512MB DDR-SDRAM compatible with my systems.

    The "safe mode" that the BIOS message refers to is not related to Windows' Safe Mode. The BIOS safe mode lets you un-do any overclocking or memory settings that might make your computer so unstable that you can't even get into the BIOS settings to change them. In that case, you hold insert while powering on to reset the BIOS to default safe values.
    As for your problem getting into Windows' Safe Mode. If you upgraded from another motherboard that uses a different chipset, or if you somehow got the wrong chipset drivers installed, then the old AGP GART or chipset drivers will cause the system to halt/reboot very early in the Windows boot process even in safe mode. I've run into this problem before and its tricky. Best thing to do is switch back to the old motherboard, then go into safe mode and remove all chipset-related drivers, and then switch back to the new motherboard. If you can't do that, try running system repair from the windows setup CD. And failing that, you'd probably have to fully re-install the OS.

  • Bios from my Msi k8n Neo Platinum (socket 754)

    Wich is the last beta bios  from my Msi k8n Neo Platinum (socket 754) ?
    And where download?
    Thanks

    A thread here , from when 1.56 appeared:
    MSI K8N Neo Plat Beta Bios 1.56
    and when 1.55 appeared:
    New Bios For MSI K8N Neo Platinum [ 1.55]
    Seems to me that the 1.5x series were focused on chipset timings and ram .
    Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
    Beta bioses don't come with a changelog , they leak out . So any complete
    list of changes is not possible to provide.

  • Msi k8n neo platinum - The 1394 delete from bios device list

      hi.
    the line where 1394 was is now empty , i try everything i flash the bios and stuff
    no luck for me???
    it look like the 1394 onboard conroller is dead?

    A thread here , from when 1.56 appeared:
    MSI K8N Neo Plat Beta Bios 1.56
    and when 1.55 appeared:
    New Bios For MSI K8N Neo Platinum [ 1.55]
    Seems to me that the 1.5x series were focused on chipset timings and ram .
    Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
    Beta bioses don't come with a changelog , they leak out . So any complete
    list of changes is not possible to provide.

  • *UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

    Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
    Last Updated: Thursday July 15th, 2004
    Bioses:
    (In order of date released.)
    1.1b3 - (Download)
    - Pre-1.1, given to reviewers to use in their reviews and benchmarks.
    - Less stable, but supposedly you get slightly better overclocks.
    1.1 Official - (Download)
    1. This is AWARD BIOS release
    2. This BIOS fixes the following problems of the previous version:
    - Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
    - Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
    1.2b5 - (Download)
    1.2b7 - (No Download Yet)
    1.2b10 - (Download)
    - First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
    1.2b12 - (Download)
    - Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
    1.3b1 - (Download)
    - Another attempt to fix temperature problems?
    - Possibly fixes cold boot/power light issues?
    1.2 Official - (Download)
    1. This is AWARD BIOS release
    2. This BIOS fixes the following problems of the previous version:
    - System can't resume from S3 sometimes when install USB device.
    - Support K8 Sempron CPU.
    - Turn off keyboard LED in S3.
    --Quick Guide for flashing BIOS, provided by MSI--
    1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
    2. Press "Delete" and go to BIOS setup while computer bootup.
    Check BIOS advanced features and see if BIOS flash write control is enabled
    (This option must be enabled. If you can not find this setting, it means the BIOS can be
    flashed.)
    3. Boot from MS-DOS boot diskette and get a:\> prompt.
    4. Type "", then press ENTER
    5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
    6. After flashing complete, remove floppy and reset the system .
    7. Press DELETE or F1 when prompted at first reboot after flashing.
    8. Load BIOS optimized defaults, then save settings and exits.
    Drivers & Needed Files:
    (Note: All these drivers are for Windows XP.)
    Leaked Nvidia nForce3 Chipset Drivers Version 4.40
    (Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
    *NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
    More leaked drivers? Seems some parts of the drivers are older and some are newer.
    1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
    2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
    3. Nvidia nForce3 Chipset Drivers Version 4.24
    4. AMD Athlon 64 Processor Driver Version 1.1.0.14
    5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
    (The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
    5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
    (The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
    6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
    It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
    You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
    Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

    Quote
    Originally posted by RLiu818
    Quote
    Originally posted by Deviation56
    Quote
    Originally posted by RLiu818
    You CAN install the nforce drivers BEFORE installing SP1.  The only requirement to install the nforce drivers is DX9.
    So is SP1 still recommended to install before the nforce drivers?
    The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.  
    oh.  IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed.  So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
    Simplicity-wise, i guess its pretty much equal.  It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
    but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
    i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

  • "error loading operating system MSI K8n Neo platinum

    OK,
    System will post, according to MSI Website I have the latest Bios version.
    I can boot from CD.
    The only odd item is that I am using the HD that I took out of my old computer with windows already on it.  
    Tried re-installing windows XP.  It went through the loading process and then rebooted.  Same error message appears.
    Also, is 48 degrees normal for idle temp on CPU AMD 64 3400? 36 degrees NB temp ok?
    Oh, yeah, I have a floppy installed, CD-ROM, CD RW, all non SATA. Using IDE cables.
    Video is Asus V9980 ultra GeForce FX 5950.
    MSI K8N Neo Platinum
    AMD 64 3400
    Hercules 600 W PSU
    WD 80gb HD
    Generic CD-Rom
    Sony Cd-RW
    2 x 512 crucial 400 ddram  slosts 1 and 2
    Asus V9980 ultra GeForce FX 5950 256 TVD
    Do I need to clear bios and re-start?
    HD is on it's own cable in IDE 1
    Cds on IDE 2 shared.
    let me know what you think.
    The other related posts I read, people were using raid or multiple OS.  I'm not.

    I had the same issues as you sometimes Windows would install and sometimes it wouldn't the problem was related to ram. I had my ram in slots one and two like you did and I moved the ram to slots 1 and 3 and now the machine is rock solid stable.
    I think most of the problems people are having are actually more ram related than anything else.
    So try moving the stick of ram you have in slot 2 to slot 3 and see if this solves your problem. This solution is on forums somewhere I am just not sure where.
    Take care,
    Bob

  • MSI K8N Neo Platinum & Crucial Ballistix 512MB RAM Problem

    I have had MSI K8N Neo Platinum and 1x Crucial Ballistix 512MB RAM for 11 months.
    I have had 1x Crucial Ballistix 512MB RAM for 2.5 months, for a total of two.
    I have had MSI GeForce 6600GT (NX6600GT-VTD) 128MB AGP for 1 month.
    For about 1.5 to 2 weeks, I have been seeing random crashes while playing PC games.
    I started a thread on the Hard OCP forums a few days ago.  I did not know MSI had forums =)
    Rather than re-typing, I may as well just post the link:
    http://www.hardforum.com/showthread.php?t=934956
    My issue is also similar to this one:
    https://forum-en.msi.com/index.php?topic=83799.0
    Thanks for the help.

    ALL RIGHT, after almost    FOUR    months my issue is FINALLY    resolved.
    It is amazing how much time passes when you are hesitant to buy parts unless you are 95% sure it will fix the problem.
    OK, here is an update as to what I remember.
    I went to BIOS 1.4 and tried many different physical and BIOS RAM configurations (Different seating, different number of DIMMs, different RAM timings, voltages, etc).
    I concluded that I could not make my PC 100% stable, but I could get it darn close.  With certain settings, such as DDR400, 2-2-2-6, 1T, 2.80V, Aggressive Timing enabled, Memtest failed test #5 every time (this is spec for my RAM).  With other settings, such as DDR333, 2.5-3-3-7, 2T, Auto V, Aggressive Timing enabled, Memtest failed test #5 maybe once out of 5000.
    I also concluded that the RAM voltage and Aggressive Timing setting was having a big impact.  Some settings would not work (failed Memtest) with RAM at 2.80V but would work with RAM at Auto V.  Some settings would not work (failed Memtest) with Aggressive Timing enabled but would work with it disabled.
    Finally, I started to occasionally get R,G,R,G (Processor Initialization) on the D-Bracket upon cold-start & warm-start, which suggests a PSU issue:
    https://forum-en.msi.com/index.php?topic=76972.msg542545#msg542545
    That pushed me over the top, and I decided to buy a new PSU (TG-480-U22) and a new SATA HDD (WD2500KS) just because.
    Problem solved.  Thanks for all the help.
    I will continue to buy MSI in the future just because of these forums…and a good product of course!

  • Msi k8n neo platinum ps2 keyboard problem

    Hi. I'm having issues with my msi k8n neo platinum motherboard. I've read about 50 posts on these forums regarding the supposed ps2 keyboard issues with recent msi boards. However none of them seems to address my current situation.
    Like many  others, when I power up my system the cpu fan spins for like 3 seconds then everything comes to a halt.
    I tried many things to get my system to boot and the only thing that works is plugging my ps2 keyboard into the ps2 mouse port and moving the ps2 mouse into a usb port with an adapter.
    It seems there's no hope for fixing the problem other than RMA'ing, but I thought I would add to the pile of complaints stacking up against the MSI boards.

    if u had read the threads a little more u might have found a solution that seems to have worked 4 many - a usb keyboard usb Keyboard if u go this route dont forget to enable usb kb in bios
    Edit: This Thread Summarises the situation PS2 keyboard/mouse causes random shutdowns or doesnt work      

  • MSI K8N NEO platinum and MOBILE chips

    I just found out a problem with MSI K8N NEO Platinum.
    I recently upgraded my cpu from Clawhammer DTR 3200+ 1.5V to Clawhammer Mobile 3400+ 1.4V (hoping for better overclocking). To my surprise the mainboard can no longer raise the VCore voltage over 1.45V (it doesn’t matter if I select in the bios 1.5 or 1.55V). The only working option is raising de VCore by 3.3% 5% 8.3% 10%, resulting in a maximum VCore of 1.45 + 1.45 x 10% = 1.6V
    I did some googeling and found there is a VCore issue with the K8N NEO and mobile chips, although DTR chips are fully supported (working VCore and multiplier adjustments).
    I am using the latest beta bios 1.56B (moded by Pinochio)
    Did any of you found a way to resolve this problem? IT IS DRIVING ME INSANE!!!

    Bad post...

  • MSI K8n Neo Platinum

    Hi Guys,
                 I am having a problem with my computer at the moment. I am having trouble getting into the BIOS of this motherboard (MSI K8N Neo Platinum). When I try to get into BIOS, it goes into a black screen with a little line on top of it and its blinking. This has never happened before. Then when I shut off my computer since I couldn't get into the bios, I turned it back on and it goes on but nothing goes to screen or it wont boot up to startup screen. Then I turn it off, I reset the BIOS and turn it back on. Now it boots up to the startup screen, but when it says press del to get into bios, I pressed that and it happens again, it will not get into bios. When I do this over again by resetting the bios, this time without getting into BIOS, it goes on and boots up to Windows XP. I want to reformat my hard drive with a fresh copy of XP Pro, but I can't get into BIOS to do that. Can someone help me?

    Same thing happened to me today. Thanks MSI for publishing a Betaversion of a BIOSupgrade on the Live update.. 
    At first I figured that there must have been some fault during the BIOSflash so I downloaded the file again and repeated procedure. This time it worked like a charm and I could do all my BIOS-settings. The next restart the problem was back again though, and this time I had swapped the order for my SATA-drives to boot (to the way they should) but the system couldn't boot. So I couldn't enter neither the bios or Windows. Luckily you can shift the primary boot device by pressing F11 though, so I got out of the libido...
    Now I've downloaded the old 1.9 Version instead and I sure as h*** won't do any more beta-testing for MSI by using the Live Update anymore!

  • MSI K8N NEO Platinum Edition memory question

    Hi there,
    I've currently got a MSI K8N NEO Platinum Edition (Nforce 3) motherboard and 2X 512 MB Corsair Value Select memory modules (both double sided) running at DDR 400 - this runs completely stable and has done for a number of months. I would like to increase my memory to 1.5 Gig but there seems to be a lot of issues?
    I originally planned to buy an additional 512 Meg Corsair value select chip and place it in Bank 3 - is this acceptable?
    I assue that i would have to drop the speed down to DDR 333 from 400, could anyone tell me how much of a difference this actually makes (when playing FPS games Doom3 etc..) ?
    Any help would be greatly appreciated as i've been looking through both this forum and the Corsair one and i cant seem to find the answer.
    thanks in advance !

    Just note that there are combinations of two sticks that will also make the board run in DDR333 mode (see page 2-8 of the manual). For example, using two double-sided sticks in DIMM2 and DIMM3. I've actually managed to get it to work at DDR400 in those two slots, but it's not perfectly stable and overclocking diminishes drastically. Bottom line is the system will work fine when forced to DDR333...as long as you don't expect to overclock the RAM to any significant degree.

  • Problems with 64 3200+ on MSI k8n neo platinum.

    AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
    MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
    Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
    Okey here it comes..
    I installed everything and all seemed to work okey,  until i threw in the XP install cd and began my install..
    in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and  the install moves on,  this accurs 4-5 times and then it gives me a BIG  "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
    I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
    changed hdd, change gfx-card. change psu,  removed all no-need pci-cards..
    but still same error, i aint no expert so i might have missed something in bios or something :(
    please help me if you can..

    Flashing bios with memory errors is a veeeeery bad idea .
    Almost guarantied to ruin your bios chip with bad data block.
    That this even is suggested with mem errors , well .
    You need to resolve the mem errors before doing anything else.
    The windows xp install routine is a very heavy user of cpu and memory
    and will fail if you have mem errors like you have.
    Some things to try is entering bios and change auto settings on cpu voltage
    giving it 0.5v more than default .
    Set the memorys voltage to vendors max approved voltage
    which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
    Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
    Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
    Disconnect all devices not needed for a windows install ,things can be added later.
    Have only the hd that os is to be installed to , one cdrom , floppy , memory and
    gfx card .
    Disconnect USB case front connector (cause corruption and strange faults if
    USBOC pin is connected)

  • MSI K8N NEO Platinum Edition PROBLEM

    Hi (my english is not good sorry for that)
    I just got my new computer:
    MSI K8N NEO Platinum Edition
    AMD Athlon64 3200+
    Western Digital Caviar 160Gb
    PNY Verto GeForce 6800Ultra 256Mb
    1GB Value Select pc3200
    Levicom 500W
    The Problem is that when i start the computer, it boot and die directly no bootscreen what so ever, it boot and die.  i dont know what to do plz help me

    Make sure you have Both the ATX Wires on.. theres the Big one! (21Pins i think).. and the Small 4Pin Connector both need to be connected.. if you havent done so yet.. Another thing you could do is Take everything out and place it on a cardboard or something appropriate for the mobo.... I think your motherboard is shorting?.. if it's touching your case.. I had somewhat the same issue long time ago.. give it a try..if you want hope it helps..

Maybe you are looking for

  • How can i share an iTunes account with two MacBooks and two separate i clouds?

    Me and my mom share a i tunes music library, but unfortunatly out i clouds got put together as one how can you have two seperate i clouds and share a music library ?

  • Webcam Freezes during call

    Hi, I hope someone can help me here. I have an HP probook 6565b. What happens to me is that after a few seconds of transmitting video, my webcam freezes and stops transmitting leaving a still image of me up there. I can turn off the video and turn it

  • I need to reinstall Acrobat Pro X on my reformatted hard drive

    I bought the software in 2012, but when I had to reformat my hard drive, I lost it. Can't find how to download on the Adobe site. Can anyone tell me where to go?

  • One picture in more Color label set?

    It's possible to have more "label text" on one picture? I have more "color label set" (category, portfolio, web....) but I can't join the same picture to more color label set. How do you use label set?

  • Adobe Export Failed

    I purchased Adobe Export in order to capture one photograph from a book that was on PDF.  I read your information online prior to purchasing and there was no mention of any size limitation.  While I knew the book was large, there was no reason to thi