MSI KT6-DELTA power Goes up but nothing happen after ...

I have An Msi KT6-DELTA board with an Athlon XP 2000+ processor , SAMSUMG 512 MB DDR 400 , GeForce 3 64 MB DDR , 300 Watt power supply + Volcano 9 fan .
The power light goes on when I start the comp and fans are starting but nothing else happen nothing on screen  ;( . I check the D-Bracket to know what was the trouble by the four light on it , All light are RED saying that the processor is damaged or not installed properly . I try 3 processor on it , all processor was Ok so what's going on?
Are you thinking that my board is damaged? ?(

Hi,
I am running an KT600 LSR and I am having the same troubles. I push the button to start the computer and the fans come on.Nothing else happens until I press the reset button, then it starts normally. However it does search for a raid device every time it boots, None are connected so is there a way to make it stop searching? It sometimes hangs on that screen for 10 to 15 seconds.
Thanks,
Tj
My system is
XP 2200
Kt 600 LSR main board
512 mb pc 2100
wd 100 gb (boot drive)
maxtor 120 gb
lite on 52x12x52
dvd drive
sound blaster audigy gamer
ati 9000 pro 128 mb ddr

Similar Messages

  • Home screen is completely frozen on my Apple TV.  I tried to reset and the light blinks but nothing happens after that.  Any suggestions?

    I tried to reset and the light blinks but nothing happens after that.  It won't allow me to move the cursor on the home screen.  Any suggestions?

    Unplug the device from power and plug it back in.
    If it still fails to respond properly, connect it to a computer via microUSB and restore via iTunes.

  • HT4946 after i reset, all i see is connect to iTunes, but nothing happens after i do.

    after i reset, all i see is connect to iTunes, but nothing happens after i do.

    This should help:
    iOS: Unable to update or restore

  • HT201401 my iPhone 4s  fails to turn on. When I press the sleep button the apple logo shows displays but nothing happens after that

    iphone fails to turn on. The apple logo shows up but nothing happens after that

    Hi Haleynichole_99!
    I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Satellite P300 - power lights on, but nothing happens on screen

    Hello,
    I have a Toshiba Satellite P300-1F0, yesterday it was working fine, I turn it off without nothing extraordinary happens.
    Although later when I wanted to turn it on I pressed the power button but the screen wasnt working, I tried to connect an external screen but nothing was shown on it, although the power lights were on, the cd reader opened and closed like normally does, and I could hear the fans working.
    Than I realise the windows 7 welcome sounds weren't playing even after some minutes with the laptop turned on, and that the mouse laser only worked for some seconds before it turns off.
    This was when I started to belive that it wasnt a screen problem but something else.
    I read some forums, and I tried to disconnect the power cable, take out the battery, pressing the power button for 60sec and turn it on, and it worked, everything was working fine, I used the computer for some hours without any issue.
    Today the same problem occured, and I tried to fix it the same way I did yesterday, holding the power button for 60 sec, but this time it didnt work. I retried this for 3 to 5 times and nothing.
    After some hours letting the computer turned off, resting, I retried the process and now it worked.
    Now I'm afraid to turn off the laptop, because to turn it on I need a lot of pacience and time.
    What could be the problem, and how I solve it?
    Can you help me?
    cumpliments,
    Adriano

    >I read some forums, and I tried to disconnect the power cable, take out the battery, pressing the power button for 60sec and turn it on, and it worked, everything was working fine, I used the computer for some hours without any issue.
    Yey, sometimes this workaround is helpful to bring the unit back the life.
    > What could be the problem, and how I solve it?
    Its difficult to say what cause this. The Satellite P300 is an old notebook model therefore it could be possible that one of the hardware parts starts to malfunction.
    It would be interesting to know if usage of different RAM modules would change the notebook functionality. If you have some spare compatible RAM modules you could test it.
    In worst case it could be possible that notebook motherboard start to malfunction.
    This would be the worst case I hope for you that its not mobo related issue.
    PS: check if your BIOS is up to date. In case its not the latest version, try to update the BIOS.

  • HT1657 I am unable to play movie, I touch play, the screen goes black but nothing happens???

    unable to get movie to start??

    I have more or less the same problem - except I've been able to get it to play (once or twice) by starting it with the miniplayer instead of the main screen (huh? exactly) -- but I paused the movie and now I can't get it to start again.
    Super annoying. Plus, it's interesting to me that the "help" page linked from the itunes store has no links to anything that might indicate that there might be a "problem"

  • My ipod is black and i have tried holding down power and menu but nothing happens. what should i do?

    the problem has been going on for a few days now and today i tried turning the ipod on and the apple sign flashed for a few seconds before shutting off again.
    thanks for any help!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Toshiba 40TL900A - power led on but nothing happening

    Hi,
    I have an 18month old Toshiba 40TL900A, am awaiting a service callout in a few days, my problem is that it has just seemed to shut down/locked out. I have the green led light on in the front and it wont do anything else, even after unplugging it for a few hours, when plugged back in the green light comes on automatically rather than the red led light first..
    Anyone got any ideas please

    >Anyone got any ideas please
    As far as I know with TVs there is no much options you can do. Either it works or not.
    All you can try is to use power button on remote controller or TV directly and see if you can switch it ON or OFF.
    In my opinion you need professional help with this.

  • I have a Mac Desktop that is running OS 10.10.1, I am trying to upgrade my iPhoto to 9.6, but nothing happens after the perceived download.  I even retarted and still my iPhoto is in not available, why?

    My iMac = Desktop 20", 2GHz processor, 4 GB memory, running OS 10.10.1
    I am tring to upgrade my iPhoto and when I follow Apple's instructions on how to do so, the download seems to occur, I click on the upgrade package and nothing changes.
    I have restarted the computer after the download and still no change.
    What am I missing?

    leonie,
    Thanks for the reply, I finally got it solved.  I had to find the upgrade in the Utilities folder of the Finder...

  • When I shut down/logout finder quits but nothing happens after.

    Hi everyone. I've been having this problem for a little while now but only have seemed to notice it in the past few days (I keep my laptop on sleep most of the time). Everytime I have logged out/ shut down the same thing happens: The menubar at the top disappears and so does all the icons on the desktop but the wallpaper stays, and you can still bring up applications from the dock.

    I've been having this problem for a little while now but only have seemed to notice it in the past few days
    Then how do you know if you've had this problem for a little while?
    Try the following:  HOME>Library>Preferences.  Trash the Finder plist file, repair permissions and restart your comp.  Empty the trash. 
    If the problem continues, do the following:
    Disconnect all devices from the computer then do the following:
    Boot up from your Snow Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
    If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.

  • I tried to install v7 and it's stuck in installation where it says need to reboot to continue but nothing happens after reboot

    Every time I reboot and start Firefox v7 it tells me that I need to reboot to continue. I'm using Vista. I can't get out of this reboot window even after restarting the system. I tried to remove the program to re install it but I can't do that either. I removed Zone Alarm and Adobe Reader and that didn't help either.

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup - Gray Screen
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens.  Can't slide the power off either.  It tells you the time, unlock button, power off button but nothing

    I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens.  Can't slide the power off either.  It tells you the time, unlock button, power off button but nothing happens.  Voice just tells you the unlock button, time, poweroff button.
    Please help also itunes says I need to enter on iPod the passcode to reset to factory.  I can't get it open to enter passcode, slider doesn't work.  It is one day old and this happen xmas afternoon.  PLEASE Help someone

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • MSI KT6 Delta-L sound problems

    Hi, I have an annoying problem. My sound gets disorted and after one or two seconds I get a Blue Screen..
    This only seems to happend with Operation Flashpoint Resistance and Lock On Air Combat (both uses a lot of memory). Computer is rock stabile unless this.
    I have tried both Win2k/XP and flashing my BIOS to the most rescent one, as well as the drivers.. I have also tried without the PCI-cards, and disabled some features at the motherboard, but with no help.
    But when I used Via AC97 drivers instead of C-Media, it crash no more (aswell as no sound drivers at all), but I have no surround sound (I suppose that driver don't support my sound chip fully)...
    Ok, know to my specs,
    AMD XP 2500+ Barton 512 kb cache
    MSI KT6 Delta-L
    2 x 512 MB Twinmos Twister CAS2 400 MHz
    Powercolor ATI Radeon 9800 Pro 128 MB
    Q-Tec 450W Gold
    Avermedia DVB-T Digital-TV-card
    Promise UltraTX2-100
    And some harddrives

    :biggthumbsup:First off see if your ram is compatible Here then what is your power supply AMP'S like?
    as well we can try this Page to get a stable start
    see how that goes,
    post back

  • MSI KT6 Delta LSR SATA to PATA High CPU Usage Problem

    Well recently I've switch to my one of my other motherboards on my network to a MSI KT6 Delta LSR, it was working fine after a reformat, but I notice a few problems and that is 100% cpu usage for SATA to PATA, and vice versa, which seems really crazy. Then my network card performance is ISDN speed sluggish, and I tested my line to be working 100% with another mobo. But when I put another NIC on the same mobo it suffers the same speed problems.
    Any suggestions? The rig is specs:
    Barton 2500+
    Antec QuietPower 350W
    200GB Seagate SATA HDD
    40GB Seagate PATA HDD
    ATI Radeon 7500 AIW
    Audigy 2 Value
    Realtek 8139 NIC
    MSI KT6 Delta LSR Mobo
    2x512 MB PC 2700 RAM
    Pioneer 107D DVD Writer
    LG 16X DVD-ROM
    56K Modem (A-open)

    Shouldn't say what I don't know about SATA, but since I found below, I need ask if VIA 4in1 drivers are installed, preferably while in SafeMode I say:
    http://www.google.se/search?q=cache:X6ewgPiIHYcJ:www.qdi.nl/cgi-bin/bbs/YaBB.pl%3Fboard%3DP4I865%3Baction%3Ddisplay%3Bnum%3D1074174096+sata+to+pata+cpu+usage&hl=sv
    I recently installed 160g Seagate barracuda 7200.7 drive on SATA port. (I enabled the Bios using Auto) I have a P4I865pea-6al mother board, with two PATA drives . When copying files between the PATA drives on ide ports, to or from, the SATA drive, I notice the CPU usage goes up to 100%, but when copying files from one ide drive (the PATA drives) to another the CPU usage is very low.  
    Is there a bios setting that will allow me to copy files from the SATA drive to the Pata drives using a small amount of CPU power, found when just copying between the Primary and Secondary IDE drives? I am using Adobe premiere pro, which uses a lot of CPU power, and the high CPU usage of the SATA drive crashes this program? Any help would be appreciated
     Re: CPU usage with SATA drive?
    « Reply #1 on: Oct 30th, 2004, 7:17pm »  Quote  Modify  
    have you installed the newest chipset- and ide drivers ?

  • MSI KT6 Delta wont boot

    My MSI KT6 Delta system no longer boots any further than the memory test? why? any ideas? any solutions other than replacing the motherboard etc.
    some background:
    motherboard: MSI KT6 Delta
    CPU: AMD Athlon XP 2800
    Memory: 1Gb branded
    Graphics: Geforce FX 5200 AGP
    PSU: Antec TrueBlue 480
    Screen displays the memory test then a message relating to BIOS setup i.e. "Del: BIOS Setup" plus a new option i dont remember seeing previously namely "F10: Flash recovery" btw pressing 'del' doesn't help you cant get into the BIOS setup.  Having cleared the CMOS via JBAT1 i now just get the MSI Welcome screen.  If it helps the D-Bracket displays a red led top left.
    its all a bit odd really, everything was fine on Friday night, but come Saturday morning its all gone pear shaped.
    any help appreciate

    OK. Well, the procesor is where I'd start troubleshooting.
    Step one would be to unplug power cable and other cables on the back of the computer, wait a while ( you'll hear a faint zzipp  ), and then move JBAT jumper in order to clear CMOS. That will force you into BIOS.
    Eh, thought of something. BIOS will stop sometimes if it can't find a keyboard. And you say entering BIOS is impossible. Perhaps you have more than one problem? a) processor's BIOS settings are impossible, b) the keyboard hinders you from entering BIOS. However, the CMOS clearing should in either case be a good start.
    Your problem very much reminds of what happened to me and others while playing with CoreCenter. I know you didn't but can't help saying so.

Maybe you are looking for