MSI K8N Neo Platinum ... when???

Based off the news on the front page MSI is showing off the new MSI K8N Neo a 754 solution? What is the e.t.a. for this board and suggested price? I am planning on building a A64 setup by the end of this month, begining of next month. I am hoping this board will be out by then? Any ideas?

thanks for reposting wonkka, i was looking all over for it ,
(in another thread to post here) but your 23000 threads are a bit much to skim...lol
I think will be a good improvement for older boards but not worth it from a neofizzer and sporty new colored pcb.
If it just came out when i was upgrading a few months ago......what you buy now is out of date tommorow.......................story of the computer world

Similar Messages

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

MSI K8n Neo Platinum

Hi Guys,
I am having a problem with my computer at the moment. I am having trouble getting into the BIOS of this motherboard (MSI K8N Neo Platinum). When I try to get into BIOS, it goes into a black screen with a little line on top of it and its blinking. This has never happened before. Then when I shut off my computer since I couldn't get into the bios, I turned it back on and it goes on but nothing goes to screen or it wont boot up to startup screen. Then I turn it off, I reset the BIOS and turn it back on. Now it boots up to the startup screen, but when it says press del to get into bios, I pressed that and it happens again, it will not get into bios. When I do this over again by resetting the bios, this time without getting into BIOS, it goes on and boots up to Windows XP. I want to reformat my hard drive with a fresh copy of XP Pro, but I can't get into BIOS to do that. Can someone help me?

Same thing happened to me today. Thanks MSI for publishing a Betaversion of a BIOSupgrade on the Live update..
At first I figured that there must have been some fault during the BIOSflash so I downloaded the file again and repeated procedure. This time it worked like a charm and I could do all my BIOS-settings. The next restart the problem was back again though, and this time I had swapped the order for my SATA-drives to boot (to the way they should) but the system couldn't boot. So I couldn't enter neither the bios or Windows. Luckily you can shift the primary boot device by pressing F11 though, so I got out of the libido...
Now I've downloaded the old 1.9 Version instead and I sure as h*** won't do any more beta-testing for MSI by using the Live Update anymore!

MSI K8N NEO Platinum Edition memory question

Hi there,
I've currently got a MSI K8N NEO Platinum Edition (Nforce 3) motherboard and 2X 512 MB Corsair Value Select memory modules (both double sided) running at DDR 400 - this runs completely stable and has done for a number of months. I would like to increase my memory to 1.5 Gig but there seems to be a lot of issues?
I originally planned to buy an additional 512 Meg Corsair value select chip and place it in Bank 3 - is this acceptable?
I assue that i would have to drop the speed down to DDR 333 from 400, could anyone tell me how much of a difference this actually makes (when playing FPS games Doom3 etc..) ?
Any help would be greatly appreciated as i've been looking through both this forum and the Corsair one and i cant seem to find the answer.
thanks in advance !

Just note that there are combinations of two sticks that will also make the board run in DDR333 mode (see page 2-8 of the manual). For example, using two double-sided sticks in DIMM2 and DIMM3. I've actually managed to get it to work at DDR400 in those two slots, but it's not perfectly stable and overclocking diminishes drastically. Bottom line is the system will work fine when forced to DDR333...as long as you don't expect to overclock the RAM to any significant degree.

Problems with 64 3200+ on MSI k8n neo platinum.

AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
Okey here it comes..
I installed everything and all seemed to work okey, until i threw in the XP install cd and began my install..
in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and the install moves on, this accurs 4-5 times and then it gives me a BIG "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
changed hdd, change gfx-card. change psu, removed all no-need pci-cards..
but still same error, i aint no expert so i might have missed something in bios or something :(
please help me if you can..

Flashing bios with memory errors is a veeeeery bad idea .
Almost guarantied to ruin your bios chip with bad data block.
That this even is suggested with mem errors , well .
You need to resolve the mem errors before doing anything else.
The windows xp install routine is a very heavy user of cpu and memory
and will fail if you have mem errors like you have.
Some things to try is entering bios and change auto settings on cpu voltage
giving it 0.5v more than default .
Set the memorys voltage to vendors max approved voltage
which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
Disconnect all devices not needed for a windows install ,things can be added later.
Have only the hd that os is to be installed to , one cdrom , floppy , memory and
gfx card .
Disconnect USB case front connector (cause corruption and strange faults if
USBOC pin is connected)

Help with MSI K8N Neo Platinum

HELP please- motherboard MSI K8N Neo PLATINUM: I tried to take away the backplate for the heatsink (on the back side of MB) in order to install the zalman HS beafore i read the forum (use a fan...) and the worst of all happend:
I scratched the back surface!! the scratches are minor, that is 4 scratches half a milimeter long each and not deep but i can see the copper of some lines leading from the memory slots to the processr. My question is : can I try and build the computer on that motherboard anyway or better buy a new one? is there a risk of dammaging other components? oh god what a mistake!

Make sure the new backplate is non-conductive. The backplate for the Hyper 6 has a non-conductive sticker on it. Make sure to keep it on if youve got one... If the lines are exposed even with the back-plate on perhaps you should cover them with some non-conductive (100% non conductive!) tape or something.
Then it doesnt matter if they are exposed, as long as they are ok.
A good tip, which got when i was removing my backplate, is to use a blow dryer to heat it up and the remove it with your fingers. That way youll also notice if it gets to hot
The glue gets sticky at blow drier temps. And pls, dont singe the MB with your blow dryer, you only have to make it hot, and if you cant touch it, how can you remove it with your fingers?
I guess theres no way of telling if you have a serious prob and no way to tell if your cpu will be ok. I guess you could (?) try and start it wíthout anything (cpu, mems) but a PSU, and then, if it (and maybe the PSU) goes "!Pfsssssss!" or "bang!", youll now you will have to replace it.
I put a screwdriver through an asus board once, and it still worked...

MSI K8N NEO Platinum Edition PROBLEM

Hi (my english is not good sorry for that)
I just got my new computer:
MSI K8N NEO Platinum Edition
AMD Athlon64 3200+
Western Digital Caviar 160Gb
PNY Verto GeForce 6800Ultra 256Mb
1GB Value Select pc3200
Levicom 500W
The Problem is that when i start the computer, it boot and die directly no bootscreen what so ever, it boot and die. i dont know what to do plz help me

Make sure you have Both the ATX Wires on.. theres the Big one! (21Pins i think).. and the Small 4Pin Connector both need to be connected.. if you havent done so yet.. Another thing you could do is Take everything out and place it on a cardboard or something appropriate for the mobo.... I think your motherboard is shorting?.. if it's touching your case.. I had somewhat the same issue long time ago.. give it a try..if you want hope it helps..

MSI K8N Neo platinum sound prob

Hi!!
I got myself a MSI K8N Neo platinum...
every 20 secondz my music hangz...
why? don't ask me.
any answers? and when my music hangs I have a look at the ctrl+alt+delete menu and I see that my cpu load goes to 46 percent when the music stops...
help...
cheerz Xyus!!

Hi!!
I got myself a MSI K8N Neo platinum...
every 20 secondz my music hangz...
why? don't ask me.
any answers? and when my music hangs I have a look at the ctrl+alt+delete menu and I see that my cpu load goes to 46 percent when the music stops...
help...
cheerz Xyus!!

MSI K8N Neo Platinum & Crucial Ballistix 512MB RAM Problem

I have had MSI K8N Neo Platinum and 1x Crucial Ballistix 512MB RAM for 11 months.
I have had 1x Crucial Ballistix 512MB RAM for 2.5 months, for a total of two.
I have had MSI GeForce 6600GT (NX6600GT-VTD) 128MB AGP for 1 month.
For about 1.5 to 2 weeks, I have been seeing random crashes while playing PC games.
I started a thread on the Hard OCP forums a few days ago. I did not know MSI had forums =)
Rather than re-typing, I may as well just post the link:
http://www.hardforum.com/showthread.php?t=934956
My issue is also similar to this one:
https://forum-en.msi.com/index.php?topic=83799.0
Thanks for the help.

ALL RIGHT, after almost FOUR months my issue is FINALLY resolved.
It is amazing how much time passes when you are hesitant to buy parts unless you are 95% sure it will fix the problem.
OK, here is an update as to what I remember.
I went to BIOS 1.4 and tried many different physical and BIOS RAM configurations (Different seating, different number of DIMMs, different RAM timings, voltages, etc).
I concluded that I could not make my PC 100% stable, but I could get it darn close. With certain settings, such as DDR400, 2-2-2-6, 1T, 2.80V, Aggressive Timing enabled, Memtest failed test #5 every time (this is spec for my RAM). With other settings, such as DDR333, 2.5-3-3-7, 2T, Auto V, Aggressive Timing enabled, Memtest failed test #5 maybe once out of 5000.
I also concluded that the RAM voltage and Aggressive Timing setting was having a big impact. Some settings would not work (failed Memtest) with RAM at 2.80V but would work with RAM at Auto V. Some settings would not work (failed Memtest) with Aggressive Timing enabled but would work with it disabled.
Finally, I started to occasionally get R,G,R,G (Processor Initialization) on the D-Bracket upon cold-start & warm-start, which suggests a PSU issue:
https://forum-en.msi.com/index.php?topic=76972.msg542545#msg542545
That pushed me over the top, and I decided to buy a new PSU (TG-480-U22) and a new SATA HDD (WD2500KS) just because.
Problem solved. Thanks for all the help.
I will continue to buy MSI in the future just because of these forums…and a good product of course!

Msi k8n neo platinum ps2 keyboard problem

Hi. I'm having issues with my msi k8n neo platinum motherboard. I've read about 50 posts on these forums regarding the supposed ps2 keyboard issues with recent msi boards. However none of them seems to address my current situation.
Like many others, when I power up my system the cpu fan spins for like 3 seconds then everything comes to a halt.
I tried many things to get my system to boot and the only thing that works is plugging my ps2 keyboard into the ps2 mouse port and moving the ps2 mouse into a usb port with an adapter.
It seems there's no hope for fixing the problem other than RMA'ing, but I thought I would add to the pile of complaints stacking up against the MSI boards.

if u had read the threads a little more u might have found a solution that seems to have worked 4 many - a usb keyboard usb Keyboard if u go this route dont forget to enable usb kb in bios
Edit: This Thread Summarises the situation PS2 keyboard/mouse causes random shutdowns or doesnt work

MSI K8N NEO PLATINUM BlueScreen Issue! Help!

I'm having an issue with my MSI K8N NEO i get the blue screens occasionally.. A friend of mine says its a IDE driver issue.. LMK Here are the system specifications.
MSI K8N NEO PLATINUM
ATHLON64 3000+ @2.01 (stock)
SAMSUNG 512MB PC3200 CAS 2.5
PNY MX440 64MB DDR AGP8X
MAXTOR DIAMONDPLUS MAX 8 40GB, 7200RPM SLIM
300W GENERIC PS
LMK whats wrong if you have ideas, i dont know if you have sufficient information to come up with a conclusion.. im not too sure whats going on either.. But A friend of mine is getting exact same issues he says its IDE conflicts.. now when the Blue screen comes up it doesnt stay long enough to give a moment to read it.. lmk if you have ideas thx..

which drivers are you using?
Right click MY computer -> properties -> Advance -> start up and recovery -> system failure -> uncheck "automatically restart"
this way it will stop at the blue screen and get an stop error number
Or view the error log
Help and support -> Pick a Task ->Use Tools to view your computer information and diagnose problems ->under Tools -> my computer Information-> View Advanced System Information -> View error log
it shows all errors by date migh provide you error numbers ie. 0x000008e

Help: MSI K8N Neo Platinum

I've had nothing but problems trying to get this system running properly at any overclocking selections. Can you please review my components and give me suggestions on how to improve my situation.
Currently my know problems are 1. The Mother Board will only read my (2) 200/Gig Hard drives as 127/Gigs. 2. Slighest overclocking & system won't boot up.
Components:
Processor: A64 3200+ NewCastle
MoBo: MSI K8N Neo Platinum
MSI K8N Neo Platinum
Ram: Kingston HyperX 2048 PC3200 400Mhz (2 x 1024MB)
Kinston Ram - Tiger Direct
Video: MSI N5900 Ultra-VTD 256
MSI 5900 Ultra
Hard Drives: (2) 200 Gig Seagates
Power: 500W Aspire
3DMark2001 SE Score: 6300
Ok, everything I bought I got because it said it had Overclocking capabilities. So far any attempts to O.C. the system won't boot up properly.
WHAT DO I DO?
Thoughts on my other components???

The first thing you need to do is tighten them memory timings you killing your a64's performance
try 2.5,3,2,8 t1 2.7v
Get the latest bios for the neo it is a truly fast board when set up right.
Your 3d mark 01 should be in the 15k to 20k range
If you are running 200gb hdds you need to run sp1 on windows xp as xp does not recognise drives over 137gb
run your pci at 67 or 68
drop your htt to 3x
before you try to over clock you system get it running well at stock speeds or you will end up in a mess, there is not much point o/cin if its not.
Msi neo need a bit of tweaking but it runs like a dream when you do.
All your parts look ok

MSI K8N Neo Platinum with Vapochill Case problems - Help anyone. :)

Hi all,
Had a bit of a tricky problem and as Im new to this board I have no idea what could be causing this.
First all all system specs:
Athlon 64 3700+ Clawhammer
MSI K8N Neo Platinum -
1 gig Corsair XMS ProL Low Latency Ram (2 x 512mb)
Nvidia Gefore 6600GT
1 x WD Raptor 10000rpm HD
NEC 2500a DVD writer.
Eye-T 550w PSU.
Vapochill SE Case with installed Vapochill Phase change cooling.
Here are photos of it in its present state, you will notice that it isnt installed in the case at the moment.
The reason for that is because the two wont work together and I want them to so so bad...
So, hopefully someone here can save the day for me - here goes.
I have tested the Motherboard and all other componants outside of the case and everything runs smoothly and there are no problems what so ever, great.
I have also retested the Vapochill case with another motherboard and that also works without a hitch.
The problem comes when I insall the MSI board into the system, all hooked with a really basic setup, PSU, Case cooling, CPU and Ram. Flick the on switch on the power suply and the system turns on for around 1/2 a second then turns off again. I found this strange because it soundnt come on at all until I press the power button.
If I press the power button the same thing will happen over and over.
I have tried a different powersupply and this does nothing at all.
I have checked for shorts and there is no possible way it is shorting on anything.
I have a fan plugged in where the CPU fan would go and this doesnt help.
I have taken it back out and tested it again and it still works ok.
Does this sound familiar to anyone? Are there any secret Bio's menu's that would have an option that would solve this?
Any help would be greatly appreciated.
Glenn

When you are running the MoBo standalone, what are you connecting to the Power, Reset, HDD, etc. pins ? Are you using the wires from the Vapochill case, or something else ? It looks like a single cable with an intermittent switch (red/white cable). I once had a similar sort of problem and it was because I hadn't connected up (the incredibly fiddly) cables correctly. Other than that, I would have gone for a short of some sort - but you have checked that already, so . . . .
As to the system starting to power-up when you switch on the PSU, I wouldn't worry too much about this. It seems to happen from time to time with some of my systems - amongst other things, the BIOS can be set to resume to previous state after a power-fail.

MSI K8N Neo Platinum - no Qool & Quiet

hy,
i spend the whole day reading lots of threads about enabling cool&quiet but in my case nothing worked.
- Athlon 64
- MSI NEO PLATINUM
- BIOS 1.4
- ProcessorDriver 1.1.00
- C&Q enabled in Bios
- xp spII
The moment i try to switch to Minimal Powersavings the system immediately
freezes when i press ok.
If i could enable it, it might work, but i cant reach this level.
Any Suggestions? probably BiosBeta 1.5 will fix something?
thanx,
mike

huaaaa....
i postet as well in a german thread and there was a reply wich did it:
bios -> B6 did it.
http://forum.hardware.fr/hardwarefr/Hardware/-Topik-Unique-MSI-K8N-Neo-Platinum-Athlon-64-BIOS-1-40-Officiel-sujet-624644-1.htm
its a french side but now everything works works fine!
mike

Bios from my Msi k8n Neo Platinum (socket 754)

Wich is the last beta bios from my Msi k8n Neo Platinum (socket 754) ?
And where download?
Thanks

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

Using the Zalman CNPS7000B-AlCu + Zalman ZM80D-HP VGA heatsink on MSI-K8N NEO-Platinum

Hi,
Im buying a Athlon 64 system very soon (today or tommorow) and have the following question regarding the MSI-K8N NEO-Platinum. I know the Zalman CNPS7000B-AlCu fits on the mobo but it gets very close to the videocard. How close does it get? Can I still use the Zalman ZM80D-HP VGA heatsink? If anyone knows this please let me know.
Thanks in advance

Hi SirMurray,
I have the CNPS7000A-AlCu and the ZM80C-HP and the 7000A-AlCu is only about 2cm (maybe less) away from my graphics card. There is no way to have both the 7000A-AlCu and the ZM80C-HP (same goes for ZM80D-HP as Im 99% sure it is the exact same size as the ZM80C-HP) installed together without modifying the ZM80.
I was quite dissapointed about this cause I really wanted to use both so I tried to move the back heatsink of the ZM80C-HP but no matter what I did it just woulnd't fit with the 7000A-AlCu... BUT!...
What I did was to modify the ZM80 so that instead of the heatpipe going from the front to the back of the card as usual, it was turned around, so that the heatpipe now passes in front of the front-side heatsink. I then mounted the other heatsink (usually at the back of the card) so now both heatsinks are situated on one side of the card. Once I locked them in place with the little brackets they give you to join the two heatsinks it was done!
p.s. just in case you are wondering, the heatsinks are quite light so there is no real danger in having both placed on one side of the card. they don't pull the card to one side or stress the gpu mounting gear, etc. any more than having them installed normally. also, they are far enough apart when both on one side of the card for good airflow between them.
This all works for me and I haven't had any problems with it at all. It does mean that the whole graphics card + heatsink covers a LOT of PCI slots (4 I think). This is okay for me as I only have one PCI card (audigy 2) installed. Also, if you need to fit the optional fan for the ZM80 than you might run into trouble as the spacing between the heatsinks is smaller when using this setup than when they are installed as per zalmans instructions (front + back).
Hope this helps!

MSI K8N Neo Platinum ... when???

Similar Messages

Maybe you are looking for