MSI Lightning GTX 680 SLI issue

I have search and noticed someone had a similar issue but they had to remove their sound card to solve their issue. Unfortunately I don't have a sound card to remove.
Motherboard Z77-UP5-TH
i7-3770k (not OC)
32 GB Ram
1000w PSU
I have 2 MSI GTX 680 Ligtning's that I am trying to SLI. Both show up in Device manager and show in Nivida control panel but NO option to SLI the cards (See image below)
Let me start off with a bit cause I have tried alot and reverting to different fourms now.
Here is what I have done:
-Installed current, beta, and old drivers (fresh installs with driver sweeper)
-Tried 4 different SLI cables
-Plugged in Sata Power to the ATX4P slot on the Mother board
-Installed each card individually into each slot to see if they work (They do as single cards)
-Used a friends MSI GTX 680 lightning edition to try and SLI (still did not work)
-Did a CMOS reset
-Updated mobo Bios to F11
-Updated mobo Bios to 12e Beta
-Updated the GPU cards to the same current Bios (80.04.47.00.18)
-Installed one card, rebooted, shutdown, installed 2nd card, rebooted (still nothing)
-installed both at the same time ( nothing)
-installed one monitor to one card (top and bottom)
-installed 2 monitors (2 to 1 and 1 to 1)
-tried both cards on an ASRock Extreme 7 Gen 3 board
-reseated the reactors on both cards
-Set my BIOS to legacy
-disabled Internal graphics on my BIOS
-Set display to PEG
-Forced PCI GEN 3
-Forced PCI GEN 2
The only thing I can think of is that PCI-E slots are not running correctly (see GPUZ BUS INTERFACE) One is running at 8x and the other is running at 4x.
Bad board?
Pics below are GPU Z of both cards and a picture of NVIDIA control panel.

Quote from: flobelix on 14-March-13, 04:22:02
Click on the question mark next to bus Interface to check if cards are really running at X8/x8
Quote from: kromosto on 13-March-13, 18:00:14
you said both cards work single in each slot but do they run at correct pci-ex configuration 16x or 8x ?
All of these test were done today with the latest GPUz and running their render test.

Similar Messages

MSI GeForce GTX 780 SLI question.

Hi,
I wonder if my MSI GeForce GTX 780 Gaming OC is compatible with the MSI GeForce GTX 780 Lightning LE in SLI?
Thanks!
BR, Tobias

as long as both cards are using the same GPU (GTX 780 GK110) and they both have the same amount of VRAM (EG: 3GB+3GB) then they will be able to be used in SLI as long as your PSU can power both of them!
you can use SLI even with different manufacturers cards so long as its the same spec (GPU) as the other and the VRAM frame buffers match each other as both need the same amount!

Crash after going idle - MSI Afterburner / GTX 970 SLI

Greetings,
I love my new MSI GTX 970 Gaming Cards -- they work awesomely
However, I have a problem where if I'm running MSI Afterburner at all (i.e. load it, but don't do any overclocking), I receive a black screen and reboot 5-45 seconds after exiting any 3D application. The applications all run fine, the crash does not occur if Afterburner is not open. I've received the crash after Furmark, Elite Dangerous, Heaven Benchmark, Star Citizen, etc.. The idle crash NEVER happens so long as Afterburner isn't running..
I've used drivercleaner to clean out all old drivers, I've uninstalled MSI afterburner and reinstalled (and cleaned directories/registry inbetween).
Any suggestions/ideas?
Update - the crash does NOT occur if i'm running with SLI disabled.
John

Sorry and thanks for the guide - I wont' be lazy next time
Geforce 344.16 driver
Afterburner 4.0.0 (is there a beta that 'officially' supports GTX 970? - I didn't see it in the changelog)
MSI Gaming app installed or uninstalled (tried both) - latest version from MSI website
Rest of stats -
ASUS P8P67 Pro - 3602 (latest BIOS I could find)
VGA: MSI Gaming GTX 970 in SLI
PSU: Corsair HX 950
Intel Core i7-2600k S/B oc'd to 4.6 Ghz
Mem: 2x8GB DDR3-1600 (stock speed/settings/voltage)
Crucial MX100 512GB
Cooler: Original Koolance EXOS for the CPU
Windows 7 64-bit
Quote from: Nichrome on 04-October-14, 23:10:14
Hello,
We need a bit more info >>Posting Guide<<
Also if you could state versions of Afterburner, MSI Gaming App (if you use it) and of Nvidia driver.

MSI Lightning GTX 580 delayed crashing

I have a weird problem here. I have a MSI GTX 580 Lightning 1.5GB that will crash after a few days of the PC being up and running. Let me try to explain the situation.
Cold boot. games play fine. no problems.
I always leave my PC on. Idle's all night and while I'm at work.
Come home, do general work.
Idle's for another day or two.
Sit down a few days later to find any game crashes after a few minutes.
Power down. Cold boot. games play fine for hours.
I have:
Asus P8P68 Pro
Intel Core i7 2600K
8GB (2x2GB) G.SKILL DDR3-1866 Ram
OCZ Vertex 2 120GB SSD
Corsair HX850 Power Supply
This happens no matter if CPU and GPU are running at stock speeds. Tried several Nvidia drivers. It's been going on a while. I just upgraded from 275.xx to 285.62. I also never had any issues with CFX 6950's in this system.
Any ideas? Thanks!

Quote from: compudaze on 05-November-11, 10:16:32
I honestly haven't tried reference 580 clocks. Only the stock clocks of the Lightning. But I don't see how that would affect anything. I can play for several hours without a crash. Then come back a few days later and it will crash within minutes. Cold boot, I can play for hours again.
I can still give it a try though.
then it colubd be anything
try reseat the VGA into the PCI-e slot or try it in another PCI-E slot

MSI P67A-G45 (B3) SLI issue.

My friend recently purchased a second GTX 460 SE to use in SLI. I installed it in his computer today and could not get SLI to function. Operating system is windows 7. I flashed the bios with the latest version as well as installed the latest drivers for the motherboard. Tried reseating the graphics cards and the SLI bridge multiple times. Tried uninstalling and reinstalling the Nvidia drivers multiple times, each time using driver sweeper after the uninstall. I have read that this board does support SLI if you have all the drivers updated. Anyone have any ideas?
Edit: Forgot to add that both the cards do work. I can switch the monitor between them and they work fine. The nvidia control pannel and device manager show 2 cards but not in SLI.

Intel Core i3-2100 Sandy Bridge 3.1GHz
MSI P67A-G45 (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard (The bios version was the latest version from live update cant tell you exact version as im not at his house)
G.SKILL Ripjaws X Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-4GBXL
EVGA 01G-P3-1366-TR GeForce GTX 460 SE (Fermi) 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
Western Digital Caviar Blue WD3200AAJS 320GB 7200 RPM 8MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive
TRENDnet TEW-623PI Wireless N Adapter IEEE 802.11b/g/n 32-Bit PCI Rev. 2.1/2.2/2.3 Up to 300Mbps Wireless Data Rates 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
Windows 7 Professional 64 bit
Rosewill Xtreme Series RX850-S-B 850W Continuous @40°C ,80 PLUS Certified, ATX12V v2.2 & EPS12V v2.91, SLI Ready CrossFire Ready, Active PFC "Compatible with Core i7, i5" Power Supply

MSI GTX 680 Lightning - No Signal/100% Fans

Hi, I recently built a computer, which contains an MSI GTX 680 Lightning. This is the first time I've built a computer so don't kill me if this has a simple solution.
The computer ran fine for a few months, then all the sudden I started getting a recurring issue where both my moniters show "No signal" and the 680's fans turn up to 100%, it stays like that and I have to reset the computer, after which it seems to run fine for a while and then it happens again unexpectedly.
The issue seems to happen more frequently when I'm playing games, but it also happens when I'm not even at the computer. Also, I haven't updated any drivers or anything recently so I don't think it would be that. This is pretty annoying, so any help would be appreciated.
~Thanks.

can you list full system specifications? read >>Posting Guide<<

Need manual for MSI GTX 680 Lightning

I recently purchased a MSI GTX 680 Lightning card, but the cd that came along was faulty, I cant open the pdf manual. I have contacted the shop I purchased the card from but they cannot get another cd for me. From where can I download the manual?
Great card btw, I just want to read more about the card details.
/Peter

as flobelix said vga manuals doesn't have much.
but you can use nvidias official pages for the more information.
http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-680

MSI GTX 680 Lightning compatibility with Windows 64/ Asus P6T Deluxe MB

I purchased a GTX 680 Lightning on Dec. 16. I've been having random PC lockups and Driver hangs/restarts. Here's what I have done so far to try and remedy the problem:
-started with MSI Afterburner version 2.2.5 BETA and Nvidia ( MSI provided ) drivers 301.42, and standard bios .
-upgraded to various newer versions of NVidia drivers, BETA and WHQL. Usually the newer drivers become even more unstable.
-Upgraded to Afterburner 2.3
-I had the original bios versions first shipped with the card, I have since updated the BIOS:
from 80.04.09.00.F7 --> 80.04.28.00.39
from 80.04.09.00.F8 --> 80.04.28.00.3A ( LN2 )
-NVidia control panel settings left at default, with Global/all profiles set to "prefer maximum performance".
-I originally had a GTX295 installed, so all drivers etc. were fully removed, followed by clean install of 301.40
-Afterburner 2.3.0 is installed, Core voltage is set to +12mv, and the power limit is set to 178%
-memtest run for hours on my memory, zero faults.
-furmark run for hours, no crashes
-3dmark run repeatedly with varying overclock settings in Afterburner, no crashes
The updated LN2 BIOS seems to be sllightly more stable, but I still see random crashes when running Windows media player, VLC Player, Internet Explorer. Its definately a problem between windows multimedia and the Nvidia drivers. I can play Skyrim maxxed out, for hours, yet when I first login to the computer and run IE, it sometimes locks up.
I've had the driver stop and recover while Afterburner is monitoring on-screen, and sometimes the CPU load will spike to 100% at the crash, yet sometimes it does not. GPU power voltage always sits at 0.987 or 1.212V. matching the power spec expected for the LN2 BIOS.
I've had GPU-Z cause at least 1 lockup, with the screen blanking red. Only 1.
My next step will be to try updated drivers again, now that the bios has been updated. I may also downgrade Afterburner to 2.2.5 BETA.
Does anyone have any other recommendations I can try? Can someone point me to the latest BIOS version for the card ( or can i try that hybrid BIOS now available? )
At what point do I give up and RMA the card?
Card S/N is 602-V283-02SB1206030939
Windows 7 Professional 64
Corsair 12GB mem, matched sticks
69 GB SSD for the OS, a Raptor 320GB disk for the rest
Antec True Power Quattro 1000W power supply
Asus P6T Deluxe MB ( not v2 )
Intel I7 cpu 2.93 Ghz

I'm going on 3 days of stable performance. I made 2 changes:
1) core voltage in MSI afterburner upped to +87mV, power limit at 150%.
2) I have an ASUS P6T Deluxe motherboard, and am running the UPU-6 engine. This utility is designed to let the motherboard auto-switch from max power savings -> medium power savings -> max performance ( 100% CPU ) -> turbo mode (O/C CPU ). I had this set on Auto, and I have re-set it manually to max-performance.
I think the EPU-6 engine was the problem, I am waiting for a few more days stability to prove the theory.
EUP-6 will lower your clock speed when idling, and then bump up your performance when you start doing things. In my case I would go from playing a game ( Skyrim) to running IE, and EPU-6 would change modes DOWN. In reverse, I would be doing nothing. then run IE or media player, and EPU-6 would change modes UP. Those state changes are where I think I was getting blackscreens and lockups.
I still don't understand it exactly, I think the combination of my MB changing power/performance AND the GTX680 also changing performce creates some kind of conflict. I have had the Afterburner graph going when the driver crashed, and it shows the GPU power maxing out when the driver crashed. All other graphs bottom out ie. the whole card "hiccups".
So I will put the core voltage back to defaults, and also set the Nvidia display/performance options all back to defaults, and keep the EPUJ-6 engine stuck on max-performance, which is basically leaving the MB running at 100% stock CPU and power. I expect that will prove stable and resolve the problem.
Crossing my fingers.

MSI Afterburner 2.2.4 - Voltage oc nerf for GTX 670 PE / GTX 680 Lightning

Looks like Nvidia has given MSI a bashing for allowing voltage adjustments with these cards.
Disappointing as the actual box states:
Quote from: mikeo, OcUK Forums
Yet another new version just released:
http://event.msi.com/vga/afterburner/download.htm#
MSI Afterburner Version 2.2.4 (2012/9/18)
- Added new graphics cards support
- Change the NVIDIA Kepler series voltage control mode
And it's the 2nd item that is maybe of interest to those of us with Kepler based GPU's! Basically the GPU core voltage has been now locked for all cards (including the 680 Lightening and the 670 PE) to 1.175v. This by all accounts was by the direction of Nvidia/MSI themselves.
Suggested reading is the last few posts on this thread at Guru3D (post #67 onwards):
http://forums.guru3d.com/showthread.php?t=364858
One quote from Unwinder:
it will be standard 1175mV, similar to all other 680 on the market. Advanced core voltage control of Lightning will be totally disabled, so it won't be different comparing to any other 680.
Though there are still two ways round this.
1) Continue to use version 2.2.3
2) Use 2.2.4 (or later when it becomes available) but use the work around that Unwinder gives in a later post.
Looks like Nvidia is continuing to put the pressure on to prevent any sort of meaningful voltage adjustment.

Quote from: flobelix on 22-September-12, 02:52:20
Sadly Nvidia really dictated this cut down. MSI had to follow. I keep on using 2.2.3 which keeps everything as it should. Poor 660ti users have no choice as only 2.2.4 supports this model. Right now there is no workaround for that gpu.
It's a shame really, I already have a GTX 670 that does 1340/7406, but on Thursday I decided to buy the MSI GTX 670 OC PE, having read this:
Quote from: HardwareCanucks - MSI GTX 670 Power Edition OC Review
MSI’s cards have continually impressed us with their willingness to overclock to impressive levels. With a bit of coaxing via MSI’s AfterBurner software to maximize the Power Limit and add 100mV to the core and memory voltage (PLL was also increased by 50mV) the GPU hit an impressive 1388MHz while the memory petered out at 6524MHz. Both of those clock speeds are personal bests but we have a feeling like there’s more in the tank should MSI decide to release a GTX 670 Lightning.
For those of you wondering, at these speeds, the actual Boost clock we typically observed in games was between 1450MHz and 1465MHz.
Source
I got my MSI GTX 670 OC PE on Friday, will see what it can do tomorrow, even at factory clocks it should be on par with a reference GTX 680, I only game at 1920x1200 anyway, so it will be great.

MSI GTX 680 Lightning OC problem

Hi,
Im hoping i can find some help here. Im having this kind of problem: if i OC my card drivers will crash after few min of playing/benchmarking. Card is only stable with Pre OC setting. tested with 306.23 whql drivers and with 310.70 whql drivers.
Temps are fine about ~50c all to time. i have this "new" card and im using normal bios. Card is only 2 days old
Windows 7 x64
i7 950@4,2 Ghz
MSI GTX 680 Lighthing
12 GB g.skill 1600 mhz ram
Thermaltake toughpower 1200 w

Quote from: zbychu222 on 15-January-13, 08:20:52
this card is made for overclocking please you think im not raise gpu voltage again please dont give me that stupid (no offence) answer
if someone buy 680 lighting i think he now what he bought sorry for english
Did your post mean for me? I was replying Zhoti's post and not yours .... Zhoti said he had unstable while adding +50mv and he didn't say about adding GPU volt so I assumed that he didn't add volt and I told him to add voltage no offence OK? Also sorry for my English language (I'm not quite good enough in English).
Froggy Gremlin was right, I think you're starting hijack this thread, you may make/start your own thread if you want to.

GTX 680 Lightning very slow

Hello there,
I'm stuck with the installation of the graphic card MSI GTX 680 Lightning, which is very, very slow. For sake of comparison, it does not score even 9000 in 3D Mark, while my previous Radeon 5770 reached 17000 without any problem.
I tried several actions:
Remove drivers with drive sweeper under safe mode.
Installed updated drivers.
Reinstalled Win 7 64 bits
None of that make any difference. If I return to the previous card, the system works well again.
My PC is:
Processor: Intel Quad Core i7-960 (chipset Intel X58 (Tylersburg 36S) + ICH10R)
Mobo: XFX MB-X58I-CH19
Memory: 12 GB (Kingston 4096 MB PC3-10600 DDR3 SDRAM triple channel)
HDs: SATA 3 Gb/s SAMSUNG HD321KJ and SATA 6 Gb/s ST2000DL003-9VT166
PSU: Corsair TX850
Operational System: Windows 7 64 bits Ultimate
Graphic card: MSI N680GTX Lightning 2 GB GDDR5 PCI-E 3
Does anybody have any idea on what should I do to make it work?
Could it be some incompatibility with my mobo?
Best regards,
Antonio Intini

Quote from: xmad on 01-October-12, 08:19:48
What does gpuz say? (Can you post a screen shot)
Have you installed Afterburner? Is it throttling or anything when using kombuster?
Can you upload a copy of your vbios somewhere for svet to take a look?
<<<NVFLASH>>>
with syntax from cmd:
nvflash -b myrom.rom [ENTER]
then upload myrom.rom somewhere and give a link to it
Are you using the newest applicable bios for your mobo? (Since the booting is an issue this may be easy)
**EDIT: I have been having issue with LUCID MVP since I installed my 680 (not lightning though) I am not sure if that mobo is equiped, might want to try uninstalling if it is and see if it is better.
Hello Xmad,
I updated my BIOS today with the latest file from XFX. Good news: the processor speed is now OK, though SM2 and SM3 in 3dMark are still bad:
Overall score: 11715 (target 19200, but it was not above 8000 before the BIOS update)
SM2 score: 3791 (target 7300)
SM3 score: 5530 (target 10000)
CPU score: 4836 (target 4700) -> great!
I tried to use NVFlash, but it does not run in Win 7 64bits - do you have a version for 64 bits?
Apparently the graphic card works well with Kombustor benchmarkings:
[img=http://s6.postimage.org/6fpb88del/Kombustor_P1599.jpg]
Any suggestion of a next step?

Sudden video crashes/black screen flashing with MSI GTX 680 + MSI GT 640 (PhysX)

I've been running an MSI GTX 680 Lightning + MSI GT 640 (dedicated PhysX) setup since last September with excellent results. Most of my Steam games would crash in less than 10-15 minutes before I added the 640.
Just this week, however, I've noticed a new and different problem. While playing several different games, the monitor randomly flashes black, then the game stutters and finally my whole system crashes. I've never seen this before. The only thing that seems to correct the problem is to scale back the resolution from 2560x1600 to 1920x1200 or even 1280x800.
The problem seems to be getting worse. Now, while doing anything on my PC, the system freezes briefly, the screen rapidly goes black, then turns back on and system unfreezes. This happens 3-5 times in a cycle then stops. The cycle repeats every few minutes and happened twice while typing this post.
I've got the latest graphics and other component drivers installed. All diagnostics say the video cards are working properly, but these problems persist.
Are these indications of failing video cards? Any/all suggestions appreciated.
My system specs: MSI GTX 680 Lightning 2GB, MSI GT 640 1GB (dedicated PhysX), i5-2500K, Asus P8Z77-V, Coolermaster V8, 16GB Corsair Vengeance 1600, 4TB storage, Corsair HX1000, Dell 3008WFP, Windows 8 Pro 64-bit.

First of all remove the GT640 so we can check if the issue is solely related to the GTX680. Then monitor temps in load and idle using Afterburner (>>How to use MSI Afterburner<<)
If problem presists when not using the GT640 remove current drivers in safe mode using >>Driver Fusion<< and install latest MSI driver (http://www.msi.com/product/vga/N680GTX-Lightning.html#/?div=Driver&os=All). Yes, I know that driver is older than Nvidia one but it is a surely working one with the special MSI design and features.

[REQUEST] GOP / UEFI Vbios GTX 680 Lightning

Hello, I would like to request a UEFI/GOP compatible vbios for my GTX 680 Lightning.
S/N: 602-V283-02SB1206123831
Current vbios: _https://www.dropbox.com/s/m5e4tdzpf3w5cdo/GK104.rom?dl=0
Thank you!

Here you go: https://forum-en.msi.com/index.php?action=dlattach;topic=163242.0;attach=10606
.102 is the normal vbios and .112 is LN2.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the desired file included with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

Trouble with SLI GTX 680's on S30

hey guys, im having a VERY frusturating time getting my GTX 680's to SLI on my S30, here are my Specs:
Intel Xenon CPU E5-1603 - @ 2.80GHz
64 - Bit Windows 7 OS
2 - Nvidia GeForce GTX 680's (Both are recongized on device manager and the Nvidia control panel)
S30 Motherboard
8 Gb of physical ram
Flexible SLI Cable from EVGA
1000W power supply
Current Version is: 6.1.7601 Service Pack 1 Build 7601
My current Bios is: A0KT39AUS, 10/08/2012
SMBIOS Version: 2.7
my current Nvidia Driver is: 310.70
My current state of mind: Confussed
from what i've read the S20 systems could only SLI Quadro cards and never had the capability for other cards. but for S30's theres no mention of my cards not being compatible.
the issue as far as i know is the computer can't see the SLI cable (i have tried 3 seperate cables with no succes, though all from EVGA...)
also on a somewhat weird note for some reason my bottom video card is recognized as the top card.... i was always told the card installed on the first PCIe 3.0 X16 lane was recognized first, might just be nothing though thought i should mention it.
if anyone has any ideas on what i should try im all ears.
i can get my three screens to go surround on one card which is fine and dandy my but temps are getting alittle too high for comfort, (not to mention i spent the 500$ on the second card that so far is nothing more than a paper weight)
Solved!
Go to Solution.

you'll be on the bleeding edge trying to power a GTX 690. that card has a maximum power of 300W and uses dual 8-pin PCIe power connections. both 6-pin PCIe drops on your S30 PSU would need to be adapted from 6-pin male to 8-pin female.   even then, you might exceed per-rail output on one or both drops.   everything depends on how much amperage each 8-pin connection uses.   they aren't always split evenly.
assuming the x16 card power draws 60~75W, that leaves around 110~120W per each 8-pin.   adapting each of the S30's PSU 6-pin sockets into 8-pin should leave enough headway provided one of the 690's 8-pin sides doesn't exceed 150W.   i don't have access to the GTX 690 design specs to know for sure.
since we've not tested it, please understand that there's no guarantee that a GTX 690 will work for you under maximum load.   it should work but you're on your own for testing and support.

Issue with Gtx 680 Twin Froz? 3dmark 11 scores

Hey guys. I will be very greatful. Can somebody make for me 5 loops from a row in 3dmark 11 in performance mode?
I ask because i have very difference results. For me , my scores are fluctuating too high. Scores are too much variant.
If somebody make 5 loops and paste here scores ok? Please , please. Cheers.
pc:
3770k 3.5 stock
Msi Twin Frozr Gtx 680
8gb ram
301 whql
Please have the same clocks on cpu and gpu on that loops.
What is your biggest difference in points between score to next score?
I mean from a row. Score to next score, from a row. So i ask about first 5 scores.
Many peoples have that differences much smaller , like variances of 10-20+ points.
Next thing is that my friend have Gtx 680 Twin Frozr and that card on my computer have much smaller fluctuations, like 10-25 points. Why my card have 40-59:(? I want RMA card. What now?
But maybe, if somebody will be have similiar like me differences of 40-59 points i will be more patient.
Look,that are my scores:

Both cards work perfectly alone. I can even get a 50 hertz overlock in afterburner on both cards. If it is the board were can I buy a good sli bridge that is reliable. One thing I noticed is the bridge seems kinda loose on the connectors. It is really easy to pull it off unlike my old crossfire bridge i had.

MSI Lightning GTX 680 SLI issue

Similar Messages

Maybe you are looking for