MSI K8N Neo2 Platinum, Socket 939, nVIDIA nForce3 Ultra Chipset w/ 8X AGP (ATX)

MSI K8N Neo2 Platinum, Socket 939, nVIDIA® nForce3 Ultra Chipset w/ 8X AGP (ATX)
and a 3500 90 nm amd 64.........is this a god combo ......Im swicthing mine for this(just the cpu and mobo) opions?..........any help is welcome...Its in the name of gamging...

Quote from: duffyone on 31-March-05, 11:54:15
Now... don't LOL, but there is a reason I picked the 3200+ instead of the 3000+, but I can't remember why???
Probably because the 3000+ only has a 9x maximum multiplier, whereas the 3200+ will go to 10x.
2600MHz at 9x means a FSB of 289MHz and ram at 289MHz for best performance. Will your ram do 289MHz? Of course you *can* run your memory and fsb async, but I prefer not to.
Chip

Similar Messages

K8N Neo4 Platinum Socket 939 NVIDIA nForce4 Ultra

ok i just got a new mb and processor and psu .
amd 64 3500+
psu = 520w 12v-36a
mb = K8N Neo4 Platinum Socket 939 NVIDIA nForce4 Ultra
all i did was excgange this mb and psu and cpu with my old ones. and i installed everything fine but when i turn on the comp i get no display like i have no video card....ive dbl checked everythhing and put in 2 otehr video cards and still no display...im not shure if i need 2 uninstall my old bios? if thats possable i have no clue or uninstall anything b4 i made this switch can you please help me out thanks alot.

k did that .. ok this thing is getting 2 me lol it gives me prossesor error 4 red lights then i turn off does sdame thing mess around with it turn power supply off completely for more than 10 sec then back on and it boots up giving me yet anothyer error like 1 and 4 yellow 2 and 3 red or other way around and i turn it off turn it back ona nd leds are still teh same arnt they supposed 2 reset? then i turn off my psu for more than 10 sec back on and its reset...i dunno what this means is it the battery on the mobo? prolly not i have no clue @ this point and ive tried diff keyboards.

K8N Neo4 Platinum Socket 939 Nvidia nForce4 Ultra ( LAN Questions )

I have started to purchase my parts for a new build. I will be using the MotherBoard in the Subject line. My present system is in my signature. I have a Wireless Internet Service which has a small Yagi antennae on the roof which is pointed at a tower which is 3.1 miles away. My present setup, I have a GigaFast WF747-UI Wireless USB Router pluged into my computer. On the wall, I have the D-Link DL 524 Wireless Router which is hard wired to the antennae. I have the NVIDIA nForce MCP network controller on the system I now have disabled.
My question is: On the new setup, can I just disabled all of the onboard LANs and not even load any of the software for them??
Thanks for any advice: Pop's

Quote
On the new setup, can I just disabled all of the onboard LANs and not even load any of the software for them??
this has been answered many times in the thread.
If you are not going to use them; disable in bios, windows won't find them, so won't show (at all) in device manager and you won't be prompted for 'new found hardware'. Therefore no need to load the drivers for them.
If you subsequently want to use them them obviously will have to enable in bios, then you will be prompted for 'new found hardware' then you will have yellow explanation mark in device manager until driver(s) loaded.

PC Perspective #1 Leaderboard entry MSI K8N Neo2 Platinum nForce3 Ultra

PC Perspective...ala AMDMB.com has the top to rated pc builds using the MSI K8N Neo2 Platinum nForce3 Ultra.
Whooohooo
PC Perspective
I like Ryan's picks. By the way AMDMB does rock...fantastic forums great info on mobo's not just AMD either.

HI! i'm the one wih the raid problem on a k8n neo2....
That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
thanks for helps

System suddenly won't power on (MSI K8N NEO2 PLATINUM NFORCE3)

System specs are
COOLERMASTER TAC-T01 WAVE MASTER ALUMINUM ATX 4X5.25 1X3.5 4X3.5INT case
MSI K8N NEO2 PLATINUM NFORCE3 ULTRA S939 AGP 5PCI SATA 1394 SOUND 1000LAN
KINGSTON HYPERX 1024MB DUAL CHANNEL KIT PC3500 2X512MB DDR 433MHZ 184PIN
ATI Radeon X800XT PE AGP
SEAGATE BARRACUDA 7200.7 200GB SATA 8MB 7200RPM 8.5MS OEM
CREATIVE SOUND BLASTER AUDIGY 2 ZS 7.1 1394 PCI RETAIL BOX
LITEON 16X DVD-ROM INT E-IDE RETAIl
MITSUMI FA404A 7-IN-1 FLOPPY DRIVE & FLASH READER CF/SM/SD/MMC/MS
LG 4163b dvd burner
Nothing has ever been overclocked on this system.
Everything is plugged into a Belkin Surgemaster powerbar.
I haven't mentioned the power supply. I'll get to that. I have been using an ANTEC NEOPOWER 480W POWER SUPPLY (ATX12V DUAL 12V RAILS ACTIVE PFC W/ DETACHABLE OUTPUT CABLES) for about a year on this system without
any issues. One morning, I wake up, hit the power button on my coolermaster case, and nothing happens.
CPU fan won't even spin. Nothing happens.
O.k., blown power supply, I think . . . .
So I take out my Antec and put it in another system. That system turns on
without any problems.
Hmm . . .
I come here, and I read posts about
potential compatibility issues with Antec power supplies. But if it's a compatibility
issue why was my system working for about a year?
O.k., fine. I'll buy a Enermax 535W EG565P-VE FMA 24P (115/230 VAC) power supply.
I just plug it into the mainboard (nothing else). Hit the power button . . .
The CPU fan spins for half a second, and then nothing.
Did my motherboard just suddenly die for no reason?
Any suggestions?

Pull the AC plug from PSU and set cmos in clear position with battery removed for atlest 20 minutes perhaps longer .
Then try to post the system barebone .
Just cpu,1 pcs memory in slot 1 , gfx card , and keyboard in PS2.
No usb devices at all including card reader and no pci cards harddisks or cdoms/dvd/floppy.
It could also be caused by a short or a malfunctioning fan connected to mobo.
Try to disconnect all case fans from mobo headers if you have any connected to additional fan holders.
The chipset fan can also be disconnected momentarily just to see if it posts.
If none of this helps , replace cmos battery and try again .

New to OC - a64 3200+ 939, MSI K8N Neo2 Platinum

Dear All,
First off. I am new here so hi to you all
I am new to overclocking. Please tell me how far I can go for my CPU (RAM I don't plan to), and what settings in bios I need to change (in simple words, don't try me on abbrev too much :P)
Spec:
AMD Athlon 64 3200+ 939 Winchester
MSI K8N Neo2 Platinum
2x512 Samsung PC3200 DDR Dual Channel RAM (I don't plan to OC RAM)
Antec TruePower 380W (Sonata edition)
BFG GeForce 6800 OC (I don't really plan to OC that either, dunno how)
Would I be able to up from 2.0ghz to 2.2ghz?
Current CPU idle temp: 38 degrees (Arctic Silver 5 applied)
Thank you!
dL

Quote
Originally posted by dL.
Temp at load (playing CS:S) is about 41-42 degrees.
Idle is about 35-38. Temps look ok
Will my Antec TruePower 380W power supply provide sufficient power when increasing vcore? Sjould do just fine Will increasing vcore damage anything? Not as long as it stays cool. How much should I increase it by? Just up a .05 at a time and test.
Also, can I lower my HT to even lower like 3x to get more clock speed? Yes but X4 should be good up to 250. Youn need to keep it under 1000. 250 x4 = 1000
dL

The build in firewall in MSI K8N Neo2 Platinum

Hello everyone,
I am using an MSI K8N Neo2 Platinum-54G nForce3. I wonder if anyone else is using the built in firewall? I have some problems with my Internet connection and I think it is firewall related.
I would like to know if anyone else has any valuable feedback on this subject.
Thank you!

Works fine for me, make sure you have the latest drivers installed and turn off any other firewall including the Windows one. You will find that you may have to set up some rules to open up ports for some apps. I have set mine up to play Farcry and now get no Punkbuster problems.
I am using the Nvidia ethernet to connect toe the internet and the Realtek to network my second PC.

IS my MSI K8N Neo2 Platinum FRIED!??

Ok I am assembling my first computer right now. I have the Motherboard (msi K8N Neo2 Platinum nForce 3 Ultra Socket 939) a gig of corsair pc3200 RAM, a Samsung 7200RPM hardrive, a Samsung DOuble layer CD/DVD burner, 5 fans, and AMD Athlon 64 3500+ (NCC). But when I plug everything into the motherboard, all the fans start spinning everything looks like its ine except the IDE ports. My CD-ROM wont go on and I just got it! everything is new out of the box. I have a single drive, the IDE ribbon conecting from the motherboard, then the master connecting to the CD-ROM. The jumper is still in there. The "system part" of the IDE ribbon is plugged into the IDE-1 on the motherboard. And my harddrive is SATA, when I plug that in, it doesnt look like its working either! All my power cables are fine because when I plug them into the fans they work...any suggestions?

Yapyap,
would have been nice to post solution.
Drop Ht from 5 to 4 in bios - cell menu as soon as you can get into bios.
How to clear the CMOS
1) disconnect the power cable.
2) push the power button to drain the capacitors
3) Move the CMOS jumper to the clear position, from it's original 1-2 position to 2-3
4) Wait a minute to be sure the CMOS has been cleared. Take your Time
5) Return the CMOS jumper to it's original position 1-2
6) Plug in power cable.
7)restart computer
8) enter bios and select load optimized Bios defaults - save & exit
9) let pc reboot, if you have any settings you want changing do them now.
like HT Settings hard disk boot order etc.,
10) hopefully youll boot

Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
Here are the details of my system:
MSI K8N Neo2 Platinum (BIOS 1.B)
Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
Asus Radeon AX800 Pro (256 MB)
PSU Antec Sonata 380W
HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
HDD Seagate 250Gb SATA (ST3200822AS)
HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
BenQ DW1640 DVD-Writer ATA (Sec Slave)
P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

News - BIG PROBLEM - MSI K8N Neo2 Platinum - DOES NOT POWER!!!

Hi to everyone.
I'm a proudly owner of a MSI K8N Neo2 Platinum that in one year gave me no problem until yesterday morning.
I used the computer in the night before and when I finished I turned it off and I went to bed.
Yesterday morning I found the power led blinking (like if the system was in standby), and there was no way to turn the PC on.
I even took off the battery for more than 12 hours and I left only minimal components installed:
the video card (Gainward GeForce 6800),
the psu (Antec TruePower 550W),
1 x 512 MB Ram Crucial Ballistix,
and I checked them into another computer and they work perfectly.
I tried shorting the MB power switch pins with a screwdriver and I've even tried to power on the system without the Memory or the Video Card... I've tried everything that came across my mind with no efforts!!!!
Every time I give power to the MB appens only that the power led starts blinking, but pressing the button the PC doesn't turn on.
PLEASE HELP ME... I really don't know what else to do!!!
Thanks,
Alberto

Quote from: alberto_melita on 20-August-05, 20:14:56
Hi thanks for the answers.
I do have a D-Bracket, but my problem is not that the system does not boot or does not post... my system DOES NOT POWER ON (!!!!), so d-bracket is useless!
When I plug the system power the only thing that happens is that the power led starts blinking (with the system still in soft-off), and if I press the power switch button nothing happens!
I've the bios for 7025 v1.8 and the settings where for OFF on power-loss ond pressing the button (can't rememeber if it was more than 4 sec) was meant to turn off the computer, but considering that I un-powered the pc more than once without the MB battery the settings should be factory default by now.
I went through the Windows-XP shut-down system, and i could not be an electrical problem as I always used the PC with a pretty good UPS unit.
Right now these are the full specs of my sytem:
- MB MSI K8N Neo2 Platinum nForce3 Ultra
- GAINWARD 6800 2600 GLH 256 MB Ram
- PSU Antec TruPower 550 W
- CPU AMD64 3500+ core Winchester @11*210 Mhz (this cpu has never overclocked very well)
- HEATSINK Thermalright XP-90 with a 12 Cm Enermax Fan (CPU temp in always below 55 °C when stressed)
- 1 x 512 Mb RAM Crucial Ballistix DDR400 optimized for MSI K8N Neo2 Platinum
I left only these things inside my computer in the hope that it would turn on... it did not work. I tested each component but the MB, and they work perfectly.
Again...
Thanks for you efforts, any help will be appreciated.
Alberto.
All parts have been tested: CPU/RAM/GFX/PSU/HD/DVD, just not the MOBO ?
Checked if the MOBO is shorting in the case ?
Have you tried using the reset switch as power, on/off switch ? I've seen before when the power switch stops working (lose/bad wire busted spring) after swapping reset to power, then the system turned on. Worth a try, as sending it back to USA won't be cheap. If its over 1 year old it mite not be covered by the re-seller and or MSI. Best to check this out as law and warranty is different from country to country.
Good Luck

New CPU, Msi K8n neo2 platinum - no boot!

Greetings!
I got the following components:
*MSI K8N NEO2 Platinum -54g MB
*4 x 512mb Geil Value Ram
*Gainward 7800GS+ Bliss 512mb AGP
*Samsung Spinpoint 500gb SATA HD
*Corsair 620HX (620W) PSU
*CPU AMD Opteron 180 Dual Core (upgrade from AMD 3000+ Winchester)
I recently upgraded my PC with a new HD, more ram, new CU Fan/heatsink - on an AMD 3000+ (Winchester). PC wouldn't boot - I did however manage to fix it. I think it was because of the ram, one of the bricks had some dust on it. Since then, my pc has worked 100%...
Today, however, I got a new PSU and CPU in the mail! A Corsair 620W PSU and an AMD OPTERON 180 Dual. I carefully cleaned the surface on the heatsink etc, and applied an appropriate amount of "Arctic Alumina" on the CPU/heatsink (as followed per instructions from Arctic). When I have connected everything, and fire my pc up - it just won't boot.. (The monitor won't light up).
Since then, I have carefully checked all wires, unplugged/replugged etc.
But it just won't boot!
I do have the latest bios (1.0D), so it should support my CPU.
I should mention some "weird" things, though. When I try to boot up, everything seems normal (All fans are running), but there are no lights on my case! And I can't turn off the PC while holding down the "power" button on my case. I can't reset either.. as soon as I turn the PC on (by turning on the PSU power switch), the PC starts running. Normally I would have to push the button on my case. ALSO: I have cleared CMOS, still a black screen. And I have tried 2 different monitors, so I know it aint that either.
My old PSU was a Chieftec 360W one (and my case is a Chieftec also). The old PSU was connected to "SFAN2" on my MB,.. my new PSU isn't connected to any "SFAN" at all.. I doubt that has anything to do with the problem though?
Any suggestions on what I might do ?
Edit: D-bracket shows this (Yellow, red, red, yellow):
BIOS Sign On
- This will start showing information about logo, processor brand name, etc... - It stops here. No boot screen

Quote from: BOSSKILLER on 14-November-07, 21:14:42
remove power cord from the PSU(else will not work) and Clear CMOS Guide.
leave one memory stick only in a 1st DIMM slot near to CPU socket and try to boot.
Done & done.
Still no boot screen :(

MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

First post, whoo hooo
So what version of BIOS are u running? I recently installed the two newest versions 2.0 and 2.1, and they both give me problems. With the latest (2.1) I'm getting the same error as you. Returning back to previous BIOS fixed my problems. Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
Let me know if you fix it, thats why im here, .

MSI K8N Neo2 Platinum; ethernet probs!?

Hey guys,
I'm having problems getting my DSL hooked up to my new PC. I'm using a MSI K8N Neo2 Platinum, and according to my ISP phone-tech, the problem is with my "NIC".??
When examining the back of the PC, the slot where my ethernet cord is connected is green accompanied by yellow blinking. All lights on the Speedstream 5100 modem itself are green... No probs in the device manager... Switched ethernet cable from top to bottom port... Flahsed/Updated my BIOS from ver1.5 to ver1.8... Still have blinking yellow light... unable to connect to the internet on my new PC.
(Blinking light appears on both (top & bottom) ethernet ports when i have it plugged in)
Can someone point me in the direction of what to do / which drivers i need to install/uninstall...!?
Need help... Any is welcome.
The PC: Athlon 3500+ / 1 GB RAM / 80GB SATA WD / 250 GB 16M Cache IDE Maxtor / Geforce 6800GT / MSI K8N Nforce 2 Platinum

Doh, i seem to have taken a few step backwards...!
I returned the modem for another (brand = 2-wire gateway)... Still unable to connect; problems are similar, but let me tell you....
I have uninstalled all nvidia drivers --- went back to the drivers on CD. In Device Manager all devices are OK. I have both the nvidia LAN & MAC LAN ports enabled. Everything seems to be default settings (exception: i disabled windows firewall). Also I did not install nvidia FIREWALL option during install.
I plug in new modem... it boots, but middle light (broadband link light) is solid orange. According to the 2-wire site/faq
--- Broadband Link light ---
Solid orange - The HomePortal has established a physical broadband connection but was not able to successfully connect to your Internet Service Provider, or has not yet been configured. (can't PPPoE login. Username/Password failure or the other end is fubared.)
With this set-up; i am unable to run REPAIR on nvidia LAN connection (unable to restore IP); under the nvidia connection details: packets are being sent, but none recieved...
Ok, now get this.... I plug ethernet cord into the MAC LAN port; go to Network Connections; packets are being sent/recieved //// I am able to repair the connection.... yet the broadband link light = solid orange still!!
Next, I use the USB connection for the new modem, it asks for software/drivers... place install CD in... all lights = green... I AM able to connect!!!!!!!
probably, problem was i didn't load software from CD with the ethernet connection goin... !? (me = idiot !)
I'm gonna reinstall WinXP now... and hope to duplicate results, but on the ethernet wire (running SBC software)... if all else fails, i'll just prob set up the USB set-up..!
Thanks for your patience fellas...

MSI K8N Neo2 Platinum (WAKE On Lan with Realtek)?

Hello can the MSI K8N Neo2 Platinum (BIOS 1.B) WAKE On Lan with the Realtek card?
It does not appear to work for me and there is nothing in the BIOS.
My WOL packets wake up other PC's.
Please Help.

Hello !
Go into Bios Setup, Integrated Periphals, and disable the nvidia Lan, but let the Onboard LAN enabled.
Now go to PCI Configuration, Wakeup Events, and enable wakeup on PCI event and wake on LAN.
Check in Boot Order Menu if you can select the realtek onboard Lan as first booting device, push it in first place.
Another Option could be using the nvidia Lan, its reported to work with wakeon lan.
Greetz

MSI K8N NEO2 PLATINUM MS-7025 VS asus N7600GS AGP Silent

Hi, for my PC i have purchase an Video card Asus N7600GS silent, the problem is high temperetur GPU and PCB in my Video card after 3-5 minute also only entered in bios, in monitor it appears "VGA signal out of limit" and have black screen random.
Is incopatible problem ?Or AGP slot is damage or transistor for volt regulator of tension not work ?
Bios in mainboard is the last, i have also upgrade bios in N7600GS but same problem is unusable i do not want to damage the video card because work fine with Gigabyte nforce3 ultra
regards

Sorry !
My PC:
MSI K8N NEO2 PLATINUM MS-7025 S.N: 54GK0503900257* with default optimized load bios setting
Asus N7600GS AGP silent (work fine with another MB Gigabyte NF3 ultra)
ram Geil 2x 512 (work fine with another MB Gigabyte NF3 ultra)
CPU Athlon X64 3200 (work fine with another MB Gigabyte NF3 ultra)
PSU Coolmaster 500W (work fine with another MB Gigabyte NF3 ultra)
nothing other connect and no overclocked
regards

MSI K8N Neo2 Platinum, Socket 939, nVIDIA nForce3 Ultra Chipset w/ 8X AGP (ATX)

Similar Messages

Maybe you are looking for