Msi KT4AV with AMD ath. 2500

hey hello there
Here is my question I m planning to buy msi 6712 KT4AV with amd athlon 2500 (333mhz 512 kb)
bios update 5.1 run ok
but Athlon(tm) 2500+ see
what is my problem ---->(tm)can't see athlonXP 2500+
my english language small

okey tomorrow
because goto my house tomorrow
my office now

Similar Messages

Msi KT4AV with AMD ath. 2500 (333mhz)???

hey hello there
Here is my question I m planning to buy msi 6712 KT4AV with amd athlon 2500 (333mhz 512 kb)
Is mainboard a good choose??? Can I overclock it and run like 2400-2500 mhz...
please help me because 1 m Planning to buy it today..

Hi........
Hope its not to later..........
The KTV4A is the newer version of the KTV4 with the only real change being the 400A chipset on the newer board, as for overclocking this and its earlier brother were made for it with settings for the cpu range from 100-0299
If asked I would say go for the earlier version as this board does not have the issues that the newer board appears to be suffering (KT7A anyone?).
Hope it helps
Spunkmyer

KT4 Ultra-SR (MS-6590) dont work with AMD Barton 2500+

;( Please help me any1.
I have MBO KT4 Ultra-SR (MS-6590) with CPU AMD Barton 2500+ and i have a big problem. System corectly boot only if a select CPU FSB Clock = 100 MHz (CPU Ration/CPU Vcore/DDR Voltage=all AUTO). When a select CPU FSB Clock 133 or 166 MHz, system begin run corectly and after few second turned OFF. I selecting SDRAM Frequency on=AUTO/266/333/400 MHz but not working. My old CPU is AMD XP Palomino 2100 MHz and work fine with KT4 Ultra MBO. I upgrade BIOS with 1.4 version. I change memory module with PQI (PC 2700/256 MB) and JETRAM (PC 2700/256 MB) but is same ":censored: ". System dont work. Bad CPU Barton 2500+? I dont no. Please help me any1.
My System:
MBO KT4 Ultra-SR (MS-6590)
CPU AMD Barton 2500+ (FSB 333)
Memory DDR Samsung 2x256 MB (PC 3200) K4H56083D-TCC4
Cooler SPIRE WhisperRock IV+Artic Silver 3
HDD Seagate Baracuda 120 GB SATA
PSU Enermax 300W EG301P-VE(FMA)
VGA Saphire ATI Radeon 9100 (64 MB+TV/DVI-out)
DVD-ROM Pioneer 120S (16x speed)
CD-RW MSI CR52-A2 (52/24/52, Atapi)
FDD Teac 1.44 MB
Creative SoundBlaster Live! 5.1

Most of the time, this sort of problems arise because of power suppliy issues.. U have a enamax 300W PSU which is a VERY GOOD PSU but might just be on the line...
If u can, try swapping the PSu for a good 400 or a 420W PSU.. this might solve your enigma.. I really dont think this is your processor...
Read this two articles on PSu wrtten by one moderater which will aid in solve in fixing your problem (PSU1 , PSU2 , Troubleshooting Guide )
Best of luck
RAsika

MSI MB with AMD Phenom CPU running Flight Simulator X

Is anyone running Flight Simulator X on an MSI motherboard with an AMD Phenom CPU?

A game that old should be just just fine on your system and the HD 3200 integrated graphics on that MB & with the requirements shown below for the game
System requirements
1.0 GHz CPU
256 MB RAM (for Windows XP SP2) or 512 MB RAM (for Windows Vista)
14 GB hard drive space (15 GB for Deluxe Version)
DVD drive
32 MB DirectX 9.0c compatible video card 1024 x 720 screen resolution or higher

I have an old computer with AMD Sempron 2500+. Does it work with Firefox 4, or is it too old/slow?

..or is it another sakes why it's not worth to try to use firefox 4 with this computer.

http://www.mozilla.com/en-US/firefox/4.0/system-requirements/

Where can I find the system requirements for each version of firefox. I would like to know which version of Firefox is best for my 6-8 year old computer with AMD Sempron 2500+ 1,75 GHz and 512 RAM.

I tried to find information of that very hard in your pages but missed. Is it possible to have system requirements somethere in firefox homepages?
I don't want to try a newer version and then have a hard fishing of the earlier version which works.

Just change the version number of following links
like this
* http://www.mozilla.org/en-US/firefox/3.6/system-requirements/
* http://www.mozilla.org/en-US/firefox/7.0/system-requirements/
* http://www.mozilla.org/en-US/firefox/5.0/system-requirements/
* http://www.mozilla.org/en-US/firefox/8.0/system-requirements/

MSI KT4AV-L w/ Radeon 9800 Pro at 8x Lockups!

I have the latest 4 in 1 drivers, and the latest Catalyst drivers and it seems that whenever I try running 3DMark2001SE it locks up almost immediately. Now if I use SmartGART to lower my AGP from 8x to 4x it runs flawlessly. Though I can't help feeling that there is some sluggishness in the video. I actually think that my old 4x GeForce 3 Ti500 ran smoother! (I had that on a Soyo Dragon Plus motherboard)
System configuration:
MSI KT4AV-L
Athlon XP 2500+
Radeon ATI 9800 Pro
2 sticks of 256Meg Corsair
60Gig IBM Deskstar
Yamaha 24x CDRW
Cendyne (Pioneer A05) DVD-RW
Antec Sonata case with 380W PS
+5v 35A, +12v 18A, +3.3v 28A, -5v .5A, -12v 1.0A, +5v SB, 2.0A

Quote
If you don't have an actual solution, then please don't post. Thank you for your input.
Not a good way to get help.
Welcome to the world of "new" technology, it takes a little time to get it perfected. As mentioned earlier in the thread, 8X has no perfomance advantage over 4X, and 8X is causing problems, that disappear by using 4X. Until ATI and/or VIA can develop a cure, you have 2 choices:
1. Run 8X mode, and live with the problems.
2. Run 4X mode, and have no problems, and no loss in performance.
(Steps down from soapbox)

MSI KT4AV 4 RED LEDs WON'T BOOT

Hi. I recently purchased a new MSI KT4AV motherboard, new AMD Athlon 1.33 Ghz CPU, and new PC2100/DDR266 DIMM RAM, and when I turn it on, all 4 LEDs on the diagnostic bracket light up RED (meaning processor failure). Does anyone know what could cause this?
My system specs:
MSI KT4AV motherboard
AMD Athlon 1.33 Ghz 200 FSB CPU
PC2100/DDR266 DIMM
420W PSU (+3.3/28A, +5/40A, +12/18A)
Hopefully that's enough to diagnose any problems because it won't output any video, just 4 red LEDs on the D-bracket.
Thanks.

Hello,
When I bought my second KT4AV, I was planning on using an Athlon T-Bird 1.4 I had laying around in it. It had the exact same problem as you are having, it just didn't work. I then tried a Palomino 1700+ I had in a another computer that I knew worked fine - it was (and still is) in a K7T266 Pro2-RU - and it didn't work either.
I was thinking the motherboard was bad but I bought an Applebred Duron 1600, and it worked perfectly! So it would seem that even though they are listed as compatible, the older Athlon T-Birds and Palominos simply will not work. My advice to you, buy an Applebred Duron, or better yet, an T-Bred XP 2000+.
Sorry if that wasn't what you wanted to hear!
-James

MSI 6712 (KT4V) Problem AMD Ath Barton 2500+

Hi guys , im wondering if u can help me
ive got a AMD Barton 2500+ running @ 1498 instead of 18XX , ive tried the following,
Setting Vcore standard to 1.65
FSB 166 , System does not boot
FSB 133 , System thinks its a AMD 1900+
FSB 150 , System does not boot
FSB 100 , System thinks its AMD 1100
so now im running 1498mhz instead of 18XX mhz
every time i have to reset the bios to make it boot again ,
My memory = Whitelike 333 DDR 2x 256mb Pc 2700 (single sided)
My GFX = Chaintech Gf4 64mb AGP 4X
Running XP sp1a Professional
Any ideas setting it to 18XX ??
ive tried all the ratios 11 , 10 , 4 , 12.5 , 11.5 , 13.0 14 , 15 nothing seems to work
even setted the memory to 200mhz , that didn't work ...
Any ideas?

Well Mate - If the temperature in safe mode at the lower CPU Speed is that high then it means at the proper speed the temperature would be high enough to prevent the system from booting.
And according to what you wrote about the white paste I suspect that your installation of the heatsink is the cause of the problem - which brings us back to the point - have you tried re-installing the heatsink with a thermal pad - not the silicon paste as per AMD instructions?
Anf if after following AMD's installation instructions to the letter you still have the problem you may have a faulty CPU - but unfortunately you will find that you have voided your warranty if you have used any paste instead / as well as the original Thermal pad.

KT4AV-L PROBLEMS !! with AMD Sempron 2400

Dearest friends, I've got a nasty problem with the brand new MSI KT4AV-L + SEMPRON 2400 just bought from my dealer.
The FSB clock can be set ONLY to 100MHz or the CMOS BIOS will NOT EVEN START !!!
When I put 133MHz or 166MHz (the correct one) into BIOS FSB settings ... the system won't boot, WON'T BOOT NOT EVEN the CMOS BIOS AMI (latest release available = 5.4 ) will boot.
This is VERY BAD AND VERY NASTY problem because the board is listed in the AMD recommended boards list and should have 0 problems while running the Sempron to its 1600MHz ... instead of the ACTUAL 1.000MHz I HAVE NOW !!!! and this turtle speed its making the whole system disappointing.
Anybody can help with this ?
What am I doing wrong ?
Many thanks
Seguace

oh my gosh! I can't believe! you have to be a kind of magician, your PSU it's the weakest that I ever seen! 5a it's extremely low! I don´t how did it works now, even at the lower speed, please try another PSU ASAP! at least 400 watts, and on the 12v rail at least 18a (at least, I mean minimal).

Newly Built System. MSI K8N Neo4/SLI Plat with AMD X2 3800 Crashing in all Games

I just built this system yesterday..
MSI K8N Neo4/SLI Plat with AMD X2 3800 latest BIOS 3.7 amd MB drivers
I have a Albatron Geforece 7800 GT PCI-E 256Mgs with the latest Drivers. 78
WINXP SP2 latest stuff.
DirectX 9.0C
I have 2 512 DDR3500 Memory Sticks.
SATA 160 Hard Drive
DVD 8X NEC Burner
All 3d games lok it up. 3DMark2001 SE locks it up too.
I ran Memtest and everything passed fine.
Anyway all 2d video works fine. but any 3d video screen goes black and the system locks up solid.
Any help work be appriciated
DaaDoctor

Welcome to the forum DaaDoctor
If you creat a signature (in profile) it will save you having to type your spec's out each time or us looking for it. Use mine as a template.
What PSU are you using ? Can you list the power output ? (writen on side of psu)
Going from your specs you listed your graphics card is very hungery on power so I would suggest your psu isn't up to the job under load.
Post the spec and we will know for sure.

Msi A88 GX45 with Amd A10 7850k Random Freezes

i had frezes randomly sometimes one a day sometimes 5 times in 2 hours. it doesnt matter its on heavy load or normal load.
My Temps Are From Msi COmmand Center ;
CPU : 40 Degree idle - 50 Degree Max on load.
Motherboard : 35 Degree on idle - 42-45 Degree on load.
System Specs ;
Msi A88 GX45
AMD A7850k
Kingston Hyperx Beast 1600 Mhz x 2
Ati Saphire 5770
Cooler Master 650W GX series Bronze Psu (Single Rail 52A)
Samsung 128 gb SSD + 1 Samsung HDD + 1 WD HDD
Zalman Z3+ Case With 5 Akasa Viper Fans And Akasa Venom Cpu cooler.
Operating System is Win 8.1
Before Here What i do ;
i bought pc 4 weeks Ago first i bought i had Asus a88xm-a motherboard it has freezes too Because i changed my Mobo to Msi Still have Freeze
i tested memories with memtest and Windows Memory diagnostic tool
i had 450W PSU i changed it to 650 Cooler Master
i installed drivers are updated.and Updated bios
i tried to reinstall Windows 5 times still freezed
my bios working on factory settings nothing changed.
i tried to use Memories XMP profile 9-9-9 1.65 V and its Auto Profile 1.5 V and i tried to set 11-11-11 1.5 V Manually nothing changed.
i tried to replace my graphic adaper and just use my Cpus Gpu nothing changed
Except of Theese ;
i find little solution but i didnt like this soluotion :
When i disable C6 state and amd cool and amd cool and quite feature from bios my computer Works nearly 3 days stable without freezes in this 3 days i just got i BSOD it has _Watchdog_ just 1 time .
Cos of disabled c6 state i cant use Turbocore and power saving features. my cpu is always working on 3.7 mhz without c6 state and i didnt liked this situation ok maybe it solved my freezing problem but still something is wrong help pls

Quote from: Nichrome on 07-September-14, 22:47:54
Hi,
I think AMD chips has pins on the CPUs not sockets right?(correct if not). Take CPU out and look for bent pins, as if it fails to work properly in 2 different boards then there is something wrong with it. Use magnifying glass and bright light to see any imperfections.
I concur, if it's doing the same thing on 2 different boards, I would look at the chip as the culprit. I would test my RAM and PSU also.

Msi kt4av problem - overlay??

Hi,
I can't get rid of a very serious problem. I have bought a MSI KT4AV board together with AMD Athlon XP 2500+ Barton processor and ATI Radeon Graphics card. I get very weird things on my screen every time I want to play a movie or see a picture in the standard Windows XP picture browser. I don't see any JPEGs in IE either. I thought the reason for this was the incompatibility between the ATI card and the VIA chipset and exchanged this board for MSI nVidia GeForce FX5200. I also changed the motherboard with another piece of the same type but the problem still remains. To give an imagination of what happens: http://www.volny.cz/smudlicek/screen/screen.jpg . I am a little bit desperate. I don't think the problem could be in the processor I am still suspicious about the board. Any clues??? Thanx
Maacek

Quote
Originally posted by Fredrik Åsenius
4in1 drivers installed properly?
Changed anything in BIOS?
If it is mostly jpeg, I would check the file association. In my system there is no program assigned, /Explorer/Map alternatives in ME and in Swedish).
It doesn't display jpegs well on webpages. The 4in1 drivers are installed, BIOS unchanged. File assosiations are for sure not the cause for this problem.

Planning To buy MSI K9N Platinum + AMD X2 3800+

Hello everyone,
as the title as Iam planning to buy a MSI K9N Platinum board with an AMD X2 3800+ for a new system build. Ive been out of the game for a while, the last time I was really up to date on computer technology is when the AMD XP 2500+ Barton was the hottest thing on the market, some what of a new comer to dual core technology. I have a few questions, mainly about the board it self. I did a little searching and that answered some of my question but I have a few more.
Ive read a lot about the shutdown problems from the board when transferring large files or burning DVDs. I have a few questions about that.
From what I see so far, this is a very informative forum and I appreciate any and all information. So here goes:
1) It says on the MSI website that the ram slot for this motherboard is at 1.8 volts. The ram Iam planning to get is OCZ Platinum EL XTC PC2-6400 1GB 2X512 DDR2 CL4-5-4-15 240PIN DIMM Dual Channel Memory Kit. On the OCZ website it says that the ram modules run at 2.1 volts. My Question is if I stick this ram in the mother board will it boot long enough for me to go into the bios and change the ram voltage to 2.1 volts?
2) Now Ive read about the shutdown problems with this board. Ive seen a lot of people up the VCore to 1.35V. If I do this along with a bios flash, will this take care of the problems?
3) Now the dealer that Iam buying my PC from didn't have this board in stock for the last week. He just got them in 2 days ago this week. Therefore Iam assuming he has the lastest version of these boards. Now are these problems taken care of on the new version of these boards? If not what can I do to get rid of them?
4) Is there anything else I should know about this motherboard?
Thanks for the the help.
Ron

1) It says on the MSI website that the ram slot for this motherboard is at 1.8 volts. The ram Iam planning to get is OCZ Platinum EL XTC PC2-6400 1GB 2X512 DDR2 CL4-5-4-15 240PIN DIMM Dual Channel Memory Kit. On the OCZ website it says that the ram modules run at 2.1 volts. My Question is if I stick this ram in the mother board will it boot long enough for me to go into the bios and change the ram voltage to 2.1 volts?
Yes, you could set up manually the voltage to 2.1v perfectly I've got one k9nsli p, with an amdx2 3800+ whit 2gb ddr2 (512x4 twins pack corsair xms2 ddr2 800) that works at 1,9v
2) Now Ive read about the shutdown problems with this board. Ive seen a lot of people up the VCore to 1.35V. If I do this along with a bios flash, will this take care of the problems?
My shutdowns problems was resolved by unnistallin' nvidia IDE controller, nothing about vcore or flashin bios... I keep original bios version 1.0 & Core center shows vcore at 1.33v
3) Now the dealer that Iam buying my PC from didn't have this board in stock for the last week. He just got them in 2 days ago this week. Therefore Iam assuming he has the lastest version of these boards. Now are these problems taken care of on the new version of these boards? If not what can I do to get rid of them?
Good question... 2morrow I'll check on the box of my k9 the part number and will post it
4) Is there anything else I should know about this motherboard?
The first week, I was desire burn my k9 shutdowns... shutdowns.... shutdowns... after I find the cause of that ShiX$/#(! (nvidi IDesuxs controller) my life is happy!
good luck
Thanks for the the help.
Ron

What's happened to my board? (MSI KT4AV-L)

I have a bit of a problem,
I have a MSI KT4AV-L with a AMD Athlon XP3000+ Processor.
Here's the mail i've just sent to the tech support of where I got the board from..
Quote
Yesterday, I started to have problems with the internal network port - it was not finding the my gateway, however when I tried the exact same cable and router port on my laptop, it all worked fine.
I decided to reformat and re-install windows XP, in case it was a software error, however this still didn't solve it. The basic problem was that I was getting Timeouts - I tried pinging the router and it was a mixture of successes and failures.
I went into the BIOS and changed back to "Default" settings and restarted - this has made matters worse - now my Graphics card is not working correctly and i'm not able to see anything on the monitor at all due to this.
These facts have made me feel that the Motherboard kid is faulty - I also noticed that the XP3000 chip I had was only showing up in windows as a 1.9ghz processor - not sure if this is correct or not.
Do you have any suggestions or can you give me a manufacture contact so I can try and resolve this issue without needing to send it back - I would appreciate a quick reply as I use this machine for work and it is causing me to delay some freelance projects that I am working on.

Hello,
Did they get back to you?
Please make a list of all your components, including the power supply + details of the sticker.
eg,
+12v = 10a
+5v = 20a
XP3000+ is 2.16Ghz
You need to enter the BIOS and set the FSB to 166Mhz.
Press DEL when you turn the PC on or restart,
go to Frequency/Voltage control > press enter
FSB > press enter, change it to 166Mhz. >press enter
press escape, then goto save and exit > Y > press enter
So that is one problem out of the way.
GFX card problem, is your card AGP 4x or 8x?
Now would be a good time to post that list

Msi KT4AV with AMD ath. 2500

Similar Messages

Maybe you are looking for