Msi Kt4v With Msi Fx 5200 Td 128 Crash

WHEN I PLAY SOME GAME, FOR EXAMPLE, PRINCE OF PERSIA OR ANOTHER APLICATTION THAT USE DIRECT3D, MY PC FREEZES AND REBOOT.
WHEN I PLAY DXDIAG...THE PC FREEZES TOO
I INSTALED THE LAST VERSION OF THE DRIVERS AND VIA 4 &1 AND LAST VERSION BIOS TOO. I FORMATED THE WINDOWS MANY TIMES.
I THINK THAT AN INCOMPATIBILITY WITH MSI TD 128 FX 5200 AND MSI KT4V ( KT 400).
WHAT DO YOU THINK ABOUT THIS?

I have windows xp sp1
palomino 1,8 - 266 MHZ
256 ddr - 266 mhz
hd maxtor 40 gb - 7200
PSU 500 W -
+3.3 = 28A
+5v = 50A
+12v = 18A

Similar Messages

MSI KT4V with usb+bios problem!

hi i have an msi kt4v motherboard: http://www.msi.com.tw/program/products/m...ODEL=MS-6712...
and it wont startup my keyboard until windows loads.
i even updated my bios to the vary latest one....in the bios list there is a bios with this details:
BIOS Type AMI® BIOS File Size 514KB
Version 1.7 Update date 2002-12-26
Update Description -Support AMD Barton XP2800+ (FSB333) CPU
-Fixed system sometimes will have IDE CRC error
-Fixed D-bracket2+USB keyboard, cannot use keyboard on DOS mode.
Special note ,
Download 6712v17.exe
that suppose to fix my prob. its not the latest though, the latest is 1.8. i updated to 1.8 directly, i didnt upgrade from 1.7 though, but from an earlier version. is anyone else experiencing this problem? whats strange is that it will work if i clear the cmos and reboot. but then if i restart it wont work. do i have to upgrade to 1.7 then to 1.8?

I have the same problem too. My keyboard\'s cable failed and I replaced it but made it USB only, after the later bios releases it stopped working until windows loaded.
Legacy support is turned on to no avail. I've been keeping a ps/2 keyboard handy for when I have to get into bios or some other command level operation.

Please help: New MSI R6770 with MSI MS-7093 main board doesn't POST

I'm upgrading my son's HP a1130n which has an OEM MSI MS-7093 main board. I purchased the MSI R6770 based on a local retailer's advice.
I took the following steps:
- upgraded the power supply to a Cooler Master RS500-PCARD3-US 500W
- set the BIOS to boot with PCI-E video
- installed video card, attached 6 pin power connector, and powered on
With the video card installed, the computer runs all fans at maximum speed. No POST beep.
After taking the card out, the computer returns to normal.
I thought I'd ask for advice here before returning the card. Thanks.

Thanks for the response.
I would have to purchase a card to try it. One of the main reasons I went with this card is that with the motherboard layout the RAM is directly in line with the PCI-E slot. Many of the NVIDIA cards have a long form factor with a large fan housing that would physically interfere with the RAM.
So there's a known problem with the current generation of ATI cards on some motherboards? In that case, going to a lower powered Radeon series wouldn't help?

MSI KT4V and Barton 3000+ crash problem

Hi all!
I recently upgraded my PC (MSI KT4V) with an AMD Barton 3000+ CPU. Before I had a 2600+ Throughbred.
With my old 2600+ I could run my system stable with a FSB set at 166. It couldn't go much higher that 175 before the system became unstable.
With my new Barton I have a problem :
With my FSB set at 166 games like Far Cry and COD crashes. Explorer crashed at sites with Flash content (flash.ocx error report) otherwise no problems. My Pinnacle studio 7 program couldn't render playable movies.
After I underclocked my CPU, setting the FSB at 154 giving me a total speed of 2GHz, all problems are gone now
My system reports a CPU temp at 48 degrees celsius at a 166 FSB setting but could it be a cooling problem anyway?
I have used Artic Silver as thermal paste on the CPU die.
I have reset my memory timings to CAS 2,5 even though the Corsair RAM supports CAS 2 to get the most stable system.
Is the KT 400 chipset up for the job with the increased speed?
I would like to get the most performance out of my new Barton so I hope that some of you guys can help me out here.
My system spec is :
Win XP SP1 and SP2
CPU : AMD Barton XP 3000+
Motherboard : MSI KT4V (Bios 1C0)
Soundcard : SB Audigy 2
Graphics card : Radeon 9800pro 256
Memory : 1GB Corsair XMS (CAS 2)
Power suply : Antec 480W
All latest drivers installed
Best Regards
Basse

Hi Osnavi!
48 degrees is an idle temp and about 51 stressed.
The processor is an Athlon 3000+ 333MHz
The cooler is a Thermaltake Silent Boost
I have 2 modules 512 MB Corsair XMS PC 2700 333MHz placed in slot 1 and 3
I forgot to tell that I ran memtest386 with the fsb set at 166 and I had error reports on the 128Kb L1 cache right away. Lowering the fsb to 154, the memtest came out alright.
Should I remove the heatsink and reaply cooling paste - silver-free maybe?
Strange
Any ideas are welcome
Best regards
Basse

MSI KT4V problem with DDR400

I have a look about product description of MSI KT4V, that I own
and there is a limititation of some DDR400 modules. I wish to upgrade my APACER 512MB 266MHZ CL2 to higher frequency, but I have still doubt if I should buy only 333Mhz. - because in my PC store they are selling only APACER and AM1 memory modules.

I don't think you read my post properly.
The SBLive works fine when I have my old HDD in the computer with all the old settings, but when I removed the old HDD and put in the new one with a completely brand new installation of everything (I even had to partition & format the drive), the damn thing stops working.
As for 4.48v being the problem, it is unlikely, because that was the drivers I had installed on the old HDD and they worked A-Ok.
Please re-read my post.

MSI KT4V Motherboard not recognizing my FX5200

I just started building an old computer for a friend. Im taking parts from two older computers and putting them into one. Im taking my friends processor, hard drive, dvd drive, floppy, and ram. Im putting that into my old PC case with my old geforce fx 5200, my old MSI KT4v Ms-6712 ver:1 AGP 8x motherboard. I used to use that old case with that motherboard and video card and it worked fine. Now all the sudden, possible from moving the motherboard from different PCs and such, when i put everything into the case it all seemed to work fine. Except that I'm not even getting a signal from my video card. I have a 350watt power supply that i know is sufficient enough, but my monitor isn't getting a signal from the video card. I tried using an old geforce 2 from a friends PC to test it and it doesn't work in that PC either, so i've ruled out it being a problem with the video card, because my fx5200 works fine in my other friends PC. ??? I'm wondering if their is a problem with my motherboards AGP slot not being able to detect my FX 5200. I know that moving a different processor to a new motherboard requires the reinstallation of windows, but i should be getting something on the monitor. Any suggestions or helpful information would be nice. I've searched the internet and google for quite some time and i havn't found any helpful information about possible broken AGP slots or the motherboard not even getting a signal through the AGP card. Help would be nice- If i left out any important information please let me know, thanks
¤Yan the Samurai Smartie¤

Well, heres what i tried to do. I tried clearing the cmos. Going by these instructions
1-touch PSU to clear static
2-remove the motherboard battery
3-switch Jbat1 jumper from 1-2 to 2-3
4- wait atleast 10 minutes
5-switch jumper back
6-reinsert the battery
7-boot up etc.
I did all that but still no luck. The screen was still blank when i booted it up. I didn't unplug everything before resetting CMOS(by that i mean the harddrive, floppy, and DVD, but i did unplug it from wall and everything), because it didn't say to in a MSI support page. I did try to boot up with the barebones setup though after resetting cmos but still no luck. Just the CPU/heatsink, motherboard, one stick of ram, and video card. Still nothing happening on the screen. I do have an extra power supply and im going to try putting that in next. The one that is currently in there was used in my friends PC and was working fine. Ill give my larger power supply a try though. Ill post back later about if the power supply did anythiing or not. Thanks
p.s.-Before you mentioned the standoffs and im going to look under the motherboard as well to see if their are too many or too little. The testing continues....

Msi kt4v and tv-cards, a no-go ?

Hello ,
I just wanted to share my experience with this board and tv-cards . It seems not one tv card seems to work as it should on this board !??!
This is the conclusion i must come too after having tested several cards off different manufacturers.
radio on these cards does work without a flaw , but whenever tv function is used , screen output is garbled, just impossible to watch.
I wonder where the problem lies :
having had those cards in an kt7a (kt133a chipset) from abit without a problem and also on an msi intel bx mobo without probs,
i can only conclude its the freaking mobo witch does something wrong, might it be the VIA kt400 ???
it is not os related since all pc have same os = Win XP.
APIC doesnt make a difference and it shouldn't as apic is a part of pci 2.1 standard (so is acpi). after trying every possible permutation of pci card / slot configuration nothing helps.
Can someone research this further ?
whenever cpu usage goes up to full i even had some more garbled pics where something was vissible : this is very strange, de cpu seems to send out high frequencies that mess up the system somewhere.
sys specs :
MSI KT4V version 1
bios 1.8
XP 2500+
512Meg 333 DDR 1 stick
enermax 460Watt PSU (430 true watts)
GeForce 3 Ti200 hercules
SB audigy
RTL 8139 nic (el cheapo)
2 * seagate barracuda IV 40 gig
cdrw plextor
dvd pioneer
tested cards : hauppauge wintv series and aver tvphone series
greetings

hi maesus,
all those options have already been tried and nothing really does any affect accept when i ennabled cpu halt detection: it got even worse, i never used that option to start with
changing pci latency did nothing and i keep it at lowest possible therefore.
delay transaction enabled did nothing and i keep it dissabled since i have no problem with the audigy installed, the sound is perfect. also tried combinations of these settings.
i also can't seem to get 256Meg AGP aperture size to be recognized when set in bios to 256 all possible programs return a size of 128 ?
i also tried diferent winxp kernels : acpi uniproccesor (with apic) , advanced configuratio..... kernel, standard pc kernel. no differences whatsoever. everything works as it should witch is in fact great , except the darned tv-cards, that is to say, their picture is messed up.
i wish i could try it on an nforce2 board
greetings

NO SOUND - using the MSI KT4V 6712

I have recently formatted my hard drives and installed MS Windows XP Pro +SP1 and also installed a new case.
Soon as i turned it on the sound didnt work.
I then tried almost everything inside windows to try to get the sound drivers working but to no success...
I have installed loads of different drivers - AC 97 Audio ones
Tried different speakers and headphones but it still doesnt work
Could it be something on the motherboard as there are two wires hanging around???
SPECS (RIG) :
THERMALTAKE V2000A WITH 7 X 8CM CASE FANS
JEANTECH 400W PSU
MSI KT4V MOBO
AMD BARTON 3000+ @ 2.22 GHZ
1 GB DDR333 RAM
HERCULES 9800 XT
2 X 160GB IDE SEAGATE HARDRIVES
DVD RW -
DVD 16X DRIVE
CREATIVE SOUNDWORKS SW320 SPEAKERS
BBB 100MBS OPTICAL INTERNET CONNECTION
ANY IDEAS PLS??

*************A NOTE FOR OTHERS: ************************************
*************A MAJOR ANNOYING PROBLEM JUST SOLVED *****************
Found that the problem was that the motherboard needed some jumpers on it to be able to channel the audio to the rear ports (if not using a front audio panel!!!!)
Just to let everyone know download the manual of the motherboard from this site!!!, it will tell u on their
THIS WILL DEFINITELY SOLVE OTHER PEOPLES PROBLEMS!!!!!!!

I have a small problem with MSI GF4 MX 420

Hi,
I have a small problem with MSI G4MX420-T(S+C) ( MS-8878 ). Exactly with nVidia WDM Video Capture (universal), which " can't be turned on " by Windows XP.
I have also new drivers ...
Could someone help me?
Asus A7V333
Athlon 1700+
128 MB RAM
Thanks !!!

If you only have 10 seconds of content in a 15-second composition, then you need to either add more content or shorten your composition.
You can shorten the composition by changing the duration in the composition settings.
Since you're obviously very new to After Effects, I very strongly recommend that you start here to learn After Effects.

MSI Ti4800SE and MSI KT4V motherboard incompatible?

Yesterday I bought an MSI Ti4800SE to replace a GeForce2. It booted up fine and Windows detected it and installed the drivers. However, on rebooting, the monitor went blank and there was a series of beeps.
The computer would not start. I tried taking out all the other cards and tried the video card in 2 other computers but all I got was the beeps. I took the card back and got a refund as they had no more in stock.
Is the video card incompatible with the motherboard for some reason? Did I somehow cause the card to die? Should I buy another or will the same thing happen again?
Any help would be much appreciated.
My system is
MSI KT4V motherboard
Athlon 2500
512Mb Kingston RAM
SB Live
Network card
56k Modem
2 hard drives
DVD ROM
Mitsumi CD writer
350W PSU
Windows 98SE
Thanks in advance

Thanks very much for your advice - looks like I need to spend yet more money then!
But do you think I damaged the card by not supplying enough current, bearing in mind that it booted OK the first time? Or was it not damaged at all?

This one if for the MSI Engineers regarding a FX 5200 (users are welco

First of all, please check this thread here.
Which is the idle temperature of the 5200 core chip?
I got 50°C in 2D.
Is MSI ever going to ditch the Flash interface and give us a better MSI 3D Turbo application?

If you are posting here in hopes that MSI emplyees will read your post then sadly you're wasting your time...
Other than the Survey forum, the forums here are moderated by volunteers like myself who are NOT MSI employees and MSI does NOT read these forums.
If you have questions regarding tech support issues you'll have to call MSI or use their email addy. Both of which I hear are pretty useless right now but the moderators here have brought this issue up with our MSI contact and he informed us that MSI is going to incorporate some sort of new Tech Support service in the near future that actually helps their customer base. When this will actually happen I haven't a clue....
Bonz 8)

MSI KT4V and radeon card compatibility.

hi guys...first of all, sorry about bad english, i'm from germany.
well, the point is, i actually have a MSI KT4V mother board installed in mi pc, and i planed to buy a Radeon 9800 pro graphic card, i have 2 options...buy the BBA (build by ati)..or the sapphire one, i want to know if i will have any trouble of compatibility with both of this cards. Just that, please i'm waiting for your's answers guys

Codegen don't perform as well as you might think. The info I ask for should be on a sticker on the PSU, inside the case. But I'll help you, since I've been there before.
As you see below, there is not much room for a Radeon9800:
"Codegen 400W Pentium 4 ATX Switching Dual Fan Power Supply, Retail Package
Output:400W
+3.3V -> 14A Orange
+5.0V -> 30A Red
+12V -> 12A Yellow
+5VSB -> 2A Purple
-5V -> 0.5A White
-12V -> 0.8A Blue "
The info comes from:
http://www.dealsonic.com/co40pe4atxsw.html

AMD SEMPRON 2400 supperted on MSI KT4V??

AMD SEMPRON 2400 supperted on MSI KT4V??
(i'm italian and i speak a little english!)

Quote
Originally posted by Marcolo
AMD SEMPRON 2400 supperted on MSI KT4V??
(i'm italian and i speak a little english!)
Yes, with BIOS Version 1.B dated 08/09/2004.
KT4V CPU Support Chart

Msi Kt4v-l

Hallo. I have a MSI KT4V-L,Socket A - MS-6712 - 8x AGP- mit Audio - mit LAN , and from bios can't detect the Hdd(IBM, 40 Gb) and my Cd rom.....the option is set on AUTO, but all I can see is NOT INSTAL.....so the MB can't detect my HDD (with is 100% functional, I use the same system as before, but with this new MB).
I'm waiting suggestions.
Tschiuß

...wrong forum...this is for the AMD64 VIA/AMD based board...
...check the jumpers on the drives...using one cable?..set both drives to Cable Select with the optical drive on the middle cable connector and the HDD on the end connector...

MSI KT4V-L don't detect HDD

Hallo. I have a MSI KT4V-L,Socket A - MS-6712 - 8x AGP- mit Audio - mit LAN , and from bios can't detect the Hdd(IBM, 40 Gb) and my Cd rom.....the option is set on AUTO, but all I can see is NOT INSTAL.....so the MB can't detect my HDD (with is 100% functional, I use the same system as before, but with this new MB).
I’ve tried also only with the Hdd, without Cdrom, with the jumper in several position(master, auto detect..)..I've tried IDE 1; IDE2...but no results...I was thinking about a special setup, or a jumper on the MB....or is possible that the MB is unfunctional????
I'm waiting suggestions.
Tschiuß

Just finished a lot of research into the same problem. This is what's up with this. The MB BIOS polls the HDD firmware to make ID and the post continues, but with this MSI MB it wont recognize the HDD, thats because in this case the HDD sucks. I have two IBM DTLA-307045 40GB drives and the firmware for all these drives(and lots of other IBM's) are bad.These links will let you ID and Flash new firmware for the drives.
http://www-1.ibm.com/support/docview.wss?rs=0&uid=psg1MIGR-44195&loc=en_US
http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-39082#IDUtility
BUT your problems will not be completely over. The BIOS for the MB still has trouble recognizing the HDD firmware, remember the firmware for the drive didn't even exist when the BIOs was created. I flashed the BIOS on the MB to the latest revision level and it still don't like those IBM drives, even though the drives with their new firmware are now AOK. I don't think it ever will unless MSI includes the new IBM firmware ID in the BIOS. An older product like this its not likely. If we want any kind of reliability we are going to have to get new drives/MB or both.

Msi Kt4v With Msi Fx 5200 Td 128 Crash

Similar Messages

Maybe you are looking for