MSI Liveupdate3 Intel INF Update
As a new user, I will do my best to avoid revealing that I, in fact, know very little about PC's, and even less about motherboards. Unfortunately for me, I recently decided to use MSI's Liveupdate3, and pretty much just downloaded and installed everything it had selected, being the amateur moron that I am. This meant that I flashed the bios, and also downloaded and installed the Intel INF update under "live driver" that is version 5.00.1012. Everything seems to be working fine (thank god, because after reading these forums I will never ever again flash my bios), except that now during boot up I get an odd "err" noise right after a beep. A techie friend of mine didn't recognize the noise, nor did he feel that it was a problem. However, the other change my system experienced after flashing the bios and the inf update was that it now thinks I am running a dual proc pc; which I am not (I will list specs at the bottom). I noticed this by looking in the "device manager" area. Uninstalling one of the procs doesn't seem to help; when I boot up the 2nd is right back there. Under the system information tab it also shows that there is two procs. Also, (I hope I am saying this in a way you can understand due to my limited knowledge) under the system information tool, it seems like there is another of all the devices listed. (I wish I could paste my entire system information printout here). My techie friend says that there seems to be a lot of resource sharing going on with copies of devices that obviously don't excist. At first I was convinced that this all had to do with my flashing to the latest bios, but I think that it has to do with the Intel INF update. My techie friend says that he has a hunch that if I installed it again I would see three of everything. I would really like to get my PC back to thinking that it only has one proc and isn't sharing all these non excistent devices, and then uninstall msi liveupdate and forget I was ever such an idiot. I would really appreciate any kind of input; here or at my e-mail [email protected]
Thank you for your time.
System Specs (homemade comp, listed as best as I know)
Mobo: MSI Intel 875P Neo-FIS2R
Bios version: 1.60
Intel INF version (from Liveupdate3): 5.00.1012
Proc: Intel p4 2.6 gigahertz FSB 800MHz HT enabled
Video card: Leadtek Winfast a310 Ultra TD (Geforce 5600 Ultra 128mb ddr)
Sound Card: Soundblaster Audigy 2 Platinum
Ram: 2 sticks Kingston Hyper X 512mb DDR
Case: Antec Plus 1000 Series 430W TruePower ATX12V
Monitor: Viewsonic g220fb
Speakers: Klipsch Promedia 5.1
Modem: Creative Modem Blaster v.92 PCI
Hard drive: Western Digital 120gig 7200rpm
DVD Drive: ATAPI DVD Rom 16x max
CDRW Drive: ATAPI MSI 52x max
Operating System: Windows XP
NO FLOPPY DRIVE
In device manager it lists that I have 3 mice (two HID-Compliant one PS/2 Compatabile), when I only have two; one wireless, one wired. Under "Universal Serial Bus Controllers" it lists USB Root Hub 5 times. Under "Human Interface Devices" it lists USB Human Interface Device 3 times. The USB devices I have connected currently are a gamepad and the receiver for my wireless logitech keyboard/mouse. Under "Monitors" it lists my Viewsonic g220fb, but then "default monitor" 3 times. The only other display I have attached is a tv connected to the video out on my geforce 5600 Ultra. Also, under the "Computer" tab it lists "ACPI Multiprocessor PC", which it should because of the Hyper Threading?
That is the double listings under device manager, which I see as less of a problem. What seemed more vexing to my techie friend was what was listed under the system information tool.
Using the system information tool, this what I am seeing under "hardware resources". (I hope this is readable =(. it looks better in the text doc).
System Information report written at: 08/02/03 18:18:38
[Hardware Resources]
[Conflicts/Sharing]
Resource Device
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
I/O Port 0x000003C0-0x000003DF Intel(R) 82875P Processor to AGP Controller - 2579
I/O Port 0x000003C0-0x000003DF NVIDIA GeForce FX 5600 Ultra
IRQ 16 NVIDIA GeForce FX 5600 Ultra
IRQ 16 Intel(R) 82801EB USB Universal Host Controller - 24D2
IRQ 16 Intel(R) 82801EB USB Universal Host Controller - 24DE
IRQ 18 Intel(R) PRO/1000 CT Network Connection
IRQ 18 Intel(R) 82801EB USB Universal Host Controller - 24D7
IRQ 18 Creative SB Audigy
IRQ 19 Intel(R) 82801EB USB Universal Host Controller - 24D4
IRQ 19 OHCI Compliant IEEE 1394 Host Controller
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF Intel(R) 82875P Processor to AGP Controller - 2579
Memory Address 0xA0000-0xBFFFF NVIDIA GeForce FX 5600 Ultra
I/O Port 0x000003B0-0x000003BB Intel(R) 82875P Processor to AGP Controller - 2579
I/O Port 0x000003B0-0x000003BB NVIDIA GeForce FX 5600 Ultra
[DMA]
Resource Device Status
Channel 4 Direct memory access controller OK
Channel 2 Standard floppy disk controller OK
Channel 3 ECP Printer Port (LPT1) OK
[Forced Hardware]
Device PNP Device ID
[I/O]
Resource Device Status
0x00000000-0x00000CF7 PCI bus OK
0x00000000-0x00000CF7 Direct memory access controller OK
0x00000D00-0x0000FFFF PCI bus OK
0x000003B0-0x000003BB Intel(R) 82875P Processor to AGP Controller - 2579 OK
0x000003B0-0x000003BB NVIDIA GeForce FX 5600 Ultra OK
0x000003C0-0x000003DF Intel(R) 82875P Processor to AGP Controller - 2579 OK
0x000003C0-0x000003DF NVIDIA GeForce FX 5600 Ultra OK
0x0000B000-0x0000BFFF Intel(R) 82875P Processor to PCI to CSA bridge - 257B OK
0x0000BC00-0x0000BC1F Intel(R) PRO/1000 CT Network Connection OK
0x0000E000-0x0000E01F Intel(R) 82801EB USB Universal Host Controller - 24D2 OK
0x0000E400-0x0000E41F Intel(R) 82801EB USB Universal Host Controller - 24D4 OK
0x0000E800-0x0000E81F Intel(R) 82801EB USB Universal Host Controller - 24D7 OK
0x0000EC00-0x0000EC1F Intel(R) 82801EB USB Universal Host Controller - 24DE OK
0x0000C800-0x0000C807 Creative Modem Blaster V.92 PCI DI5633 OK
0x0000C400-0x0000C43F Creative SB Audigy OK
0x0000CC00-0x0000CC07 Creative Game Port OK
0x0000C000-0x0000C07F VIA OHCI Compliant IEEE 1394 Host Controller OK
0x00000A79-0x00000A79 ISAPNP Read Data Port OK
0x00000279-0x00000279 ISAPNP Read Data Port OK
0x00000274-0x00000277 ISAPNP Read Data Port OK
0x00000010-0x0000001F Motherboard resources OK
0x00000022-0x0000003F Motherboard resources OK
0x00000044-0x0000005F Motherboard resources OK
0x00000062-0x00000063 Motherboard resources OK
0x00000065-0x0000006F Motherboard resources OK
0x00000072-0x0000007F Motherboard resources OK
0x00000080-0x00000080 Motherboard resources OK
0x00000084-0x00000086 Motherboard resources OK
0x00000088-0x00000088 Motherboard resources OK
0x0000008C-0x0000008E Motherboard resources OK
0x00000090-0x0000009F Motherboard resources OK
0x000000A2-0x000000BF Motherboard resources OK
0x000000E0-0x000000EF Motherboard resources OK
0x00000290-0x00000297 Motherboard resources OK
0x000003F0-0x000003F1 Motherboard resources OK
0x000004D0-0x000004D1 Motherboard resources OK
0x00000400-0x0000043F Motherboard resources OK
0x00000020-0x00000021 Programmable interrupt controller OK
0x000000A0-0x000000A1 Programmable interrupt controller OK
0x00000081-0x00000083 Direct memory access controller OK
0x00000087-0x00000087 Direct memory access controller OK
0x00000089-0x0000008B Direct memory access controller OK
0x0000008F-0x0000008F Direct memory access controller OK
0x000000C0-0x000000DF Direct memory access controller OK
0x00000040-0x00000043 System timer OK
0x00000070-0x00000071 System CMOS/real time clock OK
0x00000061-0x00000061 System speaker OK
0x000000F0-0x000000FF Numeric data processor OK
0x00000060-0x00000060 PS/2 Compatible Mouse OK
0x00000064-0x00000064 PS/2 Compatible Mouse OK
0x000003F2-0x000003F3 Standard floppy disk controller OK
0x000003F4-0x000003F5 Standard floppy disk controller OK
0x000003F7-0x000003F7 Standard floppy disk controller OK
0x000003F8-0x000003FF Communications Port (COM1) OK
0x000002F8-0x000002FF Communications Port (COM2) OK
0x00000378-0x0000037F ECP Printer Port (LPT1) OK
0x00000778-0x0000077B ECP Printer Port (LPT1) OK
0x0000FC00-0x0000FC0F Intel(R) 82801EB Ultra ATA Storage Controllers OK
0x000001F0-0x000001F7 Primary IDE Channel OK
0x000003F6-0x000003F6 Primary IDE Channel OK
0x00000170-0x00000177 Secondary IDE Channel OK
0x00000376-0x00000376 Secondary IDE Channel OK
0x00000C00-0x00000C1F Intel(R) 82801EB SMBus Controller - 24D3 OK
[IRQs]
Resource Device Status
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 16 NVIDIA GeForce FX 5600 Ultra OK
IRQ 16 Intel(R) 82801EB USB Universal Host Controller - 24D2 OK
IRQ 16 Intel(R) 82801EB USB Universal Host Controller - 24DE OK
IRQ 18 Intel(R) PRO/1000 CT Network Connection OK
IRQ 18 Intel(R) 82801EB USB Universal Host Controller - 24D7 OK
IRQ 18 Creative SB Audigy OK
IRQ 19 Intel(R) 82801EB USB Universal Host Controller - 24D4 OK
IRQ 19 OHCI Compliant IEEE 1394 Host Controller OK
IRQ 23 Standard Enhanced PCI to USB Host Controller OK
IRQ 17 Creative Modem Blaster V.92 PCI DI5633 OK
IRQ 21 VIA OHCI Compliant IEEE 1394 Host Controller OK
IRQ 0 System timer OK
IRQ 8 System CMOS/real time clock OK
IRQ 13 Numeric data processor OK
IRQ 12 PS/2 Compatible Mouse OK
IRQ 6 Standard floppy disk controller OK
IRQ 4 Communications Port (COM1) OK
IRQ 3 Communications Port (COM2) OK
IRQ 14 Primary IDE Channel OK
IRQ 15 Secondary IDE Channel OK
IRQ 5 Intel(R) 82801EB SMBus Controller - 24D3 OK
[Memory]
Resource Device Status
0xA0000-0xBFFFF PCI bus OK
0xA0000-0xBFFFF Intel(R) 82875P Processor to AGP Controller - 2579 OK
0xA0000-0xBFFFF NVIDIA GeForce FX 5600 Ultra OK
0xC0000-0xDFFFF PCI bus OK
0x40000000-0xFFDFFFFF PCI bus OK
0xFEE01000-0xFFDFFFFF PCI bus OK
0xFC800000-0xFE8FFFFF Intel(R) 82875P Processor to AGP Controller - 2579 OK
0xDFF00000-0xEFEFFFFF Intel(R) 82875P Processor to AGP Controller - 2579 OK
0xF0000000-0xF7FFFFFF Intel(R) 82875P Processor to AGP Controller - 2579 OK
0xFD000000-0xFDFFFFFF NVIDIA GeForce FX 5600 Ultra OK
0xE0000000-0xE7FFFFFF NVIDIA GeForce FX 5600 Ultra OK
0xFE900000-0xFE9FFFFF Intel(R) 82875P Processor to PCI to CSA bridge - 257B OK
0xFE9E0000-0xFE9FFFFF Intel(R) PRO/1000 CT Network Connection OK
0xFEBFFC00-0xFEBFFFFF Standard Enhanced PCI to USB Host Controller OK
0xFEAF0000-0xFEAFFFFF Creative Modem Blaster V.92 PCI DI5633 OK
0xFEAEF800-0xFEAEFFFF OHCI Compliant IEEE 1394 Host Controller OK
0xFEAE8000-0xFEAEBFFF OHCI Compliant IEEE 1394 Host Controller OK
0xFEAEF000-0xFEAEF7FF VIA OHCI Compliant IEEE 1394 Host Controller OK
0xFED20000-0xFED8FFFF Motherboard resources OK
0xFEE00000-0xFEE00FFF Motherboard resources OK
0xFFB00000-0xFFBFFFFF Intel(r) 82802 Firmware Hub Device OK
0xFFDFFC00-0xFFDFFFFF Intel(R) 82801EB Ultra ATA Storage Controllers OK
Similar Messages
-
hi, im still new to intel chipset board. im just curious is Intel(R) Chipset Software Installation Utility same as Intel INF update ? and i downloaded the latest version that is 4.30.1006. i installed that but when i run msi liveupdate, it shows that i have 4.20.1006 and ask me to update it to 4.30.1006. Should i download the one that msi liveupdate ask too or forget about it ? thank you.
Quote
is Intel(R) Chipset Software Installation Utility same as Intel INF update
Yes. -
Hi,
i have big problem with my MS-6728 (865PE Neo2-S) and Geforce 4 Ti 4200.
After installing Intel inf update for chipset my Windows XP Pro SP1 stop booting and freeze (if i use Detonator 61 or higher) or just use standart VGA driver (if i use Detonator version 41).
If i remove Intel chipset (i tried all versions) - video is working good
Why Intel Inf update chipet drivers have conflict with my video card ?Hi,
i did as You say - remove Windows XP, format my HDD, installed again Windows XP, installed Intel Inf update - system Ok
install video drivers - freeze and crush.
Nothing help ....
I found on this forum that some people have problem with video like me. they talk about bad agp port driver.....
What can i do now ? -
P35 Platinum - Intel INF Update kills USB ports?
Hi All,
I've just built a new system and when I ran the Intel INF Update from the driver cd that came with the motherboard it seemed to update everything fine, but when it re-booted the usb ports weren't working in Windows. Unfortunately both my keyboard and mouse are usb so I had no option but to re-install windows again (which wasn't such a big issue because I hadn't installed anything else yet). Should I bother trying to update them again from the latest versions online? Or as everything seems to be working fine as it is, should I just leave them be?Hello, you need to wait a bit the USB devices to be re-detected.(just wait 1 min after you logon in windows).
If the drivers really broke the USB ports, reboot PC hit "F8" just after BIOS post(before OS booting) and choice "Last good known Configuration" from there. It will restore provisional working state. -
Intel Inf Update 6.0.0.1014 warning!
Hi
I tried the new Intel INF Drivers 6.0.0.1014 through the live update on my 865PE Neo2-PFS (bios 3.2) motherboard by using the live update.
The sound when playing games became all messed up!......I´ve trieds reinstalling VGA and sound drivers but its the same.
When reinstalling the old Intel INF Drivers that came with the MSI CD everything is back to normal and sounds are working fine...
Question: Anyvone else having problems with these drivers??????????????
Second issue is that there is the same with the latest core center 1.6.60.......the auto mode for the fan do not work....the fan stays at full rpm all the time.
The 1.6.5.0 version were fine......
Question: Any comments???
/ Mr W /I can´t find it on http://www.intel.com - chipset d/L.
Still 5.1.1.1002 there for the 875 / 865 chipset.
MSI surprises by relasing this new INF driver before official Intel D/L.
two simular drivers :
Intel Chipset Software Installation Utility 6.0.0.1014
=>Posted by: Newsfactory.
=>Wednesday, June 02 @ 11:17:07 CEST
The Intel Chipset Software Installation Utility installs to the target system the Windows* INF files that outline to the operating system how the chipset components will be configured. This is needed for the proper functioning of the following features:
Core PCI and ISA PNP Services
AGP Support
IDE/ATA33/ATA66/ATA100 Storage Support
USB Support
Identification of Intel Chipset Components in the Device Manager
Note: This release adds SATA Storage support.
Download Intel Chipset Software Installation Utility 6.0.0.1014 @ Station-Drivers.com
Intel Chipset Software Installation Utility 6.0.1.1002
=>Posted by: Newsfactory.
=>Saturday, June 05 @ 00:16:17 CEST
The Intel Chipset Software Installation Utility installs to the target system the Windows* INF files that outline to the operating system how the chipset components will be configured. This is needed for the proper functioning of the following features:
Core PCI and ISA PNP Services
AGP Support
IDE/ATA33/ATA66/ATA100 Storage Support
USB Support
Identification of Intel Chipset Components in the Device Manager
Note: This release adds Intel(R) E7520 & Intel(R) 915G/P/GV (ICH6) support.
Download Intel Chipset Software Installation Utility 6.0.1.1002 @ Station-Drivers.com -
MSI GT60 Intel FW update or recover
Hi. I have notebook msi gt60 and one day Intel firmware has disapeared in BIOS I have ME FW Version N/A but it was 8.0.x.x don`t remember exactly). I would like to flash this 1.5 MB firmware but I don`t have this firmware and I can`t get it, also FWUpdLcl.exe doesn`t recognize my notebook platform :(. Could somebody help to get firmware and flash tool for msi gt60?
Use flash_me.BAT to flash the ME too
-
Live Update 3 - Intel INF hangs
I've been having problems with my 865PE Neo2 crashing randomly while running games so I decided to try updating drivers. One of the weird things I see is WinXP telling me a "serious error" has ocurred and is a "driver failure".
Anyway, I run Live Update 3 and tell it to download the Intel INF file. It took me a least a dozen attempts to get a full download of the file. Now that I install it, I get to 60% and the system hangs. ;(
Fortunately I can reboot the system and it still runs but I have no idea if the Intel INF is the correct version or if it will stop these random crashes.
Details on the crashes:
I'm running with a 3.0 gHZ processor at stock speed. I have a gig of GEIL DDR433 memory. Audio is an Audigy 2, onboard sound is disabled. Video is an ATI 9800 PRO. My boot drive is an SATA drive and I also have 3 IDE drives not counting a CD-R and DVD drive.
Crashes occur during LAN or internet gaming with BF1942. Sometimes the app exits to desktop. Sometimes I get a sound lockup and have to reset the system.
Any ideas?My system specs are listed in my first message at the top of this thread.
I did read through the ReadMe in the install package and I did see something that is rather disturbing. The instructions lead me through control panel and device manager to list devices by connection. The names of the devices the ReadMe tells me to look for DO NOT match what I see in my control panel. I'm definitely looking at the WinXP folder for the INF.
The Readme file says to look for these PCI devices:
12. Right-click on the line containing the description
PCI standard host CPU bridge
-or-
PCI standard ISA bridge
-or-
PCI standard PCI-to-PCI bridge
-or-
PCI System Management Bus
-or-
Standard Dual PCI IDE Controller
-or-
Standard Universal PCI to USB Host Controller
What I'm seeing on my system are lines like
"SMBus Controller" with the chip number at the beginning of the line. The files LOOKS like the appropriate one but why are the instructions wrong? ?(
I still tried to follow the ReadMe instructions anyway and burnt the "Disk1" folder to a CD. I tried to update the driver for my "SMBus Controller" and when it looked at the CD it said it didn't find any drivers there. X(
MSI, why oh why didn't you include drivers on your CD! ;(
Any suggestions on how to do the suggested repair? The INF install doesn't show up in Add/Remove Programs. -
Identify Intel INF driver version
How do I check my Intel INF driver version? The reason I ask is that in the Device Manager (running Win XP Pro) under system devices, if I choose any of the 'Intel (R)....' devices it says that the driver version is 5.1.1009.
But the MSI liveupdate utility says my current version is the latest version which is reported as being 6.0.1.1002
I know I have the 3.50 BIOS and the latest is 3.0A
It also says I have the latest AC97 drivers and Realtek drivers and I can confirm this by looking at the driver number in device manager for those devices???
I keep getting random reboots but only when booting up (seems to happen when it scans my USB Speedtouch 330) and also sometimes when shutting down or restarting it resets early. Coming back into windows it asks to submit an error report and the report says a device driver caused it. I can't help but think it has something to do with my Speedtouch 330??? (not the speedtouch 330 itself but the USB interface on the motherboard)
Details in sig.Quote
Originally posted by offender
How do I check my Intel INF driver version? The reason I ask is that in the Device Manager (running Win XP Pro) under system devices, if I choose any of the 'Intel (R)....' devices it says that the driver version is 5.1.1009.
Try this ( works for me ) :
Look in Program / Intel / Infinst / readme
There should be a read me file that show this info….
* Product: Intel(R) Chipset Software Installation Utility
* Release: Production Version
* Version: 6.0.1.1002
* Target Chipset#: Intel(R) E7520 & Intel(R) 915G/P/GV
* Date: May 07, 2004
post about MSI liveupdate functionality
Live update 3
Have you checked for latest 330-modem driver / firmware, for best Sp2 compability.
Also set your mem.voltage to 2.7v in bios.
Possible that your PSU is on the limit to power up all your stuff. -
Hi
In MSI'sr site I saw that Intel INF Drivers are supported by win9x (I use WIN98SE).
After downloading and extracting I read, in the readme.txt file, the following:
One of the following operating systems must be
fully installed and running on the system
before installing this software:
Windows* 2000 5.00.2195 (Original Release)
Windows* XP 5.10.2600 (Original Release)
Windows Server* 2003 5.20.3790 (Original Release)
Please help,
Thanks in advance
xyoavxhttp://developer.intel.com/products/chipsets/index.htm
select the chipset, then select Product support tab, and click Download under Intel® Chipset Software Installation Utility, then select the operating system you use
MSI only provide support for Windows XP
EDIT: the download provides drivers for all versions of Windows, so the MSI download will work on W98SE too -
Intel Inf Driver + Radeon 9700 Pro = Graphic Corruption
Greetings all,
Here is the problem:
Upon a fresh install of Windows XP Pro w/ SP1, I immediately installed the Intel Inf Drivers for AGP support.
On reboot, the little motion bar underneath the Windows XP load screen is graphically corrupted. The monitor would blank out once it tried to activaly go into Windows. Safe Mode has the same corruption, but the screen would let me boot into 640 x 480 (not sure how many colors though).
I have had the 9700 pro RMA'd and the motherboard (865 PE Neo2 PLS) RMA'd. I purchased an Emermax 450W Dual Fan PS. I have tried the video card in another machine (Athlon 64) and it works fine. ATI Video Drivers have no effect. As it corrupted on the default drivers included with Windows XP Pro w/ SP1, that's not the issue. I tried turning off Hyperthreading, Spread Spectrum, loading the failsafe bios defaults, the corruption was still there.
Currently, I have an old GF2 GTS into this machine and it loaded the inf drivers without a hitch. In this installation, the USB mouse actually stops working and I get a warning that the power has surged to the USB port.
Here's the rest of the equipment:
Intel P4 2.8E w/ HT.
MSI MS-6720 i865 PE Neo2 PLS Motherboard
512 MB PC400 RAM
Soundblaster Live Value!
Enermax 450W Dual Fan PS
Plextor 12x10x32 CDWriter
LG 52x CDROM
Osprey 100 Video Capture Card
I'll be posting the same issue on the Intel Forums and ATI forums, along with Rage3D. I have a feeling it's something to do with ATI's native interface with the AGP slot on the mobo, but I don't know for sure.
Thoughts?In answer to the above,
the problem occurs with both the Omega Drivers, the default ATI drivers and the DNA drivers.
If I don't plug in the molex connecter, the video card will not power up at all and there is a warning to plug it in. -
GNB MAX FISR Intel inf 4.30.1006 installation
Hi, when I installed my Win2k Advanced Server for the first time I supplied the Intel inf chipsets drivers from the diskette that comes with the board, it was version 4.10.1011
Now I want to install the latest ones (4.30.1006) but when run the installer and then reboot, I go to device manager and I keep seeing version 4.10
How to upgrade to chipset driver 4.30 ???
anyone experience this ?This is normal. The Intel Inf is a utility that installs the most recent drivers. The version # is the utility #. The individual drivers are numbered the same as the utility # that version first came with. If the individual driver is the most current version the number will not change. As a result when you update some individual driver# will change and some won't
-
Help Too MSI GX640 Intel Core i5 Processor 2,2.6
Hi hope you can help me
I have a MSI GX640 Intel ® Core ™ i5 Processor 2,2.6
I would like to have a higher CPU in've heard it may well do
Intel ® Core ™ i5 Processor 2,6.7 perhaps more I hope it will in time at
The reason I do not buy the new model is that it has firewire as my new HD camera
so, I prefer this design usually one is also
what else can I do enough I need firewire could dilate
may awnings me wrapped Intel ® Core ™ i5 Processor I can go out to buy and put in
it is in is an i5 430M I know that it goes beyond my warranty on used and Inge on
it is my understanding
so I can get it to be 2,6,7 welcome increased
Regards SørenHi HarmitClaire,
Welcome to the Apple Support Communities!
I understand that your MacBook Air is not charging as expected. In this situation there are troubleshooting steps that I would recommend. Please use the attached article as a resource for steps to help you resolve this situation.
Mac notebooks: All about batteries - Apple Support
My battery is not charging
Confirm the correct wattage AC adapter for the computer. A power adapter rated for a lower wattage than is required for the system may not reliably charge the computer. For assistance identifying the proper adapter, review Intel Based Mac notebooks: Identifying the right power adapter and power cord--US. Additional adapter troubleshooting is available in Troubleshooting MagSafe adapters. If issues persist please reset the SMC.
Best regards,
Joe -
HELP, Intel Security Update, no reboot, grey screen of death
so I just downloaded the latest intel security update (i dont even remember the nomencalture) and now my revision A 2007 model macbook pro will not reboot.
It stays on the grey screen with the grey pinwheel.
I reset the PRAM, and nothing.
I took the battery out and held down the power button, and nothing.
so i put in Disc 1 of the instal disc, and started the reinstall process, but stopped because I was not sure if this would format the drive and i would lose everything. So i manually shut down the MBP, and now the I cannot eject the disc.
and it still stalls on the grey screen of death.
please help !
sincerely loneshark2000did that, too !
was able to get to Disk Utility, Verified the disk, Repaired the disk (no repairs were needed)
went to Start Up Disk, selected the hard drive,restarted, and still she gets stuck on the grey screen.
just got off the phone with mac support. and they recommended target disk mode to grab some of my necessary files. then to conduct a fresh install of the OS X, using archive and install. preserving user settings.
so i guess im off to the store to get a 6 pin to 6 pin.
ugh, what a dilema ! thanks for the reply Sig. -
MSI GX640 Intel WiFi Link 5100 AGN dropping connection every ~10 minutes
Problem: Getting disconnected every 5-20 minutes. Network card: Intel WiFi Link 5100 AGN.
Solutions tried: Router restarted? No idea what to do, googling it yielded no viable results, even though I can't say I'm pro at googling. Found no drivers on MSI homepage.
MSI GX640
Intel WiFi Link 5100 AGN
Further information:
My MSI GX640 had problems with heating and was sent to be repaired and got its heatzink switched. I started getting disconnects every 10 minutes or so, sometimes less than a minute apart, sometimes up to 20 minutes without a disconnection.
Don't really know what information you might need, so please do tell if something is missing.Those are not the newest: http://eu.msi.com/index.php?func=nbdriver&maincat_no=135&prod_no=1998
You'll get the newest at: http://www.intel.com/support/wireless/detect.htm - click the check buttom and follow steps. <- These are from 18-10-2010
But yeah you'll might need to change which wireless channels you are on. If you aren't using Wireless connection then you might have to check your LAN card drivers or this can allso be caused by your ISP or bad connection on your internet line. -
Ref news: https://www.archlinux.org/news/changes- … deupdates/
Related forum posts:
https://bbs.archlinux.org/viewtopic.php?id=188777
https://bbs.archlinux.org/viewtopic.php?id=188252
This news sounds quite scary to me. The big question is if anything I do can brick my computer.
Does doing this on kernels < 3.17.2 brick my computer?
Will upgrading to 3.17.2 without doing this brick my computer?
Last edited by simendsjo (2014-10-23 07:25:02)Hi,
I have a rather silly question. I can't figure out if I have Intel microcode updates enabled. I have installed the intel-ucode package from [extra] (extra/intel-ucode 20140624-1), and I get this when I check dmesg:
prakhar@sim74stic ~ $ dmesg |grep microcode
[ 11.576665] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 11.709317] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 11.710515] microcode: CPU0 updated to revision 0x1b, date = 2014-05-29
[ 11.710545] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 11.710602] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 11.711282] microcode: CPU1 updated to revision 0x1b, date = 2014-05-29
[ 11.711296] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 11.711341] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 11.712068] microcode: CPU2 updated to revision 0x1b, date = 2014-05-29
[ 11.712080] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 11.712134] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 11.712859] microcode: CPU3 updated to revision 0x1b, date = 2014-05-29
[ 11.712897] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[ 11.712972] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[ 11.713683] microcode: CPU4 updated to revision 0x1b, date = 2014-05-29
[ 11.713698] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[ 11.713736] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[ 11.714451] microcode: CPU5 updated to revision 0x1b, date = 2014-05-29
[ 11.714469] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[ 11.714503] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[ 11.714878] microcode: CPU6 updated to revision 0x1b, date = 2014-05-29
[ 11.714888] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[ 11.714907] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[ 11.715282] microcode: CPU7 updated to revision 0x1b, date = 2014-05-29
[ 11.715322] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
My question is, did the microcode update work? And should I add it to mkinitcpio to trigger it early? (sudo modprobe microcode doesn't change the output above).
Last edited by prakharsingh95 (2014-10-23 16:21:56)
Maybe you are looking for
-
Hi all, I need to know wether there is any code available for speech to text conversion..???? also wether this code can be implemented with any existing project ??
-
Bulk Fetch From an Oracle Sequence
I am trying to get a range of sequence values from an Oracle sequence. I am using the option as show below using query SELECT SEQUENCE_NAME.NEXTVAL FROM SYS.DUAL CONNECT BY LEVEL <= 10. The above SQL gets 10 sequence value. I just wanted to to check,
-
Trying to sync with desktop (Local PC), searches but never finds connected PC
trying to sync with desktop (Local PC), searches but never finds connected PC. How to manually sync?
-
Avoid opening same Form Multiple times
hi Can anyone help me , how to put restruction not to open the same form multiple times . regds/sanjay
-
InDesign CS4 crashes on Lion. Bonus: Can't uninstall CS4
I recently used Migration Assistant to move everything from my old iMac G5 (Leopard) to my new iMac with Lion. InDesign now crashes on startup, though PS and AI seem to be working ok. I'd like to uninstall my entire CS4, and do a fresh install from m