MSI K9N SLI/K9N ULTRA bios update

Hello everyone,
I want to install windows 7 on my Pc but during the installation my PC stucks and do nothing.
I have already tried a lot of things but nothing happened.The same thing again.
Finaly I think that I need to update my BIOS version because I have not do it before.(since 2006 when I bought my PC)
Probably I should do it from a bootable CD because my motherboard can not boot from a usb stick and also I don't have a flopy Drive.
Is there any official tutorial (maybe from MSI) to do it?
Do you have anything else to propose???
Thank you in advance!!!

>>Posting Guide<<

Similar Messages

  • K9N Ultra BIOS update

    Hi. I have K9N Ultra. I had Sempron 2800+ installed on it, and everything worked fine. Now I'd like to install Athlon64 X2 5600. BIOS POST said that it doesn't know processor's revision and won't work at all. I downloaded new BIOS from http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=253 (7250v3A.zip). Unpacked and copied Afud408.exe and A7250NMS.3A0 to disk C:\. Then I booted from win98 boot floppy and did the following actions:
    > c:\
    > Afud408.exe A7250NMS.3A0
    BIOS update was successful, I turned off the computer, cleared CMOS with SW2 button and installed new Athlon64 X2 5600 CPU. Then I booted again.
    The problem is that my system works unstable now. It may suddenly turn off in Windows when I play games. In Linux it may suddenly turn off when I use microphone in Skype.
    Motherboard's version as it written on the board between PCI slots: MS-7250 Ver: 2.1.
    How to fix it? Thanks!

    Quote from: BOSSKILLER on 16-January-09, 20:43:36
    Read >>Posting Guide<<
    Reseat the CPU and make sure CPU heatsink is mounted properly and no overheating issue occur.
    It is not overheated, because my system turns off immediately after test call in Skype (in Debian Linux). I can compile software for hours, using 100% of both CPU cores, and my system works stable, so I can conclude that it is not overheated.
    I have 2x1GB Kingston DDR2-800, GeForce 7600GS PCI-E, 2x250 GB SATA Seagate drives, Athlon 64 X2 5600 (AM2).

  • MSI K9N ULTRA 2F & PALIT 8800GT SONIC ISSUE

    i have msi k9n ultra 2f and ati x1950gt. i decided to buy palit 8800gt sonic. but no monitor signal when i put palit 8800 gt sonic. everything works but no screen. then i replace my old card, working pc at the beginning. it says like this : " your bios settings overlock stopped to work. system back to previous settings. " like this.
    palit 8800gt sonic changes my mobo's bios settings? there is any solution?  i updated mobo's bios but still same problem. pls help me.

    Well do >>Clear CMOS Guide<< with power cord removed,
    and leave just one memory stick in 1st DIMM close to CPU socket, then try to boot.

  • MSI K9N ULTRA 2F max vdimm (max DDR2 voltage!)

    1st:   I would like to ask you, the maximum voltage for the vdimm, that MSI K9N ULTRA-2F provides.
    2nd:  Will it work with OCZ PC2-6400 EL DDR2 1GB (2X512MB) GOLD EDITION GX XTC ?
    Greetings from Greece 

    Original 7250 supports 1.80 - 2.45v in 0.05v steps , latest bios is :7250v143
    K9N ULTRA 2F is MS7250-040 and use another bios , latest : 7250v31
    It supports DDR2-800 (PC2-6400) DDR2-667 & DDR2-533
    The OCZ DDR2 PC2-6400 Gold GX XTC Rev 2 Dual Channel 2 GB nominal voltage is 1.95 volt
    Latest bios for this board is
    K9N Ultra (MS-7250) V3.1 BIOS Release
    1. This is AMI BIOS release
    2. This BIOS fixes the following problem of the previous version:
    -  Update AMD NPT version.
    -  Update SB module version.
    -  Support AMD AWAY mode.
    Hard to say for sure if the VDIMM is the same (max 2.45v) since no manual is availible on any MSI location for
    this K9N Ultra-2F version (only found it at Japan site ) . But it should be the same .

  • MSI K9N Ultra (MS-7250 v2) SATA II ports dosnt work

    I have problem with 4 of 6  SATA II ports in the mainboard  (MSI K9N Ultra (MS-7250 v2)(SATA II 1~6 supports RAID 0/ 1/ 0+1 or RAID 5 mode by NVIDIA® nForce 570) doesn't work after install wrong program please help
    thanks

    why no any body help this pictures from my bois sitting and my problem I need help please
     MSI K9N Ultra (MS-7250 v2)
    bois pictures
    Here is functioning normally
    Here is functioning not normally

  • [SOLVED] MSI Z97 Gaming 9 AC - Bios Update Fail

    Hi,
    today i decided to do a bios update of my board.
    A friend of me told me NOT to use the Windows-Flash tool cause he killed two borads with it.
    Ok so i used the flash utility from the bios/uefi menu with a usb-stick (M-Flash).
    Everything looked ok - flash tool was running and told me success/complete and it will now reboot/reset.
    At this time i wasn't able to boot anymore 
    It was like the board tried to read the flash but failed, reset, failed ...
    Lucky for me there is this little switch for the bios chip.
    Everything worked with the backup chip and i tried to reflash the broken master chip.
    -> Using the MSI E-Setup with Mode "In DOS Mode. (USB)".
    Booting up the usb stick and switched to master bios chip when i was seeing the "alert - only continue when you know what you are doing bla bla"-message.
    Wasn't able to flash anything cause of error:
    Quote
    ROMID is not compatible with existing BIOS ROMID
    Asking google i should use the /X option (/X - Don't Check ROM ID).
    Now i got a new error 
    Quote
    Rom image layout detected RomHole is redesigned
    With this message i should use the /K option (/K - Program all non-critical blocks) i was told ... now a was able to flash the chip 
    And the result was: fail 
    I found the "HQ USB flashing tool" here and tried to flash the broken chip again (switching the bios switch from backup to master after booting), but also no luck for me ...
    After a break i had an idea - at which time i can switch from the backup chip to the master chip?
    The bootcode "A2" was the right for me
    At the bios/uefi setup all my fans were running at full speed and i was sure this is because of the broken master chip.
    So again i tried the M-Flash tool from the setup - f**k it will reset/reboot before the flash progress will start - but now i know the time to switch from backup to master chip 
    The tool started and i saw the same messages (everything ok, reset/reboot) as i tried it the first time.
    Reboot - SUCCESS! 
    I wasted about three hours of my live to brick and unbrick the master chip, but i don't know why this happend 
    Maybe this post will help someone to fix a failed bios update.
    YourName

    Thanks for sharing 
    I used M-Flash a couple of times, just remember DON'T remove usb-stick until it reboot successfully to os....

  • Need Help: MSI GT780R Black Screen After BIOS UPDATE,

    Hi,
    I descided to update my bios since it wasnet updated,
    and i found the BIOS and chooced the NON raid One. Downloaded made a Bootable USB Drive.
    and Typed, Afudos.exe And E1761IMS.10H. and it started Updating and in the end it sayd updated.
    i Restarted PC was working then next restart It was Blackscreen, i have since 3 days now reading forums how to fix but theirs not much.
    i have tried removing the Red and Black Cable, that Reset CMOS Settings. it did work, but after Shutdown same blackscreen. tried this option again didn't work anymore.
    i have also tried Updating Bios Blind but doesn't work either im pressing keys wrong. or im not getting into the USB Drive.
    I really need help by someone who has had this issue themselves or handy with computer please i need help
    Thank You!

    RX-8 Thanks for the reply,
    No, i did not use flash.bat when i got to the point to write i wrote. Afudos.exe and E1761IMS.10H i watched a dude
    when he made it on Youtube that's why i didn't include flash.bat.
    whats the right BIOS Update for a GT780R MSI Laptop ?
    is it the NON Raid System
    or the Raid System one.
    i got SSD 128GB Harddrive + 750GB Harddrives.
    Any other ideas how i could fix my issue with blackscreen would be appreciated
    thank you.

  • KT4 Ultra BIOS Update soon?

    Has anyone got any info about the intended release date of the next BIOS update for the KT4 Ultra 6590? It seems the KT4V is getting a load of updates....

    obviously not - lol

  • MSI 270X Hawk - Screen Flicker - BIOS Update Required

    My 270X Hawk has started to flicker - As I understand I need to flash to the BIOS to fix this problem
    Card is set to the "Standard" BIOS mode
    S/N: 602-V303-02SB1309097XXX
    MSI Live Update Reports BIOS as: TV303MS.133
    BIOS Update and Flashing Instructions Required!

    Use >> this <<
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0). Then unpack the provided archive and put the included files (atiflash.exe, TV303MS.134) on that stick. Rename TV303MS.134 to TV303MS.rom. Now boot from the stick. Type atiflash -p -f -noaper 0 TV303MS.rom [ENTER] and let it flash the vbios.

  • MSI GT70 2PC-1044US Dominator Bios Update

    Hello,
    Sorry if this post should be in a different thread.  Currently I have the 2PC-1044 Dominator with Windows 7 Ultimate x64 installed (AHCI), and I would like to know if there is a Bios upgrade available.  The support downloads section does not list the correct version for me to download (Win7 x64).  Also, is it ok for me to install Firmware 1763EMS1.517 and vBIOS 80.04.F7.00.06 without damaging/formatting the OS?
    Below are the current versions of my system
    Bios: E1763IMS.50R
    EC Firmware: 1763EMS1 Ver5.10
    vBIOS (from Nvidia CP System Info): 80.04.EA.00.02
    Thanks

    Read below information first before doing update. On top of that, if you need BIOS update, flash to version 50V first.
    Before you update BIOS....
    http://www.msi.com/files/pdf/How_to_update_bios_en.pdf
    Before you update EC.....
    http://www.msi.com/files/pdf/How_to_update_ec_en.pdf
    Doing firmware update is always risky....

  • MSI H61M-P23 (B3) - Failed BIOS Update, PC Won't Boot

    I attempted to update the BIOS on my MSI H61M-P23 motherboard and the update failed.  Attempted to reboot the PC and no longer have access to the BIOS and the PC does not boot.  Additionally, there are two short beeps in POST.  Any suggestions on resolving this issue? 

    Quote from: keomany81 on 22-December-14, 20:43:21
    I don't recall what the old BIOS version was, but whatever the newest version that's available for download from MSI is what I attempted to flash.  I ran the BIOS update in Windows and my PC froze for over an hour and wouldn't respond, so I powered it down and went to power it back up and now I get a blank screen and two beeps in POST.
    which version exactly you tried to update?
    Quote from: keomany81 on 22-December-14, 20:43:21
    I don't recall what the old BIOS version was
    this isn't usefull

  • MSI p55-gd65 1.8 bios update issue

    Here we go:
    So I prompted myself to update my p55-gd65 bios from...either 1.6 or 1.7? to 1.8  I used the LiveUpdate Online feature on MSI's website.  Seemed to be fine after until my computer sometimes froze while watching streaming flash videos. 
    I thought it was caused by an outdate video driver so I updated it, either before or after the video update (can't remember) I shut down and reset the CMOS settings (took out the battery for +30sec), still froze.
    Decided to Update the Intel 3/4/5 Chipset v9.1.1 provided by MSI, completely wiped the video driver, reinstalled it, still froze.  Wiped adobe flash player and cache from firefox, reinstalled flash...still froze.
    I noticed too late that the LiveUpdate requires 32bit Win7.  and that the manual DL for the bios update I tried installing popped up with an OS incompatibility error.  Does v1.8 not support 64bit? or would it have been better for me to flash the bios update?
    Thanks for any help!

    Quote from: Henry on 24-June-10, 06:30:57
    Can you post a screenshot of CPU-Z 'Memory' & 'SPD' tabs? I don't know on the P55 MB's but on both of mine that RAM runs perfect out of the box on Auto setting in BIOS at 1333, 9, 9, 9, 24, 1T @ 1.47V. Of course CPU-Z will show 1.5V for it.
    here's the screens:

  • MOVED: MSI GT70 2PC-1044US Dominator Bios Update

    This topic has been moved to GAMING Notebooks.
    https://forum-en.msi.com/index.php?topic=253543.0

    Read below information first before doing update. On top of that, if you need BIOS update, flash to version 50V first.
    Before you update BIOS....
    http://www.msi.com/files/pdf/How_to_update_bios_en.pdf
    Before you update EC.....
    http://www.msi.com/files/pdf/How_to_update_ec_en.pdf
    Doing firmware update is always risky....

  • KTA Ultra BIOS Update

    moderating gentleman and friends with experience
    When it wants to do a BIOS Update I must do it with completes version 1,3 ??
    This completes version fixes the problems that fixed the previous versions or I must install all updates that they have published??(1.1 + 1.2 + 1.3)
    By I complete, if my equipment this working well I must make BIOS Update?
    Thanks

    only update for fixes you need
    if not having crc errors with large files leave it be
    you only need update to one you want
    no need to flash 1,2 3 etc

  • MSI K9N Ultra -Failed???

    Hello. I have a problem. In my opinion, it is problem with my MB. I had a DVD-RW Samsung 203B (Sata). Problem: all DVD was closed (i use Nero 6,7,8 Ashampoo and i click Multisesion DVD and nothing), and DVD-RW detect as DVD-ROM. I change DVD, new is ASUS 2014L1T, I re-instal computers and it is same. DVD are closed and DVD-RW is detect as DVD-ROM. Where is a problem. I think, it is MB, but it is wrong Sata port (i change 5 port and nothing) or ....? Pls. I need help.
    Thank

    Quote from: BOSSKILLER on 26-January-08, 23:50:21
    What Nero report about the drive?
    Make sure that Nero is up to date.
    "Drivers I find MSI site. "
    Try with latest chipset drivers from Nvidia.
    "Apacer DDR2 1GB 800MHz  (3x)"
    Use 2x memory sticks only.
    Try with different SATA cable for the drive.
    Hi.
    I have a latest drivers.. I install new drivers from nVidia, from MSI for MB, i found new firmware for my DVD-RW (but is only 1.0)
    I use 1,2 or 3 memory stick. I change a 3 cable. I have instaled Daemon tool Pro with one virtual disc. I install daemon later, as I had a problem with optical drive.
    My info from Nero tools
    sorry: pictures http://s266.photobucket.com/albums/ii264/samurayy/?action=view&current=Infotool.jpg

Maybe you are looking for