MSI K8N NEO PLATINUM (RAM/HD problem/mobo problem?) [SOLVED]

my setup:
windows xp pro sp2
amd athlon 64 3200+
msi k8n neo plat - 7030 - bios 2.1
x800 xt vid
sound blaster audigy 2
kingston valueram pc3200 2x512 cas 3-3-3-8
ps = antec 430 watt truepower power supply (20 A on 12V)
I dont know if you guys remember my but i created a topic on here a while back about how my keyboard and mouse suddenly stopped working, well that turned out to be that the msi k8n neo platinum just went bad. So i RMA'd it and recently got the replacement board (with latest bios already installed). It worked completely fine for about a day. Well that same day i got it back, i installed a Logitech G7 USB wireless mouse. after i installed it, i began getting numerous windows stop blue screen errrors, even after i removed the mouse from control panel. So i figured i should format because to rule out everything and start fresh. So i did a FULL format and attempted the reinstall windows again. AFTER the format and BEFORE windows attempted the continue installation, i got the same stop error. I figured now this was a hardware problem. So first i tested RAM. I got the latest version of memtest86 and let it run for 4 hours (11 passes) with NO errors at all. Secondly, i got a western digital hard drive diagnostic program to test for failing hard drive and again no problems with that. I still suspected ram so i tried to boot with only 1 stick installed (in first slot), however the PC didnt boot at all (cleared cmos too). So i moved it to the second slot and cleared cmos again and this time it posted but it just hangs at a cursor and does nothing, same thing happened with third slot. I tried this same procedure clearning cmos each time with the second ram stick and got the SAME results. Shouldnt the motherboard boot with only 1 ram stick installed? Did MSI RMA me another bad board? Any help would be appreciated. thanks.

Quote from: russellmrgn on 28-March-06, 10:54:39
Sap147
Can you give us what the D-Bracket was showing ie
R R
G R
As an example this means "Initializing Keyboard Controller"
You will find this information in the manual page 2-23. (On mine) under Hardware Setup
Also can you please do all your tests with the ps2 keyboard and mouse and for now leave your Logitech G7 USB wireless mouse to one side.
Russell
for two sticks of ram = RR
GG
for one stick of ram = GR
GG
as for the g7, it hasnt been plugged in at all, i took it out long ago.. as for the ram, the timing was set to 2T, no overclocking, i will try 2.7 v and let you know, but for the record, it has been running at normal voltage settings for about a year perfectly fine.

Similar Messages

Help: MSI K8N Neo Platinum

I've had nothing but problems trying to get this system running properly at any overclocking selections. Can you please review my components and give me suggestions on how to improve my situation.
Currently my know problems are 1. The Mother Board will only read my (2) 200/Gig Hard drives as 127/Gigs. 2. Slighest overclocking & system won't boot up.
Components:
Processor: A64 3200+ NewCastle
MoBo: MSI K8N Neo Platinum
MSI K8N Neo Platinum
Ram: Kingston HyperX 2048 PC3200 400Mhz (2 x 1024MB)
Kinston Ram - Tiger Direct
Video: MSI N5900 Ultra-VTD 256
MSI 5900 Ultra
Hard Drives: (2) 200 Gig Seagates
Power: 500W Aspire
3DMark2001 SE Score: 6300
Ok, everything I bought I got because it said it had Overclocking capabilities. So far any attempts to O.C. the system won't boot up properly.
WHAT DO I DO?
Thoughts on my other components???

The first thing you need to do is tighten them memory timings you killing your a64's performance
try 2.5,3,2,8 t1 2.7v
Get the latest bios for the neo it is a truly fast board when set up right.
Your 3d mark 01 should be in the 15k to 20k range
If you are running 200gb hdds you need to run sp1 on windows xp as xp does not recognise drives over 137gb
run your pci at 67 or 68
drop your htt to 3x
before you try to over clock you system get it running well at stock speeds or you will end up in a mess, there is not much point o/cin if its not.
Msi neo need a bit of tweaking but it runs like a dream when you do.
All your parts look ok

MSI K8N Neo Platinum & Crucial Ballistix 512MB RAM Problem

I have had MSI K8N Neo Platinum and 1x Crucial Ballistix 512MB RAM for 11 months.
I have had 1x Crucial Ballistix 512MB RAM for 2.5 months, for a total of two.
I have had MSI GeForce 6600GT (NX6600GT-VTD) 128MB AGP for 1 month.
For about 1.5 to 2 weeks, I have been seeing random crashes while playing PC games.
I started a thread on the Hard OCP forums a few days ago. I did not know MSI had forums =)
Rather than re-typing, I may as well just post the link:
http://www.hardforum.com/showthread.php?t=934956
My issue is also similar to this one:
https://forum-en.msi.com/index.php?topic=83799.0
Thanks for the help.

ALL RIGHT, after almost FOUR months my issue is FINALLY resolved.
It is amazing how much time passes when you are hesitant to buy parts unless you are 95% sure it will fix the problem.
OK, here is an update as to what I remember.
I went to BIOS 1.4 and tried many different physical and BIOS RAM configurations (Different seating, different number of DIMMs, different RAM timings, voltages, etc).
I concluded that I could not make my PC 100% stable, but I could get it darn close. With certain settings, such as DDR400, 2-2-2-6, 1T, 2.80V, Aggressive Timing enabled, Memtest failed test #5 every time (this is spec for my RAM). With other settings, such as DDR333, 2.5-3-3-7, 2T, Auto V, Aggressive Timing enabled, Memtest failed test #5 maybe once out of 5000.
I also concluded that the RAM voltage and Aggressive Timing setting was having a big impact. Some settings would not work (failed Memtest) with RAM at 2.80V but would work with RAM at Auto V. Some settings would not work (failed Memtest) with Aggressive Timing enabled but would work with it disabled.
Finally, I started to occasionally get R,G,R,G (Processor Initialization) on the D-Bracket upon cold-start & warm-start, which suggests a PSU issue:
https://forum-en.msi.com/index.php?topic=76972.msg542545#msg542545
That pushed me over the top, and I decided to buy a new PSU (TG-480-U22) and a new SATA HDD (WD2500KS) just because.
Problem solved. Thanks for all the help.
I will continue to buy MSI in the future just because of these forums…and a good product of course!

MSI K8N Neo Platinum with Vapochill Case problems - Help anyone. :)

Hi all,
Had a bit of a tricky problem and as Im new to this board I have no idea what could be causing this.
First all all system specs:
Athlon 64 3700+ Clawhammer
MSI K8N Neo Platinum -
1 gig Corsair XMS ProL Low Latency Ram (2 x 512mb)
Nvidia Gefore 6600GT
1 x WD Raptor 10000rpm HD
NEC 2500a DVD writer.
Eye-T 550w PSU.
Vapochill SE Case with installed Vapochill Phase change cooling.
Here are photos of it in its present state, you will notice that it isnt installed in the case at the moment.
The reason for that is because the two wont work together and I want them to so so bad...
So, hopefully someone here can save the day for me - here goes.
I have tested the Motherboard and all other componants outside of the case and everything runs smoothly and there are no problems what so ever, great.
I have also retested the Vapochill case with another motherboard and that also works without a hitch.
The problem comes when I insall the MSI board into the system, all hooked with a really basic setup, PSU, Case cooling, CPU and Ram. Flick the on switch on the power suply and the system turns on for around 1/2 a second then turns off again. I found this strange because it soundnt come on at all until I press the power button.
If I press the power button the same thing will happen over and over.
I have tried a different powersupply and this does nothing at all.
I have checked for shorts and there is no possible way it is shorting on anything.
I have a fan plugged in where the CPU fan would go and this doesnt help.
I have taken it back out and tested it again and it still works ok.
Does this sound familiar to anyone? Are there any secret Bio's menu's that would have an option that would solve this?
Any help would be greatly appreciated.
Glenn

When you are running the MoBo standalone, what are you connecting to the Power, Reset, HDD, etc. pins ? Are you using the wires from the Vapochill case, or something else ? It looks like a single cable with an intermittent switch (red/white cable). I once had a similar sort of problem and it was because I hadn't connected up (the incredibly fiddly) cables correctly. Other than that, I would have gone for a short of some sort - but you have checked that already, so . . . .
As to the system starting to power-up when you switch on the PSU, I wouldn't worry too much about this. It seems to happen from time to time with some of my systems - amongst other things, the BIOS can be set to resume to previous state after a power-fail.

MSI K8N NEO Platinum Edition PROBLEM

Hi (my english is not good sorry for that)
I just got my new computer:
MSI K8N NEO Platinum Edition
AMD Athlon64 3200+
Western Digital Caviar 160Gb
PNY Verto GeForce 6800Ultra 256Mb
1GB Value Select pc3200
Levicom 500W
The Problem is that when i start the computer, it boot and die directly no bootscreen what so ever, it boot and die. i dont know what to do plz help me

Make sure you have Both the ATX Wires on.. theres the Big one! (21Pins i think).. and the Small 4Pin Connector both need to be connected.. if you havent done so yet.. Another thing you could do is Take everything out and place it on a cardboard or something appropriate for the mobo.... I think your motherboard is shorting?.. if it's touching your case.. I had somewhat the same issue long time ago.. give it a try..if you want hope it helps..

MSI k8n neo platinum post problem

I just bought a 2nd hand K8N neo platinum and I can't get it to post, I have reduced down to 1 stick of ram(tried all slots) vga and cpu running out of case. I have an ultra 600 psu that certainly should be doing the buisness as everything was fine on an NF7S-V2 up until 1/2 hour prior.
On the led device it's starting 4 red then after a couple of seconds it goes 1 red 2 red 3 green 4 red which I found relates to keyboard controller. I've tried with various keyboards but no joy. I get nothing on the screen at all but that's the next stage in post.
My memory is Twinmos 3200 twin x 2 x 512 double sided, which I saw in the sticky can be troublesome.
Any body got any ideas?

i am having an almost identical problem.
First the system wont go past post,then i realised it would but only boot if i had the USB mouse unplugged (i noticed the d-brackets lights changed after i unplugged the mouse)
then i was able to get to windows, however i couldn't do much (mouse wouldnt detect if replugged, keyboard not detected - all lights off)
So i tried clearing the CMOS
now i am having the same problem, except this time i get CMOS checksum error - defaults loaded
then it tells me to press f1 to continue to del to enter setup, which i cant do since the keyboard wont work. so now im totally bamboozled
I've tried changing the PSU as well with no luck (both were 500watts)
Funny thing is, the pc having the problem is identical to the pc im writing on now, presonally i think the motherboard is not v good, since alot of people have this problem or similar to it. (and yes im using the keyboard and mouse now, that i tested on the other pc)
SPECS:
MSI k8N Neo Platinum
Powercolor Radeon 9800 Pro
AMD 64 3000+
1GB Geil Memory
Maxtor 160GB
500watt Magna Dual Fans
Will check what the D-bracket says and will report back.
ok here goes:
(with usb mouse plugged in)
1= green
2= red
3=red
4=green
(without usb mouse plugged in) - but bare in mind i cant press f1 (no keyboard) to continue else i would probably be able to get to windows.
1= green
2= green
3=green
4=red

Problems with 64 3200+ on MSI k8n neo platinum.

AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
Okey here it comes..
I installed everything and all seemed to work okey, until i threw in the XP install cd and began my install..
in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and the install moves on, this accurs 4-5 times and then it gives me a BIG "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
changed hdd, change gfx-card. change psu, removed all no-need pci-cards..
but still same error, i aint no expert so i might have missed something in bios or something :(
please help me if you can..

Flashing bios with memory errors is a veeeeery bad idea .
Almost guarantied to ruin your bios chip with bad data block.
That this even is suggested with mem errors , well .
You need to resolve the mem errors before doing anything else.
The windows xp install routine is a very heavy user of cpu and memory
and will fail if you have mem errors like you have.
Some things to try is entering bios and change auto settings on cpu voltage
giving it 0.5v more than default .
Set the memorys voltage to vendors max approved voltage
which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
Disconnect all devices not needed for a windows install ,things can be added later.
Have only the hd that os is to be installed to , one cdrom , floppy , memory and
gfx card .
Disconnect USB case front connector (cause corruption and strange faults if
USBOC pin is connected)

Msi k8n neo platinum ps2 keyboard problem

Hi. I'm having issues with my msi k8n neo platinum motherboard. I've read about 50 posts on these forums regarding the supposed ps2 keyboard issues with recent msi boards. However none of them seems to address my current situation.
Like many others, when I power up my system the cpu fan spins for like 3 seconds then everything comes to a halt.
I tried many things to get my system to boot and the only thing that works is plugging my ps2 keyboard into the ps2 mouse port and moving the ps2 mouse into a usb port with an adapter.
It seems there's no hope for fixing the problem other than RMA'ing, but I thought I would add to the pile of complaints stacking up against the MSI boards.

if u had read the threads a little more u might have found a solution that seems to have worked 4 many - a usb keyboard usb Keyboard if u go this route dont forget to enable usb kb in bios
Edit: This Thread Summarises the situation PS2 keyboard/mouse causes random shutdowns or doesnt work

Any MSI K8N NEO Platinum Edition S754 nForce3 users?? Need advice..

Hi, thinking of building a budget system around a S739 Clawhammer 3700 with an
MSI K8N NEO Platinum Edition S754 nForce3 board. But have a few concerns..
- Will this board run on this chip or will it need updated BIOS to do so?
- Will it work with crucial 3200DDR memory.CL=3 • UNBUFFERED • NON-ECC • DDR400 • 2.6V • 64Meg x 64 ?
- Can it take an extra (3rd) 512 stick of this ram?
Thanks.

I have ran the Neo s754 model with 2 * crucial CT6464Z40B 512MB cas 3 modules and never had one single problem with the combination
of A64 GC version , mobo and RAM .
Three modules is tough on the single channel memory controller though , as it would have to deal with 6 banks
and you probably see the ram max speed as DDR333 and 2T commandrate is what it can cope with.

"error loading operating system MSI K8n Neo platinum

OK,
System will post, according to MSI Website I have the latest Bios version.
I can boot from CD.
The only odd item is that I am using the HD that I took out of my old computer with windows already on it.
Tried re-installing windows XP. It went through the loading process and then rebooted. Same error message appears.
Also, is 48 degrees normal for idle temp on CPU AMD 64 3400? 36 degrees NB temp ok?
Oh, yeah, I have a floppy installed, CD-ROM, CD RW, all non SATA. Using IDE cables.
Video is Asus V9980 ultra GeForce FX 5950.
MSI K8N Neo Platinum
AMD 64 3400
Hercules 600 W PSU
WD 80gb HD
Generic CD-Rom
Sony Cd-RW
2 x 512 crucial 400 ddram slosts 1 and 2
Asus V9980 ultra GeForce FX 5950 256 TVD
Do I need to clear bios and re-start?
HD is on it's own cable in IDE 1
Cds on IDE 2 shared.
let me know what you think.
The other related posts I read, people were using raid or multiple OS. I'm not.

I had the same issues as you sometimes Windows would install and sometimes it wouldn't the problem was related to ram. I had my ram in slots one and two like you did and I moved the ram to slots 1 and 3 and now the machine is rock solid stable.
I think most of the problems people are having are actually more ram related than anything else.
So try moving the stick of ram you have in slot 2 to slot 3 and see if this solves your problem. This solution is on forums somewhere I am just not sure where.
Take care,
Bob

MSI K8N Neo Platinum - CPU Cooler?

Hi there, this is my first post to the forum and hope that someone can help
Bascially I've just purchased a MSI K8N Neo Platinum mobo to use with an AMD 64 2800.
I'm wondering if I should use the stock CPU cooler or look to purchasing a cooler such as a Zalman? I want to keep the computer as quiet as possible.
I've recently read that it would be better to use the Cool and Quiet option with the stock CPU cooler instead?

Chris,
If you don't mind a used one, there are probably about a hundred thousand available ones from people in these forums who has upgraded their heatsinks, and that's about everyone
The problem is, we dont want to give them up. We bought the retail package with fan not because of the free heatsink/fan, but because of the 3 year warranty that you only get with said combo. To invoke the warranty, we'd have to return everything, including the heatsink/fan, so we hang on to it and let it collect dust.
So, for an aftermarket fan. If you don't plan to overclock, ever, the thermaltake silent boost K8 will do, although it is nowhere NEAR the 21dB that tt claims. They are known for shall we say, exaggerated claims. But it's certainly quieter than the stock HSF, and it's available everywhere.
Note that the "silent boost k8" is different from the "silent boost". The latter is for socket 462 I think.

Newb Question MSI K8N Neo Platinum.

okay i have my parts coming in for my first build ever(i'm nervous, but anxious at the same time) and i just got my MSI K8N Neo Platinum today, all the other parts will come in the next couple of days, cpu arrives next week i believe, specs:
Antec P-160WF
OCZ 520w
Athlon 3400+
mobo(above)
1g corsair
160 Samsung S-ATA HD
I've been going over the mobo manual and i'm confused. I'm not familiar with raid and never had a sata drive, do they go hand and hand? Meaning do i have to set up a raid to use the s-ata drive or do i just plug the sata drive into the mobo and everything will work, loading up windows xp and all? I don't want to use raid, but do i have to? i'm trying to make this build as simple as possible since it's my first time, i know this is probably a dumb question, i'm just new at this.....don't be surprised to see more dumb questions in the coming weeks! thanks.

Quote
Originally posted by onebyte
>>Meaning do i have to set up a raid to use the s-ata drive or do i just plug the sata drive into the mobo and everything will work, loading up windows xp and all?
In a word, no.
I've just fired up my first homebuilt last night. Joy! It's all went perfect on the first power-up. I'm in a similar position, and have a single SATA Hitachi Deskstar. Although I've not yet installed an OS, my understanding is that the Serial ATA interface will work just fine with a single drive. No multiple drive RAID is needed.
My understanding is that all you have to be sure to do is load the SATA drivers from the included diskette, by pressing F6 on boot up. Otherwise the drive won't be properly recognized by the bios. I haven't done this yet, and its still showing as an IDE drive in some places of my bios setup.
If I had it to do over again I doubt I'd spend the extra dollars to go SATA with a single HD. It adds another level of complexity in transferring things to the new machine, and - according to certain authorities -- doesn't really add the extra performance over an ATA 133 that I first thought it would. At least with a 7200 RPM drive, it seems that the 150 or 133 limits never come into play, as the drive's mechanical limitations are less than both... so it's not a bottleneck.
I'm still trying to decide the best way to transfer my Win xp OS and other MS Office programs and updates. I'm not sure if I can clone my PATA HD to the SATA, or if I do what problems I'd have to fix. I've been thinking about transferring a Ghost or Acronis True Image to the new machine and then doing a WinXP repair install to see if I can get everything working with a minimum of time and effort. I'm not sure what to expect, or if it will even work at all. Or if it does, if it will leave me with problems (registry, drivers, etc).
We'll soon see.
Good luck with the build. The only real headache I had, other than getting the HSF uniit on the processor, was trying to connect the case front panel wires for the USB, Firewire, and Audio out and IN jacks, to the mainboard headers. The case wires were single pins and were labeled differently that the MB header block pin assignments. I finally gave up on the audio and firewire, and just used the USB connections after modifying them -- removing the two extra ground wires on pins 9 and 10.
Just take your time and follow the directions. Spend some time looking at the way the heatsink and fan connect onto the processor. Doing that without messing up the thermal compound can be tricky, and the directions from AMD could be clearer on that score.
Again, good luck,
thanks for the info, let me know how it goes...by the sound of what rainz said it seems you don't need to put in that 3.5" floppy disk that came with the mobo, is that right, rainz? Let me know how your OS installs onebyte, i'm curious to know if the SATA gave you trouble or not, wish you luck!

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

Using the Zalman CNPS7000B-AlCu + Zalman ZM80D-HP VGA heatsink on MSI-K8N NEO-Platinum

Hi,
Im buying a Athlon 64 system very soon (today or tommorow) and have the following question regarding the MSI-K8N NEO-Platinum. I know the Zalman CNPS7000B-AlCu fits on the mobo but it gets very close to the videocard. How close does it get? Can I still use the Zalman ZM80D-HP VGA heatsink? If anyone knows this please let me know.
Thanks in advance

Hi SirMurray,
I have the CNPS7000A-AlCu and the ZM80C-HP and the 7000A-AlCu is only about 2cm (maybe less) away from my graphics card. There is no way to have both the 7000A-AlCu and the ZM80C-HP (same goes for ZM80D-HP as Im 99% sure it is the exact same size as the ZM80C-HP) installed together without modifying the ZM80.
I was quite dissapointed about this cause I really wanted to use both so I tried to move the back heatsink of the ZM80C-HP but no matter what I did it just woulnd't fit with the 7000A-AlCu... BUT!...
What I did was to modify the ZM80 so that instead of the heatpipe going from the front to the back of the card as usual, it was turned around, so that the heatpipe now passes in front of the front-side heatsink. I then mounted the other heatsink (usually at the back of the card) so now both heatsinks are situated on one side of the card. Once I locked them in place with the little brackets they give you to join the two heatsinks it was done!
p.s. just in case you are wondering, the heatsinks are quite light so there is no real danger in having both placed on one side of the card. they don't pull the card to one side or stress the gpu mounting gear, etc. any more than having them installed normally. also, they are far enough apart when both on one side of the card for good airflow between them.
This all works for me and I haven't had any problems with it at all. It does mean that the whole graphics card + heatsink covers a LOT of PCI slots (4 I think). This is okay for me as I only have one PCI card (audigy 2) installed. Also, if you need to fit the optional fan for the ZM80 than you might run into trouble as the spacing between the heatsinks is smaller when using this setup than when they are installed as per zalmans instructions (front + back).
Hope this helps!

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

MSI K8N NEO PLATINUM (RAM/HD problem/mobo problem?) [SOLVED]

Similar Messages

Maybe you are looking for