MSI K8N/Neo4-SLI Cold Boot problem

Sup guys, my system won't restart whenever I crank the HTT to 239+. I heard it has something to do with the nForce4 chipset but I don't know how to fix it. I have the latest BIOS, chipset driver, video drivers, the whole she-bang, but still nothing. I'm currently running my 3000+ Venice @ 2151mHz (239x9) w/ a 4x HyperTransport multiplier (1.450vCore), 512mb x2 Corsair Valueselect @ 166 Mem index (default voltage) 2.5-3-3-8. Thanks.

I used to have corsiar vs and it wont go much higher for you...the stix just crap out after a while. If you want more, you have to go with more expensive mem stix like crucial ballistix or patriot xblk/other tccd mem. Just my 2 cents.

Similar Messages

K8N NEO4 Platinum cold boot problem with 165 opteron?

I have this board and have a cold boot problem with my opteron. Is there anything I can do to fix this? Its starting to get very anooying.
K8N NEO4 Platinum
165 opty dual core
2X1GB Ballistix PC4000
160GB sata2
7800GTX
X-Fi platinum
600 watt seasonic PSU

Well I am running them at the rated speed of 250 and the rated timings of 3-4-4-10 on the rated 2.8 volts. Ballistix have been known to die quickly when you throw to many volts at them for some reason. I dont get the cold boot problem with the OCZ. Once I finally get it to boot with the Ballistix it works just fine but the next morning I play hell to get it to boot again. I dont even get the main screen to let me get into bios. It just stays black. I have done all kinds of stress testing and ran memtest with no problems. I am really at a loss here.

MSI K8N Neo4 SLI Platinum / HDD_LED Problem

Hello,
First off I would like to say that MSI boards rock! I've always been happy with them, in fact this is my fourth MSI board. The board is K8N Neo4 SLI Platinum.
Unfortunately, I'm having a problem with this one. The problem is minor, but it shouldn't happen, at least I don't think. The problem is that even though the hard drive activity wire is properly connected to HDD_LED, it is not working with my SATA drive. No light at all!
I read in newsgroups that there are people with this same problem (although not necessarily with this same board). I haven't found a solution to this yet. So my inquiry here is:
1. Is there anyone else with this exact board with a SATA drive that can confirm his/her HDD_LED light is also not working with a SATA drive?
2. Does MSI have a fix/solution for this?
Thank you.

Quote from: Jesteronyer6 on 23-July-05, 08:10:26
THere is a positive and negative side on those pins have you tried flipping it over?
This has got to be one of the biggest "pains in the a&&" in setting up a new mobo and connecting it to a new case...

Newly Built System. MSI K8N Neo4/SLI Plat with AMD X2 3800 Crashing in all Games

I just built this system yesterday..
MSI K8N Neo4/SLI Plat with AMD X2 3800 latest BIOS 3.7 amd MB drivers
I have a Albatron Geforece 7800 GT PCI-E 256Mgs with the latest Drivers. 78
WINXP SP2 latest stuff.
DirectX 9.0C
I have 2 512 DDR3500 Memory Sticks.
SATA 160 Hard Drive
DVD 8X NEC Burner
All 3d games lok it up. 3DMark2001 SE locks it up too.
I ran Memtest and everything passed fine.
Anyway all 2d video works fine. but any 3d video screen goes black and the system locks up solid.
Any help work be appriciated
DaaDoctor

Welcome to the forum DaaDoctor
If you creat a signature (in profile) it will save you having to type your spec's out each time or us looking for it. Use mine as a template.
What PSU are you using ? Can you list the power output ? (writen on side of psu)
Going from your specs you listed your graphics card is very hungery on power so I would suggest your psu isn't up to the job under load.
Post the spec and we will know for sure.

MSI K8N Neo4/SLI SB Live! 24 bit CA 0

Hello,
I have the MSI K8N Neo4/SLI with SB li've! 24 bit sound card on-board and I want to buy a 5. speaker system with 3 digital input 3(2 optic / coaxial).
The digital optic or the digital coax output from the sound card can make 5. output so i can receive with the 5. system
The system is a Panasonic SC-HT5 (http://www2.panasonic.com/webapp/wcs...s&displayTab=S)
Thank you.

The card cannot create 5., so if the audio you're playing isn't already an encoded 5. (AC3) stream, then the card cannot change that. If you're playing DVDs, they should work fine provided everything is set up correctly (including the DVD software, it should be set to SPDIF/Bypass).
Cat

Bios Settings For MSI K8N Neo4/SLI Platinum MB

Hello all... Has anyone came up with the best and most stable bios settings for the MSI K8N Neo4/SLI Platinum motherboard yet. Specifically under the CPU and Memory menus.
If anyone has seen any, please post them. or post a link.
Thanks
DaaDoctor

Well that depends on the installed CPU and memory, doesnt it? So I find that question kinda odd.
One thing though: Dont use Cool n Quiet.

MSI K8N NEO4 SLI PLATINUM Northbrigde fan faulty

Hi, i have an MSI K8N NEO4 SLI PLATINUM mobo since it was released till now the northbridge fan gone faulty. It spin slow as if something causing it from spinning. Worst of all it makes a LOUD vacuum noise 'voooooooooooommm'. Anyway to fix this or to get it replaced? I still have warrenty for it. Thanks
leon,
London, United Kingdom

Then there is a post here in the forum where some guys are talking about the replacement of that hsf and I think they did find one of some brand that I do not recall at the moment, but search here and you will find it...
Be well....

New build: MSI K8N Neo4 Platinum + maxtor 300gb = problem?

Got these 2 products included in a order:
MSI K8N Neo4 Platinum nForce4 Ultra (Socket 939)
Maxtor DiamondMax Plus 10 NCQ 300GB
While checking up on the MB on the MSI site, I noticed a version of the bios (1.2) that says 'support for 300gb maxtor drives'
That's the same HD one I have coming with my order >.<
If the MB I get hasn't got that version of the bios already installed will I have trouble installing the drive?!
I downloaded the bios and it says in the readme not to install it from a floppy disk, so I guess you need a system up and running to make that update in the 1st place. No Idea how to go about this, if the need arises.

Quote from: Supershanks on 19-May-05, 21:45:00
Hi drjugears,
Welcome to the forum.
Many people are runnimg ok anyway as dope says.
But it's not an issue you can update the bios via floppy b4 connecting the maxtor.
See Flashing the BIOS for Users using NON FAT file system This is a guide written by msi. Strictly speaking if you folow the instructions you aren't flashing from a floppy the actual update is done on a virtual drive in memory.
if you need a floppy boot disc see Why no floppy for bios flash?
luck with build
Thanks very much for the welcome and info.
Unfortunately I'll have to wait a while to see...I installed everything....but need some adapter for the 6pin connecter on the ATI card. The power supply came with some 8 pin one. So I need a 4 to 6 pin adapter. Doubt If I'll find one local, so will probably have to wait until monday now to try it out.

:K8N Neo4 SLI Platinum bios problem

I have a strange problem with this bios, it goes back to default when you shut it down for awhile.
The date goes back to Jan 1 2004 and all settings go to default.
I've changed the battery thinking sure that was the problem, I've heard they've had some problems.
The funny thing is if you shut it down and then restart it it's ok, but if you leave it for awhile it goes
back to default. I flashed to 3.7 bios thought that might do it, but no such luck.
MSI said just get the board or bios serviced, has anyone ever got a new bios chip from MSI?
I'm trying to get this fixed without all the hassle, but it's not looking good.
I like the board everything else has went fine, I guess I could leave it running 24\7's.
When you make changes in the bios all works great, no problems except it won't hold them.
3000 daabp lbble 0521 Thanks for any ideas on this
K8N sli
2x6600gt
2x512 ocz raid silicon
550 antec ps

I checked the sticky's (which I should have done to start with) I see there have been a lot of
problems like this.
Most of the problems have been with the K8N Neo4 Platinum, mine is the sli platinum but the problem
seems the same.
The bios shows the new energizer I put in at 2.86.
I will try to fix this as it was a refurbished board from Newegg.
I tried the cmos button several times and it made no difference, most of the complaints were having
to change batteries every 2 to weeks.
The new battery I put in didn't last the next morning when I booted it up it was right back to default
and didn't even see the raid setup.
It only takes about 1 minute to reset it but thats a pain in the butt, as I said if you just shut it down
for a little while it saves the bios setting's fine.
I like the board, it overclocks fine if you can keep the settings.
I'm going to take the board out where I can get a good look in the batt. holder and see if I can
see anything that might short the batt.
Thanks for the reply and any other suggestions

MSI K8N Neo4 SLI motherboard: Creative Onboard Sound

Hello all,
This is my first time on this forum, and I hope you all can help me. I have an MSI K8N Neo 4 SLI board. It comes with Onboard Creative 24bit sound.
Now, lately I have had problems with it. One day, it just stopped working. I thought it was somewhat weird and just reinstalled the drivers. It worked for a while longer and eventually quit again. Well, it was time for a reformat anyway, so I thought a clean installation of drivers would solve the problem. Well, it didn't. Now, I have downloaded the latest drivers from the MSI website, and they allowed the sound to work for one evening, but this morning it is dead again. My computer says that all hardware is working fine. I havn't had a bluescreen, and the music plays in the Windows Media Player, I just can't hear it through the speakers. My speakers do work fine because I have tried many different speakers, and none of them change the dead silence outcome. I hope my onboard sound is not dead! Please reply if you know anything else that I can do...

I didn't want to start a new thread with the same topic, usually get flamed everywhere else for that...
Anway
AMD Athlon XP 64 3500 socket 939
2gb PC3200 Ram (1 x 1gb / 2 x 512mb sticks )
ATI Radeon X800XT PCI Express
3 x 250GB SATA western digital drives
Windows XP Professional with latest service packs etc...
Got the latest motherboard bios from live update,latest creative drivers from their website etc...
**Edit** also worth mentioning my system starts very slowly if I have my onboard sound enabled and doesn't run at what I'd call 'normal' if I turn it off in the bios my system works perfectly.

MSI K8N NEO4 SLI - RAM Detection

Hello,
I'm wondering if my motherboard is faulty or is it my video/cpu/ram that's causing my problem.
Well here's the problem. when I was doing a virus scan using norton antivirus and surfing the web my pc just shut down and restarted. But when it restarted it won't post and gives me the RAM Detection Error on the D-Bracket and the 1 beep and 1 silence and 1 beep.
I would have to clear the cmos every time it does that. I ran memtest with no errors on the ram. I've tried only using 1 stick of ram and my older ram DDR333 stick, also tried different slots, everytime clearing the cmos. With the same result. One try I had to put the DDR333 RAM in slot 2 for it to post.
When I put the DDR333 ram in it posts for abit. But when I add my DDR400 1Gb dual memory the bios still shows the DDR333 settings. After setting the ram to 2-3-3-6 and restarts it gives me the RAM detection error.
Is this due to a bad motherboard or is it my CPU or could my Video card be causing this or RAM
I don't have another CPU or Video card to see if it is those two that's causing this..
I'd RMA'd the motherboard to get it fixed, and I'm thinking of getting the Diamond Plus but before I do I'm wondering if the problem isn't due to my CPU or Video card. Would hate to buy the D. Plus and have the same problem...
Oh, My BIOS is the 9.10 that msi sent me but shows as 9.0b1 on boot up. Guessing it's a beta bios. Yes I tried the Platinum 3.8 with the same problem.
Sorry if this seems to be confusing....
Alexander

Quote from: DARTH_TSUNAMI on 29-October-06, 04:54:12
Im going through the same problem, memory detection on dbracket, i´ve tried using diferent memory and stuff, i have a 3500+ here but im not sure it that would work, im gonna try it later.
anyway i wanted to know if u guys solved your problems and how u did it, cheers
you should start your own thread on this issue. also give us the amps on the 12V line for that PSU. a detailed description of your problem and your troubleshooting up to date would also be nice.

MSI K8N Neo4 SLI Platinum power requirements

Is it true that it needs a -5v rail on the PSU in order to properly power the onboard SB live?

The 12 volt and 5 volt rail are allowed a 10% tolerence and on very high end PSU they actually go 5%.
12 volt +/- 10%= 13.2 max and 10.8 min
12 volt +/- 5%= 12.6 max and 11.4 min.
The biggest mistake you can make is using software to check voltages. Software and BIO (BIO is just software) readings are not accurate.
The only way to see what is really going on is to backprobe your P/S connector or a molex cable while system is booting, running and then under load using a multimeter.
I will include a little thing that I made up a few years ago for someone else, mind that it is a few years old but most of the ratings still hold true and you can adjust it to meet your needs. Like a few others I think that might have memory issues or maybe a driver problem.
Here it is then:
A 7200rpm HD draws around 20 watts, this 20 watts includes both the 5v & 12V rail.
HD and CD's generally are figured at 2 Amps per device, let’s brake this down some.
Spin-up: 12V x 1.3A + 5V x 650mA = 19W
Read/Write/Idle: 12V x 350mA + 5V x 700mA = 7.75W
Seek: 12V x 675mA + 5V x 725mA = 12W
Those would be typical for a 7200 rpm IDE drive. As you can see a HD requires more power at start-up then during actual operation. This is why sometimes a PC takes a few tries to start up before it will actually make a successful boot and once it boots to windows all seems well or sometimes a occasional restart, which would indicate a weak/ bad P/S.
Now to find the power used by the CPU you can check either AMD or Intel for the spec sheets on that CPU or you can follow this link that has tons of CPU ratings, CPU specs.
Some more basic mathematics… When a 12-volt circuit is drawing 10 amps, it is consuming 120 WATTS of electrical power. 12 Volts X 10 Amps = 120 WATTS.
This is the formula: P = E x I
P - Watt (power)
E – Voltage (electrical pressure)
I – Amperage (current flow)
Serial/PS-2 ports draw <35mA and if you have USB ports then they have a maximum of 500mA per port, again only if they are used- no use means no draw.
The PCI slots are allowed 5A of the +5V, 0.5A of the +12V and 7.6A of the 3.3V Max per slot, again that is if the slots are used. So if the serial ports, PS-2 and USB ports are being used you are looking at around 5A draw on the MB, which would be around 20 Watts.
So now we can add things up. (This is just an example of a basic system)
MB=20W
CPU= 60W, used as a norm.
HD=20W
CDRW=25W
DVD=20W
Graphic card=15W / newer GF4 and ATI 9000 and up= 35W
RAM 10 Watts per 128 MB
Network Card 5 Watts
Average per PCI Card 8 Watts
Total around 200W for this example.
Now this will fall on different rails and that is were things get tricky, because as you see in my above break down of the HD that a HD use's both the 12V & 5V rail. This is why it is important that the 12V rail be at least 18 Amps if you plan on having more then 1 HD and case fans. Then you have the 3.3V & 5V rails that need to be strong too, the 3.3v rail is actually not so important with newer DDR MB and today’s CPU’s as it is mainly supplying the PS-2 ports power as well as some device cards. Most newer MB use the 5v and 12v rails mainly to supply the demands of today’s devices.
Now this 200W is the bare min what is needed for things to run but in the real world you will want to add 50% to the 200W for your min P/S need, this allows room for spikes and heavy demands and a little head room to add hardware in the future.

HELP!! K8N Neo4/SLI Power Supply problem

Hi. I really need help.
I'm upgrading my computer and using my old case, a raidmax case with a 420w power supply.
The problem is, i discovered that the power supply for the motherboard is only 20 pin, while the motehrboard asks for 24 pin. I discovered that I can fit the 20 pin in theere, but still, 4 pin will be left empty. Is that okay? Or do I need a new power supply.
Thanks!

https://forum-en.msi.com/index.php?topic=85543.msg611646#msg611646

My MSI K8N Neo4 SLI board settings

Here are a few snapshots of my current settings. Looking for some feedback or recommendations. Thanks.
[ ERROR: SPECIFIED ATTACHMENT MISSING ]

Are you having a problem? If so, tell us about it and include a complete description of your whole system as described in the Forum Guide.

Water block for MSI K8N Neo4 SLI

Guys, I want to improve stability by adding a water block to the nforce4 chipset but there isn't much clearence underneath the second EVGA 6800GT.
Does anyone know of a waterblock with a low enough profile to fit underneath the card?

Click Here, this might work

MSI K8N/Neo4-SLI Cold Boot problem

Similar Messages

Maybe you are looking for