MSI K8T Neo 2 may be unavaliable, is there anything else?

I really want to purchase to MSI K8T Neo 2 but unfortunately the shop I was getting it from gets it from Australia and they don't have an ETA on when it will be avaliable again. There are 4 more shops in New Zealand listing it, but thats all.
Is there a different board I should consider?
I would prefer to stick with MSI.
According to some reviews tha VIA K8T800 Pro was marginally faster than the Nforce 3 in games...
So is the Nforce 3 board from MSI a good choice? Good drivers/stability etc?

Quote from: Ui30 on 24-June-05, 17:34:28
nForce is not more stable then VIA, absolutely not.
When you prefer stability, go with VIA chip
when you want a good overclicker with some stability isues, go for the nForce.
My advice: see my signature and you know .....
What sort of stability issues are we talking about here?
BSOD's?

Similar Messages

[Athlon64] MSI K8T NEO-V : incompatibility with ATI RADEON 9800 PRO

Hi,
I read all the subjets on this forum about Radeon problems with MSI K8T NEO motherboard. Most of the peple can't use their graphic card in all situations.
My PC is :
-MSI K8T NEO-V
-AMD-64 3200
-Power : 400W
-ATI RADEON 9800 PRO
-1 Go DDRAM (2x512 in single channel)
-Hercules Digifires 7.1
I bought a new MSI K8T NEO-V with AMD 64.
The problem is that I can't use the computer in the games with AGP 8X even if I try to enable-disable all the options possibles in BIOS and Windows (fast write ...) : The computer freeze (screen disapear as if there was no video signal), reboot or return to Windows disabling the accelerated mode.
But in AGP 4X, all the game run without problem with all setups of BIOS !!!
I tried all the drivers (the new and the old drivers). Even if all are updated, it freeze.
There are no BIOS update for my motherboard. I saw that some people had BIOS update for compatibility with some Radeon cards ...
So, I don't know how to repair the problem because AGP 8X is AGP 8X and not 4X, and my Radeon run fine on other computer, and nothing say that Radeon 9800 pro don't run on this motherboard.
Does someone have the solution to make it work ? Does a new BIOS or driver update exist somewhere for Radeon cards ?

What Bas said about 30+ amps on the 12v rail does have merit. Even if you don't use it now there may come a time when you want to upgrade the system and certainly you won't want to buy yet another PSU then. A High end vid card now takes almost as much as the CPU to operate. Now days the 12v rail is the most important. Past systems regulated everything off the 5v railk and 12v was used mostly for powering drive motors. Now though the MB's use the 12v line to regulate all the voltages for the CPU, Chipset and other features as does the Vid cards. 3.3 volt lines are used for memory so we hardly use any 5v nowdays.
You have an older viod card and that does not eat much 12v but if you upgrade the most likely peice will be the vid card. You could go through this whole thing all over again if you are not careful to plan for that now with a new PSU purchase.
If the computer shop gives you a bunch of bull about power needs havbe them stop by the forum and we can help set them straight on this. There is more than enough data from MSI and historical data here that suggests that 16a on the 12v rail is certainly not enough. Hey I am not trying to sell you anything. I am just trying to help you get it right. The computer shop is the one trying to sell you something we just feel they are selling the wrong junk.

Msi k8t neo fis2r problems part 3

sometimes when the computer is turned on it just turns the fans and leds on but doesnt boot up...
most of the time it loads up and i boot to the windows xp cd and i install the drivers for sata and then when it reaches the point of copying the files it will give me a bsod and say that there is a problem with the irql driver and then force me to shut the pc down..
sometimes it makes it past that and will begin to copy files onto the hard drive, like somehow the data is becoming corrupted..however it will start to say that the files cant copy randomly and it will allow me to retry..they will copy the 2nd time usually..i can keep hitting retry and it will usually go by..it gets to 30 something % and then crashes to bsod just giving me some random error..for some reason the files keep screwing up that go on the sata drive....I just replaced the old power supply that wasnt working with an antec true watt 430 watt power supply, so i know it isnt that..
i just cant figure out what the heck is going on..any help would be appreciated.my specs are
"IRQ NOT EQUAL OR LESS"
athlon 64 3000+ cpu
msi k8t neo fis2r motherboard
mushkin special cas 2.0 2-2-2-5 512 mb pc 3200
western digital 8mb cache 80 gb sata hard drive
sapphire radeon 9800 pro 128 mb 8x agp

fyi look an your cd sticker ity will show power, consumption, but they are way lower than you would think, hard drives,can be only 10 watts, less then some case lights , and fans, cd are similar.. your video, is the biggy somewhere between 90~150 watts..yikes .next to the cpu..and the mobo can use 50 or so (not sure about new mobos) not to mention the ram 1024 is @40 watts or so., dont forget about 25watts per pci card, not counting the sound card which can be double....
ergo the need for a big psu..
the combined total ratting on a psu is not the max number that the psu is rated, that is surge value.. so a 500 may only hold 400 sustained , and that will drop as the machine heats up, so in the end your 500 may onlyy pull 366 @50'c...

MSI K8T-NEO won't post from a cold boot

Alrighty here is my strange problem. I have my system connected to a surge protector powerstip. When I power my machine down I also shut off the powerstrip which cuts wall power off from the machine. When I turn the power back on the and then fire up the computer every single time it will not POST on the first try. The drive lights cd-roms come on but the HD's never start. So I hold the power button in for 6 seconds, then hit it a second time, and it boots every time. Shutting down and restarting is no problem, so long as the power is never disconnected from the system.
Here is my configuration
MSI K8T NEO Bios version 1.2
Athlon 64 3200+ not overclocked
1 512meg stick of Geil Ultra PC3200 slot 1
1 512meg stick of Coarsair XMS3200 slot 2
memory is running at 333mhz 2-3-3-7 all setting are set to auto
Radeon 9500 in the AGP slot
Sound Blaster Audigy
Promise 100 TX4 Raid controller
2 WD 80 gig SE HD's connected to promise controller
1 Pioneer PD-115 16X DVD drive
1 Liteon 411-s I believe 4x DVD Writer
1 Zip Drive
Using AMD boxed CPU fan
Powered by an Antec true 430 +3.3V 28A +5V 36A +12V 20A
According to core center +3.3 is at 3.31V, +5V is at 5.03V, +12V is at 11.76V
So anyway its prime stable etc. But when ever the system has been powered off, and unplugged the first time I power on it always fails to post with the d-link indicator lights indicating a CPU failure. Hold down the power button and it reboots. Power the machine off, but don't disconnect wall power powers back on just fine.
This is strange, since I use the surge protector to turn off speakers, etc! Its also annoying, I used to have a MSI K7D-L Master 2xXP CPU's with the same hardware witht eh exception of the Geil RAM, and of course cpu, and mobo and never had any problems with a cold boot. any suggestions?

Yeah I tried having only one stick of ram in the machine, and it hangs on a cold boot when its been unplugged/or powersupply switched off. Reboot again and no problems. I tried just having the geil installed, and the corsair stick installed same problem. I have ordered a second Geil Ultra PC3200 stick so I'll have matched sticks and will be able to run at 400mhz FSB. The lack of a manual memory speed setting overide in the bios is frustrating. Yes I know the speed is more or less set by the CPU but there must be some override mechinism if you can slow it down....
I have also tried with just a video card installed, and one stick of ram to see if the problem would go away. No GO. One thing to mention is I had a Radeon 9700pro that I got from new egg refurbed that I had to send back becasue the card would not power on when the system was booted, unless you disconnected the power lead got the warning message, and then powered off and reconnected the power lead. Possibly this card may have damaged something else? OR the mobo was bad and damaged the card? The mobo was new, the ram (geil), CPU, and 9700pro were all refurbs. Everything else was from a previous dual processor system and was working fine.
Both of the Western digitals are set as masters and each are on their own seperate ide channels. The Promise FastTrack100 TX4, has 4 IDE channels and the HD's are connect to channel 1 and channel 2 on the FastTrack controller.
Specifically what happens is if the power has been off, I turn the power on, hit the power button. Lights come on, the cd-rom drives lights start blinking, fans come on, and I hear this kinda of poping sound out of the speakers like the kind of sound you get when you first power on the machine but it happens a second time about 2 seconds after powering on the machine, and it just sits in this kind of hung up state, hitting the reset button does nothing. Then I power off power back on and it POSTS, and back to normal. So long as the system is never disconnected from the power source while it is off, it will power back on the first time. This is really strange I've never had a system do this before. I'm beginning to wonder if I just have a bad/faulty board and ought to RMA it?

MSI K8T NEO motherboard installtion diagram/instructions?

I am just putting my system togther
MSI K8T NEO FIS2R
Athlon64 3200+
2 X 512 MB OCZ EL pc 3200 memory + other stuff:
ANTEC TruePOwer 480 PS
LianLi 6089 case
I have never attached a mother board to a case before. There are no installtion diagrams that comes with the motherboard (or the case for that matter). Is the motherboard supposed to be screwed directly onto the case?
There is also a small bag with 2 items : one looks like a blasck plastic riser, about 1 inch high.It has the word LOTES embossed into it. The other is a faceplate with
2 1" x 1/2inch rectangular cutouts on the silvered side, and a square cutout, with a silver stripe down the midlle on the otherside which looks like aa beige plastic.
Are there any web accesible diagrams to show how this should be attached to the case?
Does anyone know what the black plastiic and metal plastic things with the cutouts are supposed to do?
Thanks.

Hi
This is a very expensive piece of gear for a first try, be very careful not to touch the board without first grounding yourself on the case, you really need a strap from your wrist fixed to case to clear static. There should be a packet of screws with the case, the brass posts screw onto back of case and the board fits onto them. Most cases are marked with the correct holes marked for type of board. the metal plate is for the back of case, you will have to remove the existing plate and replace it with this one to match with the outlets on board, The black plastic/metal riser sounds like the interference suppressor ring that goes over the wires going to front panel. The setting up of this board, fitting the CPU and Cooler, etc, should be left to someone who knows the way to fit it. Your local Computer shop may know someone to show you how it goes, or if you give an area where you are, some kind person on this list might help.

MSI K8T Neo D-Bracket Early Initialization

Hi,
I recently put togther my computer
-msi k8t neo fisr
-athlon 64 3200
-thermaltake xaser II case
-hardcano II
-thermaltake xaser III 480w power supply
-thermaltake silent boost k8 fan and heatsink
-2x 512 corsair xms 3200 v1.1 cl2
-samsung 16x dvd rom
-ati radeon 9700 pro /w zalman heatsink
Im kinda newbie at making computers(only my second time making a comp)
For some reason my computer hangs at early chipset initialization nothing shows up on screen, when i take out everything my computer beeps 3 times in intervals and still hangs on early initiliaztion.When i just put my memory in, the beeps stop but comp still hangs at early intialization.Anyone got any ideas?Could it be i installed my cpu wrong? bad video card?Or could it be i put in the pins wrong? Well thnx for looking and i appreciate any help.
Thnx

We have seen this happen alot in the P4 Forum, As There seems to be numerous Members that are having some compatability issues with the ATI-9700, Pro, and Non Pro VPU's . Someone Contacted ATI Tech. Support Directely and recieved this Response >> Dated Dec 24, 2003 at 01:10 PM reply
Hi David,
This video card has a know problem with the some of the MSI manufactured motherboards. It seems that the Boards involved are the VIA series, and the INTEL i865PE series. The only ATI cards that work have to have a serial # with -30 at the end or higher or they will not work. Because this card is discontinued our supplier cannot gaurantee a -30 card as a replacement. We can only exchange for a different item within the first 15 days so the only thing I can suggest is to see if you have a friend that may want to buy the card as there is probably nothing wrong with it and then buy another one. Any of the new 9600 or 9800 series don't have this problem. If you have any other questions let me know. Thanks alot.
Ryan S. Senior Tech. ATI Canada
I hope that this is Not the case with your Board. And now we have also seen that this compatability issue is NOT Just limited to the i865PE's as I have seen Threads involving both the SIS 655 and the INTEL i875P MSI Boards also.
I have also recieved word that some of the Rev.1-A 9700 Boards were also only 4 Layer PCB's, Not the Normal 5 Layer, and this is Leading to the Graphic Cards NOT Making Good Contact in the AGP Slot. And I have Read that this can be somewhat remedied by trying to (Gently) Making sure that the Card is inserted Completely into the Slot, also try (Again very gently) wiggling the Card back, and forth, to help establish better contact with the cards Gold Fingers, and the slot itself........I dont know, check and see if your Card is one of the -30 Cards, or look in SANDRA, and Under "Information Module", select "PCI, AGP, Card Reader" and Check AGP, and see what the Rev. is for your Card if it has the (A_1) then it may be a Thin one , I know; sounds rediculous, does'nt it? Sorry I could not Be of Any more assistance........Let us know.........SEAN REILLY875

[Athlon64] MSI K8T Neo FSR / Early Chipset Initialization

Hi There,
My MSI K8N Neo Platinum has a broken LAN interface, i don't have the papers of it so I can't send it for RMA. So i bought a MSI K8T Neo FSR.
But there is a problem, when i power up the system, the fans are spinning, the hard disk spins up and the CDRW/DVDROM drives are working. The only thing the system does is hanging at the "Early Chipset Initialization" state accoding to the D-Bracket.
- Tried an other VGA Card > No result (Radeon 9200, Club3D)
- Bought other memory (I do have 1GB now , but still no result)
- Tried resetting the BIOS > No result
- Tried removing the RAM, the system beeps there's no RAM in the system, but when i put it back in the system wouldn't boot again.
- Tried to boot up only with R9200, CPU and RAM, and still it won't work.
- Tried to boot outside the case, but still no result.
I tried my processor, memory, PSU and vga card (6800LE) back in my K8N system and it works great, so i don't think my PSU is too weak.
And I aint thinking that my motherboard is broke, it still beeps without memory in it.
I am getting really confused, i'm out of money now so i can't buy some new stuff.
Anyone ideas?
Specs in signature. (PSU 18A @ 12V), sorry for my bad english.

Quote from: fafner on 03-May-05, 20:55:16
Why don't you get a PCI network card for the K8N system? No need to fuss around with a new mb just to get a LAN connection.
Don't want to use PCI-Cards
Quote
Have you tried removing the RAM and then doing a Bios reset? Sometimes things get sticky if the RAM is still in place during a Bios reset.
I would also unplug anything that is not entirely needed to boot so you can simplify the problem.
Another hint. As the RAM controller is inside the CPU the system will not do anything right without RAM. The CPU will imediately hang.
Just tried a BIOS reset without RAM in the system, the system won't boot. Only the CPU, VGA card and the memory is placed. Only the 4pin 12v and the 20 pin is connected.
It just won't work, maybe the board is dead?

FAQ for MSI K8T NEO

Is there a FAQ for the MSI K8T NEO motherboard?
About 3 years ago I build a computer using the ABIT KT7Raid Mbd.
Although I had the ABIT manuals I found that wasn't enough to guide
me thru setting up the board, installing the OS, and downloading
all the correct drivers. Fortunately there was a very extensive FAQ
(written by Paul Howland) that had all this information and more.
I just bought a MSI K8T with a Athlon 64-3000 CPU and I am in
the same boat. I have the MSI manual but it doesn't lead me thru
the steps for installing WinXP and making sure I've got all the
latest drivers. Is there such a FAQ, or has it gotten so easy that
a FAQ is no longer required? (Like maybe WinXP already has all
the drivers required?)
Thanks
~Paul

do you have a SATA or normal IDE heard drive?
if SATA, you need to press F6 at the start of windows xp install to install the SATA drivers, depending on which controller you hooked the hard drive up to (promise or VIA)
thats about it really...
everything else is on the CD, then you can use live update to get the latest drivers and bios.

[Athlon64] TV tuner problems on MSI k8t neo

Hello,
I used TV@nywhere Master. Since beginning it worked.
After graphic card reclamation (MSI GeForce 6800 LE) I tried another graphic cards (at first Legend 64 [1 MB, PCI], later Riva TNT 2 vanta [16 MB, AGP], GeForce 5600 VIVO [128 MB, AGP]). With this Legend graphic card at first my PC beeps for a while, but Windows XP started (even without graphic drivers). I tried another graphic cards (with correct graphic drivers), but since then there was no video on my TV tuner (channels were recognized, sound was possible to hear, but only black screen). I got new GeForce 6800 LE card, but the problem was the same also with this card.
I reinstalled windows XP several times, but always with the same behavior.
Maybe similar as it is mentioned here:
https://forum-en.msi.com/index.php?topic=27537.msg158205#msg158205 (TV@nywhere Master sound but only black picture.)
I tested TV tuner at my friend's PC and it worked, so TV tuner is not broken.
So I bought new TV tuner card (Sapphire theatrix 550), but this card was not even detected under Windows device manager.
When I tried to install ATI drivers, I got BSOD and my PC was restarted.
(there was no problem at my friend's PC [athlon xp 2200, nforce 2 chipset])
Is it problem with PCI slots of my motherboard?
My system:
MSI k8t neo (k8t800 chipset)
Athlon 64-3000+
512 MB DDR
MSI GeForce 6800 LE
Windows XP SP2

Just to note:
there was also problem with network (not detected).
Reclamation was necessary.
There was no similar problem with returned motheboard.

Calling all old MSI K8T Neo-FIS2R users

Ops i posted this in the wrong forum first time, this is the right place
This for all MSI K8T Neo-FIS2R users, that have changed to the new MSI K8N Platinum nForce3 250 mobo, if I have the chance to swap to the new board should I do so, or does this mobo have its fair share of problems?
Is the MSI K8N Platinum nForce3 250, a better board compared to the old MSI K8T Neo-FIS2R? Not taking into account overclocking.
Like is the onboard sound the same or worse or better in your opinion? Is it any faster at stock? Are there any other advantages?
Thx Xe

I had a K8T Neo Fis2r at first. I got a K8N Neo because I believed my Blue Screens were a faulty K8T Neo. As it turned out, the Audigy2 I had in there was the problem, because I still got Blue Screens with the K8N Neo, and when I took out the audigy and used onboard my system ran stable.
I havent had any of the apparent keyboard controller problems, or ANY other problems with the K8N. My only instabilities have been the Audigy2's fault.
Havent tried overclocking on the K8N Neo yet, maybe a little down the road. As far as features go, the K8N has the hardware firewall on it (which I dont use) but apparently its "true" gigabit ethernet is better than the K8Ts. Dont ask me to clarify that, lol
btw Got my turtle beach Santa Cruz today and put it in my K8N Neo, crossing my fingers... =\

MSI K8T Neo - Video switch off, sound glitches

Hi
First post, and im hoping someone can PLEASE help me.
Im currently using the following:
MSI K8T Neo FISR-2 Mobo (pretty sure thats it)
64 AMD 3200+
512 DDR @ 333
2 IDE HDs
GEXCUBE 9600XT etc etc
Now problem 1) I use my computer for work alot, i.e I use Microsoft word, and im typing away getting alot of work done when all of a sudden, blank screen, it acts like i havent touched anything and just powered down the monitor, but no matter what i do i cant get it back up and thus i have to reboot. (This occurs after around 15 odd minutes of work on word)
-Ive tried everything i can think of, updated whatever, even taken to computer places and they have no idea, rebooted CMOS, havent update BIOS cause im scared but if you got any ideas let me know
Problem 2) not as bad as the first but my sound, using onboard AC97 and Logitech Z640s i have this weird static shitty background scrathcy noise which is annoying, and i cant get it cleared up.
-Tried updating drivers etc, sounds not maxed out, even get the sound when i switch off the speakers and plug in my headphonse so...
If you can help on either of these things please either reply here or email me on [email protected]
THANKYOU!!!

For ATI related monitor signal loss issues, check here:
Rage3D forum direct link
I personally have a AIW9600Pro and haven't experience the aforementioned problems, so I don't know what to add, but I'm sure these folks at Rage3D forums can help. It's already upto 15 pages, so there must be some useful info in there...
For statics, I find that by turning off Mic Gain (or sometimes called Mic Boost) from your Windows Volume control sometimes does the trick. If you use extension cables, you might want to check for interference, too.
Hope this helps,
David

Motherboard Monitor settings for MSI K8T Neo-FIS2R

I'm new to motherboard monitor and there are no predefined settings available for the MSI K8T Neo-FIS2R.
Anyone help me with the appropriate settings to monitor temps and fans?

Lunchbox,
Yeah I can do that - but I'm not confident of the settings or readings. For example - the CPU temp Is only sort of correct if I set it to sensor Winbond 2 2N3904. But after displaying what I believe is correct for a few seconds it changes to something ridiculous like 7C. I've tried all the other board sensors listed and they either say my CPU temp is 118C or 7C. System temp seems to work, but again I'm not sure. Hence my post here.
It is also odd that CoreCenter and MBM disagree about a few things. Like the +12.00 rail Corecenter says 12.00v and MBM says 12.22V. Or Fan 1 that is easly 2X what corecenter says.
And if you run CoreCenter WHILE running MBM all kinds of wierdness happens - like CPU temp fluctutating wildly or CPU fan speed synchronizing and then not.
Plus clock speed is a consistent 2001 with CC and 1998 with MBM.
So I want someone who knows what they are doing to do the configs - clearly that's not me.

Problems with OC in MSI K8T Neo FIS2R!!!

Hi!
I have faced problems when making OC in my Athlon 64 3400+. I do not obtain to increase the FSB for 213Mhz more than without that they occur stopped or reset. I am using 1Gb (2x512) of Ram (Corsair CMX 3200LL PRO).
In the internet many stories exist that chip VIA K8T800 is not good for OC, because the AGP/PCI cannot be stopped with fixed values.
Exists some form to obtain with stability in this Mobo one overclock descent, with FSB of at least 220Mhz? The lack of stability in overclock limits the processor very, what it finishes in forcing to who knows to abandon the K8T Neo, passing to a Mobo that uses Nforce3 250, for example.
If somebody will be able to help with tips to try one overclock for FSB in 220mhz with stability would be very grateful, friends!
my system
Athlon 64 3400+ (cooler venus 12)
MSI K8T Neo FIS2R
1Gb Ram (512x2) Corsair CMX 3200LL PRO
ATI Radeon 9800XT 256Mb
120Gb SATA Maxtor 8mb buffer
Audigy 2
420W Thermaltalke
Case Lanfire Thermaltalke
Monitor LG Flatron 17 700P
CD/RW+DVD
LAN (adsl 400k) + Fax Moden (56k)

Take your sata drive off and you can overclock higher. There is no PCI/AGP lock so the speeds are affecting your sata drive. 210 mhz. system clock is about the limit before the sata drives start to act up.
The problem is with that particular VIA chipset. No way around it has been found to work in a practical manner.

[Athlon64] MSI K8T Neo FIS2R BIOS Update when? CnQ no workie!

The MSI K8T Neo FIS2R (MS-6702) hasn't had a BIOS update since 3-4-2005!
I put a Sempron 64 3000+ in my motherboard, and was very disappointed that it is recognized as an "AMD Unknown Processor". Sure, it works, but one of the reasons I bought it is in the hopes of getting AMD Cool n Quiet to work. However, apparently the AMD driver can't recognize the CPU due to the old BIOS on the motherboard.
Every other MSI skt 754 board supports Sempron E6 revision already. Why not the K8T Neo FIS2R? Where have all the MSI BIOS programmers gone? I have been waiting 2-months for a BIOS update to support the E6 Semprons. I have asked and begged MSI Tech Support. I am tempted to switch to ASUS or some other company that is actually timely with BIOS updates. Only reason I haven't yet, is this board is everything I want EXCEPT for Cool n Quiet not working. It's starting to look like there is no BIOS update in sight, so I am very disappointed.
Anyone here work for MSI can confirm there are no plans for a BIOS update? Because I don't want to wait around for something that's not going to happen.

Sorry, I didn't mean to imply I thought the mods here are MSI staff... I was just kind of hoping there's MSI staff lurking here, seeing what people think of their products or seeing what people complain about.
No, pretty much C 'n Q is the only reason I'm disappointed, but it was something I was really set on getting to work since this is a server that's up 24/7, but isn't utilized but maybe 4hrs out of a given day. I could reduce frequency and voltage, but unlike C 'n Q, it won't automatically increase speed and voltage based on demand - which is something I want since although it's a server, I also use it as a regular PC as well.
I've even tried the 2.33 beta BIOS with no change, and even found a 5.52 BIOS in their BIOS testing directory. I guess that BIOS was for a different kind of 6702, although I had pulled out the peripheral modules with AMI's MMTOOL and they looked the same as the existing BIOS, but that BIOS killed my motherboard so it couldn't have been for a regular 6702. I had to desolder the BIOS chip with a heat gun, reprogram the old BIOS back on it with an EPROM programmer, and solder in a socket. I guess that shows my dedication to get C 'n Q working!

[MSI K8T Neo-FIS2R] 2xCMX512-3200 DDR400 memories (corsair)

I have this motherboard:MSI K8T Neo-FIS2R (MS-6702) and currently i'm using a Kingston memory and the computer runs fine. But i've buyed TWINX1024-3200 (2xCMX512-3200 DDR400) but when I put only this memories the computer after some time or when booting restart suddenly...
Could it be about the bios version, my actual version is v1.0 and I'm using AMI BIOS.
i've runned memtest+ and i get this: http://korpro.org/numb/PICT1348.JPG

I am in almost the exact same situation.
MSI Neo-FIS2R
AMD XP 2800+
2 sticks of DDR400 Corsair XMS memory (CMX512-3200C2) 512mb each (total 1gig)
Any combination of memory together does not allow the motherboard to boot. I get no beeping or warning sounds. Everything powers up but the display remains blank.
Things I have tried in many different combinations:
TRCD = 5, 4, 3, auto
DDR Voltage = Auto, 2.7, 2.65
DDR 200, DDR 300, DDR 333, Auto
Memory in bank 1+2, 1+3, 2+3
Along with those bios setting combinations, I have tried using several bios versions:
v2.2
v2.0
v1.9
v1.8
v1.4 <--- (Stuck with this bios for the moment, since the ami flashing utility HANGS when attempting to erase the boot block in step 2 of flashing procedure for any newer bios.)
As a consequence of several days of trying unsuccessfully to get both sticks of memory to work, I have given up hope on this motherboard.
Why is it so difficult to get two sticks of memory working properly on this motherboard?
Has anyone got another trick or technique or setting I can try that may work?
Alternatives:
Scrap the MSI motherboard -- never buy another piece of MSI crap again.
Buy a single stick of 1gig memory.
Buy a new motherboard from another manufacturer known to work properly -- at the very least not have these memory configuration issues.
Worst motherboard experience I have ever had, unfortunately.

MSI K8T Neo 2 may be unavaliable, is there anything else?

Similar Messages

Maybe you are looking for