MSI K8N Neo2 Platinum (HELP!)

Hi
Ive just bought a MSI K8N Neo2 Platinum motherbaord. When i try to power my pc up nothing happends. All i get is the green power led flashing on my tower. I dont get any fans spining or any other action.
omg whats wrong..... plz help !

Well we now know the motherboard... what about the rest of the components in the computer. When including specs on the powersupplies (post both the 400w and the 480w) include max amps for the 3.3v 5v and 12v rails. This info can be found on a sticker on the side of the PSU.
Do you have the D-Bracket installed? If so where is it hanging at?
Good Luck
Jeremy

Similar Messages

MOVED: MSI K8N Neo2 Platinum (HELP!)

This topic has been moved to AMD64 nVidia Based board.
MSI K8N Neo2 Platinum (HELP!)

Well we now know the motherboard... what about the rest of the components in the computer. When including specs on the powersupplies (post both the 400w and the 480w) include max amps for the 3.3v 5v and 12v rails. This info can be found on a sticker on the side of the PSU.
Do you have the D-Bracket installed? If so where is it hanging at?
Good Luck
Jeremy

System suddenly won't power on (MSI K8N NEO2 PLATINUM NFORCE3)

System specs are
COOLERMASTER TAC-T01 WAVE MASTER ALUMINUM ATX 4X5.25 1X3.5 4X3.5INT case
MSI K8N NEO2 PLATINUM NFORCE3 ULTRA S939 AGP 5PCI SATA 1394 SOUND 1000LAN
KINGSTON HYPERX 1024MB DUAL CHANNEL KIT PC3500 2X512MB DDR 433MHZ 184PIN
ATI Radeon X800XT PE AGP
SEAGATE BARRACUDA 7200.7 200GB SATA 8MB 7200RPM 8.5MS OEM
CREATIVE SOUND BLASTER AUDIGY 2 ZS 7.1 1394 PCI RETAIL BOX
LITEON 16X DVD-ROM INT E-IDE RETAIl
MITSUMI FA404A 7-IN-1 FLOPPY DRIVE & FLASH READER CF/SM/SD/MMC/MS
LG 4163b dvd burner
Nothing has ever been overclocked on this system.
Everything is plugged into a Belkin Surgemaster powerbar.
I haven't mentioned the power supply. I'll get to that. I have been using an ANTEC NEOPOWER 480W POWER SUPPLY (ATX12V DUAL 12V RAILS ACTIVE PFC W/ DETACHABLE OUTPUT CABLES) for about a year on this system without
any issues. One morning, I wake up, hit the power button on my coolermaster case, and nothing happens.
CPU fan won't even spin. Nothing happens.
O.k., blown power supply, I think . . . .
So I take out my Antec and put it in another system. That system turns on
without any problems.
Hmm . . .
I come here, and I read posts about
potential compatibility issues with Antec power supplies. But if it's a compatibility
issue why was my system working for about a year?
O.k., fine. I'll buy a Enermax 535W EG565P-VE FMA 24P (115/230 VAC) power supply.
I just plug it into the mainboard (nothing else). Hit the power button . . .
The CPU fan spins for half a second, and then nothing.
Did my motherboard just suddenly die for no reason?
Any suggestions?

Pull the AC plug from PSU and set cmos in clear position with battery removed for atlest 20 minutes perhaps longer .
Then try to post the system barebone .
Just cpu,1 pcs memory in slot 1 , gfx card , and keyboard in PS2.
No usb devices at all including card reader and no pci cards harddisks or cdoms/dvd/floppy.
It could also be caused by a short or a malfunctioning fan connected to mobo.
Try to disconnect all case fans from mobo headers if you have any connected to additional fan holders.
The chipset fan can also be disconnected momentarily just to see if it posts.
If none of this helps , replace cmos battery and try again .

Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
Here are the details of my system:
MSI K8N Neo2 Platinum (BIOS 1.B)
Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
Asus Radeon AX800 Pro (256 MB)
PSU Antec Sonata 380W
HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
HDD Seagate 250Gb SATA (ST3200822AS)
HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
BenQ DW1640 DVD-Writer ATA (Sec Slave)
P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

MSI K8N Neo2 Platinum with Western Digital 750Gb Caviar Green 32mb

Hi all, this is my first post and im a bit of a numbskull when it comes to upgrading, thus this post.
My HDD is on its last legs and I want to get a Western Digital 750Gb Caviar Green 32mb. Im not sure weather it will work with my MSI K8N Neo2 Platinum (MS-7025). Can anyone help me out? If you have any suggestions for a better HDD to go for that would also be appreciated, Cheers

Burst speeds are high mainly because of the disk's cache. That's the only part of the HDD that can get near the maximum bandwdth of the controller.
The bottleneck for speed is in the fact that the HDD's mechanical properties won't allow it to work faster. With SSD's it is or will be different.
Back to topic: the WD Green is an excellent choice. I've 6 of those running here now, 5 in a NAS and 1 in my pc and they're simply good. Not the fastest, but very stable, quiet and fast enough.

MSI K8N Neo2 Platinum, Socket 939, nVIDIA nForce3 Ultra Chipset w/ 8X AGP (ATX)

MSI K8N Neo2 Platinum, Socket 939, nVIDIA® nForce3 Ultra Chipset w/ 8X AGP (ATX)
and a 3500 90 nm amd 64.........is this a god combo ......Im swicthing mine for this(just the cpu and mobo) opions?..........any help is welcome...Its in the name of gamging...

Quote from: duffyone on 31-March-05, 11:54:15
Now... don't LOL, but there is a reason I picked the 3200+ instead of the 3000+, but I can't remember why???
Probably because the 3000+ only has a 9x maximum multiplier, whereas the 3200+ will go to 10x.
2600MHz at 9x means a FSB of 289MHz and ram at 289MHz for best performance. Will your ram do 289MHz? Of course you *can* run your memory and fsb async, but I prefer not to.
Chip

News - BIG PROBLEM - MSI K8N Neo2 Platinum - DOES NOT POWER!!!

Hi to everyone.
I'm a proudly owner of a MSI K8N Neo2 Platinum that in one year gave me no problem until yesterday morning.
I used the computer in the night before and when I finished I turned it off and I went to bed.
Yesterday morning I found the power led blinking (like if the system was in standby), and there was no way to turn the PC on.
I even took off the battery for more than 12 hours and I left only minimal components installed:
the video card (Gainward GeForce 6800),
the psu (Antec TruePower 550W),
1 x 512 MB Ram Crucial Ballistix,
and I checked them into another computer and they work perfectly.
I tried shorting the MB power switch pins with a screwdriver and I've even tried to power on the system without the Memory or the Video Card... I've tried everything that came across my mind with no efforts!!!!
Every time I give power to the MB appens only that the power led starts blinking, but pressing the button the PC doesn't turn on.
PLEASE HELP ME... I really don't know what else to do!!!
Thanks,
Alberto

Quote from: alberto_melita on 20-August-05, 20:14:56
Hi thanks for the answers.
I do have a D-Bracket, but my problem is not that the system does not boot or does not post... my system DOES NOT POWER ON (!!!!), so d-bracket is useless!
When I plug the system power the only thing that happens is that the power led starts blinking (with the system still in soft-off), and if I press the power switch button nothing happens!
I've the bios for 7025 v1.8 and the settings where for OFF on power-loss ond pressing the button (can't rememeber if it was more than 4 sec) was meant to turn off the computer, but considering that I un-powered the pc more than once without the MB battery the settings should be factory default by now.
I went through the Windows-XP shut-down system, and i could not be an electrical problem as I always used the PC with a pretty good UPS unit.
Right now these are the full specs of my sytem:
- MB MSI K8N Neo2 Platinum nForce3 Ultra
- GAINWARD 6800 2600 GLH 256 MB Ram
- PSU Antec TruPower 550 W
- CPU AMD64 3500+ core Winchester @11*210 Mhz (this cpu has never overclocked very well)
- HEATSINK Thermalright XP-90 with a 12 Cm Enermax Fan (CPU temp in always below 55 °C when stressed)
- 1 x 512 Mb RAM Crucial Ballistix DDR400 optimized for MSI K8N Neo2 Platinum
I left only these things inside my computer in the hope that it would turn on... it did not work. I tested each component but the MB, and they work perfectly.
Again...
Thanks for you efforts, any help will be appreciated.
Alberto.
All parts have been tested: CPU/RAM/GFX/PSU/HD/DVD, just not the MOBO ?
Checked if the MOBO is shorting in the case ?
Have you tried using the reset switch as power, on/off switch ? I've seen before when the power switch stops working (lose/bad wire busted spring) after swapping reset to power, then the system turned on. Worth a try, as sending it back to USA won't be cheap. If its over 1 year old it mite not be covered by the re-seller and or MSI. Best to check this out as law and warranty is different from country to country.
Good Luck

MSI K8N Neo2 Platinum and Venice E6

Hi!
I have just bought an MSI K8N Neo2 Platinum motherboard and an AMD Athlon64 3000+ processor with Venice E6 core (ADA3000DAA4BW).
Will this mobo boot with that processor? Or do i have to use a Winchester to flash the BIOS first? Personal experiences would be helpful!
Andres.

Your new board probably came with the 1.9 bios. The new 7025v1B.zip bios (1B only a couple days old) I think is for some of the new X2 AMD Processors. The MSI link to Products/Mainboards/Neo2/Processor Compatibility is now setup to use the 7025v1B.zip bios. As I recall the previous Processor Compatibility Chart for 1.9 bios was OK for all the Venice cores (E6 or not). I think it is only some of the latest E6 bigger models are affected by the latest 1B bios. Maybe someone has the older 1.9 bios Processor Compatibility Chart.
You shouldn't need to use a Winchester, some X2 processors would be recognized as earlier X1 models until the newer bios was installed. I think you should be OK with the 1.9 bios. I have the San Diego 4000+ and my board, one month old, came with the 1.9 bios installed.

PS2 mouse with MSI K8N Neo2 Platinum

Me and my uncle both have MSI K8N Neo2 Platinum motherboards and both boards were bought from different places at different times. Both boards are exactly the same and both have the latest 1.4 BIOS.
We're both having the same problem with ps2 mice, I myself am not bothered about this problem but my uncle is so I need help.
Basically when you insert a ps2 mouse into the back of both our pcs, 7 times out of 10 the pc loads windows but the mouse doesnt move. The mouse is completely frozen. When you plug a usb mouse in, i can use that but still the ps2 mouse doesnt move.
When you plug in a ps2 keyboard along with the ps2 mouse, the mouse works everything time but without the ps2 keyboard in, most times the ps2 mouse doesnt work.
We both have no problems with usb devices but the ps2 mouse port (Green) isnt working all the time.
Having a quick look at this forum, i saw this thread.. PS/2 mouse not working exact same problem as me and my uncle.... is there a fix out now for this?
I use a usb mouse anyway and i know if my uncle switches to usb it will work but he shouldnt have to do this, if a board has ps2 support, it should work.

Quote
Two choices. USB Mouse or RMA it
What does RMA it mean?
Quote
The PS/2 ports on any computer can get blown if you plug a PS/2 device when the computer is powered.
I didnt know that, thanks for telling me, i know not to do this in the future.
Quote
Other than that, check BIOS to see if PS/2 option is enabled!
If ps/2 wasnt enabled in the BIOS, the ps2 devices wouldnt work at all would they? My ps2 keyboard works fine, my uncles ps2 mouse doesnt work sometimes so ps2 must be enabled in the bios.
thanks for the replies, could this be fixed if MSI knew this problem and release a new bios?

Best ram for MSI K8N Neo2 Platinum Edition?

Ho guys
Im getting a MSI K8N Neo2 Platinum Edition this week but cant decide what memory to use what is the best memory for this board here
are my options.
http://www.stegcomputer.ch/details.asp?prodid=kin-KHX32-1c2
http://www.brack.ch/aspx/default.aspx?ID=17879&mod=artikel
http://www.brack.ch/aspx/default.aspx?ID=17636&mod=artikel
http://www.brack.ch/aspx/default.aspx?ID=17885&mod=artikel
http://www.1000ordi.ch/2500
I will be overclocking.
Any help would be appreciated

Quote from: mehdi on 13-July-05, 22:09:22
XL's is verified by anand to top at 2-3-3 on DDR466 so this would be how much of a oce on a 3700sandy at those timings.
Well the 3700 San Diego har a max multilplier equals 11 and you can use the lower ones also .
So you have more options than one to reach say you set a goal for 2700mhz assuming you have air cooling (2.7ghz seems to be what most aim for without extreme cooling)
HTT reference clock at 233 with memory index 200 times multiplier 11 gives 2530mhz on the cpu and 233mhz/466DDR on the memory .
To maintain same memory speed (around or below 233mhz) with higher cpu frequency you must use a divider by setting max memory speed to 166 etc and use a higher HTT clock reference .
E.g
HTT=270
Multiplier=10
Memory index=166
Gives CPU/12 divider
CPU is then 2.7ghz
Memory speed = cpuspeed/12 = 2700/12 = 225mhz or DDR450 .
Multilplier memory index dividers:
7x with 133 : cpu/11
8x with 133 : cpu/12
9X with 133 : cpu/14
10x with 133 : cpu/15
11x with 133 : cpu/17
7x with 166 : cpu/9
8x with 166 : cpu/10
9X with 166 : cpu/11
10x with 166 : cpu/12
11x with 166 : cpu/13
7x with 183 : cpu/8
8x with 183 : cpu/9
9X with 183 : cpu/10
10x with 183 : cpu/11
11x with 183 : cpu/13
7x with 200 : cpu/7
8x with 200 : cpu/8
9X with 200 : cpu/9
10x with 200 : cpu/10
11x with 200 : cpu/11
( with 200 you will se the divider is the same as multiplier , thats why some calls this 1:1 )
There are also some tables for the dividers made by orcar wu over at extremesystems in this thread:
http://www.xtremesystems.org/forums/showthread.php?t=41595&highlight=a64+divider+table]
Using this calculation you can figure out your ram frequency before trying it in the bios .
E.g use 183 mem index/divider with cpu multiplier 10x with 2.7ghz as the target .
10 x 270 = 2700
memory will run at
2700/11 = ~ 245mhz or DDR490

MSI K8N Neo2 Platinum; ethernet probs!?

Hey guys,
I'm having problems getting my DSL hooked up to my new PC. I'm using a MSI K8N Neo2 Platinum, and according to my ISP phone-tech, the problem is with my "NIC".??
When examining the back of the PC, the slot where my ethernet cord is connected is green accompanied by yellow blinking. All lights on the Speedstream 5100 modem itself are green... No probs in the device manager... Switched ethernet cable from top to bottom port... Flahsed/Updated my BIOS from ver1.5 to ver1.8... Still have blinking yellow light... unable to connect to the internet on my new PC.
(Blinking light appears on both (top & bottom) ethernet ports when i have it plugged in)
Can someone point me in the direction of what to do / which drivers i need to install/uninstall...!?
Need help... Any is welcome.
The PC: Athlon 3500+ / 1 GB RAM / 80GB SATA WD / 250 GB 16M Cache IDE Maxtor / Geforce 6800GT / MSI K8N Nforce 2 Platinum

Doh, i seem to have taken a few step backwards...!
I returned the modem for another (brand = 2-wire gateway)... Still unable to connect; problems are similar, but let me tell you....
I have uninstalled all nvidia drivers --- went back to the drivers on CD. In Device Manager all devices are OK. I have both the nvidia LAN & MAC LAN ports enabled. Everything seems to be default settings (exception: i disabled windows firewall). Also I did not install nvidia FIREWALL option during install.
I plug in new modem... it boots, but middle light (broadband link light) is solid orange. According to the 2-wire site/faq
--- Broadband Link light ---
Solid orange - The HomePortal has established a physical broadband connection but was not able to successfully connect to your Internet Service Provider, or has not yet been configured. (can't PPPoE login. Username/Password failure or the other end is fubared.)
With this set-up; i am unable to run REPAIR on nvidia LAN connection (unable to restore IP); under the nvidia connection details: packets are being sent, but none recieved...
Ok, now get this.... I plug ethernet cord into the MAC LAN port; go to Network Connections; packets are being sent/recieved //// I am able to repair the connection.... yet the broadband link light = solid orange still!!
Next, I use the USB connection for the new modem, it asks for software/drivers... place install CD in... all lights = green... I AM able to connect!!!!!!!
probably, problem was i didn't load software from CD with the ethernet connection goin... !? (me = idiot !)
I'm gonna reinstall WinXP now... and hope to duplicate results, but on the ethernet wire (running SBC software)... if all else fails, i'll just prob set up the USB set-up..!
Thanks for your patience fellas...

MSI K8N Neo2 Platinum (WAKE On Lan with Realtek)?

Hello can the MSI K8N Neo2 Platinum (BIOS 1.B) WAKE On Lan with the Realtek card?
It does not appear to work for me and there is nothing in the BIOS.
My WOL packets wake up other PC's.
Please Help.

Hello !
Go into Bios Setup, Integrated Periphals, and disable the nvidia Lan, but let the Onboard LAN enabled.
Now go to PCI Configuration, Wakeup Events, and enable wakeup on PCI event and wake on LAN.
Check in Boot Order Menu if you can select the realtek onboard Lan as first booting device, push it in first place.
Another Option could be using the nvidia Lan, its reported to work with wakeon lan.
Greetz

MSI K8N Neo2 Platinum Fan

For some reason the small chipset fan on my MSI K8N Neo2 Platinum mobo has become a lot louder, I think it is running at higher RPMs that before. It starts up loud even if the computer is doing a cold boot from room temperature. Is there anyway to control this fan speed and quiet it down? and if I slow it down, will it hurt my motherboard? This fan is now louder than my graphics card fan, which makes it the loudest fan in my case even though it is the smallest.

Quote
Originally posted by Brogan
You could always replace it with a Zalman hedgehog.
I did.
Thanks for you reply, the only problem with the Zalman is that it's really big and I think my MSI NX6800GT's cooler would get in the way.

MSI K8N Neo2 Platinum slows down

Hi,
I have a little problem with my new K8N Neo2 Platinum. I installed Windows XP and the newest nForce drivers but if I copy files over LAN (tested both LAN-Ports) or install big applications my music played with winamp slows down. It's played with half speed. In addition to that my mouse pointer is very slow. After the setup or copying files everything is how it should be again. How can I solve this problem?
My system:
AMD Athlon64 3500+ (Winchester)
MSI K8N Neo2 Platinum-54G (tried different bios releases)
1024MB Corsair XMS Twinx DDR500
ATi Radeon 9800 Pro
2 80GB Maxtor S-ATA (DMA Mode enabled)
Creative Labs SoundBlaster Live! Player 5.1
MorLipf

Hello,
I copy files to my bro sometimes, 5Gb - all the steam GCF files for CS/HL/CSS/HL2.
My network usage is 80%-92%
My CPU usage is always under 15%.
It is worse when using 512Mb but as you have 1Gb it shouldn't be bad.
Check in the device manager, your cd drives should be set to DMA mode.

Problem on boot MSI K8N Neo2 Platinum

I am an italian lover of MSI motherboards.
After I bought a MSI KT3 Ultra Aru, then MSI K7N2 Delta ILSR and now I have a K8N Neo2 Platinum.
My hardware are:
MSI K8N Neo2 Platinum
Athlon 64 3200 Winchester
Corsair XMS 1024 TWINX 3200 PLL
Maxtor Diamond Plus 9 80 Gb
Asus Radeon 9600XT.
The problem is that at the power on the bios don't start. The LED on D-Bracket are three green and one red. On the manual this error are written:
Inizializing Video Interface
This will start detecting CPU clock, checking type of video onboard. Then, detect and initialize the video adapter.
This problem is frequent for my motherboard. However not always.
I attend your answer for this problem.
Thank you for all and for my english school.

Hi Italiano,
Welcome to the forum.
Have you details of your power supply. please show Maximum 3.3v,5v & 12v.
These are usually on the side of the power unit.
try:-
1) Enter bios Cell Menu - HT change from 5 ---> 4 using +/- keys. Save & exit.
If it still doesn't boot try:-
2) Re-inserting your Asus Radeon 9600XT. Sometimes they don't go in correctly.
3) See if you can boot with just 1 memory module in slot 1.
Luck

MSI K8N Neo2 Platinum (HELP!)

Similar Messages

Maybe you are looking for