MSI K8T Neo2 - Sound only at one side.

Hey guys,
I just got my PC upgraded, when i got it back from the PC Store i reinstalled everything and such.
Now here's the problem.
I have to plug my headphones in the front side of my PC, now when plugging my Headphones in, i only get sound from one side, trying other drivers didn't succeed. Any suggestions?
Setup:
MSI K8T Neo2
AMD Athlon64 3200+
Kingston 2x 512 MB - Dual Channel
2x Maxtor 120 GB
ATi Radeon X800 Pro
X-Gear Xyclops 400Watt Case
Hope to have it fixed, can't game without proper sound
Regards,
ExO,

Problem fixed, had to remove the connecters for the front side and had to place two jumpers(written in the manual).
But does anyone know why the quality is so poor?
I didn't have this on my old motherboard(also AC97) but there the quality was beter
Oh well,

Similar Messages

MSI K8T Neo2 F 939 pin, any known video or other driver issues?

Using a MSI K8T Neo2 F, AMD 64 3500+ winchestor, 1gb DDR400 3200 memory, New WD 740GD SATA HDD, ATI 9800 GT Pro 256 videocard. Fresh XP Pro SP2 install with all the update, latest Via 4 in 1s.
Seems like my problems began when I upgraded video drivers to either Cat 4.9s or 5.1s (ATI Radeon 9800 GT Pro 256) in order to get Doom3 running as it wouldn't run on the v 3.4 drivers that came on the cd-rom with the videocard.
HL2 would play fine with those old drivers. After upgrading to newer drivers, HL2 and Doom 3 (which now at least plays) won't play for more than 5 minutes yet other games will. The same videocard (perhaps 3 months old now) with cat 4.9 drivers ran perfectly in my old system so I know the videocard's still OK.
I can use a restore point prior to installing the newer drivers BUT that doesn't solve the problem as to why I can't use the newer drivers.
I've heard where some have problems with XP SP2 vs SP1. Anyone here have opinions on that?
I have spare HDDs so I can use one with another fresh XP install, even try just SP1 if that'd matter? Doing that would eliminate hardware as being an issue.
It's now not just games either, it'll crash doing Turbotax and other (not demanding) times when not gaming. Games put alot of demand on any system.
Have also tryed another PSU, now an Antec Truepower 430W vs a cheaper brand 550W. Not heat related as I've tryed this with a house fan blowing on high directly at the mobo, cpu side (cover's off).
I've been trying to solve this for about a month now and it's very annoying.
I ran Memtest for 8 hours last night, no errors so the memory's OK. I'm now running another test program called Prime95 via advice from someone at Anandtech.com. http://forums.anandtech.com/messageview.aspx?catid=32&threadid=1513208
If ANYONE here has seen anything like this relating to this motherboard (which I suspect might be a problem?), please share your thoughts.
Thanks

Can you explain where I'll find "VPU recover (adapter settings)"? In display settings or ATIs cat. control center, guessing? I'm at work now but will check that soon.
AGP fast-write has been off.
As for going back to older video drivers, it did seem OK with the old Cat. v3.4 drivers that came on the videocards driver cd-rom and played HL2 fine with those drivers HOWEVER, Doom3 doesn't run with those older drivers and needs the newer drivers to function.
When it crashes, the screen usually goes to black (not BSOD). Sometimes it'll just freeze with skipping sound for a few seconds before going black, sometimes it'll reboot but usually I just reboot it. Can't 3 finger solute to task manager or Esc out of it either.

Msi k8t Neo2 Fir (bios upgrade)

Hi.
I need help, i've a motherboard msi, msi k8t neo2, y have a AMD 3000+ venice, and i can't put de dual bank, i know that i have a 3.3 bios, and with this bios it's not posible, i need toi change for other bios (9.1 or 9.2). I know how to te upgrade, but when i upgrade the bios te computer don't working, only do 4 piii!! (the sound). I don't know what can i do. I tried with all bios posibble, until the beta, where is the bios's beta?
My pc:
MSI K8T NEO2
1GB 2X512 PATRIOT MEMORY DDR400 CAS 2.5
2X160 HD SATA
1X200 HD SATA
1X160 HD PATA
1X40 HD PATA
1X30 HD PATA
ASUS 6800GT 256MB
PSU 420W THERMALTAKE
(SORRY FOR MY ENGLISH, IF ANY PERSON SPEAK SPANISH WILL BE BETTER)
THNKZ

Quote from: WateRMan on 19-October-05, 19:34:33
Hi.
I need help, i've a motherboard msi, msi k8t neo2, y have a AMD 3000+ venice, and i can't put de dual bank, i know that i have a 3.3 bios, and with this bios it's not posible, i need toi change for other bios (9.1 or 9.2). I know how to te upgrade, but when i upgrade the bios te computer don't working, only do 4 piii!! (the sound). I don't know what can i do. I tried with all bios posibble, until the beta, where is the bios's beta?
My pc:
MSI K8T NEO2
1GB 2X512 PATRIOT MEMORY DDR400 CAS 2.5
2X160 HD SATA
1X200 HD SATA
1X160 HD PATA
1X40 HD PATA
1X30 HD PATA
ASUS 6800GT 256MB
PSU 420W THERMALTAKE
(SORRY FOR MY ENGLISH, IF ANY PERSON SPEAK SPANISH WILL BE BETTER)
THNKZ
(FOR the guy that talk spanish)
Hola, (Hi)
la semana pasada tuve el mismo problema con una board similar. Intenté con varias marcas genéricas de memoria y no activaba el dual channel. Actualicé la bios a la versión 9.2 de acuerdo con una recomendación que encontré en este foro: 1º. Coloca una sola memoria en el slot1 y actualiza la Bios a la v. 9.2. Una vez se actualice la Bios apaga el PC y... 2º coloca los dos módulos de memoria, el primero en el slot 2 y el otro en el slot 4 y ya verás que funciona. (Last week i've had same issue with that board. Update the Bios to 9.2 version according to this forum: 1st. populate first slot with one memory stick and run the Bios update. Tunr off your PC and... 2nd populate slot 2 and 4 and you are ready.)
El único problema que he encontrado con esta BIOS es que la tarjeta de video Gcube 9600XT presenta algunos saltos en los juegos. (The only issue about that bios version it's the GeCube Radeon 9600XT that JUMPING in all games.)
BYE!

With MSI K8T NEO2 FIR Mb (help)

Hi.
I need some help....!
My computer contains:
AMD64 3500+ (130nm, Newcastle) socket 939
MSI K8T NEO2 FIR Hovedkort for S939 K8T800PRO
Kingston PC3200 HyperX DDR 1024MB CL2 Non-ECC Ultra Low Latency (2-2-2-5-1)
Gainward GeForce 6800GT 256MB GS GDDR3 AGP, "Ultra/2400 Golden Sample"
9 X Western Digital HD's
2 X Nec dvd-burning-r
A Gainward psu. (delivers "+3,3=28a" "+5=45a" "+12=20a" and a total of 550W)
I think I have a power problem... because the "+12" has a rather low number for this kind of system... and the BIOS is showing me that the "+12" reading is -- 11,42V -- This is idle in BIOS... and I got the same reading in Win... (idle)
The first thing I thought of was to disable as many disk's/cd-drives as I was able to... the only thing I have left is C: BUT!! the bios and windows gives me the same reading of the "+12" 11,42V.
Both +3,3 and +5 are on the + side.
The main problem is when I ex starts a game or a benchmark prog... Like HL2,battlefield,War3,3dmarks,Prime95 + + + the pc shuts down, or the prog/game won't run properly.... Kind of irritating!!!
Do anybody have any experience with this kind of problem?!?!?! I need help!
I thought of buying the OCZ 520w psu.... Does it solve the problem?
http://www.ocztechnology.com/products/power_management/ocz_powerstream_power_supply
This psu should give me these specs:
520W:
+3.3V(28A)
+5V(40A)
+12V(33A)
Many Thanks for your help!!
regards.
Kris

Prime95 version 23.8.1 is my first choice, I run the torture test in blend mode because it uses lots of ram, very sensitive to errors. Pure math computataions and matched against known results.
I also use Hot Cpu tester Pro 4.2.2, they do have a free version as well it tests alot of different cpu instructions as well as memory simultaniously as well as doing a burn-in. Faster than Prime, nice when your overclocking since you can see what is failing sse instructions for example, then you can either up the cpu voltage or ram voltage depending on the test or back off the oc a bit.Used it alot with my old Barton 2500 rig.
I've seen a third program used on some of the overclocking sites Superpi. I believe, lol, been meaning to bookmark and try it myself. I imagine it's used to quickly detect memory errors as well as being a benchmark without stressing components.
This board isn't made for overclocking kind of useless without a working agp/pci lock. Sata corruption over 220 fsb so I've been content with using the first 2 programs to tweak my memory settings and test for stability.
Yeah I noticed that too when I set the DDR to 400 the bios will override the Cas being set to 2 and run it at 2.5 My board doesn't freeze when saving it though. I leave it set at 2.5 in the bios and use A64Tweaker to manually set the Cas to 2 in windows it works fine that way and is easily verified with cpuz or everest. Personally I don't trust using spd in the bios and prefer to manually set all the timing to the manufacturers recommended settings. *edit* I also forgot to mention to when you check your ram manufacturer's website to see if the sticks of ram are capably of Command Rate 1T(CR) some can't other can only if one stick is being used. You may need to set the Dram 1T timing to disable, sorry about that

MSI K8T Neo2 FIR, need help installing drivers

Hi there,
I need help with installing drivers. Here’s my setup:
CPU: AMD Athlon 64 3500+
Mainbord: MSI K8T Neo2 FIR (VIA K8T800Pro)
OS: Windows XP Professional, SP2 installed
ATI Radeon 9600 Pro
I updated per MSI Live Monitor, but when I run ‘dxdiag’, I says I have to update the ‘VIA standard host bridge’. I don’t know what this is or where it can be found. It could be I saved the updated drivers in the wrong file (F:\ Program Files\...) where F is my primary harddisk and the drivers should be saved in F:\Windows\ System 32.
Also, my hardware setup tells me there are two videocards 'installed': a Radeon 9600 Pro and a radeon 9600 Pro (secundary). Do I need to de-install the secundary one?
Here’s a piece of my most recent dxdiag:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
System Information
Time of this report: 5/22/2005, 10:22:20
Machine name: UIWDC2ARUPUS49X
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: Dutch (Regional Setting: Dutch)
System Manufacturer: MSI
System Model: MS-6702E
BIOS: Version 07.00T
Processor: AMD Athlon(tm) 64 Processor 3500+, MMX, 3DNow, ~2.2GHz
Memory: 1024MB RAM
Page File: 285MB used, 2687MB available
Windows Dir: F:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
Sound Tab 1: No problems found.
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found. DirectPlay test results: The tests were cancelled before completing.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: ATI RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_000217EE&REV_00
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (16 bit) (60Hz)
Monitor: Plug en Play-monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6546 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 5/4/2005 04:28:54, 226816 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n.v.t.
Mini VDD: ati2mtag.sys
Mini VDD Date: 5/4/2005 04:28:34, 1133056 bytes
Device Identifier: {D7B71EE2-0210-11CF-CC6D-0820A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4150
SubSys ID: 0x000217EE
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.
Sound Devices
Description: Sound Blaster Live! 24-bit
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Sound Blaster Live! 24-bit
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
DirectMusic
DLS Path: F:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Sound Blaster Live! 24-bit, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI-mapper (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SoundFont Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: All tests were successful.
DirectInput Devices
Device Name: Muis
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Toetsenbord
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB-hoofdhub
| Vendor/Product ID: 0x1106, 0x3038
| Matching Device ID: usb\root_hub
| Lower Filters: vulfntrs
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:44, 57600 bytes
| Driver: usbd.sys, 9/7/2001 14:00:00, 4736 bytes
Gameport Devices
PS/2 Devices
+ Standaardtoetsenbord (101/102 toetsen) of Microsoft Natural PS/2-toetsenbord
| Matching Device ID: *pnp0303
| Service: i8042prt
| Driver: i8042prt.sys, 8/4/2004 00:55:30, 53760 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ Toestenbordstuurprogramma voor Terminal Server
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ HID-compliant Wheel Mouse
| Vendor/Product ID: 0x046D, 0xC03D
| Matching Device ID: hid\vid_046d&pid_c03d
| Upper Filters: LMouFlt2
| Lower Filters: LHidFlt2
| Service: mouhid
| Driver: mouhid.sys, 9/6/2001 19:04:40, 12288 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
| Driver: LHidFlt2.Sys, 12/17/2003 09:50:00, 25505 bytes
| Driver: LMouFlt2.Sys, 12/17/2003 09:50:00, 70801 bytes
| Driver: Logi_MwX.Exe, 12/17/2003 09:50:00, 19968 bytes
|
+ Stuurprogramma voor muis van Terminal Server
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: The tests were cancelled before completing.
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM1
DirectPlay8 TCP/IP Service Provider: LAN-verbinding 2 - IPv4 -
DirectPlay Voice Codecs
Voxware VR12 1.4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.10 13 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 65.4 GB
Total Space: 76.3 GB
File System: NTFS
Model: ST380011A
Drive: F:
Free Space: 56.7 GB
Total Space: 78.2 GB
File System: NTFS
Model: Maxtor 6Y080L0
Drive: D:
Model: LITE-ON COMBO SOHC-5232K
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
Drive: E:
Model: LG CD-ROM CRD-8521B
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
System Devices
Name: VIA CPU to AGP2.0/AGP3.0 Controller
Device ID: PCI\VEN_1106&DEV_B188&SUBSYS_00000000&REV_00\3&61AAA01&0&08
Driver: F:\WINDOWS\system32\DRIVERS\VIAAGP1.SYS, 5.01.0000.3442 (English), 7/2/2003 04:42:00, 27904 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_7282&SUBSYS_00000000&REV_00\3&61AAA01&0&07
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_4282&SUBSYS_00000000&REV_00\3&61AAA01&0&04
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_3282&SUBSYS_00000000&REV_00\3&61AAA01&0&03
Driver: n/a
Name: VIA Standard PCI to ISA Bridge
Device ID: PCI\VEN_1106&DEV_3227&SUBSYS_00000000&REV_00\3&61AAA01&0&88
Driver: F:\WINDOWS\system32\DRIVERS\isapnp.sys, 5.01.2600.0000 (Dutch), 9/6/2001 18:20:18, 36352 bytes
Name: VIA USB 2.0 Enhanced Host Controller
Device ID: PCI\VEN_1106&DEV_3104&SUBSYS_70201462&REV_86\3&61AAA01&0&84
Driver: F:\WINDOWS\system32\drivers\usbehci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 26624 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Driver: F:\WINDOWS\system32\hccoin.dll, 5.01.2600.2180 (English), 8/4/2004 01:03:12, 7168 bytes
Name: VIA OHCI Compliant IEEE 1394 Host Controller
Device ID: PCI\VEN_1106&DEV_3044&SUBSYS_702D1462&REV_46\3&61AAA01&0&70
Driver: F:\WINDOWS\system32\DRIVERS\ohci1394.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:10, 61056 bytes
Driver: F:\WINDOWS\system32\DRIVERS\1394bus.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:08, 53248 bytes
Driver: F:\WINDOWS\system32\DRIVERS\nic1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 61824 bytes
Driver: F:\WINDOWS\system32\DRIVERS\arp1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 60800 bytes
Driver: F:\WINDOWS\system32\DRIVERS\enum1394.sys, 5.01.2600.0000 (English), 8/17/2001 23:46:40, 6400 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&83
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&82
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&81
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&80
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_2282&SUBSYS_00000000&REV_00\3&61AAA01&0&02
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_1282&SUBSYS_00000000&REV_00\3&61AAA01&0&01
Driver: n/a
Name: VIA Bus Master IDE Controller
Device ID: PCI\VEN_1106&DEV_0571&SUBSYS_70201462&REV_06\3&61AAA01&0&78
Driver: F:\WINDOWS\system32\DRIVERS\viaide.sys, 1.00.0001.0001 (English), 8/3/2004 22:59:44, 5376 bytes
Driver: F:\WINDOWS\system32\DRIVERS\pciidex.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:42, 25088 bytes
Driver: F:\WINDOWS\system32\DRIVERS\atapi.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:44, 95360 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_0282&SUBSYS_00000000&REV_00\3&61AAA01&0&00
Driver: n/a
Name: Sound Blaster Live! 24-bit
Device ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00\3&61AAA01&0&30
Driver: F:\WINDOWS\system32\ksuser.dll, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:14, 4096 bytes
Driver: F:\WINDOWS\system32\ksproxy.ax, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:38, 130048 bytes
Driver: F:\WINDOWS\system32\drivers\ks.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:15:22, 140928 bytes
Driver: F:\WINDOWS\system32\drivers\drmk.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:00, 60288 bytes
Driver: F:\WINDOWS\system32\drivers\portcls.sys, 5.01.2600.2180 (English), 8/3/2004 23:15:50, 145792 bytes
Driver: F:\WINDOWS\system32\drivers\stream.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:08:04, 48640 bytes
Driver: F:\WINDOWS\system32\wdmaud.drv, 5.01.2600.2180 (English), 8/4/2004 01:03:40, 23552 bytes
Driver: F:\WINDOWS\system32\CtDvInst.dll, 0.00.0000.0008 (English), 7/25/2003 11:35:48, 131072 bytes
Driver: F:\WINDOWS\system32\drivers\ctoss2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:47:38, 178672 bytes
Driver: F:\WINDOWS\system32\drivers\ctsfm2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:48:06, 130192 bytes
Driver: F:\WINDOWS\system32\sfman32.dll, 5.12.0001.0130 (English), 8/17/2001 08:35:46, 36864 bytes
Driver: F:\WINDOWS\system32\sfms32.dll, 5.12.0001.0172 (English), 9/22/2003 02:51:52, 172032 bytes
Driver: F:\WINDOWS\system32\ct2mgm.sf2, 9/22/1999 09:18:00, 2167684 bytes
Driver: F:\WINDOWS\system32\P17res.dll, 5.12.0001.0308 (English), 3/29/2004 04:02:48, 136704 bytes
Driver: F:\WINDOWS\system32\P17.dll, 1.00.0001.0029 (English), 4/8/2004 04:37:40, 60928 bytes
Driver: F:\WINDOWS\system32\drivers\P17.sys, 5.12.0001.0314 (English), 6/4/2004 10:27:46, 840960 bytes
Driver: F:\WINDOWS\system32\drivers\Pfmodnt.sys, 3.00.0000.0003 (English), 3/5/2003 12:19:28, 15840 bytes
Driver: F:\WINDOWS\system32\A3d.dll, 80.00.0000.0003 (English), 4/11/2002 03:41:06, 65536 bytes
Driver: F:\WINDOWS\system32\P17CPI.dll, 1.00.0000.0002 (English), 10/2/2003 12:48:18, 53248 bytes
Name: Ethernet-controller
Device ID: PCI\VEN_10EC&DEV_8169&SUBSYS_702C1462&REV_10\3&61AAA01&0&58
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&61AAA01&0&C3
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&61AAA01&0&C2
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&61AAA01&0&C1
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&61AAA01&0&C0
Driver: n/a
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Help would be very much appriciated, thnx!

The two vis.cards issue is normal, it sees the primary output (VGA) as a device and the TV-out a separate device.
Go to device manager to see if there's any device on ur rig that doesn't have drivers.
Did u install the 4-in1 drivers, get the latest version from the MSI support site.
good luck.

MSI K8T NEO2-FIR Memory Issue

Windows XP shows only 1/2 of the memory I have installed in my case 256MB.
My motherboard is MSI K8T NEO2-FIR. I installed one memory module
KingMax PC3200 DDR400 512MB recommended by MSI in DIMM1.
I will appreciate any help!
My System:
CPU - AMD Athlon(tm) 64 Processor 3500+
MB - MSI K8T NEO2-FIR Socket 939
BIOS - Version : AMIINT - 10
HDD - Seagate SATA 2x160GB RAID 0
Video - ATI Radeon 9800 Pro 128MB
PSU - ZALMAN ZM400A-APF
CD/DVD - Plextor PX-712A DVD±R/RW
Memory - KingMax 512MB DDR400
Monitor - Samsung SyncMaster 700NF(T)
OS - Microsoft Windows XP Professional SP1

Please provide specs as outlined in Forum Rules. Espeically what BIOS you have installed.

MSI K8T Neo2 failures

Hi,
I have bought an MSI K8T Neo2 motherboard a few weeks ago. It had stability problems from the beginning and there was one particular issue: Core Center was using 100% CPU when started, and its GUI would not appear. First I checked the memory modules, and one of the was indeed faulty. However, after replacing it, the stability problems continued. So I took the motherboard to the vendor, and it was found to be faulty by them and replaced. The new motherboard worked fine initially (Core Center was running properly and no stability problems), but after a day or so I experienced a crash and when trying, Core Center was again using 100% CPU and no GUI. So I suspect the motherboard has failed again. However, I find it a bit unlikely (though not impossible) that I would have two faulty motherboards in a row, so probably another component causes the motherboard to fail.
Based on the behaviour I described, what part of the motherboard may have failed? What other component may cause such a failure? What can I check to find the real reason for the failures? Can you recommend some diagnostics tool that can help finding the reasons for this kind of problems?
It should be noted, that I have performed no overclocking. The CPU is an Athlon64 3000+, the memory modules (2x512 MB) are Samsung DDR400. Another K8T Neo2 motherboard with CPU and memory of the same type and brand and from the same vendors works flawlessly. The other components in my machine are older and have worked reliably for at least months but in same cases years with another, older motherboard. I am using a 300Wt PSU, which may be low, but even if this is low, could it actually corrupt the motherboard permanently?
Another symptom: under Linux I use CPU frequency scaling, so that most of the time the CPU runs at 1GHz, and goes to 1.8GHz only when, e.g., compiling something. I noticed with the first mobo and then with the replacement after the first crash that it sometimes fails to set the frequency and then it wanders around 900MHz (betwen 800 and 1000 MHz, i.e. in quie a big range). It may be a problem with the Linux driver, though.
Thanks,
István

When a PSU's efficiency is too low, it can not deliver the demanded output. Higher temps make efficiency drop significantly. When a PSU can't deliver the demanded output, chances are it can not keep the voltages (3,3v / 5v / 12v) within safety margins. When a component is overvolted/undervolted for a longer period of time, it will be damaged.
Most of the time, your board will be damaged first. It delivers power mainly to the cpu, so the faulty board could damage the cpu due to overvolting it...
Look out for an Enermax or OCZ with 30+ amps on all rails, for example an Enermax Noisetaker 475W (double 12v rail) or an Enermax 465W (single 12v rail). Both have efficiency in the 75-80% range at all levels of output demand. It doesn't get any better than that. Those things are pricy, but so is the rest of your rig, so you don't want to damage your stuff any further.

MSI K8t neo2 audio problems..

Hello fokes, i've got issues with the onboard soundcard, it wont play any bass at all, its like the sound from a "kitchenradio".
The SoundEffect thingie that is located under Control Panel does only change the bass in winamp, and nothing else...I've got the newest soundcard drivers..
Help needed, i wanna listen to my sweet tunes

Sorry, i forgot all about that.
AMD64 3000+ I believe thats a Winchester
Hitachi 160gb sata disc
Twinmos 512 Dual channelkit
hm what else...oh right, the motherboard
MSI K8T Neo2-FIR
Antec TruePower 380W PSU
Cant check the volts right now due to poor lightning
dont know about the memory timings, i will go check in a while
I've updated all drivers with LiveUpdate..

MSI K8T Neo2 F vs. MSI K7N2 Delta ILSR

Hi there !
I have an amd Athlon XP 3200+ overheating problem, and contacted the technical support of the shop where the processor and CPU was coming from.
Since they do not have any XP 3200+ to replace mine, they propose me to replace fro free :
- the XP 3200+ by an AMD Athlon 64 3200+
- my actual MSI K7N2 delta ILSR by an MSI K8T Neo2 F
... and this for free.
Since I do not know this new motherboard that has been proposed, I'd like to have advice on if this is a good deal ?!?
My actual system has :
- an Aluminium case with 2x 12cm FAN's
- 2 IDE hard drives
- 1 SATA hard drive
- TWINX Corsair XMS 2x256MB PC 3200L (Extreme low latency)
- an AGP 8x video card
- An Antec True Power 480W.
will the new motherboard fit with this configuration?
Many thanks for your input !

Not really, unless you really want to oc your cpu. The K8T boards aren't that good in OC-ing. But still, some is possible and you'll be sure that the board is as steady as a rock.
For a moment I thought you were talking about a Neo board ... but I just saw it's a Neo2. That means Socket 939 -> dual channel RAM.
The only risk you have now, is that your RAM won't work in dual channel with the CPU. But that's not really a board-problem, more a CPU/RAM-controller related problem. But then, it's still a great offer and chances are good that it will work. If you run into any trouble, RAM-related, just flash bios to version 1.9 and you will probably be just fine.

Brand new Ipod touch G4 with sound only in one earbud

I have a brand new Ipod touch G4 with sound only in one earbud. I have tried different types of headphones, but get the same result. If I jiggle the connector pin, I can get sound on both earbuds, but only on one side when the connector pin is push all the way in.
I have an older Ipod g4 without this problem
any suggestions?

Try on your ipod going to Settings-General-Accessibility. Scroll down into Hearing and see that Mono Audio is off. Maybe that's the problem.

MSI K8T Neo2 constant hangup

OK, so I changed my motherboard a few days ago, and got myself a MSI K8T Neo2 card, with the AMI bios ver.3.31a
I put in my old 2 x Apacher 256mb pc 2700 ram (single side) in there, and tried to add in some other ram, but it failed.
I also got my 350powersupply running on it. (It says 5v, 3.3v and 12v on the side, saw someone asking about that in another tread, if that helps)
So now I get to boot all the way into windows (XP SP2 btw), and I even get it running for a long while (sometimes)
Like last night, it was up all night doing recovery from a old HD, that took 7-8hours, and no brakedown.
However, when I try to do normal things... like open a folder, there is a 1 in 20 chance (about) that it will hang.. Same with watching a movie, while watching it will just hang.
So when starting a program/task, running a program/task, ending a program/task. There is always a chance of frezzing up.
Anyone got any idea of what the problem is?

35A, 28A, 17A, 0.3A, 0.8A, 2A
I'w been thinking about a ram problem, seeing how the ram is old, and most people complain over the fact that Ram prevents booting (not a problem) and makes the system unstable (just my problem).
Video driver/card problem never crossed my mind.. it's nvidia.. the most streamline drivers out there.
There is no cpu drain, and no apps that are not responding. I have been having this problem all the way since I did a clean install of windows, so I don't think it's a program problem.
However.. I found the first sign of "always" crash last night.
If I wanted to play Evil Genius, and I had a file application started, (emule or Ares) It would hang before it could load up, always. If I had them turned of, then it would have a far bigger chance of starting and running normaly.

MSI K8T Neo2 slow SATA problem

Hello members,
I do have a MSI K8T Neo2 mainboard with Via chipset. The board supports SATA 150. AFAIK this means it should support transfer rates up to 150 MB/s.
Now Ive bought a SATA3 SSD with over 500 MB/s. Because SATA 3 is downcompatible to SATA 1 its working so far.
The only problem is I expected 150MB/s but I do only get about 115 MB/s with benchmark programs like HD Tune and AS SSD Benchmark in sequential read.
I do have the latest drivers and bios updates but it seems MSI SATA controllers is very slow.
Can anyone help me getting it faster?

Thank you.
Does this mean in praxis I dont get 150 MB/s ?
Is this general or only MSI specific?

S3 sleep state issue (MSI K8T Neo2 FIR)

Hi,
CPU load is too high (about 80-95%) all the time after the system waked up from S3 sleep state. This is dramatically decreasing system performance.
My configuration is:
MSI K8T Neo2 FIR mainboard
CPU Athlon64 3000+ (Venice rev. E6)
AGP GeForce 6600GT VGA card
Creative SB Live! series
WinXP SP2

Wild-Robot,
The following link was suggested to me, since I wondered if my problems might have needed a bios update. The board I have is a 754, thouugh, not a 959, so I would have been suspicious of using this update, anyway. Then Tiresmoke mentioned that the new update addresses a sleep state (S3) issue. Might that help your situation? I would n't know, but it may be worth a look:
MSI Germany published Version 9.3 for K8T Neo2-F(IR):
http://www.msi-computer.de/produkte/main_idx_view.php?Prod_id=402&Seite=BIOS
That Version cannot yet be found at MST TW or MSI USA.
Logged
Board: K8T Neo2-FIR, BIOS 3.30
CPU: Athlon64 3000+, S.939 (Winchester)
RAM: 2x512MB PC3200 CL3 Infineon Orig. (64D64320GU5C) 3.0-3-3-8
VGA: XFX Geforce 6200 AGP8x 256MB, fanless :-)
SND: Terratec DMX Xfire 1024 with Hercules Drivers :-)
HDD: Samsung SP1213N
HDD: Samsung SV1203N
DVD: Liteon LTD-166S
DVD: LG GSA 4163B
PSU: FSP350-60 THN-P (22A@3,3V;21A@5V;10+15A@12V)
Tiresmoke
VIA Freak
Global Moderator
Tiresmoke then mentions:
Well Babblefish translation tells me that this;
Behebt Probleme mit der CPU Auslastung nach dem aufwachen aus dem Standby Modus (S3)
is saying this;
Problems with the CPU extent of utilization repairs after that wakes up from the Standby mode (S3)
So nasically is has something to do with the S3 standby mode issues. As I do not use any standby mode I have not seen any issues. If you have had any then you may want to give it a try but they don't say they fixed anything else so if you are like me and not having any issues you may want to give this one a pass.
Hope that helps.

How do I get my printer to print only on one side of the paper?

I want to print only on one side of the papger. But machine prints out on both sides. When I remove the duplexer at back of machine, the paper flies out the back and printing error says no paper. I'm going nuts. I am a writer and can only submit material on one side of the paper. I just got this machine and hate that it has no manual and the manual on line is beyond me. I need simple easy to understand instructions for my simple brain. thanks

Hi,
Follow these steps to disable two sided printing:
Open the file you would like to print. From the File menu select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the Show Details button to see all available settings.
Click the settings drop down, it will usually appear as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
Set the Two-Sided option as Off.
You may save the settings as a preset by clicking Presets > Save Current Settings as Preset...
By doing so and completing the print job these settings will remain default till another preset will be used in the future.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When creating a PDF from the scanner, it only scans one side despite the settings.

When creating a PDF from the scanner, it only scans one side. I am using a fi-7160 that supports scanning both sides at once. The Scanner software is configured to scan both sides, and so are the presets in Adobe Acrobat Pro. I've only gotten the setting to work with the Custom Scan setting. Has anyone else had this problem, and what is the solution?
Additionally, the software bundled with the scanner with automatically omit the back sides of a page if it is blank. I am scanning large files with occasional double sided pages. Is there a way to avoid having to manually delete blank pages when creating a new PDF from the scanner? It takes twice as long because I'm using the OCR stabilization.

Hi anne,
Could you please let me know what Acrobat and OS version are you using.
Does this happen in case of any particular PDF or all PDF files?
Try repairing Acrobat and then again check.
Hope to get your response.
Regards,
Anubha

MSI K8T Neo2 - Sound only at one side.

Similar Messages

Maybe you are looking for