MSI K8T NEO Lan Problem

I install XP fresh ones all the time to dry different ways of doing it, but doesn't pick up the LAN for it, Lan is enabled in BIOS and everything, it's just wierd, When i put my Motherboard Driver CD, It doesn't bring up the Realtek Network Drivers.... but get this, I've put a network Card,COZmy onboard lan doesn't want to work, and when i put the cd in, it will pick it up, and show the the drivers to install. BUT I WANT TO USE THE ONBOARD LAN.
I have a VIA K8T800 NOrth Bridge & VT8237 South Birdge Chipsets.
what can be done? the Network is, Realtek 8110c/8110s Dual Layout
Integrated Fast Ethernet MAC and PHY in one chip. I know you'll probably tell me to use the card, but i don't want to :'(
I've tried installing many different drivers. still doesn't work, Need Serious Help.
Regards

What does the device manager say.
What do you mean by not working. Is it installed, is there a conflict, can u ping urself (127.0.0.1).
While ur at it: check the version of the drivers.
Allthough they all should be OK.
You can find the proper drivers here btw:
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=496&kind=1

Similar Messages

Msi k8t neo fis2r problems part 3

sometimes when the computer is turned on it just turns the fans and leds on but doesnt boot up...
most of the time it loads up and i boot to the windows xp cd and i install the drivers for sata and then when it reaches the point of copying the files it will give me a bsod and say that there is a problem with the irql driver and then force me to shut the pc down..
sometimes it makes it past that and will begin to copy files onto the hard drive, like somehow the data is becoming corrupted..however it will start to say that the files cant copy randomly and it will allow me to retry..they will copy the 2nd time usually..i can keep hitting retry and it will usually go by..it gets to 30 something % and then crashes to bsod just giving me some random error..for some reason the files keep screwing up that go on the sata drive....I just replaced the old power supply that wasnt working with an antec true watt 430 watt power supply, so i know it isnt that..
i just cant figure out what the heck is going on..any help would be appreciated.my specs are
"IRQ NOT EQUAL OR LESS"
athlon 64 3000+ cpu
msi k8t neo fis2r motherboard
mushkin special cas 2.0 2-2-2-5 512 mb pc 3200
western digital 8mb cache 80 gb sata hard drive
sapphire radeon 9800 pro 128 mb 8x agp

fyi look an your cd sticker ity will show power, consumption, but they are way lower than you would think, hard drives,can be only 10 watts, less then some case lights , and fans, cd are similar.. your video, is the biggy somewhere between 90~150 watts..yikes .next to the cpu..and the mobo can use 50 or so (not sure about new mobos) not to mention the ram 1024 is @40 watts or so., dont forget about 25watts per pci card, not counting the sound card which can be double....
ergo the need for a big psu..
the combined total ratting on a psu is not the max number that the psu is rated, that is surge value.. so a 500 may only hold 400 sustained , and that will drop as the machine heats up, so in the end your 500 may onlyy pull 366 @50'c...

Problems with OC in MSI K8T Neo FIS2R!!!

Hi!
I have faced problems when making OC in my Athlon 64 3400+. I do not obtain to increase the FSB for 213Mhz more than without that they occur stopped or reset. I am using 1Gb (2x512) of Ram (Corsair CMX 3200LL PRO).
In the internet many stories exist that chip VIA K8T800 is not good for OC, because the AGP/PCI cannot be stopped with fixed values.
Exists some form to obtain with stability in this Mobo one overclock descent, with FSB of at least 220Mhz? The lack of stability in overclock limits the processor very, what it finishes in forcing to who knows to abandon the K8T Neo, passing to a Mobo that uses Nforce3 250, for example.
If somebody will be able to help with tips to try one overclock for FSB in 220mhz with stability would be very grateful, friends!
my system
Athlon 64 3400+ (cooler venus 12)
MSI K8T Neo FIS2R
1Gb Ram (512x2) Corsair CMX 3200LL PRO
ATI Radeon 9800XT 256Mb
120Gb SATA Maxtor 8mb buffer
Audigy 2
420W Thermaltalke
Case Lanfire Thermaltalke
Monitor LG Flatron 17 700P
CD/RW+DVD
LAN (adsl 400k) + Fax Moden (56k)

Take your sata drive off and you can overclock higher. There is no PCI/AGP lock so the speeds are affecting your sata drive. 210 mhz. system clock is about the limit before the sata drives start to act up.
The problem is with that particular VIA chipset. No way around it has been found to work in a practical manner.

[Athlon64] TV tuner problems on MSI k8t neo

Hello,
I used TV@nywhere Master. Since beginning it worked.
After graphic card reclamation (MSI GeForce 6800 LE) I tried another graphic cards (at first Legend 64 [1 MB, PCI], later Riva TNT 2 vanta [16 MB, AGP], GeForce 5600 VIVO [128 MB, AGP]). With this Legend graphic card at first my PC beeps for a while, but Windows XP started (even without graphic drivers). I tried another graphic cards (with correct graphic drivers), but since then there was no video on my TV tuner (channels were recognized, sound was possible to hear, but only black screen). I got new GeForce 6800 LE card, but the problem was the same also with this card.
I reinstalled windows XP several times, but always with the same behavior.
Maybe similar as it is mentioned here:
https://forum-en.msi.com/index.php?topic=27537.msg158205#msg158205 (TV@nywhere Master sound but only black picture.)
I tested TV tuner at my friend's PC and it worked, so TV tuner is not broken.
So I bought new TV tuner card (Sapphire theatrix 550), but this card was not even detected under Windows device manager.
When I tried to install ATI drivers, I got BSOD and my PC was restarted.
(there was no problem at my friend's PC [athlon xp 2200, nforce 2 chipset])
Is it problem with PCI slots of my motherboard?
My system:
MSI k8t neo (k8t800 chipset)
Athlon 64-3000+
512 MB DDR
MSI GeForce 6800 LE
Windows XP SP2

Just to note:
there was also problem with network (not detected).
Reclamation was necessary.
There was no similar problem with returned motheboard.

MSI K8T Neo 2 FISR Memory problems....

Could someone please help me
I have a MSI K8T Neo 2 mobo, with 500w powersupply, AMD 64 3500+, and 4 sticks of 512mb PC3200 ram (not all installed).
2 of my sticks were bought from PC world as PC3200 DDR400 ram.
The other 2 are Nanya 512mb PC3200 DDR400 ram.
I ONLY NEED TO USE 2 OF THESE STICKS.
This motherboard was chosen so that i could run DUAL channel.
However when running memory in slots 1 and 3 as manual suggests, the pc crashes when playing games. If i run 1 stick in slot 1 it happily runs all day long.
I have tried running memory in slots 1 and 2 but only making a frequency of 157.1mhz. See screenshot of CPU-Z:
MY MEMORY CONFIG
Surely this should be 200Mhz?
Basically i can only make 200mhz using a single stick and no joy with dual channel.

Don't know if this will help
You probably already know about this......

AMD64 3200 + MSI K8T Neo FISR2 memory problem

I've had one KVR400X64C25/512 and it have worked like a charm. Now I've bought another one (total 1gb).
When I've inserted it and start the computer I only get the CoreCell logo scren, it do not boot correctly.
AMIBIOS is version 3.21a
I've tried the following:
* run only the new memory [works]
* run only the old memory [works]
* DIMM1 + DIMM3 [only CoreCell screen]
* DIMM1 + DIMM2 [only CoreCell screen]
* DIMM2 + DIMM3 [only a black screen]
what should I do?

Quote from: Tiresmoke on 22-August-05, 21:48:12
A PSU is rated to run at +/-5% and that is well within it's rating. As for wether ists big enough there is no way we can say as you still did not give full system specs.
If it won't run with the third stick of RAM then pull it out for the moment and see if the system will boot again. If it does then during post you will see a Bios version listed. That board only supports Bios versions to 2.2 at the moment so please also list what actuall Bios version you have.
Ok, have booted with one instead of two sticks (one works, two don't, do not have three sticks)..
AMIBIOS A6702VMS v2.2 released 030405. The autodetect settings (at startup): Clock = 400Mhz, CAS 2.5 which seems correct.
More info:
AMD64 3200
MSI K8T Neo FISR2
AMIBIOS A6702VMS v2.2
Seagate 120GB SATA (no ides)
CD rw + DVD-r combo drive
floppy drive
Saphire GF6800 (no GT or Ultra)
Creative Audigy 2 Platinum Ex
that's whats running in it

Msi k8t neo fis2r xp install problem

I tried to install xp on my sata drive..i downloaded the raid drivers and put them on a floppy, it accepts the raid drivers (im not trying to use raid, just regular sata), and i select the hard drive and attempt to install to it, but the files from my xp cd keep saying something about invalid image has been installed to your hard disk (or a similar message to that)
also part of the time the comp will not boot properly, it will just beep on and hang and nothing will show to the monitor, or if i have a disc in my cdrom when i try to turn it on it wont turn on, but then when i take out the disc and reboot the comp it turns on again..no clue what might be going on..
my specs are
a64 3000+
512 mushkin special 2-2-2-5 cas 2.0 ram
80gb WD SATA 8mb cache HD
radeon 9800 pro (sapphire)
MSI K8T NEO FIS2R
sparkle 400 watt power supply

You better get something like an Enermax 465 for your rigg, as yours:
Quote
Output: [email protected]/28A,+5V@40/28.5A,[email protected],+12V@15A,[email protected],+5VSB@2A
Could blow to pieces any minute now....
15A @ 12V is way too light.....
The Enermax has 33 of them

Problem with MSI K8T NEO-FIS2R

When I boot my computer I get a message invalid boot.ini then it says c:\windows and windows starts normaly. What I don't understand is why do I get invalid boot.ini Anyone knos how to fix this?

I'm sorry for no specs. Here you go
MSI K8T NEO-FIS2R
AMD 64 3000+
2X 512MB 400MHz Ceon CL=2,5
HDD 120GB WD
HDD 4GB SEAGATE
CDR DVD-RW NEC ND3520
CDR SONY
400W POWER SUPLY
primary master CDR DVD-RW
primary slave NONE
secondary master CDR SONY
secondary slave HDD 4GB
and last HDD 120GB on primary raid
NONE on secondary
I have ORIGINAL windows xp with sp2 on 120GB HDD. I bought this computer and they put windows xp on my system.

[Athlon64] MSI K8T Neo FSR / Early Chipset Initialization

Hi There,
My MSI K8N Neo Platinum has a broken LAN interface, i don't have the papers of it so I can't send it for RMA. So i bought a MSI K8T Neo FSR.
But there is a problem, when i power up the system, the fans are spinning, the hard disk spins up and the CDRW/DVDROM drives are working. The only thing the system does is hanging at the "Early Chipset Initialization" state accoding to the D-Bracket.
- Tried an other VGA Card > No result (Radeon 9200, Club3D)
- Bought other memory (I do have 1GB now , but still no result)
- Tried resetting the BIOS > No result
- Tried removing the RAM, the system beeps there's no RAM in the system, but when i put it back in the system wouldn't boot again.
- Tried to boot up only with R9200, CPU and RAM, and still it won't work.
- Tried to boot outside the case, but still no result.
I tried my processor, memory, PSU and vga card (6800LE) back in my K8N system and it works great, so i don't think my PSU is too weak.
And I aint thinking that my motherboard is broke, it still beeps without memory in it.
I am getting really confused, i'm out of money now so i can't buy some new stuff.
Anyone ideas?
Specs in signature. (PSU 18A @ 12V), sorry for my bad english.

Quote from: fafner on 03-May-05, 20:55:16
Why don't you get a PCI network card for the K8N system? No need to fuss around with a new mb just to get a LAN connection.
Don't want to use PCI-Cards
Quote
Have you tried removing the RAM and then doing a Bios reset? Sometimes things get sticky if the RAM is still in place during a Bios reset.
I would also unplug anything that is not entirely needed to boot so you can simplify the problem.
Another hint. As the RAM controller is inside the CPU the system will not do anything right without RAM. The CPU will imediately hang.
Just tried a BIOS reset without RAM in the system, the system won't boot. Only the CPU, VGA card and the memory is placed. Only the 4pin 12v and the 20 pin is connected.
It just won't work, maybe the board is dead?

[Athlon64] MSI K8T NEO-V : incompatibility with ATI RADEON 9800 PRO

Hi,
I read all the subjets on this forum about Radeon problems with MSI K8T NEO motherboard. Most of the peple can't use their graphic card in all situations.
My PC is :
-MSI K8T NEO-V
-AMD-64 3200
-Power : 400W
-ATI RADEON 9800 PRO
-1 Go DDRAM (2x512 in single channel)
-Hercules Digifires 7.1
I bought a new MSI K8T NEO-V with AMD 64.
The problem is that I can't use the computer in the games with AGP 8X even if I try to enable-disable all the options possibles in BIOS and Windows (fast write ...) : The computer freeze (screen disapear as if there was no video signal), reboot or return to Windows disabling the accelerated mode.
But in AGP 4X, all the game run without problem with all setups of BIOS !!!
I tried all the drivers (the new and the old drivers). Even if all are updated, it freeze.
There are no BIOS update for my motherboard. I saw that some people had BIOS update for compatibility with some Radeon cards ...
So, I don't know how to repair the problem because AGP 8X is AGP 8X and not 4X, and my Radeon run fine on other computer, and nothing say that Radeon 9800 pro don't run on this motherboard.
Does someone have the solution to make it work ? Does a new BIOS or driver update exist somewhere for Radeon cards ?

What Bas said about 30+ amps on the 12v rail does have merit. Even if you don't use it now there may come a time when you want to upgrade the system and certainly you won't want to buy yet another PSU then. A High end vid card now takes almost as much as the CPU to operate. Now days the 12v rail is the most important. Past systems regulated everything off the 5v railk and 12v was used mostly for powering drive motors. Now though the MB's use the 12v line to regulate all the voltages for the CPU, Chipset and other features as does the Vid cards. 3.3 volt lines are used for memory so we hardly use any 5v nowdays.
You have an older viod card and that does not eat much 12v but if you upgrade the most likely peice will be the vid card. You could go through this whole thing all over again if you are not careful to plan for that now with a new PSU purchase.
If the computer shop gives you a bunch of bull about power needs havbe them stop by the forum and we can help set them straight on this. There is more than enough data from MSI and historical data here that suggests that 16a on the 12v rail is certainly not enough. Hey I am not trying to sell you anything. I am just trying to help you get it right. The computer shop is the one trying to sell you something we just feel they are selling the wrong junk.

K8T NEO FSR problems and questions.

I read this in an article on http://www.hardware.no:
"MSI is one of the companies that offer free upgrade to a new motherboard with better
specifications, if you have bought 915P Neo2 Platinum, 915P Combo-FR or 915G Combo FR
in the period of time between 21st and 27th june."
Late in june, I bought myself MSI K8T Neo-FSR motherboard, and an Athlon 64 3200+2.2GHz.
When I run "Core Center", the program shows that my CPU idle temp is 60 Celsius and my
sys temp is 36 degrees, which is COMPLETELY wrong?!?!.
This is very weird, because I have a nice computer case with 5 fans that blow out all
the warm air inside. When I play games, the CPU goes up to 65 degrees and my computer
restarts. This is VERY annoying. How do you turn this off in BIOS settings?
I'm quite frustrated with the thought that my CPU temp. shows 60-70 Celsius.
I have read tons of other forums and I have found out that it's not only me that experience
this problem. I seriously hope that you will fix this bug ASAP.
Does this offer also apply to K8T NEO-FSR? Can I get a free upgrade?
If I don't get my problems fixed, I will take further actions.
My System specifications:
MSI K8T NEO-FSR, Athlon 64 3200+2.2GHz, Asus Geforce 4 Ti 4400, TwinMOS 1024 DDR3200 RAM, Western digital 80+120+80 GB 7200 RPM, Chieftec BX Tower BX-03SL-SL-SL P4 / AMD, 2x papst 120mm fans, 2x 80mm papst fans, 1 fan in the door of the computer case.

I never heard MSI was doing such an offer...
Anyway, you need the latest BIOS, that solves the temps reading thing, this happens because AMD changed the CPU a bit.
It's not getting that hot, it's just a reading failure.
A BIOS flash should solve it.

MSI K8T NEO FIS2R No VGA help plz!

Hi, ive just purchased a new athlon 3000 64 cpu retail and an msi k8t neo fis2r motherboard, the specs and problem are below but plz bare in mind i am a system builder for the last 3 years i have tried alot of things to solve this.
MSI K8T NEO FIS2R MOBO
AMD 3000 64 RETAIL CPU
AMD RETAIL HSF
1024MB DDR333 SAMSUNG RAM
120 GIG WD HD
GALAXY GLACIER GEFORCE 6800 GT 256MB
PIONEER 106 DVD WRITER
400 WATT PSU (TSUNAMI I THINK)
Anyway the problem is this when i put the system together and turned it on i dont get any vga the monitor just says NO SIGNAL and when i look at the graphics card the fan on it isnt spinning.
Yet i have my old setup which is as follows,
ASUS A7N8X DELUXE MOBO
AMD 3200XP BARTON
AMD HSF
1024MB DDR333 AMSUNG
120 GIG WD HD
GALAXY GLACIER GEFORCE 6800 GT 256MB
PIONEER 106 DVD WRITER
400 WATT PSU
Basically the same as above i just changed the cou and mobo now when the graphics card is in that system it works fine no problems as soon as i try it in the new a64 system it doesnt work the fan doesnt spin and nothing comes on screen, ive tried everything i know ive double and trebble checked connections and ive tried removing components and then trying it, no matter what the graphics wont work.
I figured the motherbaord must be faulty and am going to contact the place i got it from but it would be good if anyone here knows how to solve it if it isnt the motherboards fault.
thanks very much.
ic3man1999.

Thanks guys, huess what like an idiot i forgot to put the 4 pin 12v in :( doh
Anyway it works fine now, but i have high temps core centre says 56 degrees right now while im typing this ? is this accurate or am i in trouble ?
Oh yeah and everytime i load windows it says new hardware found ide channel then secondary ide channel then it says a problem occured during your new hardware installation and it calls the hardware HDC it says this twice aswell.
ANy help guys ?
thanks

Calling all old MSI K8T Neo-FIS2R users

Ops i posted this in the wrong forum first time, this is the right place
This for all MSI K8T Neo-FIS2R users, that have changed to the new MSI K8N Platinum nForce3 250 mobo, if I have the chance to swap to the new board should I do so, or does this mobo have its fair share of problems?
Is the MSI K8N Platinum nForce3 250, a better board compared to the old MSI K8T Neo-FIS2R? Not taking into account overclocking.
Like is the onboard sound the same or worse or better in your opinion? Is it any faster at stock? Are there any other advantages?
Thx Xe

I had a K8T Neo Fis2r at first. I got a K8N Neo because I believed my Blue Screens were a faulty K8T Neo. As it turned out, the Audigy2 I had in there was the problem, because I still got Blue Screens with the K8N Neo, and when I took out the audigy and used onboard my system ran stable.
I havent had any of the apparent keyboard controller problems, or ANY other problems with the K8N. My only instabilities have been the Audigy2's fault.
Havent tried overclocking on the K8N Neo yet, maybe a little down the road. As far as features go, the K8N has the hardware firewall on it (which I dont use) but apparently its "true" gigabit ethernet is better than the K8Ts. Dont ask me to clarify that, lol
btw Got my turtle beach Santa Cruz today and put it in my K8N Neo, crossing my fingers... =\

MSI K8T Neo - Video switch off, sound glitches

Hi
First post, and im hoping someone can PLEASE help me.
Im currently using the following:
MSI K8T Neo FISR-2 Mobo (pretty sure thats it)
64 AMD 3200+
512 DDR @ 333
2 IDE HDs
GEXCUBE 9600XT etc etc
Now problem 1) I use my computer for work alot, i.e I use Microsoft word, and im typing away getting alot of work done when all of a sudden, blank screen, it acts like i havent touched anything and just powered down the monitor, but no matter what i do i cant get it back up and thus i have to reboot. (This occurs after around 15 odd minutes of work on word)
-Ive tried everything i can think of, updated whatever, even taken to computer places and they have no idea, rebooted CMOS, havent update BIOS cause im scared but if you got any ideas let me know
Problem 2) not as bad as the first but my sound, using onboard AC97 and Logitech Z640s i have this weird static shitty background scrathcy noise which is annoying, and i cant get it cleared up.
-Tried updating drivers etc, sounds not maxed out, even get the sound when i switch off the speakers and plug in my headphonse so...
If you can help on either of these things please either reply here or email me on [email protected]
THANKYOU!!!

For ATI related monitor signal loss issues, check here:
Rage3D forum direct link
I personally have a AIW9600Pro and haven't experience the aforementioned problems, so I don't know what to add, but I'm sure these folks at Rage3D forums can help. It's already upto 15 pages, so there must be some useful info in there...
For statics, I find that by turning off Mic Gain (or sometimes called Mic Boost) from your Windows Volume control sometimes does the trick. If you use extension cables, you might want to check for interference, too.
Hope this helps,
David

Will Gainward 6800GT fit my MSI K8T NEO FIS2R?

Horror picture on a ABIT NF7-S
I saw this picture and saw that the card i extremely long!
Anyone here on the forum that can guarantee that my Gainward 6800GT card (with a red gainward cooler) will fit on my MSI K8T NEO FIS2R?
MSI K8T NEO FIS2R
Please?

I think I have found out the problem
Using my old Enermax (350) I was able to boot up the AMD 64 2800 every time but the PSU made this weird electrical sound - I think because it was being overloaded (I think as it doesn't make this sound when used with my XP 1800). I then reverted back to my new X-Pro (460w) and after a few attempts I managed to get the ram module and CPU powered... slowly adding more fans it became harder to boot and eventually the GPU fan wouldn't run once I plugged another fan in... I'm guessing this is because my PSU is too weak to power the juice guzzling AMD
I'll need to break the bank once again I suppose

MSI K8T NEO Lan Problem

Similar Messages

Maybe you are looking for