MSI KT3 Ultra2 and S-ATA

I'm wondering if my MSI KT3 Ultra2 with a S-ATA controller card will support S-ATA?
If so, will S-ATA2 work?

yes, if you buy a SATA2 add-in controller card, then you can use it with SATA2 drives

Similar Messages

MSI KT3 ULTRA2-C and AGP compatibility

Hi, I'm just about to buy a new motherboard these days, MSI KT3 ULTRA2-C, with an XP 2000/2000+ and memory, but not a new video card, since i can't afford it right now. I only have an AGP Creative 3D Blaster Banshee 16 MB, but it is a 3.3v agp card (AGP 1.0). I was wondering if this motherboard can support it, i checked in a lot of places, including the manual and it doesn't say anything about the voltage it can take, neither if the AGP slot is universal or not (i.e. if it can support both 1.5/3.3v or only 1.5v). The manual for the KT3V specifically says '4x 1.5v only', but this one just says 'AGP 2.0 1x/2x/4x'. I really need to know this since otherwise i'd have to wait two months to afford another video card. I also checked another post here with an answer to a page with AGP explanation, but it didn't help. Thanks you very much, really

One AGP slot
- AGP (Accelerated Graphics Port) specification compliant
- Supports AGP 2.0 1x/2x/4x
so whats the problem,your fine there
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=357&MODEL=MS-6593

MSI KT3 Ultra2 very low record level 2

i speak spanish, sorry.
well, i have an MSI KT3 Ultra2 MS-6380E, but, the level of record y very low, with diferents michrofone, i know of computer, but i can´t have aceptable record, and when tild MIC BOOST the noise can´t use messenger by my modem transmit every time. I have microfone genius.
your "mic boost option" insert noise?, (with microfone disconected )
¿chasis need ground conected? (i have not conected)
¿the mother is damaged?
¿i need an special michrofone?
¿ is noise of ventilator?
thank you very much
Walter
Argentina
Athlon XP 1800+, 256mb PC2700
MSI KT3 Ultra 2 6380-E AC97 Audio
Maxtor 40gb 7200 Rpm DiamondPlus D740X ata 133 8,5ms
Abit Siluro Geforce 4 MX440, DVD PIONER 16X,
450watt Power Supply

Did you mean you can't record a voice at a audible level ?

MSI KT3 Ultra2 uses VT8235 with KT333

MSI KT3 Ultra2 uses VT8235 with KT333. Can this be possible and what North/South Bridge Link is used?
VIA site illustrated VT8233(A) with KT333 and VT8235 with olny P4X400. ?(

The standard KT333 southbridge on MSI's KT333 boards is a VT8233A, which already supports ATA-133. USB 2.0 in the southbridge is the real difference. Hope it works as well as the NEC chip, which is rock solid with my USB stuff. Love it.
Regards.....

MSI KT3 Ultra2-BR

Geachte heer, mevrouw,
Jullie hebben in de beginpagina staan dat er een new release is (in juli) van de MSI KT3 Ultra2.
Deze is echter in drie versies verkrijgbaar.
De versies Ultra2 en Ultra2-R zijn al te koop.
Wanneer komt de Ultra2-BR te koop te staan en waar kan ik hem als eerste bestellen. Ik zit er al een paar weken op te wachten.
Ik hoop dat jullie me spoedig mogelijk antwoord kunnen geven.
Met vriendelijke groet,
Ramon

Hi,
Sorry I don't understand.... :( What language is that?
Let me guess, are you asking for different versions of motherboard model for KT3 Ultra 2 ? Ultra2-BR comes with Bluetooth transceiver and key, while Ultra2-R doesn't have Bluetooth bundled and Ultra2 doesn't have RAID either....
:D :D :D I feel like shooting in the dark.... :D :D :D

MSI KT3 ULTRA2 - RAM question

Hi,
I just bought MSI KT3 ULTRA2 -Sound Motherboard
and for the RAM, I want to buy:
TOSHIBA 1.0GB ECC Registered DDR SDRAM DIMM (Toshiba model: THMD1GE0SB80 (PC1600) 128Mx72)
(for detail of the RAM, please read at: http://www.toshiba.com/taec/components/Datasheet/THMD1GE0SBxx-010702.pdf )
Do you guys know if that RAM is supported by MSI KT3 ULTRA2?
Thanks a lot

And beside, I'm building that computer with:
Mother Board : MSI KT3 Ultra2
Processor: AMD Athlon 1800+ XP
HDD : Western Union wb1000 100 gigs 7200
RAM: Toshiba 1 gigs pc 1600 ECC registered (still in doubt if I can use that)
Video Card: any suggestion? I'm thinking ATI radeon 9000 128 megs DDR, it's not that great, but I dont need a really good video card, I work most of the time
CASE: any suggestion?
Cooler: suggestion?
CD-R: 48x16x48 Asus
Thanks

Help...KT3-Ultra2 and Hard drive problems

Hello, I'm new to this board. I've been having an issue with hard drives lately. I have an MSI KT3-ultra2 with the latest BIOS version installed. I recently had a hard drive get completely erased and the actually size of it (10gig) had changed to 1 gig. Just prior to that I got a corrupted file error in a game I was playing. (The 10gig HD was a storage drive). My main drive (Maxtor 40gig) started to clunk and whine and then eventually the computer would lock up hard. I assumed the HD was going bad and was the cause of all the corruption. So I went and bought a new WD Hard drive 80 gig. Had it for about 2 weeks now and now all of a sudden I'm getting a similar clicking noise and a whine and then it locks up on me. I can only run my computer for about 10 to 20 minutes before it locks up. I have changed IDE cables to see if they were the cause and that didn't solve the problem. I've also disconnected all my CD drives and still nothing. I am going to take a guess and assume there is something wrong with my MB. IDE controler perhaps? Can anyone help me with this or confirm my thoughts on the situation? Any help is greatly appreciated. Thanks

May be your powersupply is faulty. Or the memory? try to get it checked

My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!

My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!
I've got an MSI KT3-ULTRA2 mainbord, and I have a NEOLEC VENEZIA TB Cooler. But when I attach my NEOLEC cooler and I start the machine, the machine shuts down within a couple of seconds, and I get nothing to see on my screen. The weird thing is when I turn the PC on, the cooler starts rotating so it can't be broke, but then the pc shuts down i a couple of secs. So pleezze anybody help me!!
The weird thing is that I also have a coolermaster cooler, and that one works fine. But the problem is that this coolermaster is designed for AMD XP 1900+, and I ahve an AMD XP 2200+ that's why I bought the Neolec Venezia TB cooler.
Grtzz
skeleton

one easy thing to watch for... see if the heatsink or fan is in contact with any part of the motherboard, like... if it is too big and touches something that normally wouldn't be in contact with a fan or heatsink. If so, it could be shorting it.

!! Help !! MSI KT3 Ultra2 (MS-6380E) No BIOS Prompt!!

Hi Guys, this may be really elementary to you folks, but I want to change the boot order in bios, so that my Acronis True Image boot disc will be recognized, but when I start my machine, there is NO message about pressing ANYTHING to enter into bios. I've tried delete and esc anyway, to no avail, and I'm about to restart and try F2, but the screens flash past pretty quick, but not too quickly to see that there is NO prompt to enter BIOS at all..... is that expected, problematic??
Can I download a driver or something that will make the "press [ ] to enter setup" or "press [ ] to enter BIOS" prompt appear?
Failing that, is there anyway to force the system into BIOS without a prompt??
My motherboard is MSI KT3 Ultra2 (MS-6380E) and the chipset is VIA VT8367 Apollo KT333, if that helps. I believe that should be all you need to help me out, but tell me if you need anything else, since I have Everest and can probably tell you anything. In fact, I'll just paste all the info on the motherboard right here:
Field   Value
Motherboard Properties
Motherboard Name   MSI KT3 Ultra2 (MS-6380E)
Motherboard ID   62-0911-009999-00101111-040201-VIA_K7$1AARK204_A6380VMS V5.6 091102
Front Side Bus Properties
Real Clock   100 MHz (DDR)
Effective Clock   200 MHz
Bus Width   64-bit
Bus Type   DEC Alpha EV6
Bandwidth   1600 MB/s
Memory Bus Properties
Real Clock   133 MHz (DDR)
Effective Clock   267 MHz
DRAM:FSB Ratio   4:3
Bus Width   64-bit
Bus Type   DDR SDRAM
Bandwidth   [ TRIAL VERSION ] MB/s
Chipset Bus Properties
Real Clock   67 MHz (QDR)
Effective Clock   267 MHz
Bus Width   8-bit
Bus Type   VIA V-Link
Bandwidth   267 MB/s
Motherboard Physical Info
RAM Slots   3 DIMM
Motherboard Size   230 mm x 300 mm
Motherboard Chipset   KT333
Integrated Devices   Audio
Form Factor   ATX
Extra Features   [ TRIAL VERSION ]
Expansion Slots   [ TRIAL VERSION ]
CPU Sockets/Slots   1
Motherboard Manufacturer
Product Information   http://www.msi.com/index.php?func=prodpage1&maincat_no=1
Driver Update   http://driveragent.com?ref=59
Company Name   Micro-Star Int'l Co.,Ltd.
BIOS Upgrades   http://www.esupport.com/biosagent/index.cfm?refererid=40
BIOS Download   http://www.msi.com/index.php?func=downloadindex
ANY HELP you can give me would be GREATLY appreciated folks......
Please help!!

Quote from: Henry on 26-July-09, 10:31:42
Are you using a PS/2 or USB keyboard? If USB try a PS/2 KB. Have you tried rapidly pressing 'Delete' right after power on? By that I mean don't immediately hold it down but press & release multiple times.
Good tip about the ps/2 keyboard, not that I've tried it yet, but I will tomorrow after I get my hands on one, and I'll let you know. Thanks for the tip..... but I wonder, shouldn't it at least TELL me that there exists an option to go into BIOS? Even if it doesn't there must be some way in I guess, so I'll try this tomorrow. Thanks again.....

KT6 Delta/KT3 Ultra2 and MegaRAID SCSI failure

Greetings,
Synopsis:
I have several MSI motherboards and a MegaRAID SCSI 320-2 RAID controller made by LSI Logic. In the older boards (K7D Master and K7T Turbo2), the controller works normally. In the newer boards (KT3 Ultra2 and KT6 Delta), the controller is unable to display its DOS based or "Web" based BIOS.
I have changed numerous settings in the BIOS of the newer boards but nothing seems to allow me to configure the RAID controller. I also found the following link (https://forum-en.msi.com/index.php?threadid=16821&sid=&hilight=SCSI+RAID) to be interesting. Unfortunately, the suggestions therein did not effect a positive change.
Details:
Working boards:
K7D Master Award BIOS W6501MS V1.1 030502 with 2 AMD Athlon MP 2000+ processors, 1 Gig DDR memory.
K7T Turbo2 Award BIOS W6330MS V3.3 121901 with 1 AMD Athlon 1200, 512 Meg of SDRAM.
Non-working boards:
KT3 Ultra2 AMI BIOS A6380VMS V5.5 071002 with 1 AMD Athlon XP 2100+, 1 Gig DDR 333 MHz memory. PS actual reading: +5=5.030, +12=12.228, -12=-12.071, -5=-5.026. Single 450Watt PS.
KT6 Delta AMI BIOS A6590VMS V5.5 021004 with 1 AMD Athlon XP 2600+, 1.5 Gig DDR 400 MHz memory. PS actual reading: +5=5.278, +12=12.045, -12=-12.400, -5=-5.277. Dual 450Watt PS.
The non-working boards work normally without the RAID controller. In fact, they seem to work normally with the RAID controller save that they do not allow the RAID controller to enter configuration mode. They report that - will be executed at the end of POST but they just go to a boot attempt off the floppy drive.
These same systems (the last two) also do not work with an AMI Enterprise 1400 RAID controller BIOS ver. 1.48 (latest version) or an LSI Logic made Mylex controller.
Any suggestions on configuration changes, etc. that would allow these RAID controllers to work in the aforementioned motherboards would be greatly appreciated. Further information available if needed.
-Motherboard type and model: See above.
-Bios type and revision: See above.
-CPU type and model: See above.
-Memory name, model and quantity: See above and seemingly irrelevant.
-Video card: AGP based, but all different.
-Power Supply: See above.
-Hard Drives: Seemingly irrelevant as none are hooked up.
-Operating system and service pack level: Seemingly irrelevant as no OS is installed.

I feel your pain buddy !!! it's the same thing for me. I just got a LSI-22320 and I going through the same troubles. I was really looking forward to having this nice card in my system, only to find out it would not even let the system boot. I took the card out and pluged it in my Mom's older than dirt computer and IT WORKS !!... This was a very disapointing experience to say the least....
Well, if you do here something good, please let me know...
P.S. Your SCSI-brother in pain :
Eli
[email protected]

How can I flash the bios of a MSI kt3 ultra2 without a floppy drive?

How can I flash the bios of a MSI kt3 ultra2 without a floppy drive?
I used the msi live update software to download the bios update programe...when I run it gives 2 options dos and windows
but the windows option is greyed out and the dos option requires a floppy drive (mine does not work)..what can I do?

I can tell you what you need to do but unfortunately - not how to do all of it.
You will need to make a bootable CD with the neccessary files on it .- Somewhere on the www you should be able to find the instructions. I have flashed from a CD with no problems on a K7S5A board . The CD image was available as a complete download and just needed burning to the CD so - apart from the obvious ( BIOS file , BIOS installer ,command.com,msdos .sys, io.sys)I don't know what else might be needed on the CD- unfortunately the disk I made is long gone.
I'm sure a search will find what you need to know.
Once you have the disk -just insert in CD Drive - restart and follow the instructions.
Dave

Msi kt3 ultra2-c. have someone got it?;]

i have search this forum but i dont found.....
does kt3ultra2-c support duron 1400,1600,1800??
and how look overclocking on this MB? can i safely change fsb to 166??

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=357&kind=1
But: Support for new Duron 1400, 1600, 1800 with 266MHz FSB
Quote from user DisappearPoint:
Quote
Kt3 Ultra2 + Duron 1400MHz + bios 5.7 works correctly.
And from user letoii:
Quote
these chips work fine, in anythign that supports a thoroughbred Go to the top of this page
these chips work just fine. they just are not detected as a proper duron 1600 or what ever. they will detect as an Athlon XP 1900+. Make sure to set the FSB to 133mhz.
These are boards that I have used the chips in:
K7T Turbo2
6378V3
Kt3Ultra
Kt3Ultra2
KT4Ultra
KT4AVL
745Ultra
and a bunch of others
i think that MSI just doesnt want to update the BIOS for all their old boards
sos that the CPUs are properly identified.
So looks like there is a godd chance that it will work (kt3 ultra2 and kt3 ultra2-c a nearly identical exept missing ram bank and missing raid controller - but they use the same chipset).
Quote
can i safely change fsb to 166?
I think so, see above.

KT3-Ultra2 and 2400+ CPU

I have a new system I built...
MSI KT3 Ultra2 (MS-6380E) Ver. 1.0 MB
AMD 2400+ CPU
Dr. Thermal Extreme SE CPU Cooler w/Artic Silver III
Antec TruePower 550W PS
512 Meg PC2700 DDR Crucial Ram (Certified to work with Board)
Seagate 10 gig HD
Cardtek GeForce 3 Ti-500
NetGear 100 meg NIC
Sound Blaster Audigy2 Platinum
System booted and loaded XP fine. The original bios was 5.5. The cpu comes up as 1800+ by default. According to MSI web site, to adjust for 2400+ cpu, you set the FSB to 133 and the multiplier to 15. If you do this, the system locks. If you change to FSB133 and keep default multiplier it locks after reboot (will not post). Is there a physical jumper on the board I need to adjust/set?
If I reset back to defaults the system runs perfectly fine...

Quote
Originally posted by wonkanoby
step in cooler base is at top by psu?
And no additional cpu's :(

Problems with KT3 Ultra2 and Barton 2500+

I have a very big problem.
I buy new Athlon XP2500+ ty my board.
KT3 Ultra2 support 166FBS, but AGP and PCI bus is overclock (83/42) and my system is very instabile. Now using 133FBS. Can I fix bus to 166/66/33???
My configuration:
Win98SE+WinXPSP1
MSI KT3 Ultra2 (bios version 5.7)
Athlon 2500+@1900+ (Barton 11*133, 1,65V)
+ Spire 5F271B1L3 FalconRock II™
256MB RAM DDR-400 Kingmax (CL2 at 333, 1.7V*)- sorry I mean 2.7V*
Daytona ATI Radeon 9000 64MB DDR
SB Live! Value
AMD 10/100 LAN adapter
40GB Seagate HDD
Lite-on combo
FDD teac
add: 4 april 2004 at 15:17
My PSU is Emko 300W ''JS-300 P4''parametres in:http://www.emko.cz/emko_cz/index.html
1900+ temps: CPU: Chipset:2500+ temps: CPU: Chipset:At 2500+
Stability configuration si withount SB Live! value and LAN.
result: Memtest86 - O.K.
3DMark2001SE build330 - O.K.
SiSoft Sandra 2003 - O.K.(burn-in: CPU and memory test 20time)

what sandra version did you use?
next to temps and psu, please tell us, what bios is installed. barton cpus require version 5.7
"(CL2 at 333, 1.7V)" did you mean 2.7V? cause 1.7V are llittle too low.
sj

MSI KT3 Ultra2-R + AMD Sempron 2200+ 1.5 GHz Socket A 333MHz

AMD Sempron 2200+ 1.5 GHz Socket A 333MHz in
MSI KT3 ULTRA2-R Hovedkort for Socket A KT333 ??? or in
MSI KT4AV-L Hovedkort Socket A Retail KT400A ???

Yes update to BIOS v5.7, BUT the board will recognize it as AthlonXP 1800+ 1.5 GHz. Unless MSI releases an updated BIOS
AMD Sempron™ Processor
Model Number Frequency L2 Cache
3100+ 1.8 Ghz 256KB (exclusive)
2800+ 2.0 Ghz 256KB (exclusive)
2600+ 1.833 Ghz 256KB (exclusive)
2500+ 1.750 Ghz 256KB (exclusive)
2400+ 1.667 Ghz 256KB (exclusive)
2300+ 1.583 Ghz 256KB (exclusive)
2200+ 1.5 Ghz 256KB (exclusive)

MSI KT3 Ultra2 and S-ATA

Similar Messages

Maybe you are looking for