MSI K8N Neo2 Platinum PCB 1.0 vs 1.2

I noticed someone has a PCB rev 1.2 of MSI K8N Neo2 Platinum 54G. Does anyone know what they have changed in the new revision? I got a PCB 1.0.

Dunno but I really hate to hear that a newer revision chipset/mainboard is availaible after I make a purchase.
Theres 2 typical scenarios regarding newer mobo revisions:-
1. The rectification of bugs and problems.
2. The same results can be achieved with fewer components driving down costs.
Hope it's the later  

Similar Messages

  • MSI K8N NEO2 PLATINUM MS-7025 VS asus N7600GS AGP Silent

    Hi, for my PC i have purchase an Video card Asus N7600GS silent, the problem is high temperetur GPU and PCB in my Video card after 3-5 minute  also only entered in bios, in monitor it appears "VGA signal out of limit" and have black screen random.
    Is incopatible problem ?Or AGP slot is damage or transistor for volt regulator of tension not work ?
    Bios in mainboard is the last, i have also upgrade bios in N7600GS but same problem is unusable i do not want to damage the video card because work fine with Gigabyte nforce3 ultra
    regards

    Sorry !
    My PC:
    MSI K8N NEO2 PLATINUM MS-7025   S.N: 54GK0503900257* with default optimized load bios setting
    Asus N7600GS AGP silent    (work fine with another MB Gigabyte NF3 ultra)
    ram Geil 2x 512           (work fine with another MB Gigabyte NF3 ultra)
    CPU Athlon X64 3200   (work fine with another MB Gigabyte NF3 ultra)        
    PSU Coolmaster 500W  (work fine with another MB Gigabyte NF3 ultra)
    nothing other connect and no overclocked
    regards

  • System suddenly won't power on (MSI K8N NEO2 PLATINUM NFORCE3)

    System specs are
    COOLERMASTER TAC-T01 WAVE MASTER ALUMINUM ATX 4X5.25 1X3.5 4X3.5INT case
    MSI K8N NEO2 PLATINUM NFORCE3 ULTRA S939 AGP 5PCI SATA 1394 SOUND 1000LAN
    KINGSTON HYPERX 1024MB DUAL CHANNEL KIT PC3500 2X512MB DDR 433MHZ 184PIN
    ATI Radeon X800XT PE AGP
    SEAGATE BARRACUDA 7200.7 200GB SATA 8MB 7200RPM 8.5MS OEM
    CREATIVE SOUND BLASTER AUDIGY 2 ZS 7.1 1394 PCI RETAIL BOX
    LITEON 16X DVD-ROM INT E-IDE RETAIl
    MITSUMI FA404A 7-IN-1 FLOPPY DRIVE & FLASH READER CF/SM/SD/MMC/MS
    LG 4163b dvd burner
    Nothing has ever been overclocked on this system.
    Everything is plugged into a Belkin Surgemaster powerbar.
    I haven't mentioned the power supply. I'll get to that. I have been using an ANTEC NEOPOWER 480W POWER SUPPLY (ATX12V  DUAL 12V RAILS ACTIVE PFC W/ DETACHABLE OUTPUT CABLES) for about a year on this system without
    any issues. One morning, I wake up, hit the power button on my coolermaster case, and nothing happens.
    CPU fan won't even spin. Nothing happens.
    O.k., blown power supply, I think . . . .
    So I take out my Antec and put it in another system. That system turns on
    without any problems.
    Hmm . . .
    I come here, and I read posts about
    potential compatibility issues with Antec power supplies. But if it's a compatibility
    issue why was my system working for about a year?
    O.k., fine. I'll buy a Enermax 535W EG565P-VE FMA 24P (115/230 VAC) power supply.
    I just plug it into the mainboard (nothing else). Hit the power button . . .
    The CPU fan spins for half a second, and then nothing.
    Did my motherboard just suddenly die for no reason?
    Any suggestions?

    Pull the AC plug from PSU and set cmos in clear position with battery removed for atlest 20 minutes perhaps longer .
    Then try to post the system barebone .
    Just cpu,1 pcs memory in slot 1 , gfx card , and keyboard in PS2.
    No usb devices at all including card reader and no pci cards harddisks or cdoms/dvd/floppy.
    It could also be caused by a short or a malfunctioning fan connected to mobo.
    Try to disconnect all case fans from mobo headers if you have any connected to additional fan holders.
    The chipset fan can also be disconnected momentarily just to see if it posts.
    If none of this helps , replace cmos battery and try again .

  • MSI K8N Neo2 Platinum Fan

    For some reason the small chipset fan on my MSI K8N Neo2 Platinum mobo has become a lot louder, I think it is running at higher RPMs that before. It starts up loud even if the computer is doing a cold boot from room temperature. Is there anyway to control this fan speed and quiet it down? and if I slow it down, will it hurt my motherboard? This fan is now louder than my graphics card fan, which makes it the loudest fan in my case even though it is the smallest.

    Quote
    Originally posted by Brogan
    You could always replace it with a Zalman hedgehog.
    I did.
    Thanks for you reply, the only problem with the Zalman is that it's really big and I think my MSI NX6800GT's cooler would get in the way.  

  • MSI K8N Neo2 Platinum slows down

    Hi,
    I have a little problem with my new K8N Neo2 Platinum. I installed Windows XP and the newest nForce drivers but if I copy files over LAN (tested both LAN-Ports) or install big applications my music played with winamp slows down. It's played with half speed. In addition to that my mouse pointer is very slow. After the setup or copying files everything is how it should be again. How can I solve this problem?
    My system:
    AMD Athlon64 3500+ (Winchester)
    MSI K8N Neo2 Platinum-54G (tried different bios releases)
    1024MB Corsair XMS Twinx DDR500
    ATi Radeon 9800 Pro
    2 80GB Maxtor S-ATA (DMA Mode enabled)
    Creative Labs SoundBlaster Live! Player 5.1
    MorLipf

    Hello,
    I copy files to my bro sometimes, 5Gb - all the steam GCF files for CS/HL/CSS/HL2.
    My network usage is 80%-92%
    My CPU usage is always under 15%.
    It is worse when using 512Mb but as you have 1Gb it shouldn't be bad.
    Check in the device manager, your cd drives should be set to DMA mode.

  • Problem on boot MSI K8N Neo2 Platinum

    I am an italian lover of MSI motherboards.
    After I bought a MSI KT3 Ultra Aru, then MSI K7N2 Delta ILSR and now I have a K8N Neo2 Platinum.
    My hardware are:
    MSI K8N Neo2 Platinum
    Athlon 64 3200 Winchester
    Corsair XMS 1024 TWINX 3200 PLL
    Maxtor Diamond Plus 9 80 Gb
    Asus Radeon 9600XT.
    The problem is that at the power on the bios don't start. The LED on D-Bracket are three green and one red. On the manual this error are written:
    Inizializing Video Interface
    This will start detecting CPU clock, checking type of video onboard. Then, detect and initialize the video adapter.
    This problem is frequent for my motherboard. However not always.
    I attend your answer for this problem.
    Thank you for all and for my english school.

    Hi Italiano,
    Welcome to the forum.
    Have you details of your power supply. please show Maximum 3.3v,5v & 12v.
    These are usually on the side of the power unit.
    try:-
    1) Enter bios Cell Menu - HT change from 5 ---> 4 using +/- keys. Save & exit.
    If it still doesn't boot try:-
    2) Re-inserting your Asus Radeon 9600XT. Sometimes they don't go in correctly.
    3) See if you can boot with just 1 memory module in slot 1.
    Luck

  • PC Perspective #1 Leaderboard entry MSI K8N Neo2 Platinum nForce3 Ultra

    PC Perspective...ala AMDMB.com has the top to rated pc builds using the  MSI K8N Neo2 Platinum nForce3 Ultra.
    Whooohooo
    PC Perspective
    I like Ryan's picks.  By the way AMDMB does rock...fantastic forums great info on mobo's not just AMD either.  

    HI! i'm the one wih the raid problem on a k8n neo2....
    That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
    The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
    I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
    thanks for helps

  • The build in firewall in MSI K8N Neo2 Platinum

    Hello everyone,
    I am using an MSI K8N Neo2 Platinum-54G nForce3. I wonder if anyone else is using the built in firewall? I have some problems with my Internet connection and I think it is firewall related.
    I would like to know if anyone else has any valuable feedback on this subject.
    Thank you!

    Works fine for me, make sure you have the latest drivers installed and turn off any other firewall including the Windows one. You will find that you may have to set up some rules to open up ports for some apps. I have set mine up to play Farcry and now get no Punkbuster problems.
    I am using the Nvidia ethernet to connect toe the internet and the Realtek to network my second PC.

  • Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

    I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
    It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
    Here are the details of my system:
    MSI K8N Neo2 Platinum (BIOS 1.B)
    Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
    2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
    Asus Radeon AX800 Pro (256 MB)
    PSU Antec Sonata 380W
    HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
    HDD Seagate 250Gb SATA (ST3200822AS)
    HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
    Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
    BenQ DW1640 DVD-Writer ATA (Sec Slave)
    P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

    Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
    Now I've contacted Maxtor for (hopefully) a new firmware.
    Quote from: rogueUK on 31-July-06, 16:55:42
    insego please use the SEARCH BUTTON
    I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
    Quote
    Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
    Maybe in retrospect I should first have tried the solutions in other topics.

  • MSI K8N Neo2 Platinum with Western Digital 750Gb Caviar Green 32mb

    Hi all, this is my first post and im a bit of a numbskull when it comes to upgrading, thus this post.
    My HDD is on its last legs and I want to get a Western Digital 750Gb Caviar Green 32mb. Im not sure weather it will work with my  MSI K8N Neo2 Platinum (MS-7025). Can anyone help me out? If you have any suggestions for a better HDD to go for that would also be appreciated, Cheers

    Burst speeds are high mainly because of the disk's cache. That's the only part of the HDD that can get near the maximum bandwdth of the controller.
    The bottleneck for speed is in the fact that the HDD's mechanical properties won't allow it to work faster. With SSD's it is or will be different.
    Back to topic: the WD Green is an excellent choice. I've 6 of those running here now, 5 in a NAS and 1 in my pc and they're simply good. Not the fastest, but very stable, quiet and fast enough.

  • MSI K8N Neo2 Platinum, Socket 939, nVIDIA nForce3 Ultra Chipset w/ 8X AGP (ATX)

    MSI K8N Neo2 Platinum, Socket 939, nVIDIA® nForce3 Ultra Chipset w/ 8X AGP (ATX)
    and a 3500 90 nm amd 64.........is this a god combo ......Im swicthing mine for this(just the cpu and mobo)  opions?..........any help is welcome...Its in the name of gamging...

    Quote from: duffyone on 31-March-05, 11:54:15
    Now... don't LOL, but there is a reason I picked the 3200+ instead of the 3000+, but I can't remember why???
    Probably because the 3000+ only has a 9x maximum multiplier, whereas the 3200+ will go to 10x.
    2600MHz at 9x means a FSB of 289MHz and ram at 289MHz for best performance.  Will your ram do 289MHz?  Of course you *can* run your memory and fsb async, but I prefer not to.
    Chip

  • MSI K8N Neo2 Platinum cant upgrade to BIOS 1.4, Windows wont boot.

    Hello
    I have a MSI K8N Neo2 Platinum and I cant upgrade to BIOS 1.4.  I have tried everything and cannot get Windows XP to boot with BIOS 1.4.
    I have reset the BIOS, set defaults, cleared the battery etc but when I load BIOS 1.4 (from a 98SE an ME boot dish and even from the Live Update?
    The only solution is to rebuild Windows after loading BIOS 1.4???
    Help

    Hi !
    Well, I have that problem, too. I think the reason is a new RAID-BIOS-Version built in the BIOS-Update. I´ve tried the beta-versions V1.51 and V1.5X, too - but they won´t run anyway.
    My WinXp hangs while booting (before the WINDOWS-XP-Logo appears, or while fading in...). I cannot reinstall Windows completely because, when I install the 2 raid-drivers, the installation routine hangs before the licensetext - when I don´t install the drivers i cannont install on the raid-drive (beacuase the installation routine shows 2 hdds).
    I think, a new driver will solve this problem, but I don´t know where to find it....
    A.

  • News - BIG PROBLEM - MSI K8N Neo2 Platinum - DOES NOT POWER!!!

    Hi to everyone.
    I'm a proudly owner of a MSI K8N Neo2 Platinum that in one year gave me no problem until yesterday morning.
    I used the computer in the night before and when I finished I turned it off and I went to bed.
    Yesterday morning I found the power led blinking (like if the system was in standby), and there was no way to turn the PC on.
    I even took off the battery for more than 12 hours and I left only minimal components installed:
    the video card (Gainward GeForce 6800),
    the psu (Antec TruePower 550W),
    1 x 512 MB Ram Crucial Ballistix,
    and I checked them into another computer and they work perfectly.
    I tried shorting the MB power switch pins with a screwdriver and I've even tried to power on the system without the Memory or the Video Card... I've tried everything that came across my mind with no efforts!!!!
    Every time I give power to the MB appens only that the power led starts blinking, but pressing the button the PC doesn't turn on.
    PLEASE HELP ME... I really don't know what else to do!!!
    Thanks,
    Alberto

    Quote from: alberto_melita on 20-August-05, 20:14:56
    Hi thanks for the answers.
    I do have a D-Bracket, but my problem is not that the system does not boot or does not post... my system DOES NOT POWER ON (!!!!), so d-bracket is useless!
    When I plug the system power    the only thing that happens is that the power led starts blinking (with the system still in soft-off), and if I press the power switch button nothing happens! 
    I've the bios for 7025 v1.8 and the settings where for OFF on power-loss ond pressing the button (can't rememeber if it was more than 4 sec) was meant to turn off the computer, but considering that I un-powered the pc more than once without the MB battery the settings should be factory default by now.
    I went through the Windows-XP shut-down system, and i could not be an electrical problem as I always used the PC with a pretty good UPS unit.
    Right now these are the full specs of my sytem:
    - MB MSI K8N Neo2 Platinum nForce3 Ultra
    - GAINWARD 6800 2600 GLH 256 MB Ram
    - PSU Antec TruPower 550 W
    - CPU AMD64 3500+ core Winchester @11*210 Mhz (this cpu has never overclocked very well)
    - HEATSINK Thermalright XP-90 with a 12 Cm Enermax Fan (CPU temp in always below 55 °C when stressed)
    - 1 x 512 Mb RAM Crucial Ballistix DDR400 optimized for  MSI K8N Neo2 Platinum
    I left only these things inside my computer in the hope that it would turn on... it did not work. I tested each component but the MB, and they work perfectly.
    Again...
    Thanks for you efforts, any help will be appreciated.
    Alberto.
    All parts have been tested: CPU/RAM/GFX/PSU/HD/DVD,  just not the MOBO ?
    Checked if the MOBO is shorting in the case ?
    Have you tried using the reset switch as power, on/off switch ?  I've seen before when the power switch stops working (lose/bad wire busted spring) after swapping  reset to power, then the system turned on. Worth a try, as sending it back to USA won't be cheap. If its over 1 year old it mite not be covered by the re-seller and or MSI. Best to check this out as law and warranty is different from country to country.
    Good Luck

  • MSI K8N Neo2 Platinum AND SATA2

    i have  MSI K8N Neo2 Platinum motherboard with 3500+ cpu and WD 160 hard sata disk.
    I 'd like to ask if my MSI K8N Neo2 Platinum motherboard support sata2 hard disk drives, in order to know which HD  to connect as a second HD drive, SATA or SATA 2 ??

    It'll see SATA2 as regular SATA. You won't loose any speed either. There are no hard drives that actually benefit from SATA2 spec speeds. Well, maybe in isolated near theoretical benchmark cases one current model might be faster in SATA2 mode. 
     We just haven't got the technology yet.

  • MSI K8N Neo2 Platinum and Venice E6

    Hi!
    I have just bought an MSI K8N Neo2 Platinum motherboard and an AMD Athlon64 3000+ processor with Venice E6 core (ADA3000DAA4BW).
    Will this mobo boot with that processor? Or do i have to use a Winchester to flash the BIOS first? Personal experiences would be helpful!
    Andres.

    Your new board probably came with the 1.9 bios. The new 7025v1B.zip bios (1B only a couple days old) I think is for some of the new X2 AMD Processors. The MSI link to Products/Mainboards/Neo2/Processor Compatibility is now setup to use the 7025v1B.zip bios. As I recall the previous Processor Compatibility Chart for 1.9 bios was OK for all the Venice cores (E6 or not). I think it is only some of the latest E6 bigger models are affected by the latest 1B bios. Maybe someone has the older 1.9 bios Processor Compatibility Chart.   
    You shouldn't need to use a Winchester, some X2 processors would be recognized as earlier X1 models until the newer bios was installed. I think you should be OK with the 1.9 bios. I have the San Diego 4000+ and my board, one month old, came with the 1.9 bios installed.

Maybe you are looking for