MSI K8N Neo XP Problems

I just got a MSI K8N Neo Platinum with a 3200 Clawhammer and a 160 GB Seagate Hard drive. Cooling is an SLK-948 with an Enermax 92mm 2800 RPM fan and a Antec 400 watt PSU. Ram, ive tried both 2700 and 3500. My system posts ok then i reformat but when it starts installing the setup files it gives me a blue error screen saying the system was halted. Ive also tried reformating on another computer. Then I just launch the XP setup from the A64 system. All goes well and everything installs until the very end i get the error screen again. I am not overclocking or anything, all bios settings are default as i just got this setup. Ive also tried my seagate harddrive on my other computer and it has none of these probelms.

Start by eliminating possible causes 1 at a time.
I'd start with the RAM. Set your BIO's to default (compatability) settings. Use 1 stick to start in slot zero.
If you have another PC to work with (w/ internet access) download and create a bootable CD with memtest86. You can get it here: Test Your Memory If not, perhaps a friend can save it to disk for you.
It's a decent memory tester and has helped me on more than one occassion. The last time with a 256mb stick of PC2700 Mushkin. For some reason the FIC board it was on didn't like it. Everytime I went to install XP it would fail in different places for strange reasons. Since I'd used the disk successfully just recently before, I ran memtest86 and discovered the problem.
The next thing I'd examine is the CD/DVD-ROM drive(s). I can't count the number of times I've gone to upgrade a machine, keeping the CD drive, only to discover XP doesn't like the drive. If you're drive is older, buy a new one. Don't install using a DVD drive (so they say - I don't have one).
If all else fails use the diagnostic LED's to try and track the problem.

Similar Messages

Msi k8n neo plat problems

I have built 2 computers exactly the same.
msi k8n neo plat
512 corsair xms ddr 3200
8og sata maxtor
amd 64 3200
128mb ati 9800 pro
asus cd drive
When i tried to install windows xp pro on both the machines i got the same error. could not copy file. On each try the file was a different one. After hours of trying new things i found that putting the memory in slot 2 on the motherboard solved the problem, windows installed and booted up as norm. When i moved the memory back to slot 1 the computer would not boot.
I have now left the memory in slot 2 but the computer will still crash every hour.
I am sure this is something to do with the memory but not sure what the problem is.
Can anyone help.

Can anybody tell me what i should set the cpu fsb frequency to in the bios.
I just read this in the faq
What is the fsb speed of this cpu?
Depending on which FSB you are asking about: The Athlon 64's have the memory controller built in (which was previously part of the Northbridge on the motherboard) which uses up to 200MHz DDR Memory (400MHz FSB) The HyperTransport link from the CPU to the rest of the motherboard runs up to 800MHz. Just to expand on my answer... The HT link is 800MHz, but it's 16 bit in size (2 bytes worth of data per clock) the total bandwidth of the HyperTransport link is 3.2GB in total - 1.6GB sending data to CPU and 1.6GB receiving data from CPU.

Msi K8N Neo - IDE Problem! :(

Hey All
Specs Below.
I just bought a Seagate Barracuda 7200.7 200GB IDE Popped it in. using the 1.4 bios btw, and the hard drive detections is taking for ever!!!
What sall i do!? I tried changing it from Pri to Sec but still it takes ages to detect!! .. and i didnt wait for it to detect i just jacked it out
Help!!!!??? PLEASE!!!

i want to ask what means,when i install windows on my MSI k8n neo plat.,a64 3000,wd caviar sata 120,these words appears:IRQL_NOT_LESS_OR_EQUAL.there are others things but this mostly(others as MEMORY_MANAGEMENT,POWER_SUPPLY_ERROR and others that i dont remind)........what means that irql ..i know perhaps what is irq but this irql_not_less_or_equal is unknown for me now....
help me someone

MSI K8N Neo 4f problems please help.

My rig
Processor
AMD Althon64 3000+ Venice
Mainboard
MSI Neo4f
Graphics Card
Leadtek GF6600GT Extreme 128mb
Memory
2x512 Twinmos ddr400
Display
Viewsonic VX912
Storage
Hitachi 250GB SATA
Optical Storage
MSI DVDRom/ LG 4163B DVDRW
Casing
Cheapo
PSU
Verudium Vortex 430w
Audio
On Board
OS
Win XP SP1
The above rig bought 3 weeks ago,
and its been giving me unstability problems. After installing winxp SP1, when I start installing drivers, these problems would come.
1. PC would freeze up now and then.
2. USB keyboard and mouse sometimes wouldn't work after bootup although PC is still running
3. Blue screen! now and then.
4. Sometimes different software installation would give error but re-running the installation would be fine.
The above mentioned problems could is still persisting after 2 weeks. I've reformat and reinstalled winxp 4-5 times and the above would still occurs sometimes, even in the middle of installing drivers. It comes randomly and not during a specific software/driver installation.
I've run memtest and RTHBRIBL overnight with no errors and I'm suspecting motherboard. Strange thing is that the MSI live update program help me flash bios on my motherboard and would still prompt me I need to flash my bios everytime.
I've basically almost isolate everything except motherboard. I hope someone can help me determine if it is my motherboard problems. I've going crazy already.

Quote from: Tango on 14-August-05, 21:16:35
Do you have Cool n Quiet enabled?
If so disable it , and report back.
Verudium Vortex 430w
Please post the voltage rail ratings.
Have you tried Prime95?
http://www.mersenne.org/freesoft.htm
It is a stress test that runs under windows and also can be used to test your memory.
EDIT: http://www.alevtav.com/products.php?brand=1&ATSid=4a2fe5368de8eb29c5723c93b90aec9f
If that is your PSU it is fine.
What nforce drivers are you using?
yes thats the vortex i have
cool and quiet disable thru bios
nforce drivers. seems to have more problems with the newer downloaded from MSI website. but can't really confirm
I've download prime 95 but I did not run it because by running RTHBTIBL will cause my cpu temp to go to 47 deg c. But I'll try it tonight.
note that I'm not running raid. just a 250gb SATA hitachi HD.

Kingmax Hardcore 4000 on MSI K8N Neo Platinum Problem

I am currently running a A64 3000+ on this board with 512MB of Kingmax Hardcore PC4000. When I have the stick in the first ram slot it will error out in memtest, but if I place it in ram slot 2 or 3 it works perfectly and passes memtest. I've seen other people running this ram on this board and I am wondering if my board is bad or if this is just some weird ram incomptability. I wouldn't mind this so much if I was just going to have the one stick but I am eventually going to get another stick of this and go up to 1GB. Any comments would be nice.

Some sticks were tested and passed by MSI to run in certain DIMM slots. I just got back from MSI's Test Report section for the K8N Neo2 socket 939 board, and in the memory section - they have a list of all kinds of memory that worked, and which slots it worked and passed in....you might want to check it out for your mobo!!!

MOVED: MSI K8N Neo-F problem with Maxtor DiamondMax plus 9 slave.

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=95536.0

it has a 150gb FAT32 partition and a 100gb NTFS one.
Old mobo was a FIC AN11, but that is probably erroneous now.
As for the motherboard not recognizing it, the ide cable was loose. after fixing that, it is detected fine in bios.
And computer management now shows "Online" for the drive after I initialized it, but still shows unallocated under it. It is not unallocated.
Anything I can do to ensure I don't lose information?

Problems with 64 3200+ on MSI k8n neo platinum.

AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
Okey here it comes..
I installed everything and all seemed to work okey, until i threw in the XP install cd and began my install..
in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and the install moves on, this accurs 4-5 times and then it gives me a BIG "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
changed hdd, change gfx-card. change psu, removed all no-need pci-cards..
but still same error, i aint no expert so i might have missed something in bios or something :(
please help me if you can..

Flashing bios with memory errors is a veeeeery bad idea .
Almost guarantied to ruin your bios chip with bad data block.
That this even is suggested with mem errors , well .
You need to resolve the mem errors before doing anything else.
The windows xp install routine is a very heavy user of cpu and memory
and will fail if you have mem errors like you have.
Some things to try is entering bios and change auto settings on cpu voltage
giving it 0.5v more than default .
Set the memorys voltage to vendors max approved voltage
which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
Disconnect all devices not needed for a windows install ,things can be added later.
Have only the hd that os is to be installed to , one cdrom , floppy , memory and
gfx card .
Disconnect USB case front connector (cause corruption and strange faults if
USBOC pin is connected)

MSI K8N NEO Platinum Edition PROBLEM

Hi (my english is not good sorry for that)
I just got my new computer:
MSI K8N NEO Platinum Edition
AMD Athlon64 3200+
Western Digital Caviar 160Gb
PNY Verto GeForce 6800Ultra 256Mb
1GB Value Select pc3200
Levicom 500W
The Problem is that when i start the computer, it boot and die directly no bootscreen what so ever, it boot and die. i dont know what to do plz help me

Make sure you have Both the ATX Wires on.. theres the Big one! (21Pins i think).. and the Small 4Pin Connector both need to be connected.. if you havent done so yet.. Another thing you could do is Take everything out and place it on a cardboard or something appropriate for the mobo.... I think your motherboard is shorting?.. if it's touching your case.. I had somewhat the same issue long time ago.. give it a try..if you want hope it helps..

MSI K8N Neo Platinum & Crucial Ballistix 512MB RAM Problem

I have had MSI K8N Neo Platinum and 1x Crucial Ballistix 512MB RAM for 11 months.
I have had 1x Crucial Ballistix 512MB RAM for 2.5 months, for a total of two.
I have had MSI GeForce 6600GT (NX6600GT-VTD) 128MB AGP for 1 month.
For about 1.5 to 2 weeks, I have been seeing random crashes while playing PC games.
I started a thread on the Hard OCP forums a few days ago. I did not know MSI had forums =)
Rather than re-typing, I may as well just post the link:
http://www.hardforum.com/showthread.php?t=934956
My issue is also similar to this one:
https://forum-en.msi.com/index.php?topic=83799.0
Thanks for the help.

ALL RIGHT, after almost FOUR months my issue is FINALLY resolved.
It is amazing how much time passes when you are hesitant to buy parts unless you are 95% sure it will fix the problem.
OK, here is an update as to what I remember.
I went to BIOS 1.4 and tried many different physical and BIOS RAM configurations (Different seating, different number of DIMMs, different RAM timings, voltages, etc).
I concluded that I could not make my PC 100% stable, but I could get it darn close. With certain settings, such as DDR400, 2-2-2-6, 1T, 2.80V, Aggressive Timing enabled, Memtest failed test #5 every time (this is spec for my RAM). With other settings, such as DDR333, 2.5-3-3-7, 2T, Auto V, Aggressive Timing enabled, Memtest failed test #5 maybe once out of 5000.
I also concluded that the RAM voltage and Aggressive Timing setting was having a big impact. Some settings would not work (failed Memtest) with RAM at 2.80V but would work with RAM at Auto V. Some settings would not work (failed Memtest) with Aggressive Timing enabled but would work with it disabled.
Finally, I started to occasionally get R,G,R,G (Processor Initialization) on the D-Bracket upon cold-start & warm-start, which suggests a PSU issue:
https://forum-en.msi.com/index.php?topic=76972.msg542545#msg542545
That pushed me over the top, and I decided to buy a new PSU (TG-480-U22) and a new SATA HDD (WD2500KS) just because.
Problem solved. Thanks for all the help.
I will continue to buy MSI in the future just because of these forums…and a good product of course!

Msi k8n neo platinum ps2 keyboard problem

Hi. I'm having issues with my msi k8n neo platinum motherboard. I've read about 50 posts on these forums regarding the supposed ps2 keyboard issues with recent msi boards. However none of them seems to address my current situation.
Like many others, when I power up my system the cpu fan spins for like 3 seconds then everything comes to a halt.
I tried many things to get my system to boot and the only thing that works is plugging my ps2 keyboard into the ps2 mouse port and moving the ps2 mouse into a usb port with an adapter.
It seems there's no hope for fixing the problem other than RMA'ing, but I thought I would add to the pile of complaints stacking up against the MSI boards.

if u had read the threads a little more u might have found a solution that seems to have worked 4 many - a usb keyboard usb Keyboard if u go this route dont forget to enable usb kb in bios
Edit: This Thread Summarises the situation PS2 keyboard/mouse causes random shutdowns or doesnt work

MSI K8N NEO PLATINUM (RAM/HD problem/mobo problem?) [SOLVED]

my setup:
windows xp pro sp2
amd athlon 64 3200+
msi k8n neo plat - 7030 - bios 2.1
x800 xt vid
sound blaster audigy 2
kingston valueram pc3200 2x512 cas 3-3-3-8
ps = antec 430 watt truepower power supply (20 A on 12V)
I dont know if you guys remember my but i created a topic on here a while back about how my keyboard and mouse suddenly stopped working, well that turned out to be that the msi k8n neo platinum just went bad. So i RMA'd it and recently got the replacement board (with latest bios already installed). It worked completely fine for about a day. Well that same day i got it back, i installed a Logitech G7 USB wireless mouse. after i installed it, i began getting numerous windows stop blue screen errrors, even after i removed the mouse from control panel. So i figured i should format because to rule out everything and start fresh. So i did a FULL format and attempted the reinstall windows again. AFTER the format and BEFORE windows attempted the continue installation, i got the same stop error. I figured now this was a hardware problem. So first i tested RAM. I got the latest version of memtest86 and let it run for 4 hours (11 passes) with NO errors at all. Secondly, i got a western digital hard drive diagnostic program to test for failing hard drive and again no problems with that. I still suspected ram so i tried to boot with only 1 stick installed (in first slot), however the PC didnt boot at all (cleared cmos too). So i moved it to the second slot and cleared cmos again and this time it posted but it just hangs at a cursor and does nothing, same thing happened with third slot. I tried this same procedure clearning cmos each time with the second ram stick and got the SAME results. Shouldnt the motherboard boot with only 1 ram stick installed? Did MSI RMA me another bad board? Any help would be appreciated. thanks.

Quote from: russellmrgn on 28-March-06, 10:54:39
Sap147
Can you give us what the D-Bracket was showing ie
R R
G R
As an example this means "Initializing Keyboard Controller"
You will find this information in the manual page 2-23. (On mine) under Hardware Setup
Also can you please do all your tests with the ps2 keyboard and mouse and for now leave your Logitech G7 USB wireless mouse to one side.
Russell
for two sticks of ram = RR
GG
for one stick of ram = GR
GG
as for the g7, it hasnt been plugged in at all, i took it out long ago.. as for the ram, the timing was set to 2T, no overclocking, i will try 2.7 v and let you know, but for the record, it has been running at normal voltage settings for about a year perfectly fine.

MSI K8N Neo Platinum with Vapochill Case problems - Help anyone. :)

Hi all,
Had a bit of a tricky problem and as Im new to this board I have no idea what could be causing this.
First all all system specs:
Athlon 64 3700+ Clawhammer
MSI K8N Neo Platinum -
1 gig Corsair XMS ProL Low Latency Ram (2 x 512mb)
Nvidia Gefore 6600GT
1 x WD Raptor 10000rpm HD
NEC 2500a DVD writer.
Eye-T 550w PSU.
Vapochill SE Case with installed Vapochill Phase change cooling.
Here are photos of it in its present state, you will notice that it isnt installed in the case at the moment.
The reason for that is because the two wont work together and I want them to so so bad...
So, hopefully someone here can save the day for me - here goes.
I have tested the Motherboard and all other componants outside of the case and everything runs smoothly and there are no problems what so ever, great.
I have also retested the Vapochill case with another motherboard and that also works without a hitch.
The problem comes when I insall the MSI board into the system, all hooked with a really basic setup, PSU, Case cooling, CPU and Ram. Flick the on switch on the power suply and the system turns on for around 1/2 a second then turns off again. I found this strange because it soundnt come on at all until I press the power button.
If I press the power button the same thing will happen over and over.
I have tried a different powersupply and this does nothing at all.
I have checked for shorts and there is no possible way it is shorting on anything.
I have a fan plugged in where the CPU fan would go and this doesnt help.
I have taken it back out and tested it again and it still works ok.
Does this sound familiar to anyone? Are there any secret Bio's menu's that would have an option that would solve this?
Any help would be greatly appreciated.
Glenn

When you are running the MoBo standalone, what are you connecting to the Power, Reset, HDD, etc. pins ? Are you using the wires from the Vapochill case, or something else ? It looks like a single cable with an intermittent switch (red/white cable). I once had a similar sort of problem and it was because I hadn't connected up (the incredibly fiddly) cables correctly. Other than that, I would have gone for a short of some sort - but you have checked that already, so . . . .
As to the system starting to power-up when you switch on the PSU, I wouldn't worry too much about this. It seems to happen from time to time with some of my systems - amongst other things, the BIOS can be set to resume to previous state after a power-fail.

MSI K8N Neo 2 Multiplier Problems

Check this out:
Sudhian has found problems with the MSI K8N Neo 2 clock settings that have caused memory problems for them.
http://www.sudhian.com/showdocs.cfm?aid=616

this has already been shot down..
Upsetting information

Msi k8n neo plat and audio problem

got me a msi k8n neo plat, great board but have a few minor problems that i have noticed. one is the audio problem i have- when i listen to winamp, and surf, i will loose my winamp connection surfing, and then have to start winamp. is this a bios thing, or nvidia platform or chipset problem?

Hi
Thats the Nvidea board, this is the via board forum. You want forum below this one, as they will be able to help better.
good luck
jocko

MOVED: MSI K8N Neo 2 Platinum Problem

This topic has been moved to Overclockers & Modding Corner.
MSI K8N Neo 2 Platinum Problem

A lot of things could be wrong but it will be easier to figure out if we know what you did. When you say you changed settings in Bios, do you remember your last settings and what you did?
It might be helpful if you created a sig (as described in the forum rules) to show what you have in your system like my sig below. (Hint- use profile button in sign on screen.)
Things could be broken even if there is no visible evidence (such as flames or melted component) of course.
If I had to guess and your d-bracket reading is correct, corrupted bios requiring new bios chip, but let's not guess as a lot of things could be wrong and you don't want to invest in a new bios chip if the board cannot be brought back to life. Consider removing parts and testing them in an other machine. Start with CPU and memory?
Good luck.

MSI K8N Neo XP Problems

Similar Messages

Maybe you are looking for