MSI KT6 DELTA-FIS2R Bundled stuff

Hi!
I Bougth a MSI KT6 DELTA-FIS2R, and expected some more bundled stuff. Does anyone know whats supposed to be bundled? I need to know if my supplier is ripping me off.
I'm missing the D and S bracket, and some cables( only got 2 sata cables and 2 ide cables, but that doesnt matter much as I got all the cables I need).
Trond

Hi Trond look at the side of your outer box find the white sticker it will list what accessories you should be getting. If you need the brackets you need to yell at MSI well not really you need to contact them by e-mail I wouldn't try phoning them you'll never get through. What MSI doesn't tell you up front is that even though the motherboard is a top of the line expensive sob the accessories are still optional so what you could get is a bundle worthy of the SR or LSR bone stock model. What you should get are the RED rounded cable(s), the SATA cables the power adapters are optional so I hope you can get ahold of some or have a drive with a legacy power plug. My box contained two manuals one for sata one for the board, two floppies, the standard issue MSI driver cd, I/O bracket, cheapo black rounded cable, and the firewire bracket nothin' else when I first opened the box I was looking all over at all the nooks, and cranies for the other stuff, but alas it wasn't there. So long story short to determin what you get you have to look at that white sticker.

Similar Messages

Msi Kt6 Delta Fis2r

I have question about MSI KT6 DELTA Fis2r. Why in CoreCenter I don't have System Temp??? In CoreCenter I can see sys temp, but it's NB temp , and in the place of NB Temp is blank.

Hello!
I had the same kind of readings. System temps and NB temps are pretty much the same thing and I don't think there is one sensor for the NB and one for the system as a whole.
If I'm right, it is probably an installation/software problem. Have you tried reinstalling CoreCenter? Do you have any other monitoring program installed?
Found I do not trust CoreCenter and got rid of it. Can do what I need in BIOS.

Upgrading to MSI KT6 DELTA-FIS2R

I upgrading from my system.
I was wondeing if anyone had any comments or has experanced problems with this combination of these new parts listed along with my older parts?
Any comments and suggestion welcome
Any Overclocking suggestions 8)
I just ordered:
MSI KT6 DELTA-FIS2R
AMD Athlon XP 2500+ (Barton)
Thermaltake A1889 Silent Boost
to upgrade my system.
$257.00 sure seamed a fair price for the power boost I should see :D

Opps.. I didn't change my sig..
I do have a Radeon 9800 128 Meg
Which PSU whould you suggest to get the best OC out of these?
Antec True 480P maybe?

MSI KT6-Delta FIS2R Broadcom doen't accept any driver

I've problem with MSI KT6-Delta FIS2R networkcard Broadcom doen't accept any driver, anyone help me.

I've got the same problem with the 4401 onboard lan of my Kt6 delta lsr.
I ran the dos-diag tool from the broadcom website and it reported an error
in the 3. test.
It reported an invalid mac-address (ff-ff-ff-ff-ff-ff) as well.
I can't get it to work in linux either.
Either the board is damaged or the bios is buggy (v3.4).
I would really appreciate if someone could tell me how to fix this.
Are there different verisons of the kt6?
I've got version 2.0.

Need help from somebody with the "MSI KT6 Delta-FIS2R" motherboard

Hi everybody!
I really need some help from somebody with the MSI KT6 Delta-FIS2R motherboard (the one with onboard LAN, Audio, RAID, S-ATA and IEEE1394 firewire). You see. I've got this board myself but it's been destroyd. Some values for the onboard devices in my board has been overwritten so that windows no longer recognizes the onboard LAN and Audio controller anymore. I really need some help from somebody with this board.
I need to see what the values for the onboard devices should be. I hope someone can help me by sending me a repport from the Everest home edition: http://www.lavalys.com/products/overview.php?pid=1&lang=en
If anyone could do me this favour, I would be VERRY thankfull

Quote from: HYSTERIAH on 12-November-05, 06:24:20
I really need some help from somebody with the MSI KT6 Delta-FIS2R motherboard
HYSTERIAH,
With 76 Replies and 277 Views on your original thread, it looks to me like people have been trying to help you.
So there is no confusion, I am locking this thread so all your help and advice you receive will be in the same place, so people do not need to jump between threads to keep track of what has already been suggested for this mobo of yours.
Richard

MSI KT6 DELTA FIS2R problems

Well, I finally received my new KT6 DELTA FIS2R motherboard (I replaced my K7N2 Delta ILSR). After getting the wrong model and one with missing parts... I think I received a defective one! I tried to format and make a new installation of Win Xp. While it tried to make its first boot, the thing crashed and it would not reboot. I tried resetting the BIOS and then i got the message: CMOS corrupted or damaged. (The diagnostic led indicated the same thing). I experienced another problem, while I was using my computer, the CPU was running at 60C, in windows! (before reinstalling). Does anybody has the same problems with their KT6 boards... Does it need to be returned?
Thanks for the help,
Valkyr

From your post its not totally clear where you are at. Does the system still POST?
First of all, it is normal to get some kind of error message the first time after clearing cmos. Entering bios or hitting the key for "load defaults" will make that go away. If you do that and errors still happen in bios then you have more serious problems.
As far as the temp goes, redo the cpu installation making sure you totally remove all the old thermal pad/compound and use proper amount of new stuff.

MSI KT6 Delta-FIS2R Via KT600

Does anyone own this board? If so, how is it?
I'm currently having problems with my MSI nForce2 board that I just bought, I am debating returning it and getting this KT600 version, do you think that would be worth my hassle? I've heard some mixed reviews on the KT600, some saying it's faster, some slower, but all they it's very stable. My current nForce2 version loses its video from time to time after a restart, also there is some times my mouse dies on my current board. These problem didn't happen with my old board, so it isn't the components.
I just don't know what to do... ;(

Quote
Originally posted by Bas
Hi,
I have not seen any users with the KT600 boards yet.
But as for your nForce problems:
Quote
Athlon XP 2800+ (Barton) 333FSB w/ Tt Volcano 11 HSF ~ 1024MB DDR-PC2100
This doesn't sound right to me, if you are using 166FSB CPU's you MUST use PC-2700 ram (or above).
Give it a shot with a PC-2700 stick and see if it solves your problems.
Nforce2 boards let you run the ram slower then the CPU FSB.
I know the via KT400 had a hard time doing this. Does the KT600 have the same troubles? If I got this board would I have to get new memory anyway? Does the KT600 let me run the memory slower then the FSB?
I had a old Chaintech Nforce2 board, and it had no troubles at all with the problem I mentioned B4.
BioHaz

MSI KT6-Delta FIS2R problem!?

I managed to install al but one aspect of the mobo. The integrated gigabit lan (Broadcom 5788) doesn't seem to be recognized. It looks like the PC just can't find the card, I don't get any 'found new hardware' messages and I can't find the card anywhere in my device manager.
Even when I try to ad a network adaptor manually (through new hardware) I can't seem to find it. (only lets me install a standard microsoft adaptor)
At first I had problems with the USB 2.0 but after service pack for Win Xp professional and a patch the USB 2.0 was installed properly but the drivers don't seem to be the problem in case of the gigabit lan. I have the drivers, I just don't have a way to install them.
Is there another patch I might need for the gigabit lan? Is it something in the bios I didn't see? (don't remember seeing anything in the bios referring to the integrated lan).
Hope you guys can help me.
Greetz

I was wondering if MegaJos was able to fix the problem as I ran to this myself yesterday. The ethernet controller simply doesn't get recognised properly and I'm unable to install the driver. After several failed attempts I did some investigating with a diagnostic utility available the Broadcom web site and it turned out that the controller EEPROM data was/is corrupt. Now I could try rebuilding the data and flashing it, but since this is a brand new board I think I'll just take it back to the shop for a replacement.

Changed from K7N to KT6 Delta-FIS2R

Well, it took some time, but I finally got a motherboard in exange from my K7N2-Delta ILSR. I picked KT6-Delta FIS2R. Since I received that board, I had a few annoying problems. First, The CPU temp was around 60C in windows! Then, when I formatted the hard drive to install XP again, it crashed and would not even restart. I reseted the BIOS and I had a message telling me the CMOS was damaged or corrupted !?! Did anybody had the same problems with this board? Is it just defective and need to be returned ?
Here are my specs:
CPU: AMD XP 3000+
MOBO: MSI KT6 Delta FIS2R
Video: MSI GF FX 5900 TD128 :D
Sound: Onboard sound
Memory: Crucial, 2X512K (Non dual channel)
Operating sys: Windows XP Home
(By the way, is it possible to see the CPU frequency in the AMI Bios? I can only find FSB frequency?)
Thanks for the help,
Valkyr

Quote
The CPU temp was around 60C in windows
Which headsink? Mounted properly and in correct direction?
Quote
I reseted the BIOS
You've done it exactly as described in the documentation (Power off - jumper to 'clear' position - jumper back to normal position - power on)?
Quote
is it possible to see the CPU frequency in the AMI Bios? I can only find FSB frequency
cpu = fsb x 2

KT6 Delta FIS2R BIOS stopped detecting IDE1 & 2 optical drives

I am working on a new system that has developed an unusual (to me) problem. The system is partially built and consists to date of the following:
1. Chieftec MA-01BND case with Super-Flower TTGI TT-520SS (520 Watt) power supply.
2. MSI KT6 Delta FIS2R motherboard with an AMD XP2600 CPU and one stick of Corsair CMX512-2700C2 RAM.
3. Two Mitsumi MTM-1.44BL floppy drives.
4. Two Maxtor 6Y080MO HDD’s connected to SATA 1 and SATA 2, not in RAID.
5. Sony DDU1621BK DVD/CD ROM mastered on IDE1.
6. Sony DWU10A-B2 DVD/CD RW 1 mastered on IDE2.
7. Asus V9520 VS AGP video card.
8. Windows 98SE installed on HDD1.
Everything was operating properly, and I was installing software and drivers for peripherals, when the following problem appeared.
At boot-up, the MB logo pops right up; but then, it takes approximately 80 seconds for the BIOS to initiate. Boot-up then proceeds as normally, and Windows 98SE initiates normally. However, neither optical drive appears in Program Manager; and, pushing the “open” button on either drive fails to open the tray.
After the BIOS initiates, the usual message directing one to press the “DEL” key for access to BIOS Setup never appears. However, if the “DEL” key is held down anyway, the system will enter Setup. Note that there is also a delay of approximately 80 seconds for this to initiate.
Once into Setup, the “Standard CMOS Features” page indicates no IDE devices. Resetting the detections to “Auto” across the board makes no difference. Resetting the CMOS via the “Clear CMOS Jumper” and via removing the CMOS battery changes nothing except that the CMOS returns to the default settings, and the BIOS still fails to detect the optical drives.
Since SATA1 and SATA2 are detected and operating, I believe that the chipset is OK because they are served by the same Drive Station on the chipset as IDE1 and IDE2 which aren’t detected and operating. I also consider damage to the motherboard itself to be an unlikely cause because that can’t account for all of the systems, either. I suspect the BIOS because of the following:
1. The BIOS is so slow to initiate, as is the entrance into setup.
2. The direction to press the “DEL” key for access to BIOS Setup never appears.
3. The BIOS has stopped detecting the drives on IDE1 and IDE2.
4. All of these functions that take place prior to chipset initiation.
Does anyone know what happened and what needs to be done to return the BIOS to normal operation? Or, is this a board failure, after all?

Quote
Originally posted by Fredrik Åsenius
Sorry, I didn't think of the SATA when I read your specs.
Easy to do with all that info.
Quote
OK, what is BIOS eventually booting from? Is your SATA working?
What appears to be happenning is that the BIOS times out while trying to detect the IDE's (in this case, optical drives) and then just goes ahead and boots. The SATA's are working fine, as is Windows, once I wait out the time out for the BIOS. Except, of course, Windows also can't see and doesn't indicate in Program Manager the opticals that the BIOS couldn't find, which makes sense. The odd thing in this scenario is that, once the BIOS times out and goes on, it does not provide the customary message to hit "DEL" to enter Setup (but holding down "DEL" when the BIOS procedes will take me to Setup anyway!
I talked to eSupport today, and the techie says it's a BIOS problem that their update will resolve. Well, of course it WILL; they sell updates (duhhh). Being the trusting soul I am, I'd like some independent confirmation. I've posted this on 4 forums hoping to catch someone who has seen this happen before, in addition to contacting eSupport (Amibios's update shop) and MSI Support.
MSI's Support Department is, of course, silent, as usual.

MSI KT6 Delta and Auto update page problem

Hi, I have been lookin for the right forum to post this on for awhile heh but I have an MSI KT6 Delta FIS2R which has an auto update feature that uses an icon on ur desktop called MSI Live Update. This utility has been working for quite some time now but all of a sudden i get an error message in quote
"Microsoft JET Database Engine error '80040e09'
Cannot update. Database or object is read-only.
/autobios/VerChk/XSeries.asp, line 105"
I have been on a few sites including microsofts to try and figure out the problem but i get nothing concrete or at least anything i can understand, so I hope someone out here does and if so please help me! thank u

okay well I did that but does not seem to be working... also after just reading FAQ i noticed that the live update service is being updated which coul dbe causing the problem as well, but i dont know how accurate the date is on that I mean it is a FAQ. So.. is anyone else with this board having the same problem right now?

SUPER TROUBLES!!!!! - KT6 Delta FIS2R

Greetings,
Man am I pissed!!! The saga starts here…….
I decided to upgrade one of my servers, looking on MSI’s page, I see this new KT6 Delta – FISR2 and yea I fell in love, just had to have it…..
I placed my order with an online retailer for basically a complete package. (Details below).
MB: KT6 Delta – FIS2R
CPU: AMD XP 2500+ (1.86 GHz / 512 KB L2 Cache / 333 MHz FSB)
Ram: Kingston 512 MB 333MHz DDR PC2700 DIMM CL 2.5 (KVR333X64C25/512)
Drives: (2) Seagate Barracuda 120GB Serial ATA 7200RPM 8MB Buffer
I paid for FedEx 2 day air, which should have arrived on Thursday. Good thing I checked FedEx Online Tracking Thursday evening since no package showed up. Telephoned FedEx, and the lady read me the “details” on the tracking number posted by the driver from earlier in the day. The driver stated, “He couldn’t find the house number, only Dr. Offices”. Off to the FedEx station I go to pick up my package of new parts, and to chew the ass of the station manager…..
Friday I didn’t have a chance to fiddle with anything, so I put that off until today (Saturday).
Yippie it’s now Saturday morning, I can play with my new hardware! (Hell I even got up early for this)… ;P
I took down my file server, and proceed to remove the MB and the remaining guts so I can install these new parts. Upon opening the KT6 Delta FIS2R box, I noticed there aren’t any Serial ATA power connectors for the drives, so off to the local computer store I go. (The MB did come with two SATA drive cables).
Now back home, I can really get a start on this new box. Installed the MB, CPU / Fan, and Ram….but wait….my AGP video card won’t fit in the AGP socket… They changed the damn socket… Oh well, off to the local computer parts store again for a new video card. I snagged the PNY Technologies Verto GeForce FX 5200 AGP – 128 MB DDR, now heading back to the house…..
Once home, I slam in the new GeForce, and continue to hook up everything else (case led’s, speaker, etc….you know the drill, usual case crap). Whew assembly is complete; I can now power this new hog up!!!!
Flipped the power switch, you could hear the “whirl” of all the fans I have installed, boy am excited!!!! Ummm wait a minute…. Nothing, nodda, zero, zilch, nothing…. Monitor is blank; drives are not turning (usual chit / chat clatter). Houston we have a problem!
Ok maybe I did make a mistake in hooking up this new contraption, but I seriously doubt it. Now before some start to flame, just let me clarify that I have been building machines for 14 years now. I double, triple, and quadrupled checked everything, and still the damn box won’t even give the slightest hint of booting. So I figured I’d look around on the MSI forums for some hints etc. Maybe someone else has had this problem before.
Upon searching I find that most people think it’s a power supply problem when one of these new fangled boards won’t even flicker. Ok just to eliminate that, off the local parts store for a new power supply. I picked up a KWI KingWin 450 Watt jobby-do with 3 fans built in. I wanted an “Antec” but they didn’t stock them…. Oh well….
Back home again now for the 3rd time, I install this new power supply, with all of my fingers crossed, praying this is the problem…. Muddled a little something under my breath, and pushed the power button…….. Same thing, nodda, zilch, zero…..
Ok now something I received must be DOA. First let’s rule out the CPU and RAM. I removed the AMD XP 1700+ and 512 MB PC2100 ram from my workstation machine, and installed them into this new KT6 Delta FIS2R, just to see if it’s any of those two parts. Remember I just want to see if this new setup will just get to the bios.
Smashed the power button and nothing….. I’m getting more pissed with each and every moment now, as you can probably tell. Ok it’s probably not the CPU & Ram, so let’s put them back in my workstation. Ok done, now fire up the workstation….. Nothing!!!
This workstation has a MSI KT7266 Pro2 MB in it, so I figured I’d check the D-Bracket on the back panel….. Four Red LED’s, (processor is not installed properly or DAMAGED). Well crap I know it’s installed properly, so I’m guessing the new KT6 Delta FISR2 MB smoked that CPU when I swapped them out. So now my workstation is down also….. Can you just imaging how pissed I am now?????
Reinstalled the new AMD XP 2500+ CPU and Kingston Memory back into this new piece of crap KT6 Delta FIS2R, powered her up and looked at the D-Bracket LED’s. Now everything is dead!!! Nothing….Even the damn fans won’t even power up, I mean nothing is powered up anymore. Ok let’s try this, to see if the new XP 2500 CPU and RAM is ok.... I installed the XP2500+ and 512 ram into my Workstation to read the D-Bracket LED’s. It shows the same as above (processor not installed properly or damaged).
So now I have to purchase a new processor for my workstation machine, in order to get that back up and running. Then on Monday, I have to contact this online retailer I purchased all this stuff from, to see if they will swap out the MB, CPU, and Ram.
Man I’m pissed!!!! Maybe this is a fluke, DOA board???? I seriously hope MSI’s quality isn’t going down the beaten path….
All for now…..
Jeff

Hi Guys,
Thanks again for lending a helping hand once again...
ASSAF:
Yea I tried that also, still nothing….. CPU+Cooler+RAM+VGA I even went down as far as only the CPU+Cooler+Ram, while watching the D-Bracket to see if there was any instance of life in this thing……Nodda…
BAS:
Yes I made sure the Cooler was installed correctly, and yes re-greased when it was installed. I also unplugged & re-plugged in the power connectors, thinking that “might” do it….. Still nothing… Even tried two other Power Supplies….. Nodda….
Tomorrow (Monday) the retailer and I will have a little telephone chat, in order to get my RMA number. I’m hoping this isn’t going to be a problem in swapping out the components, but until I see some action, I’m not going to hold my breath. As for now, I’m guessing this is going to be a hassle…. Time will tell!
Thanks Again,
Jeff

AGGHHH KT6 Delta FIS2R

Hi!
I am doing something wrong here, of that I am sure!! I have:
KT6 Delta FIS2R
AMD Barton XP2500+ 333 clocked at 166 x 12
Apacer 512 PC2700
40 GB Maxtor
450 Antec smart power
Gigabyte Vivo 128 video
Creative soundblaster Live
Sony CRX160E cdrw
Antec case
7 case fans
Windows 2K updated
Pc Cillin and Zone Alarm
temps are running cpu 54 C running steady regardless of stress
system temp is 40 to 45 regardless of stress
Voltages
Vcore 1.63
3.23
4.87
11.46
Problem is:
the Lan keeps dropping me off after a few minutes, and I have to reboot to reconnect. The network still says I am connected, but I'm not
Also, I keep getting memory dumps, I realize I probably need to change the memory, but was wondering if it could be something else
Thanks
I really like this board, now if I could just get it situated correctly.

Yeah i got the EXACT same problem..
LAN drops out if i either A) Copy files from my fileserver. or B) Use a program til Bittorrent to download something.
It does NOT drop me if i use the standard EI download.. at least it hasnt done so yet. this is just wierd imo.
Any help , fix for this would be great as i have to reboot like once every hr..
My syst: (as i can remember it)
AMX XP BARTON 2500+ (FSB @ 200)
1GB PC3200 DDR RAM
GAINWARD GF4 Ti4200 GOLDEN SAMPE in Enhanced mode (small OC)
CREATIVE AUDIGY SOUNDCARD
msi burner, a couple of disks and stuff.. guess it doesnt matter

KT6 Delta FIS2R - Missing Parts?

ok, i recently bought a KT4 ultra to upgrade an old PC (was the KT4 FISR) and it came with heaps of accessories like serial ata cables, firewire bracket, sound bracket (s braket), and the D LED bracket (the one with the LED's and the USB ports...
now to my question, i bought a KT6 Delta FIS2R today and it had the firewire bracket only oh and the standard IDE cables. ?( is this normal or should i be getting all the other accesories?
i rang the store and they said they didnt know we cant do much (jee thanks!),.. so i dunno what im missing or if thats what im supposed to get!
so can someone tell me the full story?!
Xp3nd4bl

I too was upset over the missing things I had the exact same bundle firewire bracket, and the cheapo round cable(not the red booted kind) . The problem well really isn't a problem MSI doesn't do bundles like other motherboard makers even if they were to put the deluxe moniker on the name it wouldn't change anything. The fancy cables, and brackets, and fans are all optional my friend yes you payed for a top of the heap motherboard board, but you don't get top of the heap bundles with them. To check your real bundle look on the cardboard sleeve that hugs the motherboard box find the white sticker that lists what you got. I don't exactly agree with that policy, but you can call or e-mail MSI, and ask very nicely for whatever bundle items you should have recieved.

KT6 Delta FIS2R Why Oh Why?

I am confused. The KT6 Delta FIS2R mobo just won ANOTHER award and MSI is pulling it out of the market. Does this make any kind of sense?
I just bought a second one to build another system, and am looking forward to it. The one I have now is great. It took alot of hunting to find it as these boards are rarer than hens teeth. I must have gotten the last one, cause the site I bought it from doesn't have it anymore. And when I did get it, it is missing the D-Led. The motherboard is still sealed in it's original package, but no D-LED......
Yes, I know about the LSR and about the KT6v, but they didn't win any awards, now did they???
Sorry, I am just pissey when my world changes the way I don't want it too....LOL
Mom

Quote
Originally posted by MomHerrmann
I am confused. The KT6 Delta FIS2R mobo just won ANOTHER award and MSI is pulling it out of the market. Does this make any kind of sense?
Oh, Foxmulder, check the ATI site for updated drivers, that might help you...
Yes Mom, have sense ... the mobo is a bad product , and the awards... well..... I don't want to talk about that (cause I have no manners )
about the drivers.. read my specs, that's why i want back to my old and lovely K7N2 delta
Bas if you like this crap (ooops! I did it again ) i sell mine!
Sorry by my manners guys
and i'm not the only one having troubles with this mobo just search on the forum

MSI KT6 DELTA-FIS2R Bundled stuff

Similar Messages

Maybe you are looking for