MSI KT333 raid and athlon 700 (is it possible)?

i have bought and msi KT333 raid motherboard and i tried to put and athlon 700 in it but when it tries to boot up is says that the processor runs at 933 and after that it freezes i can not even go into the biios
what can it be

Hi!
You are probably trying to run it with an FSB of 133 MHz, 700 MHz Athlons are supposed to work with a 100 MHz FSB.
Hans

Similar Messages

MSI K9N2G-Neo and Athlon X2 7850 Black Edition - BIOS Options Problem

Hello, i have this MSI K9N2G-Neo + Athlon X2 7850 BE (REVEEN RCCT 0901SP + Tuniq TX2) + 4 x 2048MB OCZ Platinum 1066MHz, 700 watt real power supply, etc...
The problem is the bios v1.2 and new v1.3 that appears Disabled the CPU Voltage option for this cpu, in gray color or default values and i can´t change it. Now the cpu is running well at 3.2 ghz OC (200x16) some stable but not at all, i think it is a weak OC for a Black Edition CPU. Before i was using the X2 7750 BE and was the same problem with the CPU Voltages Bios´s options too.
Why in the bios isn´t enabled the CPU Voltage option ?
And why this Athlon Kuma don´t appear in the CPU SUPPORT LIST ??
This mother says that support CPUs up to 140watts and AM3... is it sure or it is a lie ?
This bios v1.3 is a few days new, Now i have to wait another 5 moths for a new one ??
Thanks a lot.

Quote from: Svet on 05-July-09, 04:59:39
https://forum-en.msi.com/index.php?topic=128250.0
Where you saw that?
Hi Svet... i did what u said me with numpad and nothing happended cause the cpu option is disabled. I think there is some kind of incompatibility between this mother and Kumas Core CPU... whit the 7750BE was the some issue too.
MSI official web page and 140Watts mothers support shows it.
Slds

MSI NEO2 - F and Athlon 3000 64 Venice

MSI send to me a new beta bios and now Dual ram working fine , but now i have another problem ..(beta bios 903)
CPU benchmarks are very low , my A643000 is slower then athlon xp 2800 :/ i tested it in sisoft sandra 2005 ..
Any idea for help me
ps.sorry for my english :/

Well I'm in work right now and dont remember all bios seting , but cool and queit maybe is enable a try in home that settings and disable this,
Cpu V was in 1.4 in core center,memmory have settings Ddr400 , cl2.5 , 3 7 3 and voltage is 2.65 (2 x 512 kingston 3200 ) but memmory benchmark results are very good ...(temp cpu is 37'C)
HT is 800mhz and voltage for this is auto.
and AGP Freguency ?? what is this ? j have setting " sync with cpu" on..
but some others is 66 and 77 ..

PowerNow with MSI 745 Ultra and Athlon XP2600-M

Hi, i have a MSI 745 Ultra board with a XP2600-M barton processor.
Has anybody got the powernow feature to work? I have tried and i just cannot do it. Also if i want top maually set the cpu core voltage in the bios it will not go to 1.45v!
I have the latest bios, drivers and xp pro with SP2
Cheers

Hi, thanks for the quick responses
The CPU (although a barton core) is a native native FSB 266. AXMG2600FQQ4C
i got the processor because it runs at 45W - and i wanted a low current system for bittorrent and usenet downloads. the cpu is in the epox board at the mo as it allows a 1.45v core in the bios.
i got the MSI board off ebay for a staggering 99p (bargain as its a really good board), and the processor works fine on it. I cannot remember exacety how low i can set the cpu core voltage in the bios as the cpu is back in the epox board but im sure it bottomed out at 1.5v
The latest bios i installed in the MSI board said it supported the 2600+ but the powernow just did not work.
i may get an old mobile processor like an 1800+ and see if it works with that
Cheers

MSI 785GM-E51 and Athlon II x4

I recently bought a new motherboard and processor for my computer along with 2gb of memory but seem to be having some problems. I have the motherboard connected to my HDTV by the HDMI plug but whenever I turn my tv off and then on again the pc loses its signal and the only way to get the picture back is to press sleep and wake it up or restart it. It also loses its signal whenever I play a game and quit the game. At first I thought it might be a problem with the power supply because the one I was using was only 300w when the recommended said 350w so I bought a 500w power supply but things are still the same. Another thing is that I was hoping to play Mafia 2 on it but when I run the demo it lags a lot even when on low graphics which doesn't make sense since I have whats recommended. Appreciate any help.

With a new motherboard follows a fresh installation of Windows. It is almost a must to get a stable system. But if everything else works except for the gaming, you likely installed Windows on an empty hard disk, and it is as Bas says.
Please list the max amps the new PSU can do. Whenever I read "Cool" my alarm rings.
- Eh, can your system really make it through Mafia 2 with only onboard graphics:
"Video Memory: 512 Mb
Video Card: nVidia GeForce 8600 / ATI Radeon HD 2600"
http://www.vgrequirements.info/mafia-2-pc/

MSI KM4M-V and Athlon XP2800

When I boot this I just get a beep, every 3-4 seconds ish
Tried it with everything out of the case, no memory, memory.any ideas ?different sticks of memory. (PC2100 DDR266)
anyt ideas ?
Could it be the power supply ?

Quote
Originally posted by internetuser
the MB is all in one, so nothing else on it bar memory, and the XP2800
P4 pin and 20 pin atx is already connected.
power supply is
+3.3v 17a
+5v 12a
+12V 13a
-5v 0.3a
-12v 0.3a
+5vsb 2a
+5v and 3.3 combined is 70W +5V & 3.3v + 12V combined is 170W total output 200w
That is a really poor PSU. I doubt it will last very long in that system. The risk in using a weak PSU like that comes from what it can damage from failing after being overloaded. When a PSU goes out from being overloaded, it can damage anything, or everything connected to it.

MSI KT333 Ultra2-R and G550 whackyness

ok so there has been about 36 hours of technical nightmares which comes down to this: i have likely stumbled onto a bizarre incompatibility. i installed XP Professional Corporate with SP1 a total of 6 times up until 3 something in the morning (on the upside my system does such in 5 minutes after formating) due to what appears to be a driver issue not a hardware failure. after installing the motherboard chipset (VIA KT333) drivers and then the video card (Matrox G550) drivers sometime thereafter at random points the screen would go black and XP would report a hardware failure and my video display would go to what appeared to be lesser than 640x480 @ 8 colors yet after rebooting things would be peachy keen. i even tried one step back on the VIA drivers and G550's with no fix. the 7th OS install was WIN2K Pro and with the same drivers at the start of this (the current from both parties) there's been no issue (benchmarks were ran for 9 hours straight using PCMark, 3DMark and Sandra). yep it's pretty clear that friday is going to involved calls to Matrox, MSI, and if possible VIA..
Enermax 431W Dual Fan Noise Control
MSI KT333 Ultra2-R
AMD Thunderbird 1400 AYHJA w/ Swiftech MCX462 + Delta 80CFM
Corsair CMX512-3200 512MB DDR
Matrox G550 32MB
Netgear Nic
SB PCI128
2xQuantum 30GB @ RAID 0
Toshiba 16xDVD
Lite-On 48x CDRW
Sony 1.44

interesting as i've had Matrox cards dating back to the original Millennium I&II through to the Millennium/Mystique G200, G400, G450, and G550 with VIA chipsets dating back to the MVP3 and have never seen anything like this. currently the G550 is my card of choice and fact is that the newest set of the VIA drivers have been used on multiple 133/A boards without issue and this is the first 333 in the arsenal of systems i have...

MSI KT333 and memmory Questions

hi,
I recently have MSI Kt333 (6380e ver.1) w/ a 256mb DDR ram PC2100 (266)
and I'm planning to upgrade to a 512 mb PC2600 (333) can i still use my old memmory with the new 512mb? is this possible? tnx

Hi,
Yes, but sometimes it gives problems, mixing ram doesn't allway's work....
You have to try and find out....

MSI KT4 ultra and AMD ATHLON 2600+ and Corsair 512Mb 3200

Hello,
i've bought a: MSI KT4 ULTRA and a AMD ATHLON 2600+
Today, i've updated the bios to the version 1.3! So: no problem to reboot after the process complete.
BUT, now i can't set the CPU at 2.16Ghz (280Mhz clock) because if i set the clock up to 100Mhz it doesn't reboot anymore! the motherboard detect the frequency @ 1250 Mhz :(((
Please: HELP ME
(sorry for the grammar and / the english) but i'm a french guy.

Hi,
I had the same issues, see the thread:
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=11717&boardid=13&styleid=1
Essentially I had to set (in the BIOS) the FSB to 166 and left the Multiplier on auto. This ment the processor was reported properly as 2600+, but the memory will only run at 333 MHz... Yeah I think I wasted the money on getting the latest and greatest memory too....
Had me worried for a while, I though my supplier had palmed a bad chip off on me.... It just that the board can't do the highest speed chips and the highest speed memory at the same time (it states that that is unsupported in the manual...)
hope the helps...

MSI KT333 Ultra2-R & XP1800+ (Can't get to 1.5ghz) Help!

I'm hoping someone can help.
I have the:
MSI KT333 Ultra2-R Mainboard
Athlon XP1800+ Processor
128 MB DDR ECC 2100 Ram
3DFX Voodoo5 5500 65MB SGRAM AGP Video Card
Onboard USB 2.0
Onboard AC97' Sound
2 Maxtor 17 Gigs
1 WD 30 Gig
Lite On 40x12x48x CDRW
Zip 100 Internal
Enlight 250w Case
My problem which is EXTREMELY annoying is the fact that I can't get my CPU to clock at it's rated 1.5 ghz.
It clocks at a measly 1100 mhz.
I have tried:
Leaving the FSB at 100 (default) and increasing the Multiplier.
Increasing FSB to 133 and leaving multiplier to Auto, and all combinations to get 1500 mhz between the FSB and Multiplier settings- I've also tried 1200 mhz slowly upwards - even that doesn't work!!
I've also tried increasing core voltage...to no avail.
What happens?
In most cases the PC will start and upon going to WinXP either freeze or reboot. In many cases the PC will also hang on or before boot or turn off almost instantaneously. I doubt very highly that it's overheating because my max temp right now is 32c. I have the CoolerMaster HC001 Heatpipe Heatsink with Arctic Silver paste PERFECTLY spread.
What do I do? I don't know if it's the CPU or me. It's so bad I've even oced a duron I have to more mhz than I can do with the XP.
For clarification - I'm not even trying to OC the XP, I'm trying to get it to it's rated clock of 1.53 ghz.
I'm really hoping someone can help.
My clock speed right now is 1153 mhz, that is 11.5x100.
Do you think it could be because of the 250w PS?
I'll be replacing it soon with a 320w - for now I'm stuck with it.
Help?
Thanks in Advance.
If you have an XP1800 could you also post me your EXACT settings to the T?
Thank You Again....

;( I have got the same problem I have got a kt3 ultra2
ms-6380e athlon 2000+xp and a 550w power supply...
I can only get 1.250 ghz out of mine it should get about 1.667 its not the cooling because i have a monster of cooler on the chip with two extra fans blowing in the case and a heat exhaust blowing hot air out the back with the side off the temp of cpu is about 32 'c... I run mine with a 100mhz fsb 12.5 ratio if I change to 133 fsb it locks up and i have to clear c-mos....its got to be a bios problem that has yet to be sorted because there seems to be a lot of people with the same problem..... ?
?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?(

Msi ti4200-8x and games bundle

Hi,
just bought a msi ti4200-vtd8x, and started to play with the bundled software.
Some of the bundled games do not run at all !
these worst are : sum of all fears demo
and ghost recon.
These install but crash during the game start, just a short moment a black screen, and the back to the desktop.
my testing sofar :
Not running in my msi 845e max2blr + ti4200-vtd8x with win98se
Not running in my msi 845e max2blr + ti4200-vtd8x with win2k
Not running in my ecs k7s5a + ti4200-vtd8x with win98se
They run in my asus k7v133 + matrox marvel G400 with win98se, although a bit slow...
So, do I have a defective videocard, or is the gamesbundle not tested by MSI ?
George

Richard,
the rest of the hardware is not very interresting,
My P4 system :
floppy drive.
p4 2.4Ghz 533 fsb + 2 * 512 Mb ddr
MSI 845e max2 blr (lan,sound,raid etc all used)
2 80G maxtor in raid0
1 80G maxtor for the OS (win98SE or win2k sp2)
liteon DVD
liteon cdrw temporarily removed (something wrong with it)
and 1 PCI card : realtek 8029(AS) because I needed to connect to a BNC network.
And of course the MSI ti4200-vtd8x
All bundled in a AOPEN H600A housing with 300W supply.
After inserting the ti4200, I had a stable system, until I
closed my computer case. So I have added some extra fans.
This system refused to run some of the bundled games (SOAF and Ghos recon) using win98se or win2k.
all drivers from the MSI installation CD's
So I tried another system :
amd athlon tb 800Mhz + 256Mb sdram
floppy drive
ECS k7s5a (lan, sound)
20 G maxtor with win98se
AOPEN DVD
another AOPEN housing with 250W power supply.
and I put the TI4200 in this system.
same games refused to run.
So I tried on a third system, to check if the fault is in the games :
amd athlon xp 1800 @ 1.6Ghz + 1G sdram
asus a7v133 + raid
terratec 1024 sound
realtec 8139 lan
1 40gb maxtor
1 80gb maxtor
2 40gb maxtor in raid0
asus dvd
liteon cdrw
matrox marvel G400TV 16Mb agp videocard.
300W or 350W powersupply.
and those MSI bundled games run !
so this leaves 2 possibilities :
- msi ti4200-vtd8x is defective
- bundled games do not work with this newer agp 8x card type.
George

MSI K8N SLI and Athon 64 X2 4200+: some problems

Hi from France
I've try to upgrade my computer all day long, and still have no solution about this..
Mainboard: MSI K8N-SLI
Processor: Athlon 64x2 4200+
RAM: CORSAIR 1Go *2 PC 3200
Graphic card: MSI X1950 Pro 256 Mo Radeon
2 HD (WD 250 Go and WD 160 Go) on IDE 133 (supplied by the mainboard)
OK, I've connected everything, everythings seems to be well started, the CPU is recognized as ATHLON 64 X2 4200+, and I try to go into BIOS by pressing "DEL", as it is written on my screen (just beside "F11 to boot sequence)
Nothing happened, it seems that it freezes...
When I start the computer, I hear my HD starting, the graphic card also, everything...
But what's going on ??
I'm a little bit disappointed, it's not the first time I do this kind of upgrade...
I've rebuilt my computer with "old" configuration MSI K7N L Athlon XP 3000+ and MSI 6600 Geforce
Every thing is ok
I don't understand, can somebody helps me
SOrry for my bad technical english...

Quote from: eagle78 on 01-January-07, 07:58:35
First of all
HAPPY NEW YEAR (in France, it's done)
And for my computer, all is allright now
Like a silly boy, I've connected too much things in the beginning (USB Hub I've forgot not to plug)..
And so without that, computer boots well, CPU is seeing good, RAM is OK and all the drives..
Some problems with my OS (XP and SP2), but as somebody says above, I needed to "repair" it, and all is good now
Thanks for your answer...
Best regards...
happy new year nice everything goes well

On-board RAID and PCI RAID controller

Hello everybody,
I am new to the forum. So, please excuse me if that topic was already covered...
I have MSI MAX2-LR (MS-6398E) board. It works just fine, no problem so far. Though I have 2 problems with add-on cards:
1. I was planning to use on-board RAID and additional PCI RAID controller = FastTrack 100 TX2 to cover 6 hard drives into 2 mirrored sets: 4drives one and 2 drives the other.
It doesn't work! I can use either on-board RAID or PCI RAID. As soon as I have any drive connected to on-board RAID, the PCI RAID disappeares. If I have no drives connected to on-board RAID, I can see both RAID controllers, they have different I/O and IRQs, and PCI RAID is working just fine. If only I connect one drive to the on-board RAID, it gets activated on startup, and the other one disappeares. :O
I believe it's a BIOS bug. I wander, if that can be fixed easily????? :D
2. I have a new Matrox Video card = Parhelia. It doesn't work in AGP slot! System doesn't recognize it, and beeps non-stop. I am dealing with Matrox Tech Support on that matter. ?(
Maybe, it's a known issue, and somebody can save me time by telling what's that about.
Appreciate any imput. Have a great weekend.!!! :]

Hey I also have the same Raid card and also the Matrox Parhelia, and I see that you also have some problems with the card I got also problems with the card, but they couldnt help me at theire forums (http://forum.matrox.com/mgaforum/Forum10/HTML/005085.html), I hope we have got more luck here :D

KT4 Ultra Raid and W2K3 Server

Hi, I am planning to install Windows 2003 Server on my machine. But before I go ahead and wipe everything from the hard drive I need to be sure there are proper drivers for my RAID controller in W2K3 Server. I doubt I can use the XP drivers? Currently I am running WinXP with the TX4000 drivers by Promise and that works fine! Anyone any experience with this mobo, raid and win2k3 server?

yea well of course I can recert to XP and do have a GHOST image :D. OK just dl-led and burnt the evaluation version from MS, will let u know if it installed correctly (either Promise's driver disk or MSI for XP).

Option RAID and ICH model [SOLVED]

Hello, I ‘d like to know a version of the option RAID and ICH model.
I bought G45M-FIDR (G45M must be original board) first MSI board because PS2 mouse and keyboard IO are convenient for my KVM.
To build the RAID1 system, I set RAID mode of the system BIOS to RAID.
After reboot, press CTRL+I then "Intel Matrix Storage manager option ROM v7.5.0.1017 ICH9R wRAID5" appeared on the screen.
The chipset of the board must be ICH10R???
In Appendix Intel ICH10R SATA RAID of MSI manual G45 series MS-7521 (V1.X) Main board, I could read "Intel Matrix Storage manager option ROM v8.5.0.1013 ICH10R wRAID5" on the sample screen.
Both 7521v11 and 7521v14 BIOS down loaded from MSI global site and installed, but ICH9R appeared.
Please advise of a modification or some information.

Hello Sunaken,
the ICH9R and ICH10R controllers are very similar. As it looks, only the firmware version is a little out of date (that is why it shows ICH9R instead of ICH10R). However, this does not mean that you actually have an ICH9R Chipset on a board that is supposed to have an ICH10R Southbridge. In terms of functionality, this should not really matter,
Quote
Both 7521v11 and 7521v14 BIOS down loaded from MSI global site and installed, but ICH9R appeared.
There is a BIOS Update available that includes an Update of the firmware version. The release is called A7521IMS.151 [v1.5b1] and was released on 04/17/2009. This is the changelog:
- Update RAID ROM to Version 8.8.0.1009.
As this is actually a BETA Release (based on the A7521IMS.140), it is not available for public download. You can contact MSI Technical Support here:
http://ocss.msi.com.tw/
...and ask for a copy. If they don't reply fast enough or misunderstand your request, please write me a Personal Message and I will send you the BIOS File.
/Edit:
Nevermind. I uploaded the A7521IMS.151-Release here:
https://forum-en.msi.com/index.php?topic=127845.msg962372#msg962372

MSI KT333 raid and athlon 700 (is it possible)?

Similar Messages

Maybe you are looking for