MSI K8T Neo2-FIR: No fan control since BIOS 3.3?

Hi!
First my system:
MSI K8T Neo2-FIR (BIOS 3.3)
Athlon64 3000+ Winchester (with Arctic Freezer 64)
Connect3D Radeon 9700 (Zalman Hetapipe)
2x512 MB MDT RAM CL2.5 PC3200 (DIMM1+3)
Terratec Cinergy TV400
PSU Chill Innovation CP-510A (Click for output ratings)
Since BIOS V3.3 Speedfan (V 4.20) is not able to reduce the rpm of the CPU-Fan (of course connected to CFAN1). Before flashing BIOS 3.2, it worked well (CPU

Quote from: Zipfelklatscher on 27-January-05, 16:10:52
Hi!
First my system:
MSI K8T Neo2-FIR (BIOS 3.3)
Athlon64 3000+ Winchester (with Arctic Freezer 64)
Connect3D Radeon 9700 (Zalman Hetapipe)
2x512 MB MDT RAM CL2.5 PC3200 (DIMM1+3)
Terratec Cinergy TV400
PSU Chill Innovation CP-510A (Click for output ratings)
Since BIOS V3.3 Speedfan (V 4.20) is not able to reduce the rpm of the CPU-Fan (of course connected to CFAN1). Before flashing BIOS 3.2, it worked well (CPU < 40°C = Fan spins with 60%). After flashing BIOS 3.3 (because it resolves the problem with USB legacy and WindowsXP), Speedfan (and Corecenter) do not reduce die fan power. If i stay a while in the BIOS, i can hear, how the fan runs lower and lower. But under windows the fan runs on full power.
I have this problem too.
I don't have ability to change speed fan for CPU, and then I have 60 degrees on full load.
When I setup in CoreCenter utility to user mode and fan to high speed, as if by miracle on cpu fan speed change from 1600 to 2400,
but now it's on 1600 again and setup in core center dont't make any change on speed fan.
Is it OK in bios 3.2 ? with setup speed on cpu ?

Similar Messages

Will the MSI K8T Neo2 FIR support what I have?

Well, I bought an abit av8 mobo, hoping to make my new happy computer system.. Turns out, after I built the thing, my happiness ended... I tried basic setup-1 dimm on each bank, nothing, same POST code. So, I RMA'ing the mobo and getting a MSI K8T Neo2 FIR mobo, hoping that it WILL work (a bit more, but worth it). Will it support what I have right now?
1 gig Crucial PC3200 Ballistix
1 WD 74 GB Raptor HDD
1 Maxtor 80 IDE HDD
1 XFX GeForce 6800 (it says minimum is a 300w PSU)
1 Thermaltake 480w Silent Purepower (+12 rail is 18a... mm... ouch...)
1 Thermaltake Venus 12 HSF
1 AMD 3500 Skt 939
1 Nec DVD+RW/-RW DVD burner
1 Mitsumi Floppy Drive
4 CoolerMaster Green LED fans
4 temperature controlled crystal fans
1 Blue LED fan
I think I might have to upgrade the PSU...

Nobody can garantee you that it works you have to pay s.o. to take risk or risk it yourself.
Well I'd just try it, you'll always find a friend that can lend you a stick of ram for a day or two.
I was working in a computer store when I got my rig and I tried 4 different kinds of memory till everything worked perfectly.
I just wanted to warn you, not to frighten you.
Moreover you could check MSIs memory compatibility list....
DO IT :hypecrite:

MSI K8T Neo2-FIR w/ AMD Athlon64 3000 (Venice)

I am looking at purchasing the MSI K8T Neo2-FIR with the AMD Athlon64 3000 (Venice). However, it appears that many have issues with this. I found a link to a MSI german forum that had a beta version of the newest bios but I have a few questions.
Would a german version work if i am living in canada (toronto)?
How can the bios be flashed if it doesnt recognize the cpu?
When will the new bios be released?

Quote from: Ui30 on 08-June-05, 16:36:37
The Venice core will be supported by the K8T neo2 shortly, I'm convinced about that, since Asus (I'm sorry to mention them) are supporting it already, with the same bios.
Even ECS published Venice-ready BIOS updates...
Quote
My advice: just wait a few weeks.
Yepp.
btw: MSI Korea published BIOS 9.14, see http://www.msi-korea.co.kr/program/support/support_dld_detail.php?part=1&serials=61
Michael

With MSI K8T NEO2 FIR Mb (help)

Hi.
I need some help....!
My computer contains:
AMD64 3500+ (130nm, Newcastle) socket 939
MSI K8T NEO2 FIR Hovedkort for S939 K8T800PRO
Kingston PC3200 HyperX DDR 1024MB CL2 Non-ECC Ultra Low Latency (2-2-2-5-1)
Gainward GeForce 6800GT 256MB GS GDDR3 AGP, "Ultra/2400 Golden Sample"
9 X Western Digital HD's
2 X Nec dvd-burning-r
A Gainward psu. (delivers "+3,3=28a" "+5=45a" "+12=20a" and a total of 550W)
I think I have a power problem... because the "+12" has a rather low number for this kind of system... and the BIOS is showing me that the "+12" reading is -- 11,42V -- This is idle in BIOS... and I got the same reading in Win... (idle)
The first thing I thought of was to disable as many disk's/cd-drives as I was able to... the only thing I have left is C: BUT!! the bios and windows gives me the same reading of the "+12" 11,42V.
Both +3,3 and +5 are on the + side.
The main problem is when I ex starts a game or a benchmark prog... Like HL2,battlefield,War3,3dmarks,Prime95 + + + the pc shuts down, or the prog/game won't run properly.... Kind of irritating!!!
Do anybody have any experience with this kind of problem?!?!?! I need help!
I thought of buying the OCZ 520w psu.... Does it solve the problem?
http://www.ocztechnology.com/products/power_management/ocz_powerstream_power_supply
This psu should give me these specs:
520W:
+3.3V(28A)
+5V(40A)
+12V(33A)
Many Thanks for your help!!
regards.
Kris

Prime95 version 23.8.1 is my first choice, I run the torture test in blend mode because it uses lots of ram, very sensitive to errors. Pure math computataions and matched against known results.
I also use Hot Cpu tester Pro 4.2.2, they do have a free version as well it tests alot of different cpu instructions as well as memory simultaniously as well as doing a burn-in. Faster than Prime, nice when your overclocking since you can see what is failing sse instructions for example, then you can either up the cpu voltage or ram voltage depending on the test or back off the oc a bit.Used it alot with my old Barton 2500 rig.
I've seen a third program used on some of the overclocking sites Superpi. I believe, lol, been meaning to bookmark and try it myself. I imagine it's used to quickly detect memory errors as well as being a benchmark without stressing components.
This board isn't made for overclocking kind of useless without a working agp/pci lock. Sata corruption over 220 fsb so I've been content with using the first 2 programs to tweak my memory settings and test for stability.
Yeah I noticed that too when I set the DDR to 400 the bios will override the Cas being set to 2 and run it at 2.5 My board doesn't freeze when saving it though. I leave it set at 2.5 in the bios and use A64Tweaker to manually set the Cas to 2 in windows it works fine that way and is easily verified with cpuz or everest. Personally I don't trust using spd in the bios and prefer to manually set all the timing to the manufacturers recommended settings. *edit* I also forgot to mention to when you check your ram manufacturer's website to see if the sticks of ram are capably of Command Rate 1T(CR) some can't other can only if one stick is being used. You may need to set the Dram 1T timing to disable, sorry about that

S3 sleep state issue (MSI K8T Neo2 FIR)

Hi,
CPU load is too high (about 80-95%) all the time after the system waked up from S3 sleep state. This is dramatically decreasing system performance.
My configuration is:
MSI K8T Neo2 FIR mainboard
CPU Athlon64 3000+ (Venice rev. E6)
AGP GeForce 6600GT VGA card
Creative SB Live! series
WinXP SP2

Wild-Robot,
The following link was suggested to me, since I wondered if my problems might have needed a bios update. The board I have is a 754, thouugh, not a 959, so I would have been suspicious of using this update, anyway. Then Tiresmoke mentioned that the new update addresses a sleep state (S3) issue. Might that help your situation? I would n't know, but it may be worth a look:
MSI Germany published Version 9.3 for K8T Neo2-F(IR):
http://www.msi-computer.de/produkte/main_idx_view.php?Prod_id=402&Seite=BIOS
That Version cannot yet be found at MST TW or MSI USA.
Logged
Board: K8T Neo2-FIR, BIOS 3.30
CPU: Athlon64 3000+, S.939 (Winchester)
RAM: 2x512MB PC3200 CL3 Infineon Orig. (64D64320GU5C) 3.0-3-3-8
VGA: XFX Geforce 6200 AGP8x 256MB, fanless :-)
SND: Terratec DMX Xfire 1024 with Hercules Drivers :-)
HDD: Samsung SP1213N
HDD: Samsung SV1203N
DVD: Liteon LTD-166S
DVD: LG GSA 4163B
PSU: FSP350-60 THN-P (22A@3,3V;21A@5V;10+15A@12V)
Tiresmoke
VIA Freak
Global Moderator
Tiresmoke then mentions:
Well Babblefish translation tells me that this;
Behebt Probleme mit der CPU Auslastung nach dem aufwachen aus dem Standby Modus (S3)
is saying this;
Problems with the CPU extent of utilization repairs after that wakes up from the Standby mode (S3)
So nasically is has something to do with the S3 standby mode issues. As I do not use any standby mode I have not seen any issues. If you have had any then you may want to give it a try but they don't say they fixed anything else so if you are like me and not having any issues you may want to give this one a pass.
Hope that helps.

MOVED: MSI K8T Neo2-FIR w/ AMD Athlon64 3000 (Venice)

This topic has been moved to AMD64 VIA/AMD/ATI based board.
MSI K8T Neo2-FIR w/ AMD Athlon64 3000 (Venice)

Quote from: Ui30 on 08-June-05, 16:36:37
The Venice core will be supported by the K8T neo2 shortly, I'm convinced about that, since Asus (I'm sorry to mention them) are supporting it already, with the same bios.
Even ECS published Venice-ready BIOS updates...
Quote
My advice: just wait a few weeks.
Yepp.
btw: MSI Korea published BIOS 9.14, see http://www.msi-korea.co.kr/program/support/support_dld_detail.php?part=1&serials=61
Michael

MSI K8T Neo2 FIR, need help installing drivers

Hi there,
I need help with installing drivers. Here’s my setup:
CPU: AMD Athlon 64 3500+
Mainbord: MSI K8T Neo2 FIR (VIA K8T800Pro)
OS: Windows XP Professional, SP2 installed
ATI Radeon 9600 Pro
I updated per MSI Live Monitor, but when I run ‘dxdiag’, I says I have to update the ‘VIA standard host bridge’. I don’t know what this is or where it can be found. It could be I saved the updated drivers in the wrong file (F:\ Program Files\...) where F is my primary harddisk and the drivers should be saved in F:\Windows\ System 32.
Also, my hardware setup tells me there are two videocards 'installed': a Radeon 9600 Pro and a radeon 9600 Pro (secundary). Do I need to de-install the secundary one?
Here’s a piece of my most recent dxdiag:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
System Information
Time of this report: 5/22/2005, 10:22:20
Machine name: UIWDC2ARUPUS49X
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: Dutch (Regional Setting: Dutch)
System Manufacturer: MSI
System Model: MS-6702E
BIOS: Version 07.00T
Processor: AMD Athlon(tm) 64 Processor 3500+, MMX, 3DNow, ~2.2GHz
Memory: 1024MB RAM
Page File: 285MB used, 2687MB available
Windows Dir: F:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
Sound Tab 1: No problems found.
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found. DirectPlay test results: The tests were cancelled before completing.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: ATI RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_000217EE&REV_00
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (16 bit) (60Hz)
Monitor: Plug en Play-monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6546 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 5/4/2005 04:28:54, 226816 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n.v.t.
Mini VDD: ati2mtag.sys
Mini VDD Date: 5/4/2005 04:28:34, 1133056 bytes
Device Identifier: {D7B71EE2-0210-11CF-CC6D-0820A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4150
SubSys ID: 0x000217EE
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.
Sound Devices
Description: Sound Blaster Live! 24-bit
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Sound Blaster Live! 24-bit
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
DirectMusic
DLS Path: F:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Sound Blaster Live! 24-bit, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI-mapper (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SoundFont Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: All tests were successful.
DirectInput Devices
Device Name: Muis
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Toetsenbord
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB-hoofdhub
| Vendor/Product ID: 0x1106, 0x3038
| Matching Device ID: usb\root_hub
| Lower Filters: vulfntrs
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:44, 57600 bytes
| Driver: usbd.sys, 9/7/2001 14:00:00, 4736 bytes
Gameport Devices
PS/2 Devices
+ Standaardtoetsenbord (101/102 toetsen) of Microsoft Natural PS/2-toetsenbord
| Matching Device ID: *pnp0303
| Service: i8042prt
| Driver: i8042prt.sys, 8/4/2004 00:55:30, 53760 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ Toestenbordstuurprogramma voor Terminal Server
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ HID-compliant Wheel Mouse
| Vendor/Product ID: 0x046D, 0xC03D
| Matching Device ID: hid\vid_046d&pid_c03d
| Upper Filters: LMouFlt2
| Lower Filters: LHidFlt2
| Service: mouhid
| Driver: mouhid.sys, 9/6/2001 19:04:40, 12288 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
| Driver: LHidFlt2.Sys, 12/17/2003 09:50:00, 25505 bytes
| Driver: LMouFlt2.Sys, 12/17/2003 09:50:00, 70801 bytes
| Driver: Logi_MwX.Exe, 12/17/2003 09:50:00, 19968 bytes
|
+ Stuurprogramma voor muis van Terminal Server
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: The tests were cancelled before completing.
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM1
DirectPlay8 TCP/IP Service Provider: LAN-verbinding 2 - IPv4 -
DirectPlay Voice Codecs
Voxware VR12 1.4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.10 13 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 65.4 GB
Total Space: 76.3 GB
File System: NTFS
Model: ST380011A
Drive: F:
Free Space: 56.7 GB
Total Space: 78.2 GB
File System: NTFS
Model: Maxtor 6Y080L0
Drive: D:
Model: LITE-ON COMBO SOHC-5232K
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
Drive: E:
Model: LG CD-ROM CRD-8521B
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
System Devices
Name: VIA CPU to AGP2.0/AGP3.0 Controller
Device ID: PCI\VEN_1106&DEV_B188&SUBSYS_00000000&REV_00\3&61AAA01&0&08
Driver: F:\WINDOWS\system32\DRIVERS\VIAAGP1.SYS, 5.01.0000.3442 (English), 7/2/2003 04:42:00, 27904 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_7282&SUBSYS_00000000&REV_00\3&61AAA01&0&07
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_4282&SUBSYS_00000000&REV_00\3&61AAA01&0&04
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_3282&SUBSYS_00000000&REV_00\3&61AAA01&0&03
Driver: n/a
Name: VIA Standard PCI to ISA Bridge
Device ID: PCI\VEN_1106&DEV_3227&SUBSYS_00000000&REV_00\3&61AAA01&0&88
Driver: F:\WINDOWS\system32\DRIVERS\isapnp.sys, 5.01.2600.0000 (Dutch), 9/6/2001 18:20:18, 36352 bytes
Name: VIA USB 2.0 Enhanced Host Controller
Device ID: PCI\VEN_1106&DEV_3104&SUBSYS_70201462&REV_86\3&61AAA01&0&84
Driver: F:\WINDOWS\system32\drivers\usbehci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 26624 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Driver: F:\WINDOWS\system32\hccoin.dll, 5.01.2600.2180 (English), 8/4/2004 01:03:12, 7168 bytes
Name: VIA OHCI Compliant IEEE 1394 Host Controller
Device ID: PCI\VEN_1106&DEV_3044&SUBSYS_702D1462&REV_46\3&61AAA01&0&70
Driver: F:\WINDOWS\system32\DRIVERS\ohci1394.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:10, 61056 bytes
Driver: F:\WINDOWS\system32\DRIVERS\1394bus.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:08, 53248 bytes
Driver: F:\WINDOWS\system32\DRIVERS\nic1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 61824 bytes
Driver: F:\WINDOWS\system32\DRIVERS\arp1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 60800 bytes
Driver: F:\WINDOWS\system32\DRIVERS\enum1394.sys, 5.01.2600.0000 (English), 8/17/2001 23:46:40, 6400 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&83
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&82
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&81
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&80
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_2282&SUBSYS_00000000&REV_00\3&61AAA01&0&02
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_1282&SUBSYS_00000000&REV_00\3&61AAA01&0&01
Driver: n/a
Name: VIA Bus Master IDE Controller
Device ID: PCI\VEN_1106&DEV_0571&SUBSYS_70201462&REV_06\3&61AAA01&0&78
Driver: F:\WINDOWS\system32\DRIVERS\viaide.sys, 1.00.0001.0001 (English), 8/3/2004 22:59:44, 5376 bytes
Driver: F:\WINDOWS\system32\DRIVERS\pciidex.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:42, 25088 bytes
Driver: F:\WINDOWS\system32\DRIVERS\atapi.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:44, 95360 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_0282&SUBSYS_00000000&REV_00\3&61AAA01&0&00
Driver: n/a
Name: Sound Blaster Live! 24-bit
Device ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00\3&61AAA01&0&30
Driver: F:\WINDOWS\system32\ksuser.dll, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:14, 4096 bytes
Driver: F:\WINDOWS\system32\ksproxy.ax, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:38, 130048 bytes
Driver: F:\WINDOWS\system32\drivers\ks.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:15:22, 140928 bytes
Driver: F:\WINDOWS\system32\drivers\drmk.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:00, 60288 bytes
Driver: F:\WINDOWS\system32\drivers\portcls.sys, 5.01.2600.2180 (English), 8/3/2004 23:15:50, 145792 bytes
Driver: F:\WINDOWS\system32\drivers\stream.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:08:04, 48640 bytes
Driver: F:\WINDOWS\system32\wdmaud.drv, 5.01.2600.2180 (English), 8/4/2004 01:03:40, 23552 bytes
Driver: F:\WINDOWS\system32\CtDvInst.dll, 0.00.0000.0008 (English), 7/25/2003 11:35:48, 131072 bytes
Driver: F:\WINDOWS\system32\drivers\ctoss2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:47:38, 178672 bytes
Driver: F:\WINDOWS\system32\drivers\ctsfm2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:48:06, 130192 bytes
Driver: F:\WINDOWS\system32\sfman32.dll, 5.12.0001.0130 (English), 8/17/2001 08:35:46, 36864 bytes
Driver: F:\WINDOWS\system32\sfms32.dll, 5.12.0001.0172 (English), 9/22/2003 02:51:52, 172032 bytes
Driver: F:\WINDOWS\system32\ct2mgm.sf2, 9/22/1999 09:18:00, 2167684 bytes
Driver: F:\WINDOWS\system32\P17res.dll, 5.12.0001.0308 (English), 3/29/2004 04:02:48, 136704 bytes
Driver: F:\WINDOWS\system32\P17.dll, 1.00.0001.0029 (English), 4/8/2004 04:37:40, 60928 bytes
Driver: F:\WINDOWS\system32\drivers\P17.sys, 5.12.0001.0314 (English), 6/4/2004 10:27:46, 840960 bytes
Driver: F:\WINDOWS\system32\drivers\Pfmodnt.sys, 3.00.0000.0003 (English), 3/5/2003 12:19:28, 15840 bytes
Driver: F:\WINDOWS\system32\A3d.dll, 80.00.0000.0003 (English), 4/11/2002 03:41:06, 65536 bytes
Driver: F:\WINDOWS\system32\P17CPI.dll, 1.00.0000.0002 (English), 10/2/2003 12:48:18, 53248 bytes
Name: Ethernet-controller
Device ID: PCI\VEN_10EC&DEV_8169&SUBSYS_702C1462&REV_10\3&61AAA01&0&58
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&61AAA01&0&C3
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&61AAA01&0&C2
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&61AAA01&0&C1
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&61AAA01&0&C0
Driver: n/a
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Help would be very much appriciated, thnx!

The two vis.cards issue is normal, it sees the primary output (VGA) as a device and the TV-out a separate device.
Go to device manager to see if there's any device on ur rig that doesn't have drivers.
Did u install the 4-in1 drivers, get the latest version from the MSI support site.
good luck.

MSI K8T NEO2-FIR Memory Issue

Windows XP shows only 1/2 of the memory I have installed in my case 256MB.
My motherboard is MSI K8T NEO2-FIR. I installed one memory module
KingMax PC3200 DDR400 512MB recommended by MSI in DIMM1.
I will appreciate any help!
My System:
CPU - AMD Athlon(tm) 64 Processor 3500+
MB - MSI K8T NEO2-FIR Socket 939
BIOS - Version : AMIINT - 10
HDD - Seagate SATA 2x160GB RAID 0
Video - ATI Radeon 9800 Pro 128MB
PSU - ZALMAN ZM400A-APF
CD/DVD - Plextor PX-712A DVD±R/RW
Memory - KingMax 512MB DDR400
Monitor - Samsung SyncMaster 700NF(T)
OS - Microsoft Windows XP Professional SP1

Please provide specs as outlined in Forum Rules. Espeically what BIOS you have installed.

Msi k8t Neo2 Fir (bios upgrade)

Hi.
I need help, i've a motherboard msi, msi k8t neo2, y have a AMD 3000+ venice, and i can't put de dual bank, i know that i have a 3.3 bios, and with this bios it's not posible, i need toi change for other bios (9.1 or 9.2). I know how to te upgrade, but when i upgrade the bios te computer don't working, only do 4 piii!! (the sound). I don't know what can i do. I tried with all bios posibble, until the beta, where is the bios's beta?
My pc:
MSI K8T NEO2
1GB 2X512 PATRIOT MEMORY DDR400 CAS 2.5
2X160 HD SATA
1X200 HD SATA
1X160 HD PATA
1X40 HD PATA
1X30 HD PATA
ASUS 6800GT 256MB
PSU 420W THERMALTAKE
(SORRY FOR MY ENGLISH, IF ANY PERSON SPEAK SPANISH WILL BE BETTER)
THNKZ

Quote from: WateRMan on 19-October-05, 19:34:33
Hi.
I need help, i've a motherboard msi, msi k8t neo2, y have a AMD 3000+ venice, and i can't put de dual bank, i know that i have a 3.3 bios, and with this bios it's not posible, i need toi change for other bios (9.1 or 9.2). I know how to te upgrade, but when i upgrade the bios te computer don't working, only do 4 piii!! (the sound). I don't know what can i do. I tried with all bios posibble, until the beta, where is the bios's beta?
My pc:
MSI K8T NEO2
1GB 2X512 PATRIOT MEMORY DDR400 CAS 2.5
2X160 HD SATA
1X200 HD SATA
1X160 HD PATA
1X40 HD PATA
1X30 HD PATA
ASUS 6800GT 256MB
PSU 420W THERMALTAKE
(SORRY FOR MY ENGLISH, IF ANY PERSON SPEAK SPANISH WILL BE BETTER)
THNKZ
(FOR the guy that talk spanish)
Hola, (Hi)
la semana pasada tuve el mismo problema con una board similar. Intenté con varias marcas genéricas de memoria y no activaba el dual channel. Actualicé la bios a la versión 9.2 de acuerdo con una recomendación que encontré en este foro: 1º. Coloca una sola memoria en el slot1 y actualiza la Bios a la v. 9.2. Una vez se actualice la Bios apaga el PC y... 2º coloca los dos módulos de memoria, el primero en el slot 2 y el otro en el slot 4 y ya verás que funciona. (Last week i've had same issue with that board. Update the Bios to 9.2 version according to this forum: 1st. populate first slot with one memory stick and run the Bios update. Tunr off your PC and... 2nd populate slot 2 and 4 and you are ready.)
El único problema que he encontrado con esta BIOS es que la tarjeta de video Gcube 9600XT presenta algunos saltos en los juegos. (The only issue about that bios version it's the GeCube Radeon 9600XT that JUMPING in all games.)
BYE!

MSI K8T Neo2-FIR - Cool'n'Quiet FIX

Just turn Cool'n'Quiet off in the BIOS...that's what I did and it works now.
Doesn't make sense...but oh well.
Gman22

@Gman - I see now, what you meant. Another workaround: Speedfan.
@Bas: Gman referred to the bug in Core Center, where fan speed can't be controlled if CnQ is enabled.
Yes, I know that CnQ is something else than fan control.
Fan (the hardware way) control on K8T Neo2-F(IR) is fixed and can not be set by user. Actually CPU fan speed will normally be 2/3. I think that CFAN will rise to 100% if a certain temperature is reached. Although SFAN could be regulated, too, MSI apparently decided to let this on 100% speed.
So, if user wants other fan speeds, he has to rely on additional software.
Core Center is not suitable because of a bug that prevents the software from controlling fans if CnQ is enabled. On the other hand, CC doesn't seem to be designed for Windows NT 5.x, where different types of users that have different permissions are established since 1999 (Release of W2k)
Michael

[Athlon64] MSI K8T Neo2-FIR motherboards

Hi there Friends in this Forum.
Have MSI solving all kind of problems they had before with their socket 939 Motherboards?
And witch socket 939 motherboard is the best one in this moment?
“Sorry for my bad English and my bad spelling”
This is a great and helpful Forum for MSI user!

Mr. Freddy,
Another great board from MSI designed to use the Socket 939 AMD Athlon 64 Processor
is the K8N Diamond's brother: The K8N SLI Platinum (Also MS-7100 Ver. 1.0)
K8N SLI Platinum
Either way, you can't go wrong with any of those two mainboards.
They're almost the same product, but in the case of the K8N SLI Platinum there are some little differences:
1) Four SATA connectors instead of the six SATA connectors you'll find in the K8N Diamond.
2) One Gigabit LAN RJ-45 connector, instead of the two Gigabit LAN RJ-45 connectors in the K8N Diamond.
3) Finally, you'll find a Passive MOS in the K8N SLI Platinum, instead of the Active MOS you'll find in the K8N Diamond.
Everything else, is exactly the same thing. They even have the same model number: MS-7100.
They're both excellent MSI products.
Sincerely,

MSI K8T Neo2 FIR and USB2

I am running MS Windows 2000 Pro with SP4 installed. The only USB ports on the board that show USB2.0 status are the ones between the com ports and the ones under the LAN port. All the others are relegated to USB1.0 status. The device manager shows them the same way. I have tried all the new drivers and nothing seems to work. I find it rather strange that only 2 of the 8 avalible ports are USB2.O enabled.
If anyone can hlep me out with this I would appreciate it.
SYSTEM CONFIG:
AMD Athalon 64 3000+ (Non Overclocked)
MSI 9800Pro video
1gb DDR 400 (512x2)
Seagate 40gb PATA
Seagate 180gb SATA
Audigy 2 ZS
Samsung CDRW /DVD-Rom
Logitec PS2 Keyboard and Mouse
APC Backup Unit
USB:
Logitec iCam 3000 Pro
Lexar Secure Jumpdrive 512
LG External USB2 CDRW
Windows 2000 Pro SP4 and Adobe Software.
IE6.01
Mozilla Firefox and Thunderbird
Various Games.

Hi
Get Wonka to chase up MSI, he will have more clout, perhaps.
I will recheck that all the wires are onto pins on mine, it took 3 seperate attempts to get the Neo Clawhammer working, missing the pins with wires - I need one of those magnifyong lights, and a new set of eyes and fingers.
Check with Balarc Advisor or similar, that the USB2 driver update loaded OK, you might need to install it again.
Hi Wonka, the 9th wire safely tucked away, tnx. BUT seeing how your here. Apart from the 2 front USB on this Thermaltake Skull. I have a 4 port USB front drive bay unit inserted, the header is onto the JUSB1, having removed the D Bracket header. these units work on all other MSI boards, noticed when using Mem sticks, reports USB device nor recognised, plug into back its fine. Puzzled
Cheers
jocko

MSI K8T Neo2 FIR VIA Riad 0 ??????????????

Optimized settings in BIOS kill array VT8237
Why dose this BIOS do this? I cant run my ram (kingston hyperx) at 2-2-5-2 T1 unless i set the BIOS to optimzed settings. when i do this one of my HDD's (2x seagate 160gig 7200.7) running in raid 0 crashs and the array gets destroyed (not all the time thou). After that i cant do anything with that one drive. I cant break the array, i cant use the VIA RAID utility to recreate the array because it freezes for a long time while talking to that drive. As soon as i put the settings back to manual in the BIOS form optimized the array is fine again. This only works if i have not accessed or tried to access the VIA raid util. If i access the util the array is gone. ?????????????????????????????????????????? what the hell is this?????

Do NOT raise FSB to more then 218mhz with SATA disks. If you do, thay are gauranteed to crash detroying all data.
My gues is that it's a phisycal limitiation to the HD's. If you feed em more data than they can handle partitions wil be corrupted.
Maybe with the Maxtor 16mb cach drive u can go a little higher.
If you wanna OC the memory, allways do it manually !
P.s., I've been there so i Know the feeling

MSI K8t neo2 audio problems..

Hello fokes, i've got issues with the onboard soundcard, it wont play any bass at all, its like the sound from a "kitchenradio".
The SoundEffect thingie that is located under Control Panel does only change the bass in winamp, and nothing else...I've got the newest soundcard drivers..
Help needed, i wanna listen to my sweet tunes

Sorry, i forgot all about that.
AMD64 3000+ I believe thats a Winchester
Hitachi 160gb sata disc
Twinmos 512 Dual channelkit
hm what else...oh right, the motherboard
MSI K8T Neo2-FIR
Antec TruePower 380W PSU
Cant check the volts right now due to poor lightning
dont know about the memory timings, i will go check in a while
I've updated all drivers with LiveUpdate..

MSI K8T Neo2 F vs. MSI K7N2 Delta ILSR

Hi there !
I have an amd Athlon XP 3200+ overheating problem, and contacted the technical support of the shop where the processor and CPU was coming from.
Since they do not have any XP 3200+ to replace mine, they propose me to replace fro free :
- the XP 3200+ by an AMD Athlon 64 3200+
- my actual MSI K7N2 delta ILSR by an MSI K8T Neo2 F
... and this for free.
Since I do not know this new motherboard that has been proposed, I'd like to have advice on if this is a good deal ?!?
My actual system has :
- an Aluminium case with 2x 12cm FAN's
- 2 IDE hard drives
- 1 SATA hard drive
- TWINX Corsair XMS 2x256MB PC 3200L (Extreme low latency)
- an AGP 8x video card
- An Antec True Power 480W.
will the new motherboard fit with this configuration?
Many thanks for your input !

Not really, unless you really want to oc your cpu. The K8T boards aren't that good in OC-ing. But still, some is possible and you'll be sure that the board is as steady as a rock.
For a moment I thought you were talking about a Neo board ... but I just saw it's a Neo2. That means Socket 939 -> dual channel RAM.
The only risk you have now, is that your RAM won't work in dual channel with the CPU. But that's not really a board-problem, more a CPU/RAM-controller related problem. But then, it's still a great offer and chances are good that it will work. If you run into any trouble, RAM-related, just flash bios to version 1.9 and you will probably be just fine.

MSI K8T Neo2-FIR: No fan control since BIOS 3.3?

Similar Messages

Maybe you are looking for