MSI K8N Neo2, can't install Windows

MSI K8N Neo2
Amd 64 3500+
Ocz 3700 EB 512Mb x 2 / Corsair pc4400 512Mb x 2
DDR Booster
Radeon 9600XT / GeForce Ti 4200
Audigy 2
IBM Deskstar 40Gb (My raptor is on rma r&r)
Psu Enermax 460w
The system is watercooled.
My Windows got bad after SP2 was installed so I went to reinstall Windows...
When I try to install Windows XP Pro I get Blue Screen/system freeze/black screen.
This happens soon as the cd starts to read the files/installing files after format.
I haven't been able at all to install Windows successfully (I don't even get to windows).
My system is listed above and as you can see I have tried with 2 different graphic cards, 2 different rams and with/without the booster, with/without the soundcard, 3 different dvdplayers and 3 different Windows XP Pro.
Och and yes I have tried the hardware (except mb & cpu, don't have another Amd 64 mb or cpu) in an another computer and they work fine.
Nothing works.
Could it be that the mb that is bad or?

Quote
Originally posted by kensterman
Is your CDROM drive okay? How about the XP CD itself? Either way, it sounds like it's bombing duing the reading/ copying of the files..
I have tried with 3 different dvdrom drives and 3 different XP cd's, results are the same.

Similar Messages

Flashing bios of k8n neo2 plat without installing windows?

hi
my k8n neo2 arrives tomorrow to replace an asus a8v which is causing me problems with my x2 4400 and dsp cards (uad-1 and poco mk2).
with the asus i could use "ez flash" and put a floppy (or cd) with the bios and press a button and the bios would flash.
does the k8n neo2 have a similar function. i have skimmed through the manual pdf but can't see a reference to this way of updating the bios.
or do i have to install windows and then the bios update. the reason i ask is because it is only the latest bios that recognises the dual-core and so if i installed windows, the hal wouldn't be multi-processor therefore only one core would be recognised and i'd have to install windows xp pro over again.
thanks very much in advance for any help.

Quote from: captain caveman on 30-September-05, 02:27:52
wow!
thanks for the quick replies richard and syar, appreciated man.
can i do this with a cd-rom instead of floppy?
1. download the bios file and flash tool.
Unzip them if zipped and have them ready to copy to the cd image.
2. Goto
http://www.bootdisk.com/
Down on the page you find a subtilte called "Bootable CD"
Download flashcd.zip and read the userguide thouroghly.
Direct link to flashcd : http://www.bootdisk.com/kentucky/flashcd.zip
3. Download and install UltraISO from http://www.ezbsystems.com
4. Start UltraISO and follow the instructions from flashcd's readme :
File | Open | Select flashcd.iso | Open | Image windows shows bootable |
Select your bios files in the lower window | Drag to the top window | File |
Save.
To burn:
File | Open | Click on flashcd.iso | Open | You'll see your bios flash
files on the right | Tools | Burn
Then you have a bootable cd with biosfiles
Remember that the bios files will be on drive R:> after booting the cd.
When the cd has loaded on the dos prompt write R: followed by enter
Then write the AWFLxxx biosfile string like you do from a floppy boot

MSI B85M-G43 can't install Windows 7. Hard disk not detected.

Hi,
I just built a new computer for the first time. I followed the instructions and did everything correctly. but am unable to install Windows 7 Ultimate 64bit. Hard disk isn't always detected during the installation.
But when it appeared in the "Where do you want to install Windows" list along with system, I tried to format the hard disk and got a message "Failed to format the select partition. [Error 0x80070057]."
Then I restarted the computer, the hard disk no longer displayed in the list, so I put motherboard driver disc and clicked on Load Driver and opened Storage\Intel\PCH_12.0\f6flpy-x64. It loaded, then I got a message saying "To continue installation, use the Load Driver option to install 32-bit and signed 64-bit drivers. Installing an unsigned 64-bit device driver is not supported and might result in an unusable Windows installation."
I restarted again and disabled Driver Signature Enforcement, but it didn't help. I still got the same message.
In the computer case I have these devices:
- MSI B85M-G43, Socket-1150
- Intel Core i5-4430 Processor
- Corsair Vengeance DDR3 1600MHz 8GB
- MSI GeForce GTX 650Ti BOOST 1GB
- Cooler Master GX 550W PSU
- WD Desktop Green 1TB
- SuperMulti 16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive
Everything is plugged in correctly. Hard disk connector plugged in SATA 1 and DVD -> SATA 2.
The installation is pretty slow, regardless if i install it via USB or x16 DVD. All except DVD and hard disk are disabled. It's also worth to mention that even DVD and USB aren't always detected in the click BIOS.
So I'm wondering if anyone here can help me? Thanks

Hi and
1: What BIOS version you have? .. Have you tryed to downgrade/upgrade it already?
2: Have you tryed it in those SATA 2 ports? ...is it same strory?
- On SATA there aint any master or Slave like on IDE so if you are under same controller it dosent mutter what port you use on what device.
Note: SATA 3 Ports are faster then SATA2 ports, but even SATA 1 can handel your DVD or HDD. So no lose if you need to use SATA 2 ports.
Hope this get you foward! Cheers Mummy

MSI Z77A-G45 can't install window 7 by raid 0

I have a rig which:
CPU: Core i7 3770k
HDD: Two Western Digital 1 TB 7200
Main: MSI Z77A-G45
Power supply: 700W
Ram: 32GB DDR3 1333 MHz
*** VGA card: MSI Geforce nVidia GTX 660 Ti 3GBDDR5 TF
After configuring BIOS to setup RAID 0, I was trying to install Window 7 on my 1.8TB ( which was summed of two HDD )
But I got a problem about couldn't install the O.S on.
***And about the VGA, whenever I plug it in my mobo, my monitor shows black screen as it doesn't recognize the VGA card. What happen if I install window then add the VGA card later? Will it affect on my system later?
And what should I do to install RAID 0 with my stuff? I appreciate all supports.
Thank for read and answer my topic!

The 660ti will require a bios update to use most likely.
Is the system stable enough to flash? The forum flash tool included memtest, run this an so long as no errors or crashes, go ahead a flash to the most recent bios.
>>MSI Downloads<< For full release
or
>>Beta BIOSes<<
>>Use the MSI HQ Forum USB flasher<<
Make sure in you next post to include more detail on the raid set up error. What error? When did it fail?

MSI K8N Neo2 Platinum and installing XP on WD 1TB Caviar Black SATA-II HDD...

I haven't flashed my BIOS ever. So some will be glad to hear that since I never needed to--but I think I might have to now.
My comp crashed (just made a very long story short ), so I bought a new HDD and it's the one described in the title. It's "SATA-II" as the misnomer goes but when I installed windows on it things seemed to go just fine (at least it didn't give me any errors)--indicating the mobo didn't have any trouble allowing to install (if it has anything to do with the install in the first place). And that was without a jumper to make it go to 150 mb/s (the HDD was OEM and didn't come with one :()
When I went to booted up again after installing, I received the renowned "Error loading operating system" message.
So! I figure I need to update the BIOS so it can better interface with the new HDD. Is that a correct assumption or could my error be due to something else (like the jumper)?
Thanks for any help!
EDIT: Forgot to mention that I already had/have a SATA-II drive (300 mb/s one) installed and working just fine, recognized by windows, before the crash...but it wasn't the boot drive...so maybe that makes a difference?
EDIT 2: I tried to use the BIOS util provided on these forums but I can't use it since I have no working install on the windows drive for my PC. I'll look on the other forum page for a way to make a USB BIOS flasher on an independent computer, but if you have the link for me, that'd be even better. If I find it soon, I'll edit this out. Thanks.
EDIT 3: Eh, so it looks like it just needed a good restart...everythings fine--no flashing needed. Woohoo!

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

MSI Media Live: can't install Windows 7

Hello,
I'm not able to install win 7 :(
Installation always crash during "unpacking windows files" I try install from DVD, from USB, with monitor connected via HDMI or D-SUB (https://forum-en.msi.com/index.php?topic=127670.0)
with bios version 1.5 or 1.63... it is still the same. What the heck can be the problem???
Anybody any idea?
Thanks!

Topic split. What hardware have you installed in your Media Live?
>>Posting Guide<<
And describe the problem you have a little better please.

MSI K8N Neo2 Platinum cant upgrade to BIOS 1.4, Windows wont boot.

Hello
I have a MSI K8N Neo2 Platinum and I cant upgrade to BIOS 1.4. I have tried everything and cannot get Windows XP to boot with BIOS 1.4.
I have reset the BIOS, set defaults, cleared the battery etc but when I load BIOS 1.4 (from a 98SE an ME boot dish and even from the Live Update?
The only solution is to rebuild Windows after loading BIOS 1.4???
Help

Hi !
Well, I have that problem, too. I think the reason is a new RAID-BIOS-Version built in the BIOS-Update. I´ve tried the beta-versions V1.51 and V1.5X, too - but they won´t run anyway.
My WinXp hangs while booting (before the WINDOWS-XP-Logo appears, or while fading in...). I cannot reinstall Windows completely because, when I install the 2 raid-drivers, the installation routine hangs before the licensetext - when I don´t install the drivers i cannont install on the raid-drive (beacuase the installation routine shows 2 hdds).
I think, a new driver will solve this problem, but I don´t know where to find it....
A.

Can I put a amd 64 X2 3800+ on a motherboard msi K8N neo2 platinium ?

hello
I'm sorry for my bad english but I'm french ....
can I put a amd 64 X2 (dual core) 3800+ on a motherboard msi K8N neo2 platinium ?
Which is the highest processor which I can put on this mothercard ?
thanks well for your help
@+

I'm sorry but I dont find the info on the msi website. I listened it ! but I don't know the adress that you give me.
thanks well for the adress :
but I don't know if it's e4 or e6 or manchester .... if you help me for that proc :
http://cgi.ebay.fr/processeur-AMD-Athlon-64-X2-dual-core-3800-socket-939_W0QQitemZ290129683087QQihZ019QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and that : http://cgi.ebay.fr/AMD-Athlon-64-X2-4800-socket-939_W0QQitemZ190124445607QQihZ009QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
and that :
http://cgi.ebay.fr/AMD-ATHLON-64-X2-4200-4-4-GHZ-1MB-CACHE-939-DUAL-CORE_W0QQitemZ270133637708QQihZ017QQcategoryZ80141QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I don't want to make a error ....
thanks very well for your help
@+

MSI K8N Neo2 Platinum slows down

Hi,
I have a little problem with my new K8N Neo2 Platinum. I installed Windows XP and the newest nForce drivers but if I copy files over LAN (tested both LAN-Ports) or install big applications my music played with winamp slows down. It's played with half speed. In addition to that my mouse pointer is very slow. After the setup or copying files everything is how it should be again. How can I solve this problem?
My system:
AMD Athlon64 3500+ (Winchester)
MSI K8N Neo2 Platinum-54G (tried different bios releases)
1024MB Corsair XMS Twinx DDR500
ATi Radeon 9800 Pro
2 80GB Maxtor S-ATA (DMA Mode enabled)
Creative Labs SoundBlaster Live! Player 5.1
MorLipf

Hello,
I copy files to my bro sometimes, 5Gb - all the steam GCF files for CS/HL/CSS/HL2.
My network usage is 80%-92%
My CPU usage is always under 15%.
It is worse when using 512Mb but as you have 1Gb it shouldn't be bad.
Check in the device manager, your cd drives should be set to DMA mode.

Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
Here are the details of my system:
MSI K8N Neo2 Platinum (BIOS 1.B)
Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
Asus Radeon AX800 Pro (256 MB)
PSU Antec Sonata 380W
HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
HDD Seagate 250Gb SATA (ST3200822AS)
HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
BenQ DW1640 DVD-Writer ATA (Sec Slave)
P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

News - BIG PROBLEM - MSI K8N Neo2 Platinum - DOES NOT POWER!!!

Hi to everyone.
I'm a proudly owner of a MSI K8N Neo2 Platinum that in one year gave me no problem until yesterday morning.
I used the computer in the night before and when I finished I turned it off and I went to bed.
Yesterday morning I found the power led blinking (like if the system was in standby), and there was no way to turn the PC on.
I even took off the battery for more than 12 hours and I left only minimal components installed:
the video card (Gainward GeForce 6800),
the psu (Antec TruePower 550W),
1 x 512 MB Ram Crucial Ballistix,
and I checked them into another computer and they work perfectly.
I tried shorting the MB power switch pins with a screwdriver and I've even tried to power on the system without the Memory or the Video Card... I've tried everything that came across my mind with no efforts!!!!
Every time I give power to the MB appens only that the power led starts blinking, but pressing the button the PC doesn't turn on.
PLEASE HELP ME... I really don't know what else to do!!!
Thanks,
Alberto

Quote from: alberto_melita on 20-August-05, 20:14:56
Hi thanks for the answers.
I do have a D-Bracket, but my problem is not that the system does not boot or does not post... my system DOES NOT POWER ON (!!!!), so d-bracket is useless!
When I plug the system power the only thing that happens is that the power led starts blinking (with the system still in soft-off), and if I press the power switch button nothing happens!
I've the bios for 7025 v1.8 and the settings where for OFF on power-loss ond pressing the button (can't rememeber if it was more than 4 sec) was meant to turn off the computer, but considering that I un-powered the pc more than once without the MB battery the settings should be factory default by now.
I went through the Windows-XP shut-down system, and i could not be an electrical problem as I always used the PC with a pretty good UPS unit.
Right now these are the full specs of my sytem:
- MB MSI K8N Neo2 Platinum nForce3 Ultra
- GAINWARD 6800 2600 GLH 256 MB Ram
- PSU Antec TruPower 550 W
- CPU AMD64 3500+ core Winchester @11*210 Mhz (this cpu has never overclocked very well)
- HEATSINK Thermalright XP-90 with a 12 Cm Enermax Fan (CPU temp in always below 55 °C when stressed)
- 1 x 512 Mb RAM Crucial Ballistix DDR400 optimized for MSI K8N Neo2 Platinum
I left only these things inside my computer in the hope that it would turn on... it did not work. I tested each component but the MB, and they work perfectly.
Again...
Thanks for you efforts, any help will be appreciated.
Alberto.
All parts have been tested: CPU/RAM/GFX/PSU/HD/DVD, just not the MOBO ?
Checked if the MOBO is shorting in the case ?
Have you tried using the reset switch as power, on/off switch ? I've seen before when the power switch stops working (lose/bad wire busted spring) after swapping reset to power, then the system turned on. Worth a try, as sending it back to USA won't be cheap. If its over 1 year old it mite not be covered by the re-seller and or MSI. Best to check this out as law and warranty is different from country to country.
Good Luck

Msi k8n neo2 54g platium problem

Hello again i foudn how to raid them, and now i got a new problem.
When i connect all my hdd's the computer goes blank in the winxp startup installation, just before i get to chose where to install winxp pro, i stoppes to respond, and that is when i load both driver's on the diskette, the raid and the storage driver that is, hope you guy's can help.
this is my sytem.
Msi K8n Neo2 54g Platium
Amd 64Bit 3500+
1024 Mb Geil Pc 4400
2*160 Gb sata Seagate
1*250 Gb sata Wd
1*120 Gb ide Maxtor
1*120 Gb ide Seagate
sony Dvd burner
before they werent raid'ed and every thing was ok, now i raid those 2 160gb seagate, and when all is connected, it stoppes to respond.

Don't know if this helps, but your getting it anyway
When installing windows don't have any Hard drives in front of your raid array, assuming that's where your putting your OS . Unplug them whilst windows is installed. This is due to the fact that windows places %systemdrive% as the first drive it sees (e.g 1'st master) , meaning it will be C: and hosts the os boot files .
(Taken from Syar2003)
Therefore if installing your raid on Sata 3/4 unplug all IDE Hard Drives plus SATA 2/3.
Once windows is installed Plug 'em all back in
Luck

MSI K8N Neo2 Platinum; ethernet probs!?

Hey guys,
I'm having problems getting my DSL hooked up to my new PC. I'm using a MSI K8N Neo2 Platinum, and according to my ISP phone-tech, the problem is with my "NIC".??
When examining the back of the PC, the slot where my ethernet cord is connected is green accompanied by yellow blinking. All lights on the Speedstream 5100 modem itself are green... No probs in the device manager... Switched ethernet cable from top to bottom port... Flahsed/Updated my BIOS from ver1.5 to ver1.8... Still have blinking yellow light... unable to connect to the internet on my new PC.
(Blinking light appears on both (top & bottom) ethernet ports when i have it plugged in)
Can someone point me in the direction of what to do / which drivers i need to install/uninstall...!?
Need help... Any is welcome.
The PC: Athlon 3500+ / 1 GB RAM / 80GB SATA WD / 250 GB 16M Cache IDE Maxtor / Geforce 6800GT / MSI K8N Nforce 2 Platinum

Doh, i seem to have taken a few step backwards...!
I returned the modem for another (brand = 2-wire gateway)... Still unable to connect; problems are similar, but let me tell you....
I have uninstalled all nvidia drivers --- went back to the drivers on CD. In Device Manager all devices are OK. I have both the nvidia LAN & MAC LAN ports enabled. Everything seems to be default settings (exception: i disabled windows firewall). Also I did not install nvidia FIREWALL option during install.
I plug in new modem... it boots, but middle light (broadband link light) is solid orange. According to the 2-wire site/faq
--- Broadband Link light ---
Solid orange - The HomePortal has established a physical broadband connection but was not able to successfully connect to your Internet Service Provider, or has not yet been configured. (can't PPPoE login. Username/Password failure or the other end is fubared.)
With this set-up; i am unable to run REPAIR on nvidia LAN connection (unable to restore IP); under the nvidia connection details: packets are being sent, but none recieved...
Ok, now get this.... I plug ethernet cord into the MAC LAN port; go to Network Connections; packets are being sent/recieved //// I am able to repair the connection.... yet the broadband link light = solid orange still!!
Next, I use the USB connection for the new modem, it asks for software/drivers... place install CD in... all lights = green... I AM able to connect!!!!!!!
probably, problem was i didn't load software from CD with the ethernet connection goin... !? (me = idiot !)
I'm gonna reinstall WinXP now... and hope to duplicate results, but on the ethernet wire (running SBC software)... if all else fails, i'll just prob set up the USB set-up..!
Thanks for your patience fellas...

MSI K8N NEO2 + wd raptor 36gb??

Can you install windows XP on a wd raptor 10K sata 36gb with a MSI k8n neo2 nforce3?
and btw.. whata heck is raid?? im soo confused that I might go and bath in the icey sea brrrr
thx for any help =)

You don't need to configure it as a RAID, use this procedure:
- Have only the SATA drive you want to be the boot drive in your system. Disconnect the power to all other HDD's if any.
- Have only one optical drive. Disconnect the power to the other optical if any.
- Plug SATA drive into SATA 1 (it may show us as an IDE drive somewhere down the list in BIOS. That's okl)
- Enable appropriate SATA options in BIOS. Set boot order to floppy, cd, SATA drive. Set boot priority to SATA drive.
- Partition and format using the utilites CD that came with the SATA drive.
- Run Windows setup. No need to do the F6 thing unless you are planning to do a RAID configuration.
- Windows should install just fine
- After you are up and running, plug power back into your other drives if any.
I hope this works for you.

MSI K8N Neo2 Plat. + Audigy2 woes

Hi.
I'm getting the dreaded Machine Check Exception(0000009c) on my rig and it seems no amount of tinkering can get this combo to play nicely, and as I know there are quite a few more of you with the same problem out there(and a lot who DON'T have this problem) I thought it could be interesting to find out a bit more about this.
My box:
A64 3500+(newcastle)
MSI K8N Neo2 Platinum
2x512Mb (Kingston HyperX PC3000...old stuff from my KT333-mobo)
Audigy 2 (SB0240)
HIS 9800Pro Ice-Q
+other stuff that doesn't affect the problem
Running WindowsXP SP2
I've tried diff bioses (1.2,1.3,1.4b1), I've tried tweaking the pci-latency of the audigy(raising from 32 in steps of 8 to 96) with powerstrip. Tried moving the card to all available pci-slots(the audigy is the ONLY pci-card in my rig, its just the audigy and my 9800 in its agp-slot).
Tried all different driver revs for the audigy, from the one on the included cd up to the latest. Tried changing that pci-clock setting in the bios(hidden setting), to no avail.
I've run memtest86+,windows memory diagnostics and prime95 as well as a few other diagnostic tools from the UBCD for hours on end without any problems whatsoever.(at first I was inclined to believe that the psu might have something to do with this, but I don't believe that anymore, the problem seems to happen to people no matter WHAT psu they use.)
Facts:
1. With the audigy2 in place my machine WILL freeze with the 0000009c-error sooner or later(might take hours, might happen in 5 minutes). It does however seem to be related to using the soundcard(just sitting in windows without using the soundcard for ANY sounds keeps the box alive a lot longer than playing BF1942 and using teamspeak)
2. When I remove the Audigy2 from my system and use the on-board sound the lock-ups stop, no more machine check exceptions.(this isn't a solution, its a workaround)
3. Some people have the same problem while other people seem to be able to use audigys in their machines.
My guess is that it might be related to what model/version of audigy one has, that earlier audigy/audigy2-cards wont work properly...
So, those of you that have the problem, what model/ver of audigy/audigy2 do you have?
Mine is a SB0240.(random 0000009C-errors)

Quote
Originally posted by MonarchX
How do you know if its the SB0240 or SB0350?
Model number on the box or the white sticker on top of the card.
Same card here Audigy2 (SB0240).
I don't remember the error message I got but it was something about a conflict with the nVidia RAID controller. It was right after updating the Creative drivers so I immediatly removed ALL Creative startup programs and services with msconfig. No more problems. It runs great. There is the occassional rare "burp" through the speakers but its no problem.
In "msconfig" uncheck the following under the "Startup" tab.
CTCMSgo
CTDVDDet
CTHelper
CTsysVol
SBDrvDet
regsvr32 (no problem so far with unchecking this one. I noticed there's a copy of it in one of the Creative folders. regsvr32.exe is a command line program used to register and unregister object linking and embedding (OLE) controls such as dynamic-link library (DLL) or ActiveX Controls (OCX) files that are self-registerable. This may be necessary to troubleshoot some issues with Windows, Microsoft Internet Explorer, or other programs.
Attention the same filename is used by some spyware programs.)
In fact the only startups I've left running in msconfig are...
nvraidservice
NvCpl
zlclient (ZoneAlarm)
Next click the "Services" tab in msconfig - check "Hide All Microsoft Services" and uncheck "Creative Service for CD-Rom access".
I guess it should also be added that a couple of days ago my system became extremely sluggish and had difficulty starting up. There were a couple of BSOD's. Pressing on the back of the case near the PCI slots caused the lights to flicker. Uh-Oh! Apparently the Audigy2 card was a little loose in its slot. Reseating the card seems to have solved that problem.
Later, Conrad

MSI K8N Neo2, can't install Windows

Similar Messages

Maybe you are looking for