MSI KT3 Ultra 6380E and (RAM)

Will the KT3 Ultra(6380E) support a 512mb DDR RAM at 400mhz?

I`m thinking the MB`s and memory are backwards complient, meaning sure 400MHZ memory will run in there, but the MB will not be able to run it @ 400MHz only 333. Right from MSI product info page.
Main Memory
- Supports six memory banks using three 184-pin DDR DIMMs
- Supports a maximum memory size up to 3GB
- Supports 2.5V DDR200/266/333 DDR SDRAM DIMM

Similar Messages

[VIA] MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card

Does any body out there know if a MSI KT3 Ultra-ARU and a MSI FX5900XT 128MB DDR Video Card will work well together?

like the grayone say, is true. for more ensure, try and search the graphic cards support list for your board at MSI (Sorry cause i don,t no is where the site located)
in my opinion, most is compability for your card, when is a AGP slot.
Except the new one like the AGP slot, call AGR( Accelaration Graphic Riser slot) that really need to find a compatibility graphic cards.....

MSI KT3 Ultra ARU and S2K Bus Disconnect

Hello
I have a MSI KT3 Ultra ARU and a AMD Athlon XP 2600+ (266 FSB version). I wonder if I have support for termal diode in both CPU and mainboard.
Is S2K Bus Disconnect and CPU HALT Command detection the same thing?

Quote
KT3 ultra's I believe were the first boards capable of reading thermal diode inside of AMD XP (Palamino/T-bred/barton, etc) and higher cores.
Not the first, but they were up there as being among the first. A few KT266 boards implemented the circuitry to read thermal diode. Second or third revision boards, or new models, based on KT266A and even KM266 began implementing the thermal diode circuitry.
KT3 Ultra has thermal diode read circuit:
Quote
MSI™ KT3 Ultra...can support AMD Athlon™ XP 2000+ processors, AMD Athlon™ and Duron™ plus it latest technology feature - Thermal Diode Circuit.
- MSI Press Release

MSI KT3 Ultra ARU and 200gb Hard Drive

I just bought a 200gb Hitachi Deskstar and loaded up Windows XP and noticed that the drive size is only 137GB instead of around 200. Does the KT3 Ultra Aru no support 200gb Hard Drives? What do I need to do to make this work? Thanks in advance.

The board supports such drives. But: http://support.microsoft.com/default.aspx?scid=kb;en-us;303013

Kt3 Ultra 2 and ram

Hello all first excuse me for my bad english (im french and only 14)
So i bought 5 weeks ago two sticks of memory 512 samsung pc3200 (400mhz) on another thread (in another forum) i read that the two sticks will adapt (i dont know if we can say this word in english) to the 256 pc 2700 that i already have but in my case i wont in fact when i put the 256+512 there are bugs like this . I dont have these bugs with only the 256.
I dont really know what's the problem i think the 512 doesn't adapt to 256 or that the 512 o/c the 256 so i need the solution to put the 512 to pc2700
Thanks all

Joy4ever, I have not heard of Mosel ram myself. I am not sure what kind of ram it is, by that I mean cheap generic or average. I do strongly believe that your memory is not a quality brand. As such I would have to question the integrity of the ram first as the root cause of your problem.
Perhaps some other users could make some authoritative comments regarding Mosel ram.
Of course as osnavi says psu could be another issue here.
Nevertheless, I would try to increase the voltage supplied to the memory modules by a max of 0.2v (no more). Try 0.1v first. DDR ram runs at 2.5v so try 2.6v first and then 2.7v but if 2.7v does not work, I would not go above this level.
If that fails and your psu is ok, then try to borrow some quality ram to try in your rig. At this stage I would not buy anything until you are sure of the problem.
By the way can you also check your memory timings they are located in your bios>advanced chipset features>dram timing control. Perhaps these were set to work for the pc2700 ram but are too tight for the Mosel ram.
Can you also do what osnavi says and tell us your psu with the 3.3, 5 & 12v rails. Also the combined 3.3 & 5v max wattage. The KT3 Ultra2 draws most of it's requirements from the 3.3 & 5v rails. The only thing it uses 12v for is are the fans, HDD and opticals.
As a guide 128Mb of ram uses about 8-10W from the 5v rails. If you have 1Gb of ram then this would push the total requirements for the ram alone to 65-80W.

MSI KT3 Ultra-ARU error

Hi everyone, my motherbord is giving me the 8 or 9 beep code
(8 = Display memory Read/Write test failure, 9 = ROM BIOS checksum failure) guess I need a new motherbord?
I have a MSI KT3 Ultra-ARU and it has Promise 20276 (raid 0 and 1)
The beeping started after I did a clean install of winxp then a blue screen of death pop-up, when it boot up there was a blank screen then starts to beep
I Strip the system down to RAM, processor and video card only and even change the agp video card to a pci
and clear the bios by change the jumper and taking out the battery
any idea what it could be?

Neither processor or memory is supported. The processor is 166x2 (333) MHz. http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=11&kind=1
Edition: I would like that PSU!! - Eh, now that the processor wont work... Do you still have need for your PSU?
http://www.extremeoverclocking.com/reviews/cases/Ultra_X-Connect_1.html

Msi kt3 ultra aru ... Cnet pro200 Ethernet problem..

Hi guys
i have this wierd problem i cant figuer out
i just bought a new mobo an msi kt3 ultra aru and amd palamino xp 1800 512 mb kingston pc2700 ram
asus geforce (2) v7100 pro mx-400
the ohter stuff i have is imb deskstar 40gb maxtor diamond 7gb asus dvd and plextor 12/10/32 cd writer
the only pci card i have installed is Cnet pro 200 100/10Mbps Ethernet adapter..
i made a clean install whit winxp pro and i have installed the 5.40 bios and the new 4 in 1 from via and newest nvidia graphics driver
and im on broadband using a cable modem (dialup)
the problem is when i start the computer and windows is loadet i takes up to 30 - 45 sec before i can connect to the internet and proggys like virus protectors and firewalls also after 30 - 45 sec
but if i take the r45 cable out of the modem and start the computer it loads everything in a sec
then i plug the cable in a agin and i have acces to the internet
i have followed mr stevo and racerx27 bios settings
is there any one out there
who have a solution to my problem?
if so then i can be reached at [email protected]

Think your network (TCP/IP) settings are wrong in some way..

Msi kt3 ultra, msi gf4 4200 tvout problem

I have a msi gf4 4200 64mb card and i have a msi kt3 ultra aru and windows xp,
my problem is tv out is garbled in pal , ntsc is grey (iam in europe), the colours seem inverted blues are red, etc and theres a ghosting effect around moving images like in videos or around the cursor
Ive tried everything from default mem setting , to high performance , tried diferent driver sets , tried windows 2000, tried via chipset drivers, latest msi, nvidia gf drivers, pal b , g , i , 60hz, diferent resolutions, clone view, single output to tv, stretch view , nothing seems to fix it, the only thing that comes close to fixing it is using the tvtool http://tvtool.info/ with color fix correction activated, but the images isnt stable its got a weird strecthing, shimmering effect on the bottom half of the tv image
Iam sure that the problem is not tv or cable related because i tried a friends p4 (board msi sis 645dx) with the exact same model gf4 4200 (not my one) with my scart cable and tv set up and it worked fine.
Could it be a voltage problem? ive even tried upping agp and core voltage a bit to see if helps, and nothing

mhuizing,
nope havent tried a diferent tv , but it should work , i tested the connection with a friends computer
exact same gfx card model and it worked fine!
My old system leadtek gf3 ti200 , epox 8kha+ worked fine with this connection.
Iam using a scart cable to a video , then from the vid to the tv via antena cable
i upgraded and voila, i got some headaches for free :P !!!

MSI KT3 Ultra ARU 5.7 BIOS and SoudBlaster Cards - Audigy

I have flashed my BIOS to 5.7 Version and my sound card start to make a lot of noise (crackling) when play AC3 or DVD. If you dont want to use the new AMD CPU 333 FSB you dont need to flash the BIOS - I have Flashed to 5.6 again but, if you want to use a 333 FSB CPU you can flash the BIOS to version 5.7 and if have sound problems use the PCI latency patch for VIA chipsets.
VIA chipset MotherBoard owners who have through all of the above and still have sound problems with their Soundblaster cards, might want to look into the PCI latency patch for VIA chipsets - get it here:
http://www.georgebreese.com/net/software/
(scroll down the page there just a little to get to it).
There's also a similar page about resolving sound problems on Via chipset based computers here:
http://www.deinmeister.de/mvp3_zlt_e.htm
I hope this post help somebody
Mário Silva from Beja - Portugal
My System:
MSI KT3 Ultra ARU
Athlon 2400+
512 Kingston PC2700 DDR SDRAM
MSI Geforce4 Ti 4200
SoundBlaster Audigy
Windows xp Pro SP1
400W PSU
Creative Drx3
Pinnacle PCTV pro
HDD Maxtor 80 GB UDMA 133
DVD Pioneer slot in
RW Samsung 48x16x48
Creative WebCam Go
UPS 500 VA
Monitor Sony 19" E400E

Since my chip is an unlocked, I cannot easily run it at the default, but I can underclock it. At 100x6.0=600mhz, USB does not work, as well as 100x12.5. Same with 133x6.0 and 133x12.5. It appears to make no difference underclocking or overclocking.
I downloaded the right BIOS listed on MSI's KT3 Ultra-ARU page. I don't think the BIOSes are different anyway, since the same files, changelog, and etc are also listed for the Ultra-2 board.
A thing to note, that this is the onboard VIA-controller USB ports doing this. My Ultra-ARU's NEC-controller USB 2.0 ports work fine in both Win2k and Linux if I hook my mouse and keyboard up in those. This is not an ideal solution for me though.

MSI KT3 Ultra-Aru (KT333) and Duron Applebred??

Hi, welcome,willkommen,witajcie,dobry den, ... (I know this word in 11 languages)
I have MSI KT3 Ultra-Aru (KT333) and J want to buy AMD Duron 1800MHz(Applebred).
Does my motherboard support that processor?? It will work without problems??

Quote
Originally posted by osnavi
pk.master: It doesn't make any sense to discuss about the answer to your question. If MSI says your Mobo doesn't support that CPU and people who know what they say, agree with that, Why argue ? If you want, go and buy it, as at last you are the one to decide what to do.-
in msi website the 333 fsb cpus are not supported too in kt3 ultra-ultra aru but they still work... so it make sense to discuss if applebred work or not in those mobos.

MSI KT3 ultra aru Western Digital 200GB raid problem

Hi!
This is what I've got.
KT3 Ultra-ARU (MS-6380E)
AMD 2000+
256 MB 333mhz RAM (AMD Compatible)
Seagate ST330630A 30GB (an old drive)
Maxtor 6L080J4 80GB
Maxtor DiamondMax Plus9 6Y080L0 80Gb 7200rpm 2Mb UDMA133 Fluid IDE
Western Digital Caviar WD1800JB 180Gb 7200rpm Special Edition UDMA100 IDE
Western Digital Caviar WD2000JB 200Gb 7200rpm Special Edition UDMA100 IDE
Promise 100 IDE-controller
Creative Geforce MX 440
Lite-on LTR-40125W
NEC ND-1300 DVD
And the configuration:
IDE1: Seagate (Master)
IDE2: WD1800BG (Cabel Select)
IDE3(Raid1): Maxtor 6LO80J4 (Master) and Maxtor 6Y080L0 (Slave) raided as an single drive
IDE4(Raid2): WD2000JB (Cable Select)
IDE5(IDE-controller1):
IDE6(IDE-controller2): NEC ND-1300 (Master) and Lite-on LTR-40125W (Slave)
And the Software:
I've updated all the software drivers so I've got the newest and I'm currently runnign Win2k SP3 with almost every patch installed on it.
And finally the problem:
When I've hook my WD2000JB to the on-board raid everything seems to be working normaly. The bios finds the drive and makes a new array. Win2k boots up and finds the drive and I can create an partition. But when I've try to format it it the computer starts to freeze for a while and then acts like normal again. The HDD-led blinks as it should during the "normal" time, but when the comp. freezes it stops blinking. The formatation stops at 7% and the HDD-led stops lighting. I don't get an error eventhough it was several hours since it stoped. And the formatation takes like 30min for 1%.
When I connect the WD2000JB to the IDE3 I can format it and it acts just like normal. I even did a full system test with the System tool found on Western Digitals support site and it didn't find any errors. But when move it to the raid-IDE the errors return. I've get Error reading / writing to disk and when I've did a chkdsk I've got the "Coudn't use Device) so I did a scandisk and it found very very many errors so it completly ereased everything that was on it.
And when I've run Western Digitals program again i've get an error (Disk error read/writing) error code: 0113.
Can it be that the Western Disk doesn't work well with Raid? I've haven't heard anything about that, so...
Best regars,
Mathias

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I've had similar problems where my system becomes very unstable at higher bus speeds. Installing Windows XP simply didn't work very good. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.
Check your PSU and your bus speed settings...

PSU Query for MSI KT3 Ultra-ARU running 3000xp

Hi There,
Before buying a new Motherboard I was just wondering if the problems I'm getting are related to the PSU which is about 5 years old. I've just upgraded my processor to a Athlon 3000 XP 333 FSB which goes into the MSI KT3 Ultra-ARU (MS-6380E v1.X) motherbaord, which I've upgraded the Bios to version 5.7, I've also upgraded my graphics card to the Leadtek Geforce FX5900XT which also plugs into the PSU. When setting my fsb to 166 my PC either won't boot or when I try to run say 3DMark it just freezes, but when I set my FSB to 133 it works fine. I was wondering if it is trying to draw too much power from the CPU.
I don't really know how to write the PSU details down correctly so I've just copied everything from the unit.
Power Man MN :- FSP 300 - 60 BT
AC Input - 115/230v~, 10/5A, 60/50 HZ
DC Output - +3.3V 14.0A(org), +5V - 30.0A(red), +12v - 11.0A (yel) + 5VSB
- 2.0A (purp), -5V - 0.3A (white), -12V - 0.8A(blue)
Fuse Rating 6.3A, 250V
Max Output Power 300W (+3.3V&+5V=150W Max)
Hope this makes sense,
Thanks in Advance,
Paul.

Thanks for that, What would you got for between these two :-
is 550w better than 420w? and is ATX 2.03 just the normal ATX size?
Hiper PSU ATX 420W Active PFC SF-420TS Dual Fan, Silent/Temp Ctrl
1,PRODUCT FEATURES:
Active PFC;
Double Ball-Bearing Fan;
Dual Fan;
Gold Plated Connectors and fan grill;
Adjustable fan speed - Silent function.
Product Description Hiper 420TS - power supply - 420 Watt
Device Type Power supply
Form Factor Internal
Specification Compliance ATX 2.03
Output Voltage +3.3, ±5, ±12 V
Power Provided 420 Watt
2,Q-Tec PSU ATX 550W Gold PFC Dual Fan PSU for PIII/AMD/P4 CPUs
PRODUCT FEATURES:
550 Watt PSU;
Suitable for ATX systems and Pentium 4;
2 fans inside for optimal cooling;
Noise level less than 33 dB (A);
Complies to latest PFC power distortion standards.
Product Description Q-Tec Dual Fan Gold power supply - 550 Watt
Device Type Power supply
Form Factor Internal
Dimensions (WxDxH) 15 cm x 14 cm x 8.5 cm
Input Voltage AC 230 V
Power Provided 550 Watt
Thanks,
Paul.

Broken component on MSI KT3 Ultra-ARU mainboard.

Hi Everyone,
A friend of mine has an MSI mainboard which has a broken component due to his screwdriver slipping off the CPU clamp while installing a new CPU.
The mainboard is an MSI KT3 Ultra-ARU (MS-6380E) ATX Revision 1.0
The broken component is next to the CPU socket (between the CPU socket and the chipset fan) and is labelled L14 on the mainboard.
I believe it is a Ferrite bead inductor/choke.
We have been unable to find the broken part and would like to replace it. I can fit a new component if I can find out the value of the broken inductor/choke in millihenries or microhenries or picohenries.
Would someone with an - MSI KT3 Ultra-ARU (MS-6380E) ATX Revision 1.0 - mainboard, please take a look at the component labelled L14 and let me know what the numbers on that particular component are?
You will probably need a magnifying glass to do this, unless your eyes are very good!
If you know the value of this component, please help!
I would welcome any information on this, it's a shame to scrap a mainboard because of a component costing only a few cents/pence.
Thanks in advance to anyone who helps on this, I appreciate you taking time and trouble to help.
Dave - needtoknow.

Hi Bas,
I got the part I needed but not from MSI, they would not sell me one, so I went to a USA company called Mouser Electronics.
http://www.mouser.com/
The part cost me only 34 cents US, shipping was $6.00! So for about £4.00 UK I can fix the board. Better than £20.00 by far.
You can order even very small parts from mouser as a one off, something you can't do with most UK companies. Their range of stock is *huge*.
Thank you very much for getting the info about the part from MSI for me. I could not have repaired it if you had not helped me with that, so I owe you.
Dave, needtoknow.

MSI KT3 Ultra-ARU with GeForce 4 Ti 4200

Umm...
My PC keep freezing when I play a 3D Game like Warcraft III, GTA 3 or Neverwinter Nigths.
Sometimes it's freezing after 2 mins, sometimes I can play like a half hour.
When it's freezed, Windows don't work either so the whole comp is messed up then .. and I have to reboot him.
I post this here cuz I heard that those new GeForce Cards have some compatibilty probs with mainboards ...
maybe ... someone asked this already ... or just knows a soulution ...
Hi-Tak
My Comp:
AMD K7 1200 "C"
MSI KT3 Ultra-ARU
512MB Take-MS Infineon Ram
GeForce 4 Ti 4200 (Gainward)
D-Link Ethernet Card
Tekram SCSI-II Card
Fortissimo I Sound Card
Enermax 430W

hmm...
I got an Majesty Twins Cooler (TTC-MT1AB)
that one has ball bearing and everything.
It's mounted correctly and with silver Thermal Paste
CPU is constantly at 50 - 55 deegrees
Chassie at 35 - 40 deegrees
is this to much??
I will check again while playin...
thx for the hint
Hi-Tak
Imagination is the Crazyness of your life !!!

MSI KT3 Ultra ARU Mem timing problems?

As experienced by myself as well as Maximum PC Magazine during testing. Using high quality memory such as Samsung PC2700 DDR on the MSI KT3 Ultra ARU, if you set the cas latency timings to the most agressive settings, next time you try to boot into Windows, your OS crashes and the registry gets corrupted. Also the board actually interprets CAS 2.5 memory as CAS 2. I am sure a BIOS update will fix this problem, however who else has had this problems?

Quote
Originally posted by bikernut
Hi MSI MAN
I to have top quality ram, but my board reads the CAS settings correctly.
not for sure what the difference is between xtreme memory modules and,i guess,plain memory modules.installing samsung pc3200 256 ddr into msi kt3 ultra2,was wondering if you have had any compatability problems with your type of memory.have posted to three different forums with no results.

MSI KT3 Ultra 6380E and (RAM)

Similar Messages

Maybe you are looking for