MSI K9N2G Neo-FD

http://www.newegg.com/Product/Product.aspx?Item=N82E16813130182
I have been thinking about getting this motherboard to replace a fried ATX EPoX motherboard, however.. I notice on the MSI site itself that it suggests it's a Micro? On the other hand, Newegg just says ATX ... which is it exactly? Has anyone had any good experiences with this board? I'm pairing it with a Phenom

You might have looked up the K9N2GM-FD (Micro-ATX) at MSI website by misstake. The one at newegg is a variation of the K9N2G Neo (ATX) you see on the MSI Global website.

Similar Messages

MSI K9N2G-Neo and Athlon X2 7850 Black Edition - BIOS Options Problem

Hello, i have this MSI K9N2G-Neo + Athlon X2 7850 BE (REVEEN RCCT 0901SP + Tuniq TX2) + 4 x 2048MB OCZ Platinum 1066MHz, 700 watt real power supply, etc...
The problem is the bios v1.2 and new v1.3 that appears Disabled the CPU Voltage option for this cpu, in gray color or default values and i can´t change it. Now the cpu is running well at 3.2 ghz OC (200x16) some stable but not at all, i think it is a weak OC for a Black Edition CPU. Before i was using the X2 7750 BE and was the same problem with the CPU Voltages Bios´s options too.
Why in the bios isn´t enabled the CPU Voltage option ?
And why this Athlon Kuma don´t appear in the CPU SUPPORT LIST ??
This mother says that support CPUs up to 140watts and AM3... is it sure or it is a lie ?
This bios v1.3 is a few days new, Now i have to wait another 5 moths for a new one ??
Thanks a lot.

Quote from: Svet on 05-July-09, 04:59:39
https://forum-en.msi.com/index.php?topic=128250.0
Where you saw that?
Hi Svet... i did what u said me with numpad and nothing happended cause the cpu option is disabled. I think there is some kind of incompatibility between this mother and Kumas Core CPU... whit the 7750BE was the some issue too.
MSI official web page and 140Watts mothers support shows it.
Slds

MSI K9N2G Neo-FD Upgrade

So I won a 9750 Phenom today at work and its the only time I actually liked my boss (was going to buy the 9650 in the next few days too)
So now I want to upgrade my current system now I am looking for a non omg priced board and wanted to get your opinions.
First on newegg it says MSI K9N2G Neo-FD but no such board on MSI site only a MSI K9N2G are they the same board?
board on newegg
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130182
board on msi
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1493&maincat_no=1
This board supports appears to support 125w and 140w phenoms (hooray!)
http://global.msi.com.tw/index.php?func=prodcpu2&prod_no=1493&maincat_no=1#menu
Now I will be using 2x2GB DDR800 PC6400 Memory on the board as well as a 8800GT (will soon upgrade to a 4870)
Link to memory I will be using
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=3404049
Power supply will be a Corsair TX750w PSU which should be able to handle a 125w cpu right?
http://www.corsairmemory.com/products/tx.aspx
With a RAIDMAX SAGITTA 2 ATX-928WS Black
http://www.newegg.com/Product/Product.aspx?Item=N82E16811156091
So in the end the new rig will be
Phenom 9750 2.4ghz (no overclocking)
2x 2GB PC6400 DDR800 Ram
TX750w Corsair PSU
8800GT 512mb GPU (future ATI 4870)
MSI K9N2G Neo-FD
Case RAIDMAX SAGITTA 2 ATX-928WS Black
Everything look ok? Any problems I might have missed that will make me want to punch monitor?

I guess I forgot to edit it...I am using 2x2GB sticks.
My thoughts would be will it fit and can I power it and is there any kind of bottleneck? I wont be overclocking this CPU.
*edit*
forgot to add I also wonder can it handle 2.1v memory? If it doesn't I need different memory.

K9N2G Neo CPU Stepping question.

Hello, I have a K9N2G Neo and I am looking to upgrade to a AMD Phenom II X4 925 but I have a couple questions. Will stepping/revision of a CPU effect compatibility?
I see in the CPU Support that Phenom II X4 925 C2 is supported but would the same CPU but C3 stepping effect weather or not it worked with my motherboard?
K9N2G Neo CPU Support list - http://www.msi.com/index.php?func=prodcpu2&prod_no=1493&maincat_no=1 (HDX925WFK4DGI) Stepping - C2)
AMD Phenom II X4 925 - http://www.newegg.com/Product/Product.aspx?Item=N82E16819103656 (HDX925WFK4DGM) Stepping - C3)
Sorry if this is common knowledge I haven't been able to find information on it anywhere.
Thanks for your time.

Best to ask MSI. http://www.msi.com/index.php?func=html&name=aboutus
The latest in support list is C2 CPU supported by BIOS 1.2 and that dates back to Jan. 2009.
Even the list from this website which are usually fairly up to date doesn't show any C3's.
http://www.cpu-upgrade.com/mb-MSI/K9N2G_Neo_%28MS-7511%29.html
It probably is supported with latest BIOS but don't take my word for it.

K9N2G Neo (MS-7511) Parallel port interrupt

Hi All,
I'd like to use the onboard parallel port of the K9N2G Neo (MS-7511) for a custom designed instrument. This equipment generates parallel port interrupts thus I need to run this port in IRQ driven mode. On older mobo-s BIOS usually have an IO address + IRQ setting for onboard parport, now I can only find an IO address. Any idea?
Thanks
Gabor

We don't know, you have to ask MSI ->>>How to contact MSI.<<

MSI P965 Neo-F (MS-7235) problem booting from USB flash drive

Hi, all!
I was wondering if someone can help me. I am trying to install Windows 7 x64 on my 320GB HDD that is connected to my MSI P965 Neo-F (MS-7235) mobo (The CPU is a Core2Duo 6600 with 6GB of RAM). I created a bootable USB 8GB flash drive using Microsoft's "Windows 7 DVD USB Download Tool" and bootsect.exe (Needed to create a boot sector on the USB drive) from the MS store. I successfully tested the resulting bootable USB drive using freeware MobaLiveCD (Sorry, you'll have to Google "mobalivecd" since this forum doesn't seem to allow external links) running under Windows XP SP3 x86 (32bit). Under MobaLive's QEMU, Windows 7 setup loaded its files and produced an error message basically saying that it could not install Windows 7 x64 under an x86 OS (No surprise there since QEMU is emulating a 32bit processor - The point is that the bootable USB drive I created works).
I then went into my mobo's CMOS and under Advanced BIOS Features -> Boot Sequence -> 1st Boot Device, set the value to "USB-HDD" and rebooted my machine. The USB drive probably was not detected by the mobo under that setting because it proceeded to boot from my HDD which is the 2nd Boot Device. I repeated the same process using each one of the four USB ports in the rear of the mobo (I don't have the optional USB panel that the MSI users manual mentions) to no avail. I also tried setting the 1st Boot Device to "USB-FDD" and repeated the process for each USB port but the mobo still will not boot from the USB drive (It does not recognize it). When I set the 1st Boot Device to "USB-ZIP" and rebooted, the mobo hangs after "Verifying DMI Pool Data ..." which is no surprise since I am not using a USB ZIP drive but a USB flash drive. It appears that under that setting, it recognizes that there is a USB device attached but it is expecting a response (From a USB ZIP drive). I had no idea it would be this frustrating to boot from a USB flash drive! If anyone knows how to make this mobo boot from a USB flash drive, please let me know. Any assistance would be greatly appreciated. Thanks!

Quote from: RemusM on 12-June-14, 17:51:30
The P965 Neo motherboard is 8 years old, so don't expect miracles. .... You need to format the USB stick in the proper way. You may use this utility to do it: hxxp://www.prime-expert.com/flashboot/ Also, it's a good idea to use the first (USB0) connector (controlled by Intel ICH8) for the USB flash drive. Good luck.
Thank You for your fast response, RemusM!
I'm not looking for a miracle. I'm just looking for a mobo that does what it is supposed to do: Allow me to boot from a USB flash drive (I don't think that is too much to ask for even from a board that was made in 2006)!
Thanks for recommending FlashBoot. I see under their "Why FlashBoot" section that it "... does not shift to user the burden of choice between "USB-ZIP" and "USB-HDD" at format time and proper BIOS setup at boot time. ... and every USB disk is formatted in such way that it will work in every environment properly, regardless of current BIOS setting.", so I will give it a try and let you know about the results afterwards.

MSI P35 Neo-F (MS-7360): Computer randomly freezes while playing games

Hi there,
I have reached the end of my technical knowledge right now and I'm not even sure if this area of the forum is appropriate. The problem:
While playing higher-end games like Crysis 2, Anno 1404, Mass Effect 2 etc. my computer randomly freezes and the last few milliseconds of sound are being looped on my speakers (kind of like a buzzing sound).
By "freezing" I mean that my computer becomes unresponsive to any action other than pressing the Reset-Button or holding down the Power-Up-Button (no reaction to Ctrl+Alt+Del, Alt+F4, Alt+Tab, no mouse movement... you get it).
There's no exact timing as to when these freezes occur. The fastest freeze happened after less than a minute of playing a game, slowes one (just today after switching to my newer case with better cooling) took about 2 hours.
This freeze only occurs while my System is under load. No freezes while browsing the web, using office programs, listening to music or watching videos.
System Specs:
Mainboard: MSI P35 Neo-F (MSI-7360)
CPU: Intel Core2Quad Q6600 @2.4GHz
RAM: 4x 1GB DDR2-800 Corsair XMS2
Graphics: Gainward GeForce GTX 560 Ti, 1GB GDDR5 VRAM
PSU: Antec High Current Gamer 620W (upgraded from Xilence XP600, 600W)
New CPU Cooler: Arctic Freezer 13 Pro (upgraded from OEM Intel Boxed Cooler)
New Case: Zalman Z9 Plus w/ 4x 120 mm Fans (Upgraded from a Case with only 1x 250mm side Fan)
2 Western Digital HDD (1x 2TB, 1x320 GB)
1 DVD Reader/Burner (unimportant for that error I guess)
OS: Windows 7 Ultimate 64-Bit
2 Screens: 1x 24" Asus VS248H and 1x 21" LG Flatron Wide W2240T
Since this error is bugging me for quite a while now and since this is not the first forum I'm trying to get help from, here's a list of steps i already took to get rid of it, obviously to no good use:
reinstalled games where the freeze occurred
updated all Drivers (including cleaning old versions in safe mode; also tried older drivers)
updated BIOS to v1.A0
Reinstalled Windows
bought new Case and CPU Cooler to improve Air Flow/Cooling
checked Seating of all components (took out, cleaned, reapplied thermal grease where neccessary, re-inserted)
cleaned old case of dust (obviously no problem in the new case, which is 2 days "old")
ran 7 sequences of Memtes86+ without any errors
ran Prime95 without any errors for about 45 Minutes
ran Furmark for 15 Minutes under full load (burn-in test) without any problems, even though my graphics card hit the 100°C frequency-cut level
ran Furmark and Prime95 simultaneously without any problems
took records of component temperatures and system voltages without noticing anything unusual (at least not after i switched to the newer PSU, which is about 1 Month old - yet didn't resolve the problem)
tested with cyclic removal of 1 RAM device to further rule out RAM malfunction
tested with only 2 RAM devices in dual channel mode (Slots 1 and 3)
tried to reduce RAM clock (800 MHz --> 667 MHz) to no avail
checked S.M.A.R.T. values of HDDs, no issues reported
tested without any background programs
raised/lowered voltages to RAM, CPU and Chipset in BIOS to increase logic circuit stability/decrease heat production
I need to mention: After I transferred my system to the new case, i was able to play longer than average compared to my old case. So I am guessing that improper cooling was part of the problem, yet improving cooling obviously didn't resolve it.
Since these freezes are really annoying and nobody could help me resolve this so far, I'm hoping to find some new ways of narrowing down the problem or even getting rid of it here.
Regards
Sebb

Quote from: Bernhard on 10-July-12, 13:15:30
Lets be realistic. A system with a 560TI is recommended to have a around 31Amps under full load, a CX500 would be sufficient.
Have you monitored your CPU and memory utilisation ?
As suggested before, test the GPU in another computer to see if the behaviour is the same.
Whew, I thought for a second there that my common sense had left me when I saw that 60-Amp-Post ^^
Yes, I monitored CPU and RAM usage, there is no recognizeable pattern to be seen and it almost never happens under full load.
I will see if a friend of mine can test my GPU on his computer, and I will test it underclocked right away.
Though one more question regarding that: Should I only underclock GPU Core Clock or both Core and RAM clock?

MSI P965 Neo PCI-e lock?

Hi!
could any of you tell me whether or not the MSI P965 Neo-F board has an option to lock the PCI-e clock?
My plan is to tweak the FSB to 333 (which implicates a 333/266 = 25% overclock), which I've read is more then easy to obtain with a Core 2 Duo 6300. I just don't wanna ruin the rest of the system by getting a PCI-e busspeed of 125.
So I'm really curious if this board has either a build-in lock @ 100/101, or some option in the BIOS to lock the bus.
Thanks!

well you could just try raising your fsb to 333Mhz and see what happens. done it with mine no problems at all no other tweeking either. lots n lots of people have done the same without a problem.
check out the overclocking and modding forum here, n see for yourself.

Problem with S-ATA optical drive(MSI 875P Neo)

Ahoy MSIers,
I am in a most dire situation, and before I go to spend money on some computer-tech guy to solve my problem, I thought maybe you could help me.
*My PC specs:
Intel Pentium 4 Northwood C 2800Mhz
MSI 875P Neo
A-DATA 512Mb RAM DDR 400 * 2(1024)
PowerColor Radeon 9800Pro
Western Digital Hard Drive 80Gb 8Mb buffer P-ATA
Pioneer DVR-212D S-ATA (The main issue here)
Bios - AMIBIOS - VERSION 3.31a
Windows XP Pro - SP2
Until 2 days ago I owned an MSI CD(P-ATA) burner which was virtually dead.
2 days ago, It died completely, So I decided that I will not just replace a CD burner for a CD burner... no! I will buy myself a new shiny DVD burner!
So I bought myself a Pioneer DVR-212D(S-ATA) and I went on with installing it.
I plugged the Serial Power Cable from the PSU to the drive, and connected the drive and the S-ATA port on my M-Board with a serial-ata cable.
I booted up, and found that the device was nowhere to be found although power is being transferred to it(the drive opens and closes when pressing it's eject button).
I searched the net and found that I was supposed to "enable" S-ATA in my BIOS.
Tried that, yet every setting I tried besides the default setting gives makes the computer freeze for a few minutes at the MSI logo and then a "friendly" error massage appears, usually it's something like
"4th master drive ATAPI incompatible" ( the number changes, I haven't got a clue why).
Searched the net a bit more and found almost nothing... most s-ata "problems" were about booting from a s-ata hard drive....
I am getting desperate, So in order to maximize the chances of me getting help solving this issue, I took a few pictures of the BIOS and the inside of my case... maybe it will help, I dunno.
Here are some pics:
The S-ATA cable connected to the Mother-Board
Back of the DVD burner with the S-ATA cable attached
BIOS - standard CMOS features
BIOS - Integrated Peripherals
On-Chip IDE configuration
P.S
I have a DVD ROM(Toshiba, nothing special) and I would of course occasionally like to burn Dvds/Cd's from my DVD ROM to my DVD burner. However, seeing as the DVD burner is S-ATA, there is no physical connection what so ever between the two drives(unlike in P-ATA connection where each cable has 3 "connections", 2 for drives(hard or optical) and one for the Motherboard) I really don't know how I can "achieve" this.

A friend of my father's, whose occupation is a computer technician toke a look at the PC and bios settings today.
WE tried EVERYTHING and It still wouldn't work so we concluded that the problem is probably in the hardware.
There were two possible "suspects" here - The Mother Board(specificially the S-ATA controller/ports on it) or the drive itself.
We connected the drive to my sister's computer and it worked like a charm.
So the answer was clear - something was wrong with the board.
I replaced my S-ATA drive for an IDE drive, and all is well.
Well
that's the end of that story

Problem with my MSI P35 Neo MotherBoard [Cannot find harddrive]

Hi guys.
So, I've been trying to install Archlinux for a while now, and I've been trying to figure out what problem Is by myself, and I've been asking a bunch of people, but it seems that it's going to a dead end.
What we figured out, and what we "think" it is, is that the controller on my motherboard does not support the system, and my SATA disk that I am trying to install on.
What i have tried is that.. I've followed the "beginners guide" to install arch linux, and when i noticed that i got a big problem with my harddrive i asked some people for help, tough we cannot figure out what the problem is..
Firstly i boot up with my ArchLinux CD.. Then i write km, to change the keyboard layout. Then /arch/setup ofcourse . After that when i try to partitionate and set mountpoints for filsystem it does not show any kind of hardware at all. So i tried to partitionate with gparted and then boot up with Archlinux again to install all my packages etc etc. But it seems like it does not write the information to anything.
This is a big problem for me cause i really want my Arch distribution to work, so please guys.. Help me!
EDIT
Just in case you wanted to know.. My motherboard is a MSI P35 Neo
Last edited by rahanjam (2008-10-07 14:03:35)

pointone wrote:*snip*
I don't have this AHCI option. So i don't know what to do else. Do you know?
AD28 wrote:*snip*
Do you mean, that my mobo doesent support linux, and that i cannot have it?

Unable to install windows XP på MSI K8N NEO

Hi!
I have problems installing windows XP (SP1) with MSI K8N NEO Platinum Edition. After I bootet my computer (I build it myself) I noticed I had extrem cpu temperatures (65-70 degrees celcius). A quick search on the net indicated that a bios-upgrade might solve the problem, as my current bios probably showed too high temperatures.
As I had already installed windows XP i downloaded the bios and upgraded using the msi-windows-bios program. And, after the reboot my cpu temerature was 20 degrees lower (45 degrees celcius), which is more normal. But during the bootup of windows I got a blue-screen (or, actully a blue blink, just for a nano-second), and then my computer rebooted.
As the system were fairly new and didn't contain any importaint data, I decided to try to make a fresh install of winXP. But now I get a blue-screen during the installation, when the progress-bar says "installing devices", the blue screen appears when it is about 75%.
The installation of XP went fine before the bios upgrade, and I used XP for several hours without any problems at all - except the high cpu temperatur. Now my cpu temeperatur is acceptable, but XP wont install/boot.
I have tried to disable all the integraded devices (such as firewire, network, sound card etc) in the bios menu, but the XP install still provides a bluescreen during the installation of devices.
My system:
A64 3000+
1024Mb RAM (corsair value, I believe)
Samsung SATA 160Gb HD
Matrox Millenium G400 (I know it is old)
NEC 2510 DVD Burner
As I said, this is propably caused by the new bios, as it did work with the old one. I have also tried "Load failsafe defaults". Do you guys have any ideas of how to fix this? Should I (can I) downgrade my bios (I do not have a floppy drive in the computer).
.wirrum

Hi wirrum,
I see you are Swedish (the på was a give away).
I recently aquired a MSI K8N Neo2 from Komplett - where did you get yours from? maybe that have a bad batch because I am seeing the same problems as you.
I have two different problems , the same stability problems you are seeing and problems with the keyboard (ps2) not always starting up. I'm currently at Bios V1 and after seeing your problems I might just wait with V1.1 unless everything else fails.
Im considering an RMA to komplett soon and asking them for a motherboard that works (maybe from another manufacterer).
I have a decent PSU (Antec Truepower 480) and DDR400 from Kingston thats on their reccommended list, no overclocking, stable settings, I built the thing with ESD protection and carefully. Not overly impressed right now.
Some suggestions - turn off AGP Fastwrite, turn on SATA DMA access if you are using SATA. Turn off any Overclocking, move your memory around , try just one stick in DIMM 1 see if that helps.
I finally managed to get through an XP install but it took 6 hours to install. And it will occasionally stutter then shutdown entirely.
Quality..

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

MSI P45 Neo-f with intermittent boot problems

Current system:
*CPU: Intel core2duo 4300 1,80GHz
Mobo: MSI P45 Neo-F LGA775
*Memory: 1 Kingston 1GB PC2-5300 667MHz DDR2 and 1 Dane-Elec 1GB PC2-5300 667MHz DDR2
Videocard: Club3D Nvidia 8800GT 512MB GDDR3
*Hard drive: 120GB IBM deskstar 7200rpm Ultra-ATA/100 (yes I realize it is known as the deathstar, but it hasn't failed so far, I do back-up because I'm paranoid
PSU: Real Silent Nexus NX-5000 500 watt
*Soundcard: Soundblaster Audigy
OS: Windows XP home, service pack 2
*Lite-on IT dvd-rom drive
*floppy disk drive
I also have 3 case fans spinning away in a marginally large Chieftec Dragon tower.
The parts I marked with an asterisk (*) are parts that I removed from my old rig and re-used.
I'll try to give a clear rundown of my problem and the steps I've taken so far.
3 days ago I acquired the P45 Neo and installed it into my system, together with the 8800GT videocard. I was still using my old PSU, a Chieftec 360watt. This PSU served me well for 7 years, but it was starting to build up noise while trying to keep up games on my old rig.
I had some trouble getting the system to boot, I tried changing some of the 4 pins wires going to the hard drive and the dvd drive. I don't know if it was luck or if I managed to divide the load properly for the system to boot. But I succeeded into booting up, got into the bios and eventually installed WinXP.
As soon as it was time to install the videocard drivers, it stopped responding. I assumed it was a power issue, since I could only install the 20pin and 4pin cpu, but my Chieftec PSU didn't have a 24pin plug to the mobo - and it needed replacing anyway! So I bought a new 500watt PSU that had all the required plugs and more wattage.
I installed the new PSU, checked every connection and pressed the power button. 'Lo and behold, the computer starts up. I install the videocard drivers and it proceeds with no problems. I try to install the soundcard, but the cd says I don't have one installed. I fix that by going to the System list and install the drivers from there. I install a firewall. By then I have successfully rebooted the computer 3 or 4 times. I decide all is well and turn off the computer. But I realize I wanted to check up something on the internet.
I press the powerbutton. The PC power light go up for just a fraction of a second. I can see the blue LED of one of the case fans switching on just as briefly - then it goes out. The computer keeps trying to turn itself on. It looks like it's hickupping to try and boot!
I turn off the PSU power on the back-side because the computer keeps trying and wait for a bit. After 10 minutes, it still doesn't work. I leave the computer for a bit and return an hour later. The computer then starts up with no problems. I turn it off after a few hours, do a reset, start it up, no problems. But then the next day it happens again.
It's pretty tough figuring out what the problem is because it looks..almost random. I considered it could be a heat issue, but sometimes it *does* start up just after it's been turned down. Checking the bios shows no strange temperature shifts.
Hope anyone can help me, because I do not want to go back to my old Asrock mobo

While powered down I cleared the cmos data, removed the Dane Elec DDR2 module and set the bios to optimized defaults. Computer restarted to WinXP with no problems (it has been off the whole night). I shut down WinXP, wait a few moments and then turn the computer back on. Alas, it won't start and starts hick-upping. I turn power off at the PSU again, so it stops.
Now I try switching out the Kingston module instead. By now the computer has been off for 10 min (while I write this entry on laptop). I press the power button on the PSU and then the power button on the front. There is a short pause, lasting a second. The computer turns on, longer now, but it only lasts 2 whole seconds before it turns off again and goes on again (I believe now you can call it powercycling). It repeats this process until I shut off the PSU.
I check to see if I have installed it properly and try again but it starts powercycling again.
15 min pass, I put the Kingston module back in, press the power button and voila, this time it does start. WinXP shows up, no problems. I leave it on for a bit and then shut down. And when I press the power button again - the feeling of dread returns, when it starts hickupping again.
I'm going to see if I can install one of the memory modules from my housemate. Then hopefully tommorrow, I'm going to try if I can test a different PSU, since I see someone else on the forum - who recently posted, has the exact same power supply and also has boot problems, coincidence... or not ^^;.

VCORE PROBLEMS WITH MSI P35 NEO F

To see if I can help or at least explain what's happening, buy a MSI P35 NEO F for using a quad, the topic is as follows handling vcore is rare
First thing I can not put less voltage that the cpu brings default, second what happens next if bios setting 1.3250 vcore for Quad, once in both windows everest, cpuz, like others programs tell me that this placed on 1.40 vcore which is excessive for the speed at which the quad, this is so in this mobo? Their story that was installed version 1.20 bios which handled vcore%, the upgrade to version 1.40 and is now handled in decimals (numbers) vcore, but still the problem
You pull more vcore which setting in bios and if you want to download the vcore eg put 1.26 vcore not let you because it takes the vcore default of cpu minimum.
i'm not crashing or problems with the temperatures, but nobody likes to have more vcore's necessary.
Wonder because being rookie of this mobo, maybe there's some bios version that fixes this bug or someone knows something else, thank you guys
C2Q Q6600
2 X 1GB G.SKILL 6400
PSU 550 MODULAR TOPOWER
-- SORRY FOR MY ENGLISH --

You can slap 1.6v in that CPU and temps won't rise that much.
Core 2 Duo/Quad operates @ 1.250-1.425, anywhere in between those values is perfectly stable for Intel stock cooler and frequency.
Absolutely nothing to worry about. But if you want to complain about >1c I really can't see the sense in that.

MSI P35 NEO & dual core center problem

hi, i have a problem with my motherboard msi, Bios 1.2 and the dual core center 2.0.0.8 ,since days ago, the msi dual core center 2.0.0.8 so many times shows fan speeds alerts false alarms from the cpe temp, for that reason, i upgraded the appl to 2.0.1.6 ( the last),i set the oc level to 25% like with the older version, but time later the pc crash and put a black crash screen and it dont let me to overclock my cpu , i get back to 2.0.0.8 but the fan alarm dont stop, and i dont know if the newer version fix this problem
any help?
sys specs
msi p35 neo bios 1.2
core 2 quad q6600
2 gb value ram
psu duck

right, but i like to use msi dual core center, because i dont like to have the pc overclocked all the time, anyother suggestion for this?
thanks for the reply

MSI K9N2G Neo-FD

Similar Messages

Maybe you are looking for