MSI K8N neo4 -F User comments PLS help ....is it a good buy?

As above
Can those MSI K8N neo4 -F give me comments of the board. Did you all regert buying this mobo
What are the good pros and cons
HAve been hearing some complains about HSY in the MOBO is a bit too noisy, is it true ?...
How does it comapres to gigabyte K8NF-9 Which cost $195 here in sg
MSI K8N neo4 -F cost about $240
So which more worth to get ?
Thanks

LOL Didn't you know that no overclocker is ever happy with any parts??? They never allow them to acheive the ultimate 300% overclock they are always after... I have yet to meet an overclocker that actually liked their parts and peices. It is usually the MB they blaim no matter what other junk they have in the system. It is just the way of the world. Read any tech forum and look at who is doing the screaming and why.
Simply put at normal speeds things work well for most anyone if they have stuff set up properly. Once you enter the dark hallways of the overclocker though you are more often on your own and you better know what you are doing or have a fat wallot. Overclockers tend to change parts out more often than Bill Gates changes his socks.
That is not to say that it isn't fun to push the envelope a bit or shoot for that next level. Follow the dark side and you can acheive greatness or end in smoking rubble. Just remember though that is more on you to acheive that goal than on any parts maker and you will be set into the right mindset.

Similar Messages

MSI K8N Neo4 -F User PLS Fall in .........

would like to know Which is lounder?
North Bridge HSF
or
default HSF given by AMD
thanks

If you allow dynamic fan speed controll for the CPU fan (in the bios) then the nb is much louder.
I reduced my nb fan from it's original 7000 rpm to 5000 rpm which helps.
My AMD stock fan is spinning at 2100 rpm right now, and this is with F@H running all the time.

MSI K8N Neo4 Platinum SLI sound needs -5V; newest Antec 550W has no -5V rail

I came within a whisker of ordering a non-returnable 3700 Venice, MSI K8N Neo4 Platinum SLI mobo and an upgraded Power Supply, Antec's newest 550W PS the TP2-550 EPS12V ($117). This has dual 2x24pin 12V 19A rails and is touted as the new V2.0 EPS12V/ATX12v compatible power supply for high performance SLI systems. By accident I came across a page at MSI for this mobo
http://www.msi.com.tw/program/products/mai...ail.php?UID=641
At the end is this warning: MSI Reminds You...
• For this model, you must use a Power Supply which has a -5V pin supply. Also, the users manual which I downloaded on Pg 2-10 says the same thing
The above Antec PS specs do not show a -5V rail, nor does an Enermax 600W I looked at. The V2.0 specs for ATX12v which added 2x24pin 12V rails dropped -5V rail from the spec and it appears MSI is not conforming to the spec (See Antec response at end) None of the web sites selling these PS & mobos contain any warning. I vaguely recall from a forum a while back it may have something to do with the Soundblaster system in the mobo.
http://www.antec.com/us/productDetails.php?ProdID=22551 (click specifications)
Isn't this a major showstopper which is going to cause a lot of grief for those of us upgrading to SLI systems using this mobo and upgrading our PS to the newest & best power design? We won't know the PS won't work until we build the system.
Regards, Ron
Antec reply to me:
>>>>Thanks for the link. Since MSI's website does state the motherboard needs the -5v, the True550EPS12V will not work with this motherboard. The Standard (http://enhanceusa.com/documents/atx12v_v2.01.pdf) has removed the use for the -5v rail and it is no longer needed. MSI has not manufactured that motherboard to the Standard. Finding an ATX12V v2.0 power supply with the -5v might be hard to find. You should contact MSI for a compatibility list of power supplys that were tested to work with the K8N SLI Platinum.

Quote from: ccve3 on 21-May-05, 07:27:40
Wow!! syar2003 thanks for that post. I've spend an hour going through it & fasteddies links. Now I are a power expert. The dual rail argument is enough for me to go back to the MSI K8N Neo4 Platinum SLI with one of the single rail PS -5V units listed by fasteddie. The only question left now refers to computerpro3 recommendation on ultra power supplies for SLI
>>I quite simply wouldn't dream of putting anything else in my machine. Keep in mind, this section is for 2x 6800 models, not the 6600's which most any good psu will handle (like Antec Neopower, ocz 520, etc). . Pc Power and Cooling 510 Deluxe SLI edition (refer to list)
2. Zippy/Emacs 550-700w models
3. OCZ 600w (personally I would get the pcp&c for the price, but it's been proven here, so I'll be fair...).
These are really high end, expensive and only 3-4 choices. Since I'm getting one 6800GT and eventually another & possibly eventually a 4800 X2, I was hoping the OCZ 520W would do it but computerpro3 says Powermaster 520 isn't good enough for SLI. I found that there is an OCZ 600W ATX12 dual rail which surprisingly has a -5V rail needed for K8N Neo4 SLI Soundblaster. Will this meet computerpro3's preference for a high end PS for SLI systems even though I'm losing the 1 rail advantage. Maybe the 600 Watts just overwhelms the 1 rail/2 rail question.
Thanks again for the teriffic help
Regards, Ron
Wondering what you settled on. I got the Antec TP550 and it's flawless on the board. I even have the older 20pin model which works perfectly (including sound). If you really wanted what I would consider to be a top dog (pcpower and cooling), and find the -5v rail missing, all you have to do is place a phone order and request they add a -5v rail. It's a minimal cost and a total solution for having everything. Just my $0.02

MSI K8N Neo4 FI Compatible with AMD 3800+ X2?

I just bought:
MSI K8N Neo4 FI
AMD Athlon 64 3800+ X2
Gainwood 7800GT Golden Sample
hec Pb-480PB 480W
Problem is that i don't get a picture when i start the computer.
Everything seems to work, all the cables are plugged in.
The gfx has power from the cable.
Can it be that the motherboard dosen't recognize the CPU, and that won't give my a picture?
Help would be appreciated.

That should be enough to start the computer. It has two +12V rails, which are of good enough ampage.
Now it looks to me like it needs a newer BIOS version to recognise the CPU.
See: http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=651&kind=1 I think this is your motherboard?!
You'll need another A64 CPU to flash the BIOS though.
Just to settle akhille's mind, you could also try a better PSU.

Newly Built System. MSI K8N Neo4/SLI Plat with AMD X2 3800 Crashing in all Games

I just built this system yesterday..
MSI K8N Neo4/SLI Plat with AMD X2 3800 latest BIOS 3.7 amd MB drivers
I have a Albatron Geforece 7800 GT PCI-E 256Mgs with the latest Drivers. 78
WINXP SP2 latest stuff.
DirectX 9.0C
I have 2 512 DDR3500 Memory Sticks.
SATA 160 Hard Drive
DVD 8X NEC Burner
All 3d games lok it up. 3DMark2001 SE locks it up too.
I ran Memtest and everything passed fine.
Anyway all 2d video works fine. but any 3d video screen goes black and the system locks up solid.
Any help work be appriciated
DaaDoctor

Welcome to the forum DaaDoctor
If you creat a signature (in profile) it will save you having to type your spec's out each time or us looking for it. Use mine as a template.
What PSU are you using ? Can you list the power output ? (writen on side of psu)
Going from your specs you listed your graphics card is very hungery on power so I would suggest your psu isn't up to the job under load.
Post the spec and we will know for sure.

MSI K8N-Neo4 and PCI-E x4

Hi Folks,
I've got an MSI K8N-Neo4 (MS-7125) motherboard that I'm looking to add a RAID card to. It's got a PCI-Express x4 slot on the board that I'd like to utilize. However, I've seen some conflicting information regarding it's use. In the manual on page 2-26 it states "PCI Express x4 Slot (Support PCI-E x2 device Only)". However when I look at the webpage for the board at http://www.msicomputer.com/product/p_spec.asp?model=K8N_Neo4_Platinum& it makes no mention of this limitation.
The main reason why I'm wondering is because I'd like to add a HighPoint RocketRAID SATA raid controller to my system. If the slot can handle x4 cards, then I'll purchase the 2310 model, which is an x4. If it cannot, then I'll purchase the 2300, which is an x2 model. I've seen some mentions of other people on the forums with K8N-Neo4 boards using the 2320 (an x4 card with 8 SATA ports instead of 4 on the 2310), but haven't seen what sort of bandwidth they're getting. Are you actually able to get PCI-E x4 bandwidth out of this port? Or will it downgrade it to PCI-E x2 or PCI-E x1 (the PCI-E spec says that when cards a plugged into a different size port they only need to be supported at x1)? Or, and even better question, will it even work?
Thanks for any help you can provide.

Quote from: Bas on 09-July-06, 07:25:26
Those are not different then from what's on the motherboard
Want a real one? Look at this: >>Real one!<<
That's real raid controller.....
What you mention is just the same as the onboard stuff.
As for the Linux raid stuff, I presume you mean the Linux Software raid, no those controllers aren't that good, but the High-points aren't that good either.
Heck, they don't even have their own CPU or memory.....the one I showed you has and is WAY faster
(PS. sample given is PCIx, won't fit your board, but that's a raid controller!)
Okay, that still doesn't answer my question about the PCI-E slot. You make a decent point, but I was more using the Highpoints as an example and because they came up in several searches of the forum. For the sake of getting a real answer, lets assume it is a real RAID card, such as the PROMISE SuperTrak EX8350 RTL, which according to the Serial ATA on Linux page is a real raid card and all that. Will it work in the PCI-E x4 slot on the MSI K8N-Neo4 Platinum or not?
All I really want to know is if the slot can actually run a PCI-E x4 card or not. The documentation contradicts itself.

MSI K8N Neo4 Platinum or MSI 6600GT PCI-E ?

Dear Sirs,
I've just bought a MSI NX6600 TD GT 128MB PCI-E and
Motherboard MSI K8N Neo4 Platinum.
I Think that one of these is defective bacause WinXP
can't work with MSI original drivers, MSI old
drivers or Nvidia drivers. The system reboots.
I think that i've tried almost everything and this
card only works badly with VesaSave driver (Generic
Windows driver).
Could a defective video card works ?
Is it possible that the problem is the Motherboard ?
Any idea ?
Help me please,
Thank you very much,
ISW
MSI K8N Neo4 Platinum
A64 3500+ Winchester
Original Cooler
DDR PC4000 GEIL 1GB ULTRA DUAL
MSI NX6600 TD GT 128MB PCI-E
Maxtor 120GB
Seagate 120GB
XP Home SP2

Duplicate Post.
Look for all replies here:
MSI 6600GT PCI-E or MSI K8N Neo4 Platinum ?
Take Care,
Richard

MSI 6600GT PCI-E or MSI K8N Neo4 Platinum ?

Dear Sirs,
I've just bought a MSI NX6600 TD GT 128MB PCI-E and
Motherboard MSI K8N Neo4 Platinum.
I Think that one of these is defective bacause WinXP can't work with MSI original drivers, MSI old drivers or Nvidia drivers. The system reboots.
I think that i've tried almost everything and this card only works badly with VesaSave driver (Generic Windows driver).
Could a defective video card works ?
Is it possible that the problem is the Motherboard ?
Any idea ?
Help me please,
Thank you very much,
ISW
MSI K8N Neo4 Platinum
A64 3500+ Winchester
Original Cooler
DDR PC4000 GEIL 1GB ULTRA DUAL
MSI NX6600 TD GT 128MB PCI-E
Maxtor 120GB
Seagate 120GB
XP Home SP2

About PSU I'm a old (41 years old) newbie, and I had to re-assemble my old computer to work but I check this before with MSI software and at motherboard bios voltage check and remember that it was ok it is a 600 watts. But I think that even if it is not, I could at minus install the driver and start Windows. I had no possibility to even start Windows.
If I install any MSI or Nvidia driver, when loading WindowsXP the screen turns black and at some time after the system reboots and prompts to start in secure mode. So I can't do anything, even starts Windows with this videoboard with right drivers. It only works with "VesaSafe" driver.
ISW

New build: MSI K8N Neo4 Platinum + maxtor 300gb = problem?

Got these 2 products included in a order:
MSI K8N Neo4 Platinum nForce4 Ultra (Socket 939)
Maxtor DiamondMax Plus 10 NCQ 300GB
While checking up on the MB on the MSI site, I noticed a version of the bios (1.2) that says 'support for 300gb maxtor drives'
That's the same HD one I have coming with my order >.<
If the MB I get hasn't got that version of the bios already installed will I have trouble installing the drive?!
I downloaded the bios and it says in the readme not to install it from a floppy disk, so I guess you need a system up and running to make that update in the 1st place. No Idea how to go about this, if the need arises.

Quote from: Supershanks on 19-May-05, 21:45:00
Hi drjugears,
Welcome to the forum.
Many people are runnimg ok anyway as dope says.
But it's not an issue you can update the bios via floppy b4 connecting the maxtor.
See Flashing the BIOS for Users using NON FAT file system This is a guide written by msi. Strictly speaking if you folow the instructions you aren't flashing from a floppy the actual update is done on a virtual drive in memory.
if you need a floppy boot disc see Why no floppy for bios flash?
luck with build
Thanks very much for the welcome and info.
Unfortunately I'll have to wait a while to see...I installed everything....but need some adapter for the 6pin connecter on the ATI card. The power supply came with some 8 pin one. So I need a 4 to 6 pin adapter. Doubt If I'll find one local, so will probably have to wait until monday now to try it out.

Maxtor 6Y160MOSTD 160GB DiamondMax Plus 9 SATA/150 -- on -- MSI K8N Neo4 Plat...

Hello there... I have a Maxtor 6Y160MOSTD 160GB DiamondMax Plus 9 SATA/150 on my MSI K8N Neo4 Platinum. I've had this problem before but it wasn't important enough to report until now.
I have the latest BIOS (1.B)
Now... I did have a dual boot - XP and Fedora Core... then I decided since Linux would only install the base text system, to get rid of it. I formatted using Windows disk manager. BUT the GRUB MBR was still on there. It resulted in an error. So I took my winXP disk and popped it in. I tried to first repair the MBR. I used the command BOOTCFG DEFAULT. that didn't work. So without thinking I decided to reinstall XP all together. When It got to the restart, the GRUB was still there, therefore didn't boot. Well what I ended up doing is trying the repair again. Used the command FIXBOOT - didin't work. I tried agian. Repair - found the command FIXMBR DUH! So I ran that and it recognized that the original MBR had been replaced. So I fixed the MBR and rebooted. XP wanted to install. So I let it. I came back some time later and found out it was stuck on "Initializing Devices...". At first I thought it was the graphics card. b/c linux had problems before probing the graphics card. I decided out of the blue to swap my 160GB HDD for a smaller PATA 2.1GB HDD and installed XP seemlessly. The obvious reason: XP couldn't detect the hard drive. The reason this is confusing is because I installed XP before on my HDD and no problems. I tried figeting with the chords, switching SATA slots. No luck. I really wanna know whats up with that. Help PLEASE.
Did I leave some info out?

Have you tried to download the Firmware for your HDD? Maybe you can refer to this site ==> https://forum-en.msi.com/index.php?action=profile;u=77029

Anyone paired up a MSI K8N Neo4 mobo and a thermaltake soprano w/PSU

hello,
im pretty new here, im about to build a new computer, im getting a MSI K8N NEO4-F, and the case im getting is a thermaltake soprano w a thermaltake PSU, some ppl are telling me that the PSU only has a 20-pin power connector, will that work in the K8N neo4-f mobo ?
any help would be appreciated
thanks

i didnt mess with the door alarm thing lol didnt want to waste my time. I just use my aspire 520 watt the amps are in my profile its only a 20 pin but it kicks a$$, Strong amps and great cooling. http://www.newegg.com/Product/Product.asp?Item=N82E16817148008 its a little longer so when installing and removing psu just unscrew the four little screws for the top USB

Bluetooth problem with msi K8N Neo4-54G

I buy a msi K8N Neo4-54G and it was said on the box : "MSI Dual-Net Card (World First 802.11g+Bluetooth on single PCI Card)"
dont find any driver or something for bluetooth, but Wi-Fi work perfectly.
I hope someone know how to fix that problem.
thanks for your help

Quote from: crazy on 05-January-06, 16:07:28
You may firstly clear cmos and load defaults in the bios, and if it is available, please attach us a picture of the screen which the issue occurred when you hit enter during the its detecting the SATA hard disk. I am a little confused about what you said. Please tell me what changes have you made before the issue took place. I just want to help, so do many other people. But please firstly give us more detailed information.
I did it and nothing! Should I restore the original bios version that came with the mother?
I'll explain the problem: You enter BIOS, go to the disk properties (where says LBA, LARGE, CYLINDERS, HEAD, etc) and hit enter, usually the screen goes blue and shows a line at the bottom of the screen (they are like triangles pointing downside) and 2 seconds after everithing comes back showing the data of the disk ok? Well, now it hangs forever in the "triangles pointing downside" part and I have to restart the machine...
Does this belongs to the issue of the K8n neo4 platinum with the maxtor hdd's ??? The mobo is malfunctioning?
Please helpppp! Thanks!

No Post/Black Screen - MSI K8N Neo4 Platinum

Hello,
Here is my problem, I bought MSI K8N Neo4 Platinum motherboard and got
- 3500+ cpu
- CORSAIR XMS 1GB memory
- PCI-E Leadtek 7800GT video card
- Aspire 520Watt PSU
I have put all of it together fine( I have put many systems for friends before) hooked all the power cables, case to mobo stuff, fans. Every time I turn it on fans go on, and lights go on but there is nothing on the screen as if no signal from video card to monitor, plus no error beeps which means cpu and memory is fine right. I have tried to just have memory, video card and nothing else hooked up, same result. I have tried another PSU, same result. Now to add to this, I had same problem with ABIT motherboard and another video card(same) which eliminates bad motherboard and bad video card, since both I have replaced except this time I got MSI mobo and not ABIT. I got same problem with all of it, nothing comes up, no post while fans spin when I turn it on etc... What could be the problem? memory? case? Any ideas?
Please help me as I spent a lot of $ and time on this and had no signal to monitor so far. Thanks.

As I said at this point I am trying to boot without any drives plugged in just to get a post and boot up but no go. So basically all my drives are unplugged and I cannot get it to work, I have tried different psu and same problem. I have tried another video card( I RMA this one and got another) it goes and snaps into PCI E slot all good, I have checked that many times. The only thing I can think of is memory at this point but this is brand new XM Corsiar memory and why wouldnt the motherboard beep ( i hoked speaker) if there was any error like that? I just dont get what is going on.
I have no idea what bios version I have as I have been unable to check it, unless you want me to check the chip version on chipset?

Audigy2 + MSI K8N Neo4 Platinum nForce4 Ultra prob

Hi I have an audigy2 from my old pc and installed it on my new system the motherboard is a MSI K8N Neo4 Platinum nForce4 Ultra after I installed it I began getting 'Machine_check_exception' blue screen of death, I used the creative auto update to update to the latest drivers, now the pc makes a hissing sound and reboots it's self.
Any help would be apprecieated.

hi
i am getting th same thing with my gigabyte nforce 4 board
ga8nxp-sli
could this be an nforce 4 related issue?
i found through a process of elimination that the conflict apears to be with windows audio service
i turn it off and all the problems just go away but i still get no sound (not much help there i am afraid)
regards
andy

NVIDIA Network Adapter problem (MSI K8N Neo4-F)

We have an MSI K8N Neo4- F motherboard. We are running Windowx XP SP2 (just upgraded to Service Pack 2). The computer will only boot in Normal mode if we disable or remove the NVIDIA Network Adapter driver. If we attempt to boot in Normal mode, it always ends with a Bad Pool Header problem (Blue Screen of Death). If we boot in Safe Mode with Networking, we can access the Internet. If we disable or remove the driver, then boot in normal mode, we can run in Normal mode but we do not have internet connection.
Does anyone know how we can use the onboard Network Adapter, and still boot in normal mode?
We have been using the latest drivers from MSI for this motherboard. Is there a different version that can be used? Is it possible that we have to update our BIOS for it to work correctly with SP2?
Thanks!

I think I may have misunderstood what you meant by a clean install. I probably should have asked what you meant before I answered my last post.
If you mean "did we just build the system by wiping the hard drive, installing XP SP1, then apply SP2", the answer is no. The system has been running Windows XP SP1 for several years without any problems, and we just wanted to upgrade to SP2 because there is some software that we want to load that requires SP2 to run. We have lots of software loaded on this machine that we use every day that we really want to avoid (short of time right now to tackle that project) rebuilding the entire operating system/machine because of the work involved in reloading all the software, etc.
Am I correct in assuming that we would have to wipe out the hard drive and start over if we did a re-install from a slipstreamed SP2 cd? If so, then we will probably just stay with SP1 for the time being if there is no other option to fix this Nvidia driver problem until we have more time to do a complete re-install and reload of the computer.
What about just installing a NIC in one of the PCI slots and use that instead of the onboard NetWork Adapter?
Thanks for all your help.

MSI K8N neo4 -F User comments PLS help ....is it a good buy?

Similar Messages

Maybe you are looking for