MSI KT333 Ultra2-R & XP1800+ (Can't get to 1.5ghz) Help!

I'm hoping someone can help.
I have the:
MSI KT333 Ultra2-R Mainboard
Athlon XP1800+ Processor
128 MB DDR ECC 2100 Ram
3DFX Voodoo5 5500 65MB SGRAM AGP Video Card
Onboard USB 2.0
Onboard AC97' Sound
2 Maxtor 17 Gigs
1 WD 30 Gig
Lite On 40x12x48x CDRW
Zip 100 Internal
Enlight 250w Case
My problem which is EXTREMELY annoying is the fact that I can't get my CPU to clock at it's rated 1.5 ghz.
It clocks at a measly 1100 mhz.
I have tried:
Leaving the FSB at 100 (default) and increasing the Multiplier.
Increasing FSB to 133 and leaving multiplier to Auto, and all combinations to get 1500 mhz between the FSB and Multiplier settings- I've also tried 1200 mhz slowly upwards - even that doesn't work!!
I've also tried increasing core voltage...to no avail.
What happens?
In most cases the PC will start and upon going to WinXP either freeze or reboot. In many cases the PC will also hang on or before boot or turn off almost instantaneously. I doubt very highly that it's overheating because my max temp right now is 32c. I have the CoolerMaster HC001 Heatpipe Heatsink with Arctic Silver paste PERFECTLY spread.
What do I do? I don't know if it's the CPU or me. It's so bad I've even oced a duron I have to more mhz than I can do with the XP.
For clarification - I'm not even trying to OC the XP, I'm trying to get it to it's rated clock of 1.53 ghz.
I'm really hoping someone can help.
My clock speed right now is 1153 mhz, that is 11.5x100.
Do you think it could be because of the 250w PS?
I'll be replacing it soon with a 320w - for now I'm stuck with it.
Help?
Thanks in Advance.
If you have an XP1800 could you also post me your EXACT settings to the T?
Thank You Again....

;( I have got the same problem I have got a kt3 ultra2
ms-6380e athlon 2000+xp and a 550w power supply...
I can only get 1.250 ghz out of mine it should get about 1.667 its not the cooling because i have a monster of cooler on the chip with two extra fans blowing in the case and a heat exhaust blowing hot air out the back with the side off the temp of cpu is about 32 'c... I run mine with a 100mhz fsb 12.5 ratio if I change to 133 fsb it locks up and i have to clear c-mos....its got to be a bios problem that has yet to be sorted because there seems to be a lot of people with the same problem..... ?
?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?( ?(

Similar Messages

MSI KT333 Ultra2-R and G550 whackyness

ok so there has been about 36 hours of technical nightmares which comes down to this: i have likely stumbled onto a bizarre incompatibility. i installed XP Professional Corporate with SP1 a total of 6 times up until 3 something in the morning (on the upside my system does such in 5 minutes after formating) due to what appears to be a driver issue not a hardware failure. after installing the motherboard chipset (VIA KT333) drivers and then the video card (Matrox G550) drivers sometime thereafter at random points the screen would go black and XP would report a hardware failure and my video display would go to what appeared to be lesser than 640x480 @ 8 colors yet after rebooting things would be peachy keen. i even tried one step back on the VIA drivers and G550's with no fix. the 7th OS install was WIN2K Pro and with the same drivers at the start of this (the current from both parties) there's been no issue (benchmarks were ran for 9 hours straight using PCMark, 3DMark and Sandra). yep it's pretty clear that friday is going to involved calls to Matrox, MSI, and if possible VIA..
Enermax 431W Dual Fan Noise Control
MSI KT333 Ultra2-R
AMD Thunderbird 1400 AYHJA w/ Swiftech MCX462 + Delta 80CFM
Corsair CMX512-3200 512MB DDR
Matrox G550 32MB
Netgear Nic
SB PCI128
2xQuantum 30GB @ RAID 0
Toshiba 16xDVD
Lite-On 48x CDRW
Sony 1.44

interesting as i've had Matrox cards dating back to the original Millennium I&II through to the Millennium/Mystique G200, G400, G450, and G550 with VIA chipsets dating back to the MVP3 and have never seen anything like this. currently the G550 is my card of choice and fact is that the newest set of the VIA drivers have been used on multiple 133/A boards without issue and this is the first 333 in the arsenal of systems i have...

I am getting a weird alert I can't get rid of. Help! I have amber and gov alerts turned off. All other alerts turned off I think it may be a sever weather alert but can't find it!

I am getting a weird alert I can't get rid of. Help! I have amber and gov alerts turned off. All other alerts turned off I think it may be a sever weather alert but can't find it!

That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

Can't get rid of the help screen

CC2014. I can't get rid of the help screen because the links at bottom are gibberish. See screen shot. What font am I missing?

Man, logging into Adobe is a major hassle. Anyway, I reloaded Tahoma and Lucida. But I don't see any delete or do not display.

HT4623 after the new softtware 6.1 on my iphone i losed my picture , how can i get back ? please help me

after the new softtware 6.1 on my iphone i losed my picture , how can i get back ? please help me

Try deleing the download and try again. It is located:
IPSW file location for Mac and Windows
If yo restore, the iPod will also be update. You can try that. Just make sure that you backup first so yo can restore from backup
iOS: How to back up

Restore wrong backup on my iphone and it locked with icloud account and i can't get the password, any help?

restore wrong backup on my iphone and it locked with icloud account and i can't get the password, any help?

Hello Hoppayoppa
You would need to have the owner of that iCloud account to turn off. It can be done without them there. Check out the article below for more information. After that is done, you can put the correct backup on your iPhone.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
Regards,
-Norm G.

Pressing F1: Diese Webseite ist nicht verfügbar (ERR_NAME_NOT_RESOLVED). How/Where can i get the LR-Online-Help?

Der Server unter community.stage.corp.adobe.com kann nicht gefunden werden, weil die DNS-Suche fehlgeschlagen ist. DNS ist der Netzwerkdienst, der den Namen einer Website in die zugehörige Internetadresse übersetzt. Der häufigste Grund für diesen Fehler ist eine fehlende Internetverbindung oder ein falsch konfiguriertes Netzwerk. Eine weitere mögliche Ursache ist ein nicht reagierender DNS-Server oder eine Firewall, die den Netzwerkzugriff durch Google Chrome verhindert.
Internetaccess is OK. Firewall is Off.
Thank you,
Manfred

Thank you very much!!
Best Regards,
Manfred
2015-04-30 9:51 GMT+02:00 99jon <[email protected]>:
Pressing F1: Diese Webseite ist nicht verfügbar
(ERR_NAME_NOT_RESOLVED). How/Where can i get the LR-Online-Help? created
by 99jon <https://forums.adobe.com/people/99jon> in Photoshop Lightroom
- View the full discussion
<https://forums.adobe.com/message/7497497#7497497>

When my itunes was updating our kid cacelled it and now i have no tiunes at all how can i get my itunes back HELP PLEASE ?

Hi when i was updating my itunes on my laptop our kid cacelled it and now i have no itunes any where .how can i get my itunes back HELP PLEASE ?

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I have problem in web page when i go to open home page but there given some massage that massage is upgread modern browser how can i get modern? pls help me.

when i go to open youtube at that time my computer says upgread the modern browser .i am using windows xp how can i get moder browser?
== URL of affected sites ==
http://youtube
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2; AskTB5.6)

You can get Firefox 3.6.3 from here:
http://www.mozilla.com/en-US/firefox/
or
http://www.mozilla.com/en-US/firefox/all.html

Can't get my site online - Help! please?

I initially built my site with Yahoo Sitebuilder but I hate
it so I decided I would finally learn how to use Dreamweaver. I'm
figuring it out as I go and now I'm finally done and ready to go
live...just one big problem...I can't get it online! When I go to
manage my site and test it it says it connect successfully blah
blah blah. Then when I go to 'put' my files it says it was "unable
to complete 5 files or folders" and doesn't tell me which ones they
are. So my issue may be with my folders but I don't know.
Also, I can't preview my pages using F12 in Dreamweaver (it
says "Page Load Error") but if I go to the actual html file in my
folder it opens fine in a browser and my links work also to see
other pages.
Anyone?

> would finally learn how to use Dreamweaver
You would be MUCH better off if you put this quest on hold
and spent your
time and effort learning HTML and CSS. If you know the
underlying
technology, the tool that you are using will be a walk in the
park. Besides
DW will require you to have this knowledge or it will beat
you severely
about the head and shoulders with a mop handle.
> and doesn't tell me which ones they are
Yeah - it does. Look in the FTP log.
Or look on the remote site.
> Also, I can't preview my pages using F12 in Dreamweaver
(it says "Page
> Load
> Error") but if I go to the actual html file in my folder
it opens fine in
> a
> browser and my links work also to see other pages.
What have you defined in PREFERENCES for your preview
browsers? Do you have
a TESTING server defined? Do you *NEED* a testing server (it
sounds like
you do not). In this case, just set Server Model to NONE in
the definition
pane for testing server.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"emjay1981" <[email protected]> wrote in
message
news:[email protected]...
>
>
> I initially built my site with Yahoo Sitebuilder but I
hate it so I
> decided I
> would finally learn how to use Dreamweaver. I'm figuring
it out as I go
> and now
> I'm finally done and ready to go live...just one big
problem...I can't get
> it
> online! When I go to manage my site and test it it says
it connect
> successfully
> blah blah blah. Then when I go to 'put' my files it says
it was "unable to
> complete 5 files or folders" and doesn't tell me which
ones they are. So
> my
> issue may be with my folders but I don't know.
>
> Also, I can't preview my pages using F12 in Dreamweaver
(it says "Page
> Load
> Error") but if I go to the actual html file in my folder
it opens fine in
> a
> browser and my links work also to see other pages.
>
>
> Anyone?
>
>
>

Crazy gap I can't get rid of! help - please??

Hi - my first time on here (well, needing to be on here..!).
I'm having a heck of a time. I've just been hand-coding a fairly
simple site - which I've now finally gotten around to updating.
The site is:
http://www.arcfoto.com
I'm trying to set it up as a fixed (un-resizeable) console
window with a flexible content pane. So - I've been using
dreamweaver to set it all up. But the problem is that I've got this
really persistent gap that I can't get rid of. It's spans the left
and top sides. (about 10px of white) - in the version you see if
you visit the URL - I've had to add gap to the bottom and right -
just to not make it look TOO WEIRD. But I'd really really like to
get rid of it.
The basic architecture is the following: Javascript window
containing tables to organize content. Nothing special - just
rollovers. A friend suggested I could add CSS commands to get rid
of it. I've been doing a fair bit of messing around with any and
all CSS parameters I could.... but nothing seems to really make a
difference. I'm thinking it's got something to do with the
javascript window definition for the window on the entry page
(previous page). But I really have no idea. I'm HOPING, PRAYING -
that someone here might have a suggestion for a quick fix - or a
fix of any kind...! I've been struggling with this for WEEKS
now...!
Thanks.

Martin?
Your PNG files are so huge because you have not properly
exported them from
FW. Just export as JPG images - they'll be fine if you don't
OVER optimize
them, and they'll be MUCH smaller than these are now.
This is a bit hinky -
.style1 {
font-family: Arial, Helvetica, sans-serif;
font-weight: bold;
color: #D1CED0;
border-top: 0;
border-left: 0;
border: 0;
body {
background-color: #666666;
border-left: 0;
border: 0;
border-top: 0;
border-top-style: outset;
margin-left: 0px;
margin-top: 0px;
try this -
.style1 {
font-family: Arial, Helvetica, sans-serif;
font-weight: bold;
color: #D1CED0;
border-width:0;
body {
background-color: #666666;
border-width: 0;
margin-left: 0;
margin-top: 0;
But the big question is: will it work for me?
It could.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"arcfoto2" <[email protected]> wrote in
message
news:[email protected]...
> Thanks Martin...! That was certainly very gentlemanly of
you. I'm not sure
> how
> my response to the previous got in ahead of yours. No
doubt you started
> the
> reply before I did mine or something.
>
> I felt I really wanted to try going with PNG because in
last years I'd
> been
> having lots of problems with JPGs - artifacts, sure...
but also color
> drift and
> averaging - causing noticeable differences between text
block backgrounds
> and
> the bg itself, etc... but I figured my site was very
minimal, very
> sparse... so
> PNGs were no HUGE sin, considering many people seem to
have loads of SWFs
> all
> over theirs... but that's here nor there...
>
> Thanks.
>
> This is the CSS code I ended up with:
>
> .style1 {
> font-family: Arial, Helvetica, sans-serif;
> font-weight: bold;
> color: #D1CED0;
> border-top: 0;
> border-left: 0;
> border: 0;
> }
> body {
> background-color: #666666;
> border-left: 0;
> border: 0;
> border-top: 0;
> border-top-style: outset;
> margin-left: 0px;
> margin-top: 0px;
> }
>
> Suppose I did it twice, huh? I'm assuming the 'body' one
can come out.
>
>
> ALSO - I'm sure I should really post a separate topic
for this - but maybe
> it'll help cut down on the overall number of topics if I
post it here... :
>
> Not sure if you noticed my redundant links. I have a set
of nav links for
> rollover (since I'm REALLY finicky about typography -
has to be myriad)
> and
> another set of TEXT links which are being pushed out of
the frame (not
> supposed
> to be visible).
>
> The reason I'm doing this is for bot-cataloging - since
it's my
> understanding
> that google, et. al. does not penetrate image links.
Only text - from what
> I
> understand. So - yes, well... it's an SEO trick. I'll
ask you to suspend
> moral
> judgement. But the big question is: will it work for me?
>
> thanks again,
> Jonathan
>

New ipad3, just getting started, trying to get on facetime but when I try to set up a message appears saying my email address is already in use. I am now stuck and I can't get any further! Help please!

New ipad3,just getting started,trying to get on FaceTime but when I try to set up a message appears saying my email address is already in use. I can not get any further, help please

Millietrixie-
Are you trying to call yourself to test FaceTime? If so, you must have a second E-Mail address registered with your Apple ID. In other words, there must be a different E-Mail address on each unit.
Fred

HELP !!!Everything deleted itself off my 80gb ipod,CAN I GET IT BACK? HELP!

I am hoping someone can help me,i am very stressed!!!I have an 80gb ipod i bought 15 months ago.No problems.
I bought a new ipod touch 2 weeks ago as well.uploaded stuff fine.Went to update all my podcasts on my old one last week,everything has gone!! all 300 movies and 6000 songs as well as all my podcasts!! We have 4 ipods in the household all on the same computer all using manual sync.My old one is still set to manual sync,so not sure why everything has gone!
I dont have anything backed up : (
Now,one question is that when i look in my summary when i plug it into itunes,i have 65gb showing up in the orange column as "other" and my ipod is showing up as full! I was able to put back a little bit of video,podcasts and music,but what is this "other"????? Is this my stuff somehow hidden???
Can i get my old stuff back again?
I am stressing out big time as i have spent a fortune borrowing stuff from the video store to burn to ipod to watch when i travel!!
Can anyone help,i will love you forever!!!!

You'd better have absolutely all of your media in iTunes, or it'll be gone forever...
Restore your iPod (pretty big, obvious button) and resync all your stuff. Only way I know.

Deleted Adobe Reader on touchpad, how can i get it back? help!!

I deleted the Adobe reader app from my hp touchpad, i cant seem to find a way to download it
how can i get it back???
thank you!
Post relates to: HP TouchPad (WiFi)
This question was solved.
View Solution.

How to Doctor an HP TouchPad (reflash the ROM)
On your Touchpad be sure to have:
USB cable.
The battery is charged to at least 30%.
Computer:
Windows 7, Windows XP, Windows Vista
Available USB port (not a hub or secondary port).
Java 1.5 or later is installed. If you are not sure about what version of Java you have, or even if Java is installed, go to www.java.com and click the Do I have Java? link to install the latest version of Java.
210MB of storage space.
Internet connection.
Miscellaneous Info:
The update process will take approximately 15 minutes.
During this process, your device will not be available for use.
Downloading webOS Doctor
Download webOS Doctor on your desktop computer. If you have a webOS profile, get it from http://ws.hpwebos.com/webosdoctor/sorry.htm
If not, check the webOS Internals page: http://www.webos-internals.org/wiki/Webos_Doctor_Versions
Get your TouchPad ready to update
Hold the Power Button for several seconds until a menu appears.
Tap Shut Down to completely power down your device.
Running webOS Doctor
Double-click the file that was downloaded to run webOS Doctor.
Follow the on screen directions up until you are asked to connect your device.
Select the language you selected on your device, and click Next.
Confirm your language choice.
Click Accept to accept the terms of use.
Click Next. webOS Doctor checks your system. BE PATIENT! I've seen this take a few minutes.
After webOS Doctor finishes checking your system, you will be asked to connect your device.
Connecting your device and finishing the webOS Doctor update
Connect your device to your computer using the USB cable. You must connect your device directly to your computer, not through a USB hub or other intermediate device.
Now the tricky part. Hold the Volume Up button on the device and insert the USB cable. After the large USB symbol appears on screen, let go of the Volume Up button. If you see the HP logo instead of the large USB symbol, you may have let go of the Volume Up button prematurely. If this occurred , wait until your device boots up, shut down your device and then repeat step 2.
Windows will find your device and may offer to install two different drivers.
When asked to install drivers of OMAP, select No, not at this time.
When asked to install drivers for Palm Novacom (bootie), select Yes and let the drivers install. This may take a while. Once the drivers have been installed, the Next button will become available in webOS Doctor.
Click Next.
Do not disconnect your device from the computer during the update process.
When the Reset Complete screen appears, click Done.
Wait a few minutes for your device to reset.
You're done!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

A request to download a free app appeared and I can't get rid of it. help

A free app appeared in the app store, and I can't get rid of it. Help if you can please.

Force close apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen
http://support.apple.com/kb/ht5137

MSI KT333 Ultra2-R & XP1800+ (Can't get to 1.5ghz) Help!

Similar Messages

Maybe you are looking for