MSI KT3V and Radeon 9100

I have this mobo + graphic card, Athlon XP1700, and i have some sort of compatibility problem. When i install Windows 98se, DirectX 9 and any catalyst newer than 3.2 i've got ddhelp error communicate (always when i close simply tetris 4000 game). I check psu, ram, cpu cooling and card in other computer. In my older computer on mobo Aopen AK72(Via KX133) and Athlon 550 with this same via 4in1 drivers and directx i can use any catalyst without a problem. I change hdd too. Only things not tested are mobo and cpu, but i don't have any other. Does abybody knows what is goin on and how i can solve this problem?

I think no. Only two, usb update and update for hard disk drive with 2MB cache. Do You think that's Windows 98SE problem?

Similar Messages

  • MSI KT3V and T-bred 2000+

    Hi everyone!!
    I have bought a MSI KT3V and amd t-bred 2000+....
    My problem is that the BIOS shows CPUtemp: 56celcius and in MB5 it shows 50celcius...
    And I am wondering doesn't a AMD Thourghbred 2000+ go in 1.60v?? My sets a default in 1.65v and I can't get down to 1.60v.... WHAT IS WRONG!!!
    Should I upgrade the BIOS?? What would that help to??
    Please help me!!! ? :D

    1.65v is correct. I would go by the BIOS on the temps as they should be most accurate. http://www.almico.com Download Speedfan. I find most accurate for reading temps.
    56c is a little hot but acceptible.

  • [VIA] MSI KT3V and old Asus v3400tnt

    Simple question....can i use an old Asus v3400tnt on a MSI KT3V ?? I have heard people talking about different volts in the AGP slot....1,5v or 3,3v...but i havent found any answers yet

    Hi
    This video card appears to be 1x-2x agp compliant so give it a try.  I could not find on the internet any instance of where the video card was used in a similar system.
    I did find a lot of complaints about the video quality, especially in 3d environments. 
    Low end video cards are very inexpensive and most of them will be a lot better than the old asus card since it appears to be only a 16meg card that used one of the early Riva tnt based chipsets.
    See attached link for examples.
    http://www.zipzoomfly.com/jsp/ProductList.jsp?ThirdCategoryCode=012203&SortBy=A

  • MSI KT4V and radeon card compatibility.

    hi guys...first of all, sorry about bad english, i'm from germany.
    well, the point is, i actually have a MSI KT4V mother board installed in mi pc, and i planed to buy a Radeon 9800 pro graphic card, i have 2 options...buy the BBA (build by ati)..or the sapphire one, i want to know if i will have any trouble of compatibility with both of this cards. Just that, please i'm waiting for your's answers guys

    Codegen don't perform as well as you might think. The info I ask for should be on a sticker on the PSU, inside the case. But I'll help you, since I've been there before.
    As you see below, there is not much room for a Radeon9800:
    "Codegen 400W Pentium 4 ATX Switching Dual Fan Power Supply, Retail Package
    Output:400W
    +3.3V -> 14A Orange
    +5.0V -> 30A Red
    +12V -> 12A Yellow
    +5VSB -> 2A Purple
    -5V -> 0.5A White
    -12V -> 0.8A Blue "
    The info comes from:
    http://www.dealsonic.com/co40pe4atxsw.html

  • MSI KT4V and Radeon X800 Pro...

    Hi all!
    I have a question regarding my MSI KT4V MoBo. Does anybody have any experience installing a Radeon X800 card in such a MoBo?
    I have read earlier that there was a size problem with the 9800 pro series.
    Apparently it is so big that it touches the ram slots!?
    The X800 is smaller though so it may not be a problem.
    Any help will be appreciated  
    Best Regards
    Basse

    I don't see how it would touch the RAM slots, it might just be a problem when you need to remove RAM that you need to remove the card first so you can pull back the RAM clips.

  • MSI KT3V and Barton 2500+ Mobile

    I have those two and can't change the multiplier, which seems to be stuck at default 14x.

    i can tell you as it uses something like 15 as a default multiplier
    you would have to wire trick it
    then you would be able to select up to 12.5
    if you wanted 13,14, etc you would have to wire mod it to them

  • MSI KT400 and RADEON 9700 PRO

    I'm having many problems with this combination: some games don't work.
    I've read there are problems with agp 8x, any advice?
    I can't play:
    mechwarrior mercenaries
    arx fatalis
    platoon
    thanx!

    Since the KT400 is a VIA Chipset based motherboard and this is an Nvidia/AMD/SiS SocketA forum I am moving it to the VIA based forum.
    Perhaps you can elaborate on exact problems and provide a complete hardware listing, including your power supply's combined wattage across the +5v and +3v rails.

  • Questions about my MSI R5770 Hawk Radeon HD 5770 and my Dell Studio 7100

    Ok, I have had this card installed for about a year now. From the beginning Catalyst Control Center had given me error messages, "Catalyst Control Centre: Host application has stopped working. Windows is checking for solutions" every time I start the machine or every time I try to use the Catalyst Control Center. This has not been a problem because I have been using a 2 monitor system using the DVI port from on and the HDMI to Display Port adapter to the second larger monitor (if I went straight HDMI I can't change the settings and I end up with a 1 inch black border around the desktop and the outer edge of the 23" monitor,) so I just worked around with the HDMI to DVI. Well now I am trying to hook up three monitors. One to the Display port through a Displayport to DVI, one to the HDMI through the HDMI to DVI and one to the Display port. No matter what I try to do through the Windows display control panel, I can not get the displayport monitor (which ever is hook to that port) to display. Windows 7 does detect all three monitors, but it will not allow me to "extend the desktop" to the third monitor and I still can't get the Catalyst Control Center to work.
    I have uninstalled all files from ATI or AMD that involve the video and reinstalled the latest drivers and software, but the Catalyst Control center still is not running.
    If you could help me with this it would be great. I am a graphics designer and web designer/developer and not a hardware or software tech and I have been googling and trying different possible answers since yesterday morning.
    My graphics card is
    MSI R5770 Hawk Radeon HD 5770
    My computer is
    Dell Studio XPS 7100, AMD Athlon IIX4 630 Processor 2.80 GHz
    8 gb
    64-bit operating system
    I am attempting to hook up a LG W2361 to the HDMI through HDMI to DVI adapter (presently working) at 1920 x 1080
    an LG W1952 (at 1440 x 900) through the DVI port to DVI (presently working) and
    an old Samsung SyncMaster 170t  to the Displayport through a the adapter (not working) monitor is detected but it will not allow the extend desktop to be applied.
    Hope someone can help, thanks in advance for just reading all of this. 

    Just incase anyone runs into a similar problem. I figured it out.
    Somehow in one of either the ATI driver updates or in a Microsoft update, my drivers and software was contaminated. I deleted all software and drivers for the card, which I had already tried several times. But this time I went into safe mode used CCcleaner in safe mode and cleared the register of all entries. I then reloaded and the Catalyst Control center and it works fine now.
    The problem with the three monitors seems to be that the one hooked to the displayport, if you are using more than 2 monitors, must be hooked to an active displayport adapter. I was using a passive adapter. So either I need to buy a very expensive adapter or.....maybe a new monitor that uses displayport. 
    Hopefully this will help someone else having this issue.

  • MSI KT6 Delta LSR and Radeon 9600 XT 256mb x8 AGP Problem

    hi,
        Ive just brought a Radeon 9600 XT 256mb and it wont run at x8 agp at all, games lockup as soon as i start them, within 5 mins all text on display corrupts and i get a message saying the gpu recover has set the gpu to default settings.
    I cant change anything in BIOS to set it to x4 agp as its not selectable and says AUTO only for agp speed setting.
    Only way to alter is goto smartgart in ATI drivers and select x 4 agp if u get in before text corrupts :(
    Ive managed to get it stable at x4 agp now through smartgart.
    BUT it says on box and in manual this motherboard supports agp x8 but why dont it run it ???
    i havent a clue whats up with it.

    hi,
        Ive got it running stable in x4 agp and found a post on ATI website about some motherboards not working proberly at x8 agp with Radeon 9600 series graphics cards.
    http://mirror.ati.com/support/infobase/4219.html
    Got nice scores in 3dmark 2001 and 3dmark 2003
    But what confuses me is Quake 3 demo that didnt change at all over my old card and radeon 9000 pro i tried once too.
    I got
    174fps with Radeon 9100
    175fps with Radeon 9000 pro
    173fps with Radeon 9600 XT 256mb
    Thats on Athlon xp 1700
    strange or what ?
    oh well its a old demo anyway but main thing is big increase in 3dmark 2001 by over 2000 marks

  • MSI K7T266PRO2-RU and Radeon 9700 (non-pro)

    Hi!
    I'm thinking of upgrading to a Radeon 9700 non-pro,
    and just thought I'd check this forum to see
    if there are any compatibility issues between
    my K7T266PRO2-RU and Radeon 9700 (like
    there were between GF4mx).
    If someone has a similar setup (k7t266pro2 w. 9700PRO/non-pro)
    I would like to hear of your experience with this.
    I appreciate your help.

    Hi,
    I can't remember any problems with it, as long as you make sure the powersupply can handle it.

  • VOX USB2.0 has no TV picture on Radeon 9100

    Expecting that MSI VOX USB2.0 TV tuner will be great solution for me (easy to exchange between PC and notebook) I was surprised founding that it can't work on my PC with on-board Radeon 9100 graphics (9100 IGP chipset on Asus P4R800-VM motherboard). MSIPVS gets available channels regularly but there is no picture, some time I got some audio and that is all. Noting can solve my problem; I have replaced all the drivers (Vox and Ati) with latest but without results.
    Please help. Any suggestions?
    Thanks,
    Cvijetic

    I gave up on the Vox and decided to buy a Hauppauge PVR-350 instead. Unfortunately the PVR-350 also has some flaws (looks like many boards have a design-flaw that gives crappy sound and picturesound latency). After reading on a Hauppauge-forum that I was not the only one I returned the board and got a Hauppauge PVR-250 instead, which reportedly works much better. I can confirm that it did :-)
    I now use it for all my tv watching and recording, and since it's even supported by MythTV I'm going to use this card for my homebuildt PVR.
    Obviously, you DO get what you pay for sometimes. :-/
    Nigritude Ultramarine

  • [Solved] xf86-video-ati driver and [Radeon Mobility 7500] help

    I have an thinkpad T42 laptop (video card is ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]) with openbox and slim and I instaled xf86-video-ati. My problem is that minimizing and maximizing are very slow, lxterminal decoration bar disapear..... I also tried to install xf86-video-ati-git without any improuvements.
    this is my xorg.conf:
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "SynapticsTouchpad" "SendCoreEvents"
    InputDevice "Keyboard0" "CoreKeyboard"
    Option "AIGLX" "true
    EndSection
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    # FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/share/fonts/ttf/western"
    # FontPath "/usr/share/fonts/ttf/decoratives"
    # FontPath "/usr/share/fonts/truetype"
    # FontPath "/usr/share/fonts/truetype/openoffice"
    # FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    # FontPath "/usr/share/fonts/latex-ttf-fonts"
    # FontPath "/usr/share/fonts/defoma/CID"
    # FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    Load "dbe"
    Load "glx"
    Load "dri2"
    Load "dri"
    Load "synaptics"
    Load "extmod"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "CorePointer"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/input/mice"
    Option "Emulate3Buttons" "on"
    Option "YAxisMapping" "4 5"
    Option "XAxisMapping" "6 7"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    Identifier "SynapticsTouchpad"
    Driver "synaptics"
    Option "AlwaysCore" "true" # send events to CorePointer
    Option "VertEdgeScroll" "true" # enable vertical scroll zone
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    EndSection
    Section "Device"
    Identifier "Card0"
    Boardname "ATI Radeon"
    Busid "PCI:1:0:0"
    Driver "radeon"
    Screen 0
    Vendorname "ATI"
    Option "MergedFB" "off"
    Option "AccelMethod" "EXA"
    Option "EXANoComposite" "false"
    Option "FBTexPercent" "50"
    Option "MigrationHeuristic" "greedy"
    Option "DRI" "true"
    Option "GARTSize" "1536"
    Option "AGPMode" "4"
    Option "Colortiling" "On"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Last edited by botzoboy (2010-05-29 07:39:30)

    theapodan
    this is my Xorg.0.log:
    X.Org X Server 1.7.6
    Release Date: 2010-03-17
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.33-ARCH i686
    Current Operating System: Linux arch 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
    Kernel command line: root=/dev/disk/by-uuid/7e750225-da5a-470f-a024-af37495f11d5 ro
    Build Date: 01 April 2010 05:35:33PM
    Current version of pixman: 0.18.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 29 09:20:42 2010
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Default Layout"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "SynapticsTouchpad"
    (**) |-->Input Device "Keyboard0"
    (**) Option "AIGLX" "true"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (II) Loader magic: 0x81e4c60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:4c57:1014:0530 ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 1.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.7.5.902, module version = 6.12.192
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 1.5.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) LoadModule: "synaptics"
    (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
    CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
    CEDAR
    (II) Primary Device is: PCI 01@00:00:0
    (II) [KMS] Kernel modesetting enabled.
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (**) RADEON(0): Option "ColorTiling" "On"
    (**) RADEON(0): Option "AccelMethod" "EXA"
    (**) RADEON(0): Option "DRI" "true"
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
    (II) RADEON(0): AGP card detected
    (II) RADEON(0): KMS Color Tiling: enabled
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): Output VGA-0 using monitor section Monitor0
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Using user preference for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1024x768
    (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (II) RADEON(0): mem size init: gart size :fdff000 vram size: s:2000000 visible:1f00000
    (II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules/libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.7.6, module version = 2.5.0
    ABI class: X.Org Video Driver, version 6.0
    (--) Depth 24 pixmap format is 32 bpp
    (II) RADEON(0): [DRI2] Setup complete
    (II) RADEON(0): Front buffer size: 3072K
    (II) RADEON(0): VRAM usage limit set to 25804K
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Render acceleration enabled for R100 type cards.
    (II) RADEON(0): Setting EXA maxPitchBytes
    (**) RADEON(0): Option "MigrationHeuristic" "greedy"
    (**) RADEON(0): Option "EXANoComposite" "false"
    (II) EXA(0): Driver allocated offscreen pixmaps
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (II) UploadToScreen
    (II) DownloadFromScreen
    (II) RADEON(0): Acceleration enabled
    (**) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Set up textured video
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (WW) RADEON(0): Option "MergedFB" is not used
    (WW) RADEON(0): Option "FBTexPercent" is not used
    (WW) RADEON(0): Option "GARTSize" is not used
    (WW) RADEON(0): Option "AGPMode" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 270 x 203
    (**) Option "Protocol" "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "ExplorerPS/2"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (**) Option "Emulate3Buttons" "on"
    (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse0: ZAxisMapping: buttons 4 and 5
    (**) Mouse0: Buttons: 9
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) acceleration profile 0
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (II) Synaptics touchpad driver version 1.2.1
    (--) SynapticsTouchpad auto-dev sets device to /dev/input/event7
    (**) Option "Device" "/dev/input/event7"
    (II) SynapticsTouchpad: x-axis range 1472 - 5472
    (II) SynapticsTouchpad: y-axis range 1408 - 4448
    (II) SynapticsTouchpad: pressure range 0 - 255
    (II) SynapticsTouchpad: finger width range 0 - 0
    (II) SynapticsTouchpad: buttons: left right double triple
    (**) Option "VertEdgeScroll" "true"
    (--) SynapticsTouchpad: touchpad found
    (**) Option "AlwaysCore" "true"
    (**) Option "SendCoreEvents"
    (**) SynapticsTouchpad: always reports core events
    (II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD)
    (**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
    (**) SynapticsTouchpad: (accel) acceleration profile 0
    (--) SynapticsTouchpad: touchpad found
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "XkbRules" "base"
    (**) Keyboard0: XkbRules: "base"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
    (II) AutoAddDevices is off - not adding device.
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device ThinkPad Extra Buttons
    (II) AutoAddDevices is off - not adding device.
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) AutoAddDevices is off - not adding device.
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) AutoAddDevices is off - not adding device.
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (II) AutoAddDevices is off - not adding device.
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Sleep Button
    (II) AutoAddDevices is off - not adding device.
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Video Bus
    (II) AutoAddDevices is off - not adding device.
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) config/hal: Adding input device Power Button
    (II) AutoAddDevices is off - not adding device.
    (EE) config/hal: NewInputDeviceRequest failed (8)
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) AIGLX: Resuming AIGLX clients after VT switch
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (--) SynapticsTouchpad: touchpad found

  • MSI KT3V + Sound Blaster Live Problem

    Hello Guys
    First, sorry for my english, i'm polish.
    Yesterday I sold my old motherboard (Shuttle AK32A), and i bought new motherboard MSI KT3V.  After instaling all peripheals I install on formated partition Win2000 SP3, Via 4in1 4.45, Drivers for my GF4 MX440, Network Adpater 3Com-SOHO, and sound blaster Live 1024. After this i instal game IGI2, and try play, After 30 s. in game main menu my computer crashes, screen is black, led on monitor is lights on yellow, after this i hear 10 - 20 second music from main menu in speakers, after this time my computer crashes completely, a hear beeeeeeeeep from speaker, and this moment I can only push reset button :(
    I try install many version drivers, from orginal cd, downloaded from internet. And newest version from 1.03.2002. An nothing :( I remove my Live 1024 from computer, and put friend live 5.1, and no changes, computer crashes :(
    My desktop resolution is 1128x864x32 bits 100hz When i try play  Divx movies after 1 - 2 minuts, frequency of my screen automatic swicth to 50 hz. If I try manualy switch frequency to old value (100 hz) nothing hapend, and i only can restart system :(
    When i work on my desktop (Word, IE, Winamp etc.) after 5 - 20 minutes, my system crashes too (yelow LED on monitoir, black screen, same situation) and I can only push reset button. When i remove card from pc, or turn card off in device manager all works fine.
    I upgarde bios to newer wersion (1.8), reinstall drivers, reinstall windows in APIC options turned off, remove network adapter, and no changes :(
    P.S. On old Mothearboard all works fine :(
    Anyone can help me solve this problem. Please
    Grettings Mark
    My Hardware
    MB: MSI KT3V
    Athlon 1700+
    512 MB DDR 266 Mhz
    3Com-SOHO Network Adapter
    WDC60 GB +  8.4GB Seagate
    GF4MX440 64MB InsideTNC
    CDRW Teac 40x, CD LG52x

    Quote
    Originally posted by maesus
    Also set PCI Delay Transaction enabled.
    This was a solution for my problem :-)
    Thank you very much. You have beer from me :-)
    Grettings

  • K7N2 AND radeon 9500 : NO post!!

    Hallo @ all!
    I have a big problem.
    i read some similar issues all over the forum with the K7n2 and radeon 9500/9700 and Kingston RAM.
    Well, i have 2x 256 MB 333 cl 2.5 kingston ram.
    when i use the radeon 9500 non pro 128 MB, the fan just moves a short time and the system is off and can only be put on after PSU switched off.
    So I cant switch on my SYSTEM ! (
    PSU enermax 365 (3.3V 32A    5V 32A )
    the graphics card works, tested on ECS K7S5a AND MSI KT400!
    with SAME PSU.
    AGP is OK tested with GF 2 mx.
    but not the combination 9500 AND K7N2.
    im so sad!
    i have to run the syst with a VODDO BANSHEE :-(
    the system is ok, if i remove the 4 pol aux power plug from the graphics card, BUT: then the graph card hinders system from booting. (intentionally , its made by sapphire)
    If sombody has a solution or a tipp PLZ PLZ PLZ help.
    Greetings, JENS.

    Hello!
    I found a "solution". although u cant call it so... .
    Well, 1st i tried an enermax 465 watts, but of course, the problem is the same.
    the fans just moves 1 sec and then u cant do another till u switch PSU off/on.
    its no RAM problem, because system ran fine with voodoo banshee PCI.
    so i tried sth. "brave" :-D .
    but what should happen bad, if the Graphics card is layed out for the 12V ???
    I removed the 12v Power plug, booted the system till the Warning: plug in 12V aux power in ur radeon 9700....
    (i posted before, that system starts till this point when power plug (12V) is removed).
    And then I plugged in and hit the RESET button:
    See, system booted well *sheesh*.
    But, its no solution due to its necessary any start....
    So, would U built in a delayed switch, which overtakes this work, or would u send in the Mainboard?
    Greetings, Jens.
    What a curies thing a PC is...

  • MSI 4850 and Power Play

    I recently bought a MSI R4850-512M Radeon HD 4850 (have installed the latest ATI 8.11 drivers and Catalyst Control Center).  I have not found any way to use ATI's powerplay technology.  Can someone please help me with this?
    CPU: Intel Core 2 Duo E8500
    Motherboard: Gigabyte GA-EP45-UD3R
    Memory: 2x2GB DDR2 SDRAM
    Video card: MSI R4850-512M Radeon HD 4850
    Hard drive(s): 640 GB
    Operating system: Microsoft Windows Vista Home Premium 64-bit
    Power Supply: Antec 500W

     As far as I know only on the HD 3800 for desktop cards. >> ATI Powerplay <<
     At the bottom of that page in my link click on: Desktop Graphics Processors

Maybe you are looking for