MSI K8N TV tuner card gives blank screen?

Now besides other problems, My TV tuner card, that has and still does , run perfectly normal in every other board I have. Abit KV8, KV8-Pro, and NF7S, gives me black blank screen after watching it for more than 5 minutes. I have never had any such problems before. I have read all support at Hauppage and found no mention of this problem.
When I take it out of this board and put it into another machine, it works perfect.
Help please.
MSI K8N Neo MS-7030
1.4 Bios
Radeon 9800
Corsair 3200XL and tried Muchkin Special222
Maxtor Diamond Plus
Hauppage TV Tuner Card
Win XP-Pro
All normal updates etc, graphics drivers, DX9c
Never had this many problems with a Mobo since using cheapo Elite MB.

I have been seeing some amazing video using my msi TV-Tuner card (older card) and HDTV S-video inputs from my digital HDTV cable box. I understand what SteveK is saying about how S-video is not capable of displaying 1080i, but dang it looks awesome using dscaler. I did some searching and this guys says:
A better solution is S-video. Almost all players have s-video output. S-video looks much better than composite video, and only slightly inferior to component video. Hook an s-video cable from the player to the display (or to an A/V receiver that can switch s-video). The round, 4-pin connectors may be labelled Y/C, s-video, or S-VHS.
Link found here: http://www.home-theater-faq.com/whats_the_difference_between_composite_s-video_component_and_rgb_video.htm
Anyway I found some similar links that said about the same. In any case, if anyone wants to play with the HDTV viewing using dscaler and an HDTV s-video connection, it might be of interest.

Similar Messages

Startx & gdm give blank screen

I'd like to get GNOME installed for a GUI environment. Proving difficult. Anybody have any idea how to help me?
typing "startx" gives blank screen
setting "systemctl enable gdm" gives blank screen after boot
setting "systemctl start gdm" gives blank screen
I installed brand new Arch (2014.10.01) following the wiki step by step. Everything worked okay. So I set out to get gnome installed.
To install gnome, I installed:
xorg-server
xorg-xinit
xf86-video-intel
libva-intel-driver
libva
lib32-mesa-libgl (after uncommenting pacman.conf)
gnome (with all 1-40)
I tried adding "exec gnome-session" to the ~./xinitrc file and then rebooting but this did nothing.
Did I miss installing something? Some file need configuring?
By the way, how do I get internet at boot automatically without having to type "dhcpcd <ethernet-adapter-name here>" after every boot?

bzpnbx wrote:
I'd like to get GNOME installed for a GUI environment. Proving difficult. Anybody have any idea how to help me?
typing "startx" gives blank screen
setting "systemctl enable gdm" gives blank screen after boot
setting "systemctl start gdm" gives blank screen
I installed brand new Arch (2014.10.01) following the wiki step by step. Everything worked okay. So I set out to get gnome installed.
To install gnome, I installed:
xorg-server
xorg-xinit
xf86-video-intel
libva-intel-driver
libva
lib32-mesa-libgl (after uncommenting pacman.conf)
gnome (with all 1-40)
I tried adding "exec gnome-session" to the ~./xinitrc file and then rebooting but this did nothing.
Did I miss installing something? Some file need configuring?
By the way, how do I get internet at boot automatically without having to type "dhcpcd <ethernet-adapter-name here>" after every boot?
Not sure how to fix it, but you should need the base install, xorg-server, gnome, and I usually include the option xorg-server-utils but that shouldn't be needed?
At that point you should be able to enable/start GDM and if everything goes good it will work. Obviously not your case, I just say this to point out that so far your not wrong...
No idea on that one, but first I would be looking at making sure I had the right video drivers for xorg (see the xorg wiki page about identifying video card with 'lspci | grep -e VGA -e 3D' ), and look up the logs to see what X is actually doing and if its running and just outputing to the wrong display or if there are errors, ect...
Internet kind depends on how/what your trying to do, however in your case the most normal thing would likely be to install network manager, then you will probably also have to download a gnome network manager applet (I think its network-manager-applet)
This will give you the normal system tray icon to manage your network manager settings.
With only a command line I typically prefer wifi-menu for ease.

After iOS7 upgrade, iTunes only gives blank screens. And Netflix won't load. Any idea on what to do?

After iOS7 upgrade, iTunes only gives blank screens. And Netflix won't load. Any idea on what to do?

Yep. I did some more poking around and found that one. Downloaded it and tried to run it and got more errors. Did some more searching and found a fix for the installer on Vista. Ran the fix and tried the ipod software again. It got further, but then hung up again. I'm still trying to figure this all out. Anyone got any answers it'd be much appreciated.

GE60 Wont Boot and F3 Recovery gives blank screen

Hi,
I purchased a MSI GE60 yesterday. On the second reboot the system said it was updating the system and during this time, the laptop went into sleep mode. Now every time I power up the laptop one of 2 things happens.
1) it gives me the MSI logo and the spinner for about 20 minutes then says it is repairing windows. Gets to about 6% after about a further 20 minutes and then turns off.
2) it gives me the MSI logo and the spinner for about 10 minutes and then powers off
In both cases the Blue Turbo light stays on all the time.
I have tried using the F3 Recovery. I get the MSI Logo and the spinner and a message saying it is preparing to repair windows. This lasts for about 10 seconds and then I get a blank screen. The screen stays blank for about 15 -20 minutes and then the laptop powers down.
Does anyone have any advice about how I can get the system recovery to work.

Quote from: prestondocks on 03-August-13, 22:27:05
Hi,
I purchased a MSI GE60 yesterday. On the second reboot the system said it was updating the system and during this time, the laptop went into sleep mode. Now every time I power up the laptop one of 2 things happens.
1) it gives me the MSI logo and the spinner for about 20 minutes then says it is repairing windows. Gets to about 6% after about a further 20 minutes and then turns off.
2) it gives me the MSI logo and the spinner for about 10 minutes and then powers off
In both cases the Blue Turbo light stays on all the time.
I have tried using the F3 Recovery. I get the MSI Logo and the spinner and a message saying it is preparing to repair windows. This lasts for about 10 seconds and then I get a blank screen. The screen stays blank for about 15 -20 minutes and then the laptop powers down.
Does anyone have any advice about how I can get the system recovery to work.
Hi!
I have a GE60 2oc and had the same problem and found out that it is because the notebook is delivered with nearly 30 language packs and at each restart windows remove 1 (ONE) language pack. I.e. it takes 30 restarts to get rid of all the unused language packs.
If you run lpksetup as administrator you can delete the language packs you do not need. However it do take a lot of time to do, but you get rid of them in one go!
Kurt

Clicking Google search results in a frame gives blank screen

The back story to this is that i use Firefox and I use a simple frames home page where my fave links(ebay,craigslist links mainly) are on the left frame of the screen and google opens up on the right frame. When I do a search with google it does what it does and gives me its search results. Normally when i click on one of the Google results the frame on the left stays and the right side goes to the link i clicked on. Not today though. All I get is a blank screen and Done in the status bar. The left frame is still there. This occurs on 2 computers. IE does not have a problem. Is it Google? Firefox? Or a combo of both?
Here's the code for my main frames page. I dont need to include the 2nd one.
1.htm
== This happened ==
Not sure how often
== May 25th, 2010

On this forum you need to use the HTML entity '''&lt;''' for "'''<'''" and '''&gt;''' for "'''>'''".
Use the CODE button after you have selected the text to put the text in a CODE block
A good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the MozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25

Msi k8n neo plat nforce3 250gb : blue screen

hi
just built a amd 64 3400 with msi k8n neo plat: with xfx 256 geforce nvidia graphic n kinston 512 ddr 400.
but for some reason its giving the blue scree with dumping memory msg on the screen.changes the memory but still got the same problem updated the bios to 1.5 still same thing.
any cue with the problem.
thnks

System restore? You need to find out what's causing the problem and you have too many things connected to it to be able to figure out what it is, always start with a basic system - video, primary hard disk, cd + fdd, no more and nothing else connected. Then when something goes wrong along the way you'll have more chance of narrowing it down if the problem appears.
What you'll want to do now is disable/uninstall/unplug any additional non-system-critical components that you have connected to it such as extra usb slots, printers, scanners and anything else. Keyboard, mouse, video with no sound and see if the problem persists. If it does, try another video driver. If it's fixed then reconnect/enable one device and try again until the problem reappears and you can find out what's causing it -- unless you can speed read that message quickly before it shuts down
Now that I think of it, have you set the OS to not automatically reboot on any errors? That might keep the BSOD up there so you can note it down and hopefully point at the problem instead of going through all the above hassle ^^

ACE 4710 Device Manager Gives Blank Screen

Hi Guys,
Wish somebody could share his/her experience on this.
I have a problem with ACE4710 Device Manager that after entering username and password, it will appear just a blank screen. And it happen also to the FT peer.
I know that the workaround is to reload the ACE (as it happened one time before) but I wish somebody could share a better or probably permanent solution to this problem.
Thank you in advance guys.
Tomy.

CSCsv95366: Device Manager displays a blank page after login
Upgrade to A3(2.2) or beyond.
Gilles.

Transaction launcher gives blank screen

Hii All
I have configured a TL to launch Tx. - crmd_order(CRM) but it displays a blank screen.
I have already tried the following (by referring to SDN posts) :-
1. Notes 1620007 and 1521043 are already implemented in our system.
2. Maintained proper URL in CRMS_IC_CROSS_SYS. It is wokring fine when opened directly in IE.
3. Activated and tested the relevant ITS services (SICF).
4. In sicf service, the SAP implementation area is selected as "Signature Design" ( from the posts i found that if thevalue is "Netweaver Classic" then the blank screen issue comes).
5. Executed the report to publish ITS services : SIAC_PUBLISH_ALL_INTERNAL.
6. Executed BOR object in swo1. It is wokring fine.
But it still displays the blank screen. Please suggest some solution or the step which I am missing.
Thanks in advance.
Shafali

Hi Shafali,
You can find the detailed steps of implementation here:
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true]
Regards
Leon

Air SDK version 15.0.0.249 gives blank screen

Hi Guys,
I really need your help.
I have been working on an Air ios app for the last months. I have build the app with 14.0.0.137 and that seems to work fine.
However today i upgraded to 15.0.0.249 and still it works fine in the Flash CC IDE.
But when I install in on an device the app installs allright but when I run the app all it shows me is a blank/white screen !
Any help is greatly appriciated..I am totally lost here.
Thanks in advance.
/Henry

If you read this long thread:
Need to submit iPad app today [HELP]
you'll see how you can get the command line that Flash Pro uses.
Back to your main issue here, what happens if you do a debug test movie, onto the device? Generally you only get blank screens if a script error happens, and doing a debug test might show what line is failing.

Problem with airport extreme card intall -- blank screen

Hi,
I saw that someone else had this problem, but by iBook G4 is listed under the compatible macs.
when I install the card & start-up, the computer starts but the screen is black. (take out the card and the computer works normally).
I've tried updating the software but no change.
any idea why?

You are not inserting the card correctly or possibly a faulty card.
iFelix

Full Screen gives blank screen

Hi,
When I click the Display Full Screen button on any site, such as YouTube, I get a full blank white screen, and still have the audio playing. Pressing Esc returns to regular display. How can I get the Full Screen to work?
I have:
XP
IE8
Flash Player 10.2
Thanks,
Mike

Hi mikeytexas, I love it!! You solved your own problem. Great advice by the way
Glad you posted and especially your solution!!!
Regards,
eidnolb

MSI k8n neo4 platinum hangs in post screen with saitek eclipse keyboard

I've had my board for almost a year now, with no problems, well almost. I had a problem with Raid 0 but we won't go there now. I just purchased a Saitek Eclipse illuminated keyboard to replace my old Microsoft Internet pro. The Microsoft board is PS2 and the Eclipse is USB. I noticed that when I removed the Microsoft keyboard and plugged in the eclipse that when I rebooted, it took almost 4 minutes for the windows splash screen to start. With the PS2 board plugged in my boot time was less than 2 minutes. I've looked at just about everything, and this includes Saitek support who are at a total loss on this problem to. So I went to google and low and behold it lead me to here. I've read a lot of post about keyboard problems,but they tended to be ps2 related. This is a USB issue. The old keyboard still gets my system up in no time flat. Can anybody shed some light on this issue cause it's driving me crazy!!!! I still have my microsoft optical mouse hooked up until my Logitech G5 gets here, in a couple of days. I have not had any other isuues with USB connections, that includes a Nostromo game pad, printer , joystick and card reader.
Mike

Welll I'm screwed now. I tried all of the things you guys recommended, everything was cool. I decided to check my bios version through live update. I had 1.50 and live update had 1.90 ready to go, so I proceeded to flash the bios using the windows method. This included making a recovery disk. Well it flashed ok, everything seemed to go well up to the point where it said to restart the system. This is were it goes bad. Upon reboot my screen was black, not even tinted slightly and my system never came back. I can't even get it to eat the recovery floppy. I have Corsair twinx memory with the fancy LEDS and they just stay on the first two lights. I can't even get the Cd drive to take the mobo disk. It's late and I'm titally bumed, I knwo I won't get to sleep tonight....... I know I have to shitcan this mobo now and totally restart all over...............thanks for the replies on the lousy keyboard problem , at this point I wish I never even bought it.
Sleepless in Vermont tonight

Turning on iMac gives blank screen and green light switches to yellow blink

i recently received one of the older iMac's (torquise color) from my girlfriends work and was told it worked but whenever i turn it on the screen just stays black and the power light is green for a few seconds then goes to yellow and blinks a few times then back to green and repeats its self, any ideas of what could be wrong? if more info needed on iMac model let me know. all help is appreciated. thank you! -Jeff

If the display stays dark, it could be a problem with your iMac's analog video board. This is the component that powers and provides the high voltage needed to drive the CRT display. If it becomes faulty, the iMac does not pass the initial power-up self test. It is the most common failure for CRT iMacs.
Your symptoms are a bit different. I have not heard of the button going back to green and repeating the cycle.
Does this iMac G3 have a slot-loading optical drive, or a tray-loading drive? "Turquoise" makes it sound like the original ("Bondi Blue") tray-loader. It would be helpful to know, since the older tray-loaders are completely different in internal design from the newer slot-loaders.

MSI K8N NEO PLATINUM BlueScreen Issue! Help!

I'm having an issue with my MSI K8N NEO i get the blue screens occasionally.. A friend of mine says its a IDE driver issue.. LMK Here are the system specifications.
MSI K8N NEO PLATINUM
ATHLON64 3000+ @2.01 (stock)
SAMSUNG 512MB PC3200 CAS 2.5
PNY MX440 64MB DDR AGP8X
MAXTOR DIAMONDPLUS MAX 8 40GB, 7200RPM SLIM
300W GENERIC PS
LMK whats wrong if you have ideas, i dont know if you have sufficient information to come up with a conclusion.. im not too sure whats going on either.. But A friend of mine is getting exact same issues he says its IDE conflicts.. now when the Blue screen comes up it doesnt stay long enough to give a moment to read it.. lmk if you have ideas thx..

which drivers are you using?
Right click MY computer -> properties -> Advance -> start up and recovery -> system failure -> uncheck "automatically restart"
this way it will stop at the blue screen and get an stop error number
Or view the error log
Help and support -> Pick a Task ->Use Tools to view your computer information and diagnose problems ->under Tools -> my computer Information-> View Advanced System Information -> View error log
it shows all errors by date migh provide you error numbers ie. 0x000008e

Tv tuner card into a standard dell pc??

Ive bought an MSI, pci, tv tuner card for a mega pc,from komplett.ie ( part no 120172) not ever hearing of a 'mega pc' before now. Put the card into a pci slot in my dell pc and installed the software on the cd supplied all fine.
Now I find that nothing tunes in and on seeking tech help am told that 'mega pcs' are not the same as pc's. And looking at the manufacturers website the information given on this product is slim to none. Is there a way to get this to work on my pc i.e. any software that will enable this seeing as its a pci card.
Im running win XP sp2 .
Id appretiate any help or advise anyone can offer on this.
Thanks.

welcome to the world of MSI!
although this tuner card (MS8606-40) was designed with the Mega PC in mind (which itself is just a small form factor barebones) it is the same as the MSI TV@nywhere Master card (MS8606-10) but without the added FM radio tuner chip and remote controller, so I imagine it should work with it
you might be better off having a browse through the TV@nywhere forum and seeing if any posts there might help you, first thing i suggest you do is download and install the BETA drivers in my sticky post

MSI K8N TV tuner card gives blank screen?

Similar Messages

Maybe you are looking for