MSI K8N Sata problem on raptor!

Guys I need some serious help. I installed my new mobo and SATA 36gb raptor. Made sure sata is enabled in bios etc. Install win xp making sure I press F6 and load the drivers but just before setup begins after formatting etc it asks for the nvidia drivers again? It won't load the ones off the floppy though?
Anyone using a sata drive or any sata can you tell me exactly how you install windows on a sata drive because I have tried everything here...

Haven't installed all the stuff yet, gonna do it tomorrow I think. I saw something interesting on the CDROM of MSI:
Code: [Select]
If you lost your Driver Disk labeled as "Promise 376/378 Driver"
This file will teach you how to make one Driver Disk
First please perpare one formatted 1.44M Floppy
Then please copy necessary driver from MSI Driver CD
- Driver for WinXP
  Please copy CDROM:\IDE\Promise\S-ATA\PDC20378\Driver\WinXP\ folder
                         \IDE\Promise\S-ATA\PDC20378\Driver\fasttx2k file
                                \IDE\Promise\S-ATA\PDC20378\Driver\ULSATA file
                       \IDE\Promise\S-ATA\PDC20378\Driver\txtsetup.oem file
I think these are the files we need to place it on a disk for installing Windows XP on a SATA harddisk

Similar Messages

  • MSI K8N NEO2 Problems problems..

    Hi,
     I bought a MSI K8N Neo2 (Antec 480W PSU Lian Li Case 6800GT). Got major problems with it, Mouse and Keyboard don't seem to work on power on often. Also when they do work, there are stability problems (no overclocking stock AMD cpu fan).
     does this sound like it needs RMAing? anyone else seen similar problems or got suggestions to a fix?
    Cheers  

    Quote
    Originally posted by Galvin
    I could write a list with all the problems this board has:
    Hangs booting when detecting ide devices
    Doesn't recognize cdrom drive or hdd randomly
    All pci and 1394/Realtek networking are dead
    Impossible to install xp on sata drive: "error loading os" sinstem hangs
    Can't go back to previous bios version
    Maybe it is a great quality board but It doesn't pay off if I have to go through all this problems.
    Usual advice applies, have you tried running it outside of the case incase it is shorting out on something?
    There is a good guide here on how to setup the bios for the Neo/Neo2
    http://forums.pcper.com/showindex.php?t=340342
    Good luck with your problems, I know what a bummer it can be when your expectations are high and they are not met....
    let us know how you get on

  • Sound card(s) on MSI K8N NEO2 Problems

    Hello,
    I recently purchased a complete new computer.
    3500+ AMD
    K8N Neo 2
    6800 LE
    512 MB Dual channel OCZ
    480Watt Enermax
    Zalman coolers
    Windows XP
    Now i have installed reinstalled old and new drivers of the ACL sound card but it results in stuttering sound always.
    I have installed a LIVE 5.1 soundblaster New and old drivers and disabled the realtek in the bios.
    Nothing seems to work i have reinstalled the xp OS 5 times now and i am fed up with it.
    I have tried XP SP1 XP SP2 all without result.
    I have default values on the bios. Because i simply do not like to tamper with it.
    I have tried to switching the sata cable from port 1 to 3 but also no result!!!
    Please help before i throw the mobo out of the window and never buy MSI stuff again.

    Quote from: supra_freak on 03-March-05, 03:27:07
    What pci slot are you using on the mobo for the sound card? dont use the very bottom one (red one or whatever colour it is, i think its meant for things like wireless network card to supply constant power to it). But if you are actually using the white pci slots instead and getting these problems then i have nooo idea, otherwise just try the white slots and mix it up and try every one..
    Yes i only have used white ones. They all give the same problem.

  • Msi k8n neo2 problems everywhere

    I could write a list with all the problems this board has:
    Hangs booting when detecting ide devices
    Doesn't recognize cdrom drive or hdd randomly
    All pci and 1394/Realtek networking are dead
    Impossible to install xp on sata drive: "error loading os" sinstem hangs
    Can't go back to previous bios version
    Maybe it is a great quality board but It doesn't pay off if I have to go through all this problems.

    Quote
    Originally posted by Galvin
    I could write a list with all the problems this board has:
    Hangs booting when detecting ide devices
    Doesn't recognize cdrom drive or hdd randomly
    All pci and 1394/Realtek networking are dead
    Impossible to install xp on sata drive: "error loading os" sinstem hangs
    Can't go back to previous bios version
    Maybe it is a great quality board but It doesn't pay off if I have to go through all this problems.
    Usual advice applies, have you tried running it outside of the case incase it is shorting out on something?
    There is a good guide here on how to setup the bios for the Neo/Neo2
    http://forums.pcper.com/showindex.php?t=340342
    Good luck with your problems, I know what a bummer it can be when your expectations are high and they are not met....
    let us know how you get on

  • MSI K8N Neo2 problems

    This is all so wierd for me. Recently I have had the wierdest problems with my system and K8. I had a system failure and had to format and install everything. After I formatted, I had a number of problems getting my stuff installed again and getting the whole system in general order. One of my problems that I have is that I cannot install the nvidia GART driver in the nforce driver package, without rendering my system unbootable. This is really strange, and that didn't happen before the system failure. Also, on the nvidia video card main menu my system bus is listed as PCIx0 instead of AGP 8x. Is that related at all to the fact that I get terrible PC lag when playing WoW, or not? What gives? 
    Thanks.

    Yeah, I can either have the GART driver or the display driver installed seperately, but when both installed I cannot get into windows. Does anybody else have this problem? 
    Could the fact that I have Norton Internet Securities fully on have anything to do with it? Perhaps it's blocking some files being installed which leads to me not being able to boot up? It's probably not, but I am desperate to fix this problem. Please help me. 
    Edit:
    I have been thinking about it some. Maybe I should just reformat and see if that fixes the problem. What does everybody else think?

  • Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

    I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
    It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
    Here are the details of my system:
    MSI K8N Neo2 Platinum (BIOS 1.B)
    Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
    2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
    Asus Radeon AX800 Pro (256 MB)
    PSU Antec Sonata 380W
    HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
    HDD Seagate 250Gb SATA (ST3200822AS)
    HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
    Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
    BenQ DW1640 DVD-Writer ATA (Sec Slave)
    P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

    Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
    Now I've contacted Maxtor for (hopefully) a new firmware.
    Quote from: rogueUK on 31-July-06, 16:55:42
    insego please use the SEARCH BUTTON
    I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
    Quote
    Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
    Maybe in retrospect I should first have tried the solutions in other topics.

  • MSI K8N NEO4-F SATA ISSUE

    System Specs:
    MSI K8N NEO4-F
    x2 512mb Corsair Xtra Low Latency 2-2-2-5
    VisionTek x850XT
    Creative Audigy 2 Platinum w/ Live Drive
    (1) WD Raptor 10k rpm 74gb (SATA)
    (1) Maxtor 300gb (SATA)
    (1) Maxtor 200gb (IDE)
    (1) Samsung 52x32x52 Burner
    Windows XP Pro
    Recently built system but I'm having SATA performance trouble. Let's start from the boot process. Sometimes when booting, the system will hang while detecting drives, and not detect my 300GB sata drive. A simple reset will sometimes fix this. If allowed to continue to boot, a blue windows XP error screen briefly flashes and the system reboots itself. Going into the bios and trying to autodetect the drive causes a long hang and no detection.
    Moving into windows if everything seems to detect alright, sometimes the 300GB drive seems to function perfectly well, and for as long as my system stays up. Other times I'll go to open some sort of media on the drive (like video), and it will run rediculously slow, skipping and barely running.
    I tried replacing the SATA cables, thinking that maybe they were bent too much or perhaps just bad, but after replacing them the problem seems to persist. This problem at first seemed confined to the 300GB, but my last boot to windows was crawling and anything i opened didnt respond, as the OS is housed on the raptor. So now it seems both drives are capable of this problem.
    Does anyone have any incite?

    Hi mjc2264,
    It's the series 10 300gb maxtors that have been giving pps some issues not just with msi but all AMD64 Nvidia chipsets, its unusual to have Maxtor9 ?? give problems.
    A number of things you might try:-
    1) Bios Standard Cmos Features  try changing the Access Mode for your 300Gb to Large instead of Auto.
    2) Detection is sometimes Worse due to the Pata channel issues. If using the Nvidia IDE Drivers ensure your
     Maxtor 200gb (IDE)
     Samsung 52x32x52 Burner
    are Jumpered explicitly as Master/Slave the NV drivers don't like CS (cable select). Ideally have 200gb on IDE1 & Samsung on ide 2.
    3) If 2) gives no change Or if you feel the need    Roll back The IDE drivers & try the MS Default ones
    Click update driver on the Nvidia Pata driver tab in properties.
    Choose install from a specific location
    Select dont choose , i will choose the driver
    Then select standard dual channel pci controller which is the XP 1
    4) If Windows detects problems with drive access r/w errors it downgrades the drive access mode. If you have been having issues check in device manager IDE Ata/Atapi Controllers Right click properties on each tab & check access mode it s/be Serial ATA DMA for SATA & I think Ultra DMA 5 (or 6??) for Pata HD. If you find any down graded  Set them back & XP will ask to reboot.
    Luck

  • K8N Diamond Silicon Image SATA problem

    Hi everyone,
    I have a problem with my Silicon Image controller,
    when I installed WinXP and tried to install drivers for the
    Silicon Image controller (in SATA mode) it don't exept
    Silicon Image SiI 3132 SATALink Driver 1.0.0.9.
    The only drivers Win exept is RAID drivers. But then I can't use them because
    I dont use RAID array.
    I have tried to update the BIOS without any luck.
    Is it the MB thats is broken or is it Win that has f***ed up?
    My specs:
    AMD Athlon 64 3700+
    MSI K8N Diamond
    4x Kingston HyperX 512MB DDR PC4000 CL3 (3-4-4-8-1)
    HIS Radeon X850XT PE 256MB VIVO
    1x WD Raptor 36GB 10000RPM
    1x Maxtor DiaMax Plus9 120GB
    1x Maxtor DiaMax Plus10 300GB
    1x WD Caviar SE 250GB
    3x Maxtor MaXLine Plus II 250GB
    (all SATA HDD)
    Creative Labs SoundBlaster Audigy 4 Pro
    Plextor PX-716A DVD-R/RW/DL
    Windows XP SP2
    Zalman Reserator 1

    On K8N Diamond the Sil3132 is a Raid5 controller. You can only install Raid5 driver (SataLink and SataRaid drivers don't work, only SataRaid5).
    Use the latest driver version 1.2.3.1. You can download it from MSI.
    If you don't use Raid, then you must go into the Silicon Image bios setup utility (CTRL+S or F4, when displayed) and set for each drive a JBOD array (Create Array -> JBOD).
    (On newer bios JBOD has changed to CONCATENATION.)

  • Msi k8n neo plat problems

    I have built 2 computers exactly the same.
    msi k8n neo plat
    512 corsair xms ddr 3200
    8og sata maxtor
    amd 64 3200
    128mb ati 9800 pro
    asus cd drive
    When i tried to install windows xp pro on both the machines i got the same error. could not copy file. On each try the file was a different one. After hours of trying new things i found that putting the memory in slot 2 on the motherboard  solved the problem, windows installed and booted up as norm. When i moved the memory back to slot 1 the computer would not boot.
    I have now left the memory in slot 2 but the computer will still crash every hour.
    I am sure this is something to do with the memory but not sure what the problem is.
    Can anyone help.

    Can anybody tell me what i should set the cpu fsb frequency to in the bios.
    I just read this in the faq
    What is the fsb speed of this cpu?
    Depending on which FSB you are asking about: The Athlon 64's have the memory controller built in (which was previously part of the Northbridge on the motherboard) which uses up to 200MHz DDR Memory (400MHz FSB) The HyperTransport link from the CPU to the rest of the motherboard runs up to 800MHz. Just to expand on my answer... The HT link is 800MHz, but it's 16 bit in size (2 bytes worth of data per clock) the total bandwidth of the HyperTransport link is 3.2GB in total - 1.6GB sending data to CPU and 1.6GB receiving data from CPU.

  • Maxtor 6Y160MOSTD 160GB DiamondMax Plus 9 SATA/150 -- on -- MSI K8N Neo4 Plat...

    Hello there... I have a Maxtor 6Y160MOSTD 160GB DiamondMax Plus 9 SATA/150 on my MSI K8N Neo4 Platinum. I've had this problem before but it wasn't important enough to report until now.
    I have the latest BIOS (1.B)
    Now... I did have a dual boot - XP and Fedora Core... then I decided since Linux would only install the base text system, to get rid of it. I formatted using Windows disk manager. BUT the GRUB MBR was still on there. It resulted in an error. So I took my winXP disk and popped it in. I tried to first repair the MBR. I used the command BOOTCFG DEFAULT. that didn't work. So without thinking I decided to reinstall XP all together. When It got to the restart, the GRUB was still there, therefore didn't boot.  Well what I ended up doing is trying the repair again. Used the command FIXBOOT - didin't work. I tried agian. Repair - found the command FIXMBR DUH! So I ran that and it recognized that the original MBR had been replaced. So I fixed the MBR and rebooted. XP wanted to install. So I let it. I came back some time later and found out it was stuck on "Initializing Devices...". At first I thought it was the graphics card. b/c linux had problems before probing the graphics card. I decided out of the blue to swap my 160GB HDD for a smaller PATA 2.1GB HDD and installed XP seemlessly. The obvious reason: XP couldn't detect the hard drive. The reason this is confusing is because I installed XP before on my HDD and no problems. I tried figeting with the chords, switching SATA slots. No luck. I really wanna know whats up with that. Help PLEASE.
    Did I leave some info out?

    Have you tried to download the Firmware for your HDD? Maybe you can refer to this site ==> https://forum-en.msi.com/index.php?action=profile;u=77029 

  • Problems with 64 3200+ on MSI k8n neo platinum.

    AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
    MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
    Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
    Okey here it comes..
    I installed everything and all seemed to work okey,  until i threw in the XP install cd and began my install..
    in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and  the install moves on,  this accurs 4-5 times and then it gives me a BIG  "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
    I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
    changed hdd, change gfx-card. change psu,  removed all no-need pci-cards..
    but still same error, i aint no expert so i might have missed something in bios or something :(
    please help me if you can..

    Flashing bios with memory errors is a veeeeery bad idea .
    Almost guarantied to ruin your bios chip with bad data block.
    That this even is suggested with mem errors , well .
    You need to resolve the mem errors before doing anything else.
    The windows xp install routine is a very heavy user of cpu and memory
    and will fail if you have mem errors like you have.
    Some things to try is entering bios and change auto settings on cpu voltage
    giving it 0.5v more than default .
    Set the memorys voltage to vendors max approved voltage
    which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
    Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
    Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
    Disconnect all devices not needed for a windows install ,things can be added later.
    Have only the hd that os is to be installed to , one cdrom , floppy , memory and
    gfx card .
    Disconnect USB case front connector (cause corruption and strange faults if
    USBOC pin is connected)

  • MSI K8N Neo Platinum & Crucial Ballistix 512MB RAM Problem

    I have had MSI K8N Neo Platinum and 1x Crucial Ballistix 512MB RAM for 11 months.
    I have had 1x Crucial Ballistix 512MB RAM for 2.5 months, for a total of two.
    I have had MSI GeForce 6600GT (NX6600GT-VTD) 128MB AGP for 1 month.
    For about 1.5 to 2 weeks, I have been seeing random crashes while playing PC games.
    I started a thread on the Hard OCP forums a few days ago.  I did not know MSI had forums =)
    Rather than re-typing, I may as well just post the link:
    http://www.hardforum.com/showthread.php?t=934956
    My issue is also similar to this one:
    https://forum-en.msi.com/index.php?topic=83799.0
    Thanks for the help.

    ALL RIGHT, after almost    FOUR    months my issue is FINALLY    resolved.
    It is amazing how much time passes when you are hesitant to buy parts unless you are 95% sure it will fix the problem.
    OK, here is an update as to what I remember.
    I went to BIOS 1.4 and tried many different physical and BIOS RAM configurations (Different seating, different number of DIMMs, different RAM timings, voltages, etc).
    I concluded that I could not make my PC 100% stable, but I could get it darn close.  With certain settings, such as DDR400, 2-2-2-6, 1T, 2.80V, Aggressive Timing enabled, Memtest failed test #5 every time (this is spec for my RAM).  With other settings, such as DDR333, 2.5-3-3-7, 2T, Auto V, Aggressive Timing enabled, Memtest failed test #5 maybe once out of 5000.
    I also concluded that the RAM voltage and Aggressive Timing setting was having a big impact.  Some settings would not work (failed Memtest) with RAM at 2.80V but would work with RAM at Auto V.  Some settings would not work (failed Memtest) with Aggressive Timing enabled but would work with it disabled.
    Finally, I started to occasionally get R,G,R,G (Processor Initialization) on the D-Bracket upon cold-start & warm-start, which suggests a PSU issue:
    https://forum-en.msi.com/index.php?topic=76972.msg542545#msg542545
    That pushed me over the top, and I decided to buy a new PSU (TG-480-U22) and a new SATA HDD (WD2500KS) just because.
    Problem solved.  Thanks for all the help.
    I will continue to buy MSI in the future just because of these forums…and a good product of course!

  • MSI K8N Neo Platinum with Vapochill Case problems - Help anyone. :)

    Hi all,
    Had a bit of a tricky problem and as Im new to this board I have no idea what could be causing this.
    First all all system specs:
    Athlon 64 3700+ Clawhammer
    MSI K8N Neo Platinum -
    1 gig Corsair XMS ProL Low Latency Ram (2 x 512mb)
    Nvidia Gefore 6600GT
    1 x WD Raptor 10000rpm HD
    NEC 2500a DVD writer.
    Eye-T 550w PSU.
    Vapochill SE Case with installed Vapochill Phase change cooling.
    Here are photos of it in its present state, you will notice that it isnt installed in the case at the moment.
    The reason for that is because the two wont work together and I want them to so so bad...
    So, hopefully someone here can save the day for me - here goes.
    I have tested the Motherboard and all other componants outside of the case and everything runs smoothly and there are no problems what so ever, great.
    I have also retested the Vapochill case with another motherboard and that also works without a hitch.
    The problem comes when I insall the MSI board into the system, all hooked with a really basic setup, PSU, Case cooling, CPU and Ram. Flick the on switch on the power suply and the system turns on for around 1/2 a second then turns off again. I found this strange because it soundnt come on at all until I press the power button.
    If I press the power button the same thing will happen over and over.
    I have tried a different powersupply and this does nothing at all.
    I have checked for shorts and there is no possible way it is shorting on anything.
    I have a fan plugged in where the CPU fan would go and this doesnt help.
    I have taken it back out and tested it again and it still works ok.
    Does this sound familiar to anyone? Are there any secret Bio's menu's that would have an option that would solve this?
    Any help would be greatly appreciated.
    Glenn

    When you are running the MoBo standalone, what are you connecting to the Power, Reset, HDD, etc. pins ?  Are you using the wires from the Vapochill case, or something else ?  It looks like a single cable with an intermittent switch (red/white cable).  I once had a similar sort of problem and it was because I hadn't connected up (the incredibly fiddly) cables correctly.  Other than that, I would have gone for a short of some sort - but you have checked that already, so . . . .
    As to the system starting to power-up when you switch on the PSU, I wouldn't worry too much about this.  It seems to happen from time to time with some of my systems - amongst other things, the BIOS can be set to resume to previous state after a power-fail.

  • Msi K8N and possible directx problem

    Hi guys,
    System
    MSI K8N Neo Platinum
    AMD 64 3200
    Enermax 600w (2*12V rails, one at 18, the other at 17)
    WinXP, Dx9c
    Other system components 1xSeagate 80gb SATA, 1xLiteon dvd/cd-r
    512Mb Kingston Ram (1 stick)
    Used MSI Live to update board bios to latest as well as nVidia chipset drivers.
    Asus Geforce4 Ti4200 128mb
    Doom3 runs without a hitch,
    UT2004, Everquest both are displaying serious graphical problems including missing textures, shearing, alot of  flickering
    Dxdiag performs all tests without any errors, have yet to try 3dmark.
    Tried changing AGP to 4x and disabling fast write, together and seperatly, graphical concerns only seemed to worsen.
    I have already upgraded to the PSU mentioned above as the Antec that i was using wasnt up to the task, this allowed the 3d games to actually run.
    So, any ideas on what I should be trying next? It seems that Open GL games are performing normally, whereas directX games are causing trouble.
    Josh.

    Thanks vlovich,
    I have tried the nvidia drivers v61.76  and 61.77 and also tried the beta v62.11 and v62.20.
    I have not oc'ed the video card at all, tho winXP is reporting it as running at 8xagp in the device manager applet. When i modified the agp speed in the bios to 4x the problems "seemed" to get worse so I put the setting back to auto.
    I haven't attempted the asus drivers, so I will give those a go.
    Josh.

  • Bluetooth problem with msi K8N Neo4-54G

    I buy a msi K8N Neo4-54G and it was said on the box : "MSI Dual-Net Card (World First 802.11g+Bluetooth on single PCI Card)"
    dont find any driver or something for bluetooth, but Wi-Fi work perfectly.
    I hope someone know how to fix that problem.
    thanks for your help

    Quote from: crazy on 05-January-06, 16:07:28
    You may firstly clear cmos and load defaults in the bios, and if it is available, please attach us a picture of the screen which the issue occurred when you hit enter during the its detecting the SATA hard disk. I am a little confused about what you said. Please tell me what changes have you made before the issue took place. I just want to help, so do many other people. But please firstly give us more detailed information.
    I did it and nothing! Should I restore the original bios version that came with the mother?
    I'll explain the problem: You enter BIOS, go to the disk properties (where says LBA, LARGE, CYLINDERS, HEAD, etc) and hit enter, usually the screen goes blue and shows a line at the bottom of the screen (they are like triangles pointing downside) and 2 seconds after everithing comes back showing the data of the disk ok? Well, now it hangs forever in the "triangles pointing downside" part and I have to restart the machine...
    Does this belongs to the issue of the K8n neo4 platinum with the maxtor hdd's ??? The mobo is malfunctioning?
    Please helpppp! Thanks!

Maybe you are looking for