Msi K8t Neo Series+hard Disk ??

i have a big problem
this is my config
msi k8t neo series
athlon 64 3000+
512 DDR
ide 1 master hardisk 40 Go
ide 1 slave nothing
ide 2 master dvdrw recorder
ide 2 slave hard disk 20 Go
so i want to connect a 3rd hard disk to ide 1 slave but then i connect the disk (Maxtor diamondmax plus 80 Gb ATA 133 normaly working on another PC) no hard disk are detected,  all others drive install in ide 2 are also not detected i have this
ide 1 master hardisk 40 Go
ide 1 nothing
ide 2 nothing
ide 2 nothing
if i connect only this 80 gb hard disk i have nothing detected
ide 1 nothing
ide 1 nothing
ide 2 nothing
ide 2 nothing
so what happen????
please help me, i have even update bios...
(exccus eme for my littlt english, ia m french, and i need help

check the jumper on the c drive
my bet its a wd in stand alone not master
 Moan Guide
list full hardware and psu max amps as well

Similar Messages

  • K8T Neo Series JUSB connecting

    Hello,
    While cleaning op my case, and hiding all cabled to optimize my airflow I accidentally ripped out the connectors of the 2nd JUSB connector on my MSI K8T Neo series Motherboard. I first thougt It was made out of 1 connector, but unfortunatly they were about 10 tiny connectors.
    that JUSB connector is for my front-side USB 2.0 connectors.
    I know how to reconnect them, but I don't know in which order.
    They are all different colors and are labled:
    2x 'GND' each in an other color, 2x 'Power' each in an other color, ....
    I checked my motherboard's  "quick user's guide", about those JUSB connectors, where they gice the correct oreder. My Problem is that the lables in the Manual aren't the same as the labels on the tiny connectors.
    Does anyone has the correct order, maybe in color, so that I can reconnect them in a proper way?
    Thank you very much,
    Hans.

    ...look here...scroll down one post...

  • Does K8T Neo Series SATA ll?

    I have problems with my new Samsung SP 200 4c which my mobo does not find.
    I belive I have to invest in a new mobo which supports Sata - generation 2 (300 instead ogf 150 transfer rate)
    Which mobo to buy? (Socket 754)

    Thank you, blazing storm. After a week of searching for solutions I found
    it on Samsungs HDD support site, where the solution was to use a jumper
    to reset the speed from 3,0 Gb/s to 1,5 Gb/s.  Because my chipset VT 8237
    did'nt support the new HDD's software to run at 1,5 if my mobo did'nt support
    3,0 Gb/s. (MSI K8T Neo serie Socket 754)
    See also: http://www.samsung.com/Products/HardDiskDrive/support/faqs/faqs_20050727_0000180403.htm

  • Installing Hard Drive MSI K8T Neo Motherboard

    Hi Guys,
    Can anyone help! I have been trying to install a brand new Hard Drive om my MSI K8T Neo MS6702 but for some reason the BIOS cant recognize it. Please Help
    Kindest Regards
    Gary

    Moan Guide

  • Msi k8t neo fis2r xp install problem

    I tried to install xp on my sata drive..i downloaded the raid drivers and put them on a floppy, it accepts the raid drivers (im not trying to use raid, just regular sata), and i select the hard drive and attempt to install to it, but the files from my xp cd keep saying something about invalid image has been installed to your hard disk (or a similar message to that)
    also part of the time the comp will not boot properly, it will just beep on and hang and nothing will show to the monitor, or if i have a disc in my cdrom when i try to turn it on it wont turn on, but then when i take out the disc and reboot the comp it turns on again..no clue what might be going on..
    my specs are
    a64 3000+
    512 mushkin special 2-2-2-5 cas 2.0 ram
    80gb WD SATA 8mb cache HD
    radeon 9800 pro (sapphire)
    MSI K8T NEO FIS2R
    sparkle 400 watt power supply

    You better get something like an Enermax 465 for your rigg, as yours:
    Quote
    Output: [email protected]/28A,+5V@40/28.5A,[email protected],+12V@15A,[email protected],+5VSB@2A
    Could blow to pieces any minute now....
    15A @ 12V is way too light.....
    The Enermax has 33 of them

  • [Athlon64] MSI K8T Neo FSR / Early Chipset Initialization

    Hi There,
    My MSI K8N Neo Platinum has a broken LAN interface, i don't have the papers of it so I can't send it for RMA. So i bought a MSI K8T Neo FSR.
    But there is a problem, when i power up the system, the fans are spinning, the hard disk spins up and the CDRW/DVDROM drives are working. The only thing the system does is hanging at the "Early Chipset Initialization" state accoding to the D-Bracket.
    - Tried an other VGA Card > No result (Radeon 9200, Club3D)
    - Bought other memory (I do have 1GB now , but still no result)
    - Tried resetting the BIOS > No result
    - Tried removing the RAM, the system beeps there's no RAM in the system, but when i put it back in the system wouldn't boot again.
    - Tried to boot up only with R9200, CPU and RAM, and still it won't work.
    - Tried to boot outside the case, but still no result.
    I tried my processor, memory, PSU and vga card (6800LE) back in my K8N system and it works great, so i don't think my PSU is too weak.
    And I aint thinking that my motherboard is broke, it still beeps without memory in it.
    I am getting really confused, i'm out of money now so i can't buy some new stuff.
    Anyone ideas?
    Specs in signature. (PSU 18A @ 12V), sorry for my bad english. 

    Quote from: fafner on 03-May-05, 20:55:16
    Why don't you get a PCI network card for the K8N system?  No need to fuss around with a new mb just to get a LAN connection.
    Don't want to use PCI-Cards
    Quote
    Have you tried removing the RAM and then doing a Bios reset? Sometimes things get sticky if the RAM is still in place during a Bios reset.
    I would also unplug anything that is not entirely needed to boot so you can simplify the problem.
    Another hint. As the RAM controller is inside the CPU the system will not do anything right without RAM. The CPU will imediately hang.
    Just tried a BIOS reset without RAM in the system, the system won't boot. Only the CPU, VGA card and the memory is placed. Only the 4pin 12v and the 20 pin is connected.
    It just won't work, maybe the board is dead?

  • How to install a fresh copy of windows xp with sp2 on a msi k8t neo

    My specifications:
    CPU: AMD ATHLON 64 - 3000MHZ
    MOTHERBOARD: MSI K8T NEO
    RAM: CRUCIAL MICRON 1024MB DDR
    HDD: WD 120GB ( C: 60GB, D: 60GB )
    HDD: SEAGATE 4GB ( E: 4GB )
    DVD: NEC 3520
    CD: SONY
    The system is on drive C:
    primary master HDD 4GB ( on drive E: )
    primary slave NONE
    secondary master CDR DVD-RW
    secondary slave CDR SONY
    and last HDD 120GB on primary raid ( on drive C: and D: )
    NONE on secondary
    I have 2 floppy disks: on the first one it says G72-PRSA060, Promise 376/378 Driver, Disk 1 of 1
    on the second one it says G72-VASA040, VIA SATA RAID Driver, For VT6420/VT8237, Disk 1 of 1
    Can please someone tell me how to install a fresh copy of windows xp on my computer from scratch? All I know that I have to press F6 at some time and insert one of the disks but I don't know which one. And I don't know when to insert a second disk.
    Thanks for helping me

    Yeah.  I remember when I had that board.  I found the best SATA ports were the Promise ones, but...
    What do you think, Tiresmoke?  You had the same board too if I'm not mistaken.

  • [Athlon64] MSI K8T NEO-V : incompatibility with ATI RADEON 9800 PRO

    Hi,
    I read all the subjets on this forum about Radeon problems with MSI K8T NEO motherboard.  Most of the peple can't use their graphic card in all situations.
    My PC is :
    -MSI K8T NEO-V
    -AMD-64 3200
    -Power : 400W
    -ATI RADEON 9800 PRO
    -1 Go DDRAM (2x512 in single channel)
    -Hercules Digifires 7.1
    I bought a new MSI K8T NEO-V with AMD 64.
    The problem is that I can't use the computer in the games with AGP 8X even if I try to enable-disable all the options possibles in BIOS and Windows (fast write ...) : The computer freeze (screen disapear as if there was no video signal), reboot or return to Windows disabling the accelerated mode.
    But in AGP 4X, all the game run without problem with all setups of BIOS !!!
    I tried all the drivers (the new and the old drivers).  Even if all are updated, it freeze.
    There are no BIOS update for my motherboard. I saw that some people had BIOS update for compatibility with some Radeon cards ...
    So, I don't know how to repair the problem because AGP 8X is AGP 8X and not 4X, and my Radeon run fine on other computer, and nothing say that Radeon 9800 pro don't run on this motherboard.
    Does someone have the solution to make it work ? Does a new BIOS or driver update exist somewhere for Radeon cards ?

    What Bas said about 30+ amps on the 12v rail does have merit. Even if you don't use it now there may come a time when you want to upgrade the system and certainly you won't want to buy yet another PSU then. A High end vid card now takes almost as much as the CPU to operate. Now days the 12v rail is the most important. Past systems regulated everything off the 5v railk and 12v was used mostly for powering drive motors. Now though the MB's use the 12v line to regulate all the voltages for the CPU, Chipset and other features as does the Vid cards. 3.3 volt lines are used for memory so we hardly use any 5v nowdays.
    You have an older viod card and that does not eat much 12v but if you upgrade the most likely peice will be the vid card. You could go through this whole thing all over again if you are not careful to plan for that now with a new PSU purchase.
    If the computer shop gives you a bunch of bull about power needs havbe them stop by the forum and we can help set them straight on this. There is more than enough data from MSI and historical data here that suggests that 16a on the 12v rail is certainly not enough. Hey I am not trying to sell you anything. I am just trying to help you get it right. The computer shop is the one trying to sell you something we just feel they are selling the wrong junk.

  • FAQ for MSI K8T NEO

    Is there a FAQ for the MSI K8T NEO motherboard?
    About 3 years ago I build a computer using the ABIT KT7Raid Mbd.
    Although I had the ABIT manuals I found that wasn't enough to guide
    me thru setting up the board, installing the OS, and downloading
    all the correct drivers. Fortunately there was a very extensive FAQ
    (written by Paul Howland) that had all this information and more.
    I just bought a MSI K8T with a Athlon 64-3000 CPU and I am in
    the same boat. I have the MSI manual but it doesn't lead me thru
    the steps for installing WinXP and making sure I've got all the
    latest drivers. Is there such a FAQ, or has it gotten so easy that
    a FAQ is no longer required? (Like maybe WinXP already has all
    the drivers required?)
    Thanks
    ~Paul

    do you have a SATA or normal IDE heard drive?
    if SATA, you need to press F6 at the start of windows xp install to install the SATA drivers, depending on which controller you hooked the hard drive up to (promise or VIA)
    thats about it really...
    everything else is on the CD, then you can use live update to get the latest drivers and bios.

  • Msi k8t neo fis2r problems part 3

    sometimes when the computer is turned on it just turns the fans and leds on but doesnt boot up...
    most of the time it loads up and i boot to the windows xp cd and i install the drivers for sata and then when it reaches the point of copying the files it will give me a bsod and say that there is a problem with the irql driver and then force me to shut the pc down..
    sometimes it makes it past that and will begin to copy files onto the hard drive, like somehow the data is becoming corrupted..however it will start to say that the files cant copy randomly and it will allow me to retry..they will copy the 2nd time usually..i can keep hitting retry and it will usually go by..it gets to 30 something % and then crashes to bsod just giving me some random error..for some reason the files keep screwing up that go on the sata drive....I just replaced the old power supply that wasnt working with an antec true watt 430 watt power supply, so i know it isnt that..
    i just cant figure out what the heck is going on..any help would be appreciated.my specs are
    "IRQ NOT EQUAL OR LESS"
    athlon 64 3000+ cpu
    msi k8t neo fis2r motherboard
    mushkin special cas 2.0 2-2-2-5 512 mb pc 3200
    western digital 8mb cache 80 gb sata hard drive
    sapphire radeon 9800 pro 128 mb 8x agp

    fyi look an your cd sticker ity will show power, consumption, but they are way lower than you would think, hard drives,can be only 10 watts, less then some case lights , and fans, cd are  similar.. your video, is the biggy somewhere between 90~150 watts..yikes .next to the cpu..and the mobo can use 50 or so (not sure about new mobos)  not to mention the ram 1024 is @40 watts or so., dont forget about 25watts per pci card, not counting the sound card which can be double....
    ergo the need for a big psu..
    the combined total ratting on a psu is not the max number that the psu is rated, that is surge value.. so a 500 may only hold 400 sustained , and that will drop as the machine heats up, so in the end your 500 may onlyy pull 366 @50'c...

  • Will Gainward 6800GT fit my MSI K8T NEO FIS2R?

    Horror picture on a ABIT NF7-S
    I saw this picture and saw that the card i extremely long!
    Anyone here on the forum that can guarantee that my Gainward 6800GT card (with a red gainward cooler) will fit on my MSI K8T NEO FIS2R?
    MSI K8T NEO FIS2R
    Please?  

    I think I have found out the problem  
    Using my old Enermax (350) I was able to boot up the AMD 64 2800 every time but the PSU made this weird electrical sound - I think because it was being overloaded (I think as it doesn't make this sound when used with my XP 1800). I then reverted back to my new X-Pro (460w) and after a few attempts I managed to get the ram module and CPU powered... slowly adding more fans it became harder to boot and eventually the GPU fan wouldn't run once I plugged another fan in... I'm guessing this is because my PSU is too weak to power the juice guzzling AMD  
    I'll need to break the bank once again I suppose  

  • MSI K8T Neo - System & Application crash/reboot

    Windows XP Pro, SP 1
    MSI K8T Neo-FIS2R Via K8T800 Athlon 64
    AMD Athlon 64 3200+ Processor
    Corsair CMX512-3200C2PT 512MB DDR400 PC3200 XMS X (2)
    ATI Radeon 9800 Pro
    REVOLUTION 7.1 PCI SURROUND
    VANTEC ION VAN-400B (400W) Serial ATA
    Running the CL @ 2.5 and the other timings are set to auto via the BIOS. Ran Microsoft memory diagnostic all last night and got over 120 passes successfully. Problems have occurred when playing fairly intensive video games, e.g. Blade & Sword. Sometimes it will just reboot out of nowhere and sometimes the game will immediately stop and I will see just the desktop. Nothing posts on the Event Viewer for Application or System logs. When the machine reboots it appears to display a memory dump and when you follow the post on the Microsoft site it ascertains that it is a driver issue, yet it is not specific enough to tell you which driver. I have updated all the drivers from MSI and ATI, and am running Cool & Quiet.
    If you know what I might try to do in attempts to fix this please let me know.

    hey thanks for your reply. yes i made sure everything was enabled and i just fixed my own problem. just for the heck on it i called msi tech support [talked to a real smart fella] and he told me that sometimes you need to jumper the drive when your using a single hard drive. i played with it a few minutes and it worked. its installing xp right now. i guess you learn something new everyday.

  • MSI K8T NEO FSR with AMD 64 3200 - Can´t install WIN XP

    Hi.
    I´m writing you because i have a problem with an MSI K8t-Neo FSR.
    The description of my PC:
    MSI K8t-Neo FSR
    AMD 64bits 3200 (640 cache)
    HD 160 SATA Seagate Barracuda
    1gb DDR 400mhz
    Floppy 3 1/2
    CDRW 52x32x52 LG
    Video ATI RADEON 9600 XT
    The problem is the following:
    When I try to install Windows XP, when I press F8 to accept the Terms, it shows me an error message (IO 104 i think) and it hangs up or reboot.
    I tried with another two Proccessors and motherboards (same model obviously) but it didn´t work.
    Could it be a defectuous production serie of that model????
    Or what do you think the problem is????
    Thank you very much for your help.
    I´ll be waiting for your answer!
    Lucas Revale
    PF: I´ve already tried updating the BIOS.

    Thank you all for trying to help me!!!
    I've already tried using only te necesary drivers.
    I´ve also tried another VGA, another HD, another CDRW, another power supply, and an AMD 64 2800+.
    It seems to be that the three motherboards i tried were defectous.
    Does anyone has any other idea?!?!?
    I´d really aprecciate your help!

  • MSI K8T Neo-FIS2R won't power-up

    My MSI K8T Neo-FIS2R won't power up when I switch it on. All that happens is the fans "jolt" a few millimeters and that's it  
    Using an X-Pro 460w which does work as I have tested it on this PC  
    Any help would be greatly appreciated  

    I think I have found out the problem  
    Using my old Enermax (350) I was able to boot up the AMD 64 2800 every time but the PSU made this weird electrical sound - I think because it was being overloaded (I think as it doesn't make this sound when used with my XP 1800). I then reverted back to my new X-Pro (460w) and after a few attempts I managed to get the ram module and CPU powered... slowly adding more fans it became harder to boot and eventually the GPU fan wouldn't run once I plugged another fan in... I'm guessing this is because my PSU is too weak to power the juice guzzling AMD  
    I'll need to break the bank once again I suppose  

  • MSI K8T Neo D-Bracket Early Initialization

    Hi,
    I recently put togther my computer
    -msi k8t neo fisr
    -athlon 64 3200
    -thermaltake xaser II case
    -hardcano II
    -thermaltake xaser III 480w power supply
    -thermaltake silent boost k8 fan and heatsink
    -2x 512 corsair xms 3200 v1.1 cl2
    -samsung 16x dvd rom
    -ati radeon 9700 pro /w zalman heatsink
    Im kinda newbie at making computers(only my second time making a comp)
    For some reason my computer hangs at early chipset initialization nothing shows up on screen, when i take out everything my computer beeps 3 times in intervals and still hangs on early initiliaztion.When i just put my memory in, the beeps stop but comp still hangs at early intialization.Anyone got any ideas?Could it be i installed my cpu wrong? bad video card?Or could it be i put in the pins wrong? Well thnx for looking and i appreciate any help.
    Thnx

    We have seen this happen alot in the P4 Forum, As There seems to be numerous Members that are having some compatability issues with the ATI-9700, Pro, and Non Pro VPU's . Someone Contacted ATI Tech. Support Directely and recieved this Response >> Dated Dec 24, 2003 at 01:10 PM reply
    Hi David,
    This video card has a know problem with the some of the MSI manufactured motherboards. It seems that the Boards involved are the VIA series, and the INTEL i865PE series. The only ATI cards that work have to have a serial # with -30 at the end or higher or they will not work. Because this card is discontinued our supplier cannot gaurantee a -30 card as a replacement. We can only exchange for a different item within the first 15 days so the only thing I can suggest is to see if you have a friend that may want to buy the card as there is probably nothing wrong with it and then buy another one. Any of the new 9600 or 9800 series don't have this problem. If you have any other questions let me know. Thanks alot.
    Ryan S.   Senior Tech. ATI Canada
    I hope that this is Not the case with your Board. And now we have also seen that this compatability issue is NOT Just limited to the i865PE's as I have seen Threads involving both the SIS 655 and the INTEL i875P MSI Boards also.
    I have also recieved word that some of the Rev.1-A 9700 Boards were also only 4 Layer PCB's, Not the Normal 5 Layer, and this is Leading to the Graphic Cards NOT Making Good Contact in the AGP Slot. And I have Read that this can be somewhat remedied by trying to (Gently) Making sure that the Card is inserted Completely into the Slot, also try (Again very gently) wiggling the Card back, and forth, to help establish better contact with the cards Gold Fingers, and the slot itself........I dont know, check and see if your Card is one of the -30 Cards, or look in SANDRA, and Under "Information Module", select "PCI, AGP, Card Reader" and Check AGP, and see what the Rev. is for your Card if it has the (A_1) then it may be a Thin one , I know; sounds rediculous, does'nt it? Sorry I could not Be of Any more assistance........Let us know.........SEAN REILLY875

Maybe you are looking for