MSI Media Live problems out of the box! :(

Hi everybody!
I have recently bought an MSI Media Live from ebuyer with the hope if replacing and improving on my old MegaPC.
Out of the box all looked well and started to fill the barebones box with all my bits and pieces. Bought an AMD AM2 chip for it and put in some memory from another PC DDR2.
The machine on switch on started the obligatory BIOS checks and off we went. Or so I thought.
First of all I placed my Media Centre 2005 cd in the drive and the machine point blank refused to boot from the CD drive. After a while I thought I would stick XP Home in and do an upgrade from within. The XP Home disk came up with the line about checking system configuration and then hung. This happened repeatedly.
Next plan was install Media Centre on the HDD using another PC. So swapped the RAM back out and the HDD and went for the install. This went without a hitch on the other PC so after the install swapped the RAM and HDD back into the media live.
The Windows startup screen then came up but would get stuck in a reboot loop before windows started. If I asked to boot into safe mode the machine would start. This leads me to believe it is a software issue. While in safe mode with networking, managed to get all the updates I could find for both windows and MSI. However still can't get the machine to start in anything but safe mode which is driving me nuts because I can see what the machine is capable of but just can't get into it!
If anyone has any ideas they will be much appreciated. Have run RAM checks and swapped all parts out to make sure they work in other machines which they do and obviously there is nothing wrong with the install CD.
Just seemed to have reached a dead end!#
Thanks in advance.
Alex Smith (In need of a stiff drink!!)

Quote
Next plan was install Media Centre on the HDD using another PC. So swapped the RAM back out and the HDD and went for the install. This went without a hitch on the other PC so after the install swapped the RAM and HDD back into the media live.
The Windows startup screen then came up but would get stuck in a reboot loop before windows started. If I asked to boot into safe mode the machine would start. This leads me to believe it is a software issue.
You can't install Windows on one PC and then transfer the drive into another PC, it won't work unless the other PC is identical, due to differences in hardware abstraction layer and core system drivers.
Have you anyway of trying another optical drive? If you can't, you may want to return the unit to Ebuyer for replacement

Similar Messages

MSI Media Live: TV-Out Probs in HDMI-MCE-Fullscreen-Mode

Hello Folks,
maybe anybody has a hint: my MSI Media Live @ Toshiba Regza 42X3030D loses video-output after switching to full screen mode.
The screen supports acc. to manual via HDMI following modes: 1080p, 1080i and 720p
In Windows mode everything working fine in 1920x1080 interlaced and non-interlaced - but after pressing the green button i got a no-signal-blue-screen (not a BSOD). Hitting Windows-Key i can go back and kill the wmc-task.
Does anybody know in what resolution at which frequency runs mce-fullscreen interface?
Is there any possiblity to edit a config-file to set a resolution/frequency-mode to avoid auto-testing/ajustment?
I would be grateful about every hint.
Thanx

Sorry but your are doing something wrong with your ML.
I just installed the Screensaver ver 3.0beta on my ML and it performs without any hickups or troubles at all.
I'm using the following:
Athlon X2 4200+
2x 1GB DDR800 cheapest I could find
Onboard video 1680*1050*32
XP SP3
Standard MSI supplied drivers.
I did notice you are using 4x memory sticks at DDR800, you should know that the AMD CPU you use doesn't official support 4 (dualsided) sticks at DDR800.
Have you tried running with 2 sticks or reduced speed to DDR667 and 2T commandrate?
Or tried with Vista32 bit?
It's strange you have to put another card in there.
Also, I have altered my CPU-fan direction as the box gets way hot, my CPU fan is now blowing out instead of sucking air in and fill the box with hot CPU-air.
That way the box stays very cold.
It's very easy to change the direction, simply take the top of the cooler off (put a screwdriver in the 4 holes and it comes off) then slide the fan out and turn it around.
Maybe it helps you too.

X4100 LOM problems out of the box

Straight out of the box I am having trouble connecting to lom. Using a serial cable I can connect and see the lom service start after power is connected, when the login line appears i loose control of the session. Any ideas? I don't know what the IP address is set to so I can't setup via browser.

Well, I took my 16GB iPhone 3g (white) back to the Apple Store today and the Genius looked it over -- said that's the first keyboard problem he's seen come in and mentioned that it was strange the "dead zone" on the touch screen was vertical since, according to him, most "dead zones" tend to be horizontal areas. He said the touch screen matrix is laid out in three horizontal bands on the screens.
Bottom line: he gave me a new working iPhone 3g.
He did mention that all returned iPhone 3g's are being sent directly back to the iPhone 3g engineering team for full "autopsies", not just sent back to factory for refurb. He said they want to fully diagnose and understand what defects are out there so as to solve the root cause moving forward.

3 problems out of the box!

1) accelerometer: in the iPod, I have to turn it 360 degrees in every direction before it recognizes the true orientation and flips to it.
2) freezing: I thought Macs werent supposed to freeze. I go to Phone, and it freezes on my contact list - cant scroll, cant even tap a contact thats showing and call. Cant switch to other Phone functions such as Favorites, Visual Voicemail. I had to reset to get it to work.
3) Battery - after full discharge, full charge, lasts 40 mins
What crap! Over the phone they said the best they could do was send me a loaner. No, I want a new one now! Im going to the Apple Store today to, hopefully, get a replacement. Will post on update.

You have `14 days to return it..I have several problems with mine out of the boxx and 5 days old..I'll be returning it for a credit, than purchase a new one right there to make sure that phone gets the 14 day return policy. I was told the 14 days starts on day of purchase so if they exchange one for you that phone will techinically only have a few days left on it for the return..it's a gotcha..I've had 2 bad phones out of 3..but beat the dead line on the 14 day return..so tomorrow?..another phone goes back for a full refund and I'll purchase another one..I'll be thier little pain in this that's for sure..they put a product out there before it was ready in my opinion

Keyboard problems out of the box with iPhone 3g

My iPhone 3g is showing strange keyboard behavior, typically starts when launching the SMS app.
The "P" and Backspace keys, the keys on the rightmost part of the touch area, are non-responsive. The issue will correct itself after 15 mins or so, but it's become very annoying.
I've made sure I'm not touching any other part of the screen as a possible cause. Showed it to and had three other iPhone users see what I see and they all agree it seems like a bug, just to confirm it's not me.
Took it to the Apple Store and of course the iPhone behaves when showing it to the Genius.
Anyone else experienced keyboard problems with 2.0 firmware?

Well, I took my 16GB iPhone 3g (white) back to the Apple Store today and the Genius looked it over -- said that's the first keyboard problem he's seen come in and mentioned that it was strange the "dead zone" on the touch screen was vertical since, according to him, most "dead zones" tend to be horizontal areas. He said the touch screen matrix is laid out in three horizontal bands on the screens.
Bottom line: he gave me a new working iPhone 3g.
He did mention that all returned iPhone 3g's are being sent directly back to the iPhone 3g engineering team for full "autopsies", not just sent back to factory for refurb. He said they want to fully diagnose and understand what defects are out there so as to solve the root cause moving forward.

Display problems out of the box

I just bought a 24" imac with 2 gigs ram and the 7600 gt card. After finally getting the computer delivered to me, I plug it in and turn it on only to experience a completely black screen. The computer is getting power just fine as I can here the setup assistant doing its thing and the kyboard lets me control the sound, but I can see none of it. Ive reset the ram , even though that shouldn't be necessary. I've also followed all steps listed under the apple support page. Does anyone know what the problem could be, and is their any way of fixing it short of taking it in to the local apple store or sending it in for repairs.

Welcome to Discussions, nixon737!
Did you try a PRAM reset?
To reset the PRAM:
1. Shut down the computer.
2. Locate the following four keys on the keyboard: Command (Apple logo), option, P, and R. You will need to hold these four keys down simultaneously in step 4.
3. Start up the computer.
4. Press and hold the Command-option-P-R keys. You must press this key combination after the startup chord sounds, but before the gray screen appears.
5. Hold all four keys down until the computer restarts and you hear the startup chord for the second time.
6. Release the keys.
This might reset a couple of preferences which will then need to be reset - Startup Disc, Sound, possibly Energy Saver.
[edit-
Do you hear the startup chord after you power on? If not, return the unit to Apple, as the lack of it is a "big trouble" diagnostic. Between the PRAM reset, the SMC reset, and the Support items you mentioned having already done, there are only 2 other things that should work - and they are able to work due to the ability of the install disc to supplant OS X and control the operation of the computer:
1. running the Apple Hardware Test, which is done by inserting the grey-labeled Install Disc 1 into the optical drive, shut down, power on and holding down the "d" key from after the startup chord until the spinning progress indicator appears beneath the Apple logo; and also
2. booting from the Install Disc 1 by repeating but holding down the "c" key instead of "d" key so that you can access Disk Utility from the "Utilities" pull-down at the top of the second sceen of the OS X Install Process (which can then be quit after using Disk Utility). After accessing Disk Utility, open the "Help" menu for Disk Utility Help.]

Msi media live Aero problem from clean install of Windows 7

I seem to be having a problem with the media live that nobody else is reporting :-S
With an aero desktop theme selected, my screen display gets messed up (everything is warped, with also a diagonal line down the screen and half of it black)
Because Windows 7 installs with an aero theme enabled as default (if it detects the card is aero capable), it took me ages to select a non-aero theme blindly. Since then, I've tried various versions of the nvidia graphics driver with no success, and I'm a bit lost. Beginning to wonder if my media live is faulty.
The only other unusual thing is that the memory I installed (2x1GB Kingston Hyper-X 800mhz), is running at 667mhz rather than 800 - but I figure this probably just means it's a little underpowered?
Other than that, only other hardware I've installed is an Athlon 64 3800+ and a 500gb Western Digital hd.
Anybody have any ideas?
Many thanks,
David Welch

Quote
However, I noticed when I lifted out the memory that it's rated at 2.0v, whereas the manual for the media live seems to suggest it's only capable of powering up to 1.8v.. So it's almost certainly underpowered which would account for it running at 667mhz.
What you have there is DDR2-667 memory, which is capable of running at 800mhz. From the datasheet:
Quote
This module has been tested to run at DDR2 800MHz at low latency timing of 4-4-4-12
at 2.0V. The SPD is programmed to JEDEC standard latency 667Mhz timing of 5-5-5-15 at 1.8V.
BIOS will by default set your RAM to the SPD settings, in your case, 667mhz. You can manually configure your memory to run at 800mhz, but thats not the issue here, your memory should work fine at default SPD settings.
If you're not planning on any overclocking (which is really not a good idea with these barebones), you should just buy some generic DDR2 RAM, thats all I use, and I don't have any problems.
Quote
It's strange that I only get the screen corruption when Aero is in use, I'm not sure how I'd get Ubuntu to mimic this.
Ubuntu comes with Compiz Fusion, which is another 'fancy' effects laden desktop interface. But you're only using this to test if you get the same problems here.
Quote
There's not been any screen corruption with anything else I've used on the PC (which to be fair isn't that much so far though).
Can you clarify further? As you've suggested so far that you've only used Windows 7 on this system.

MSI Media Live - HDMI Problems

Hi all
Hope somebody can help?
Got a little problem with this system when connected via HDMI cable.
On boot up it displays the Windows Start up info (not sure the correct term) and the logo saying Windows XP loading, but then get a blank screen. If I change over to scart all is OK I can see the desktop.
Possibly something daft, but it has beat me.
Many thanks
Kevin
MSI Media Live AM2 Barebone
Kingston 2GB KIT (2X1GB) DDR2 667MHz/PC2-5300
Samsung SpinPoint HD501LJ 500GB SATAII Hard Drive
AMD Athlon 64 X2 4800+ Socket AM2 (2.5GHz)
Windows XP Pro

Sorted the HDMI problem.... thanks for the help Stu
- I installed, uninstalled, installed, uninstalled and installed the drivers finally got desktop working with HDMI cable. But, now no audio at all not even through scart no startup sounds, no audio through cd player, but when I test in the Realtek High Definition Audio Driver R1.47 I get its stereo test sound . Here goes with the audio drivers
Cheers Kev

String problem using B1ITM2B1ITM out of the box B1iSN 8.8 scenario

Hi all,
    I am testing the out of the box scenario for Item syncronization (B1 to B1)
It works fine except for one thing:
    If the ItemName contains xml special characters like < > & in the xml message they are correctly converted into xml rappresentation < > amp; but when the message is sent to the destination company doesn't happen a reconversion to the readable rappresentation.
What do I have to do to have the exact rappresentation even in the destination company? Should i have to put translation tags into the xsl transformation? If so which they are?
Thank you all in advance, Regards Luca.

Solved...
    I found a bug in the conversion to xml format:
>   is uncorrectly replaced with &gt;
so I have replaced:
<ItemName>
     <xsl:value-of select="BO/Items/row/ItemName"></xsl:value-of>
</ItemName>
with:
<xsl:variable name="itname">
        <xsl:call-template name="b1ilib.strgReplace">
             <xsl:with-param name="subs"><</xsl:with-param>
          <xsl:with-param name="var">&lt;</xsl:with-param>
           <xsl:with-param name="wstrg" select="BO/Items/row/ItemName"></xsl:with-param>
     </xsl:call-template>
</xsl:variable>
<ItemName>
     <xsl:call-template name="b1ilib.strgReplace">
            <xsl:with-param name="subs">></xsl:with-param>
            <xsl:with-param name="var">&gt;</xsl:with-param>
            <xsl:with-param name="wstrg" select="$itname"></xsl:with-param>
     </xsl:call-template>
</ItemName>
A similar problem has been detected here:
B1iSN: Tips, tricks and important topics

Out of the box Media Web Part in VideoPlayerPage.aspx is not video loading dynamically after changing Media Setting

Hi,
We are on SharePoint 2013 and we are using the default SharePoint 2013 Asset Library to upload videos. We are using purely out of the box sharepoint 2013 with no customization at all.
When we click on any videos, It will lead us to the videoPlayerPage.aspx and plays the video that we click on which is what we wanted. But we do not want the player to play videos on load thus we did the following action
Edit Page
Click on the Media Web Part checkbox and the Media Tab in the Ribbon appears
Uncheck "Start Media Automatically"
Stop Editing
After doing this, no matter whatever video was click, it will only load the video which we perform the action on.
How can we undo this change or revert back as we need the videoplayerpage.aspx to load video based on what we click in Asset Library?
Thank you.
Best Regards
Alex Lee

I just did this myself and it did the same to me when editing it via the page editing.
If you open in SharePoint Designer, you can browse to the page (/Forms/Video/VideoPlayerPage.aspx) and change the property in the HTML. This will keep the web part properties from getting overwritten in the DB. You will then be able to open each
video without it playing automatically.
NOTE: You need to delete the asset library, then add it back in order to apply this.
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Brand new IPad 3 out of the box - set up problem with Apple ID

Brand new iPad 3 out of the box - set up problem. It says my Apple ID (email address) is already being used. I reset the password successfully but still says I need another Apple ID. Why won't the ID recornize me?

Open current iTunes on your computer. Connect iPhone to the computer with the Lightning USB Cable. Hold both the Home and Power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If still problem, make Genius reservation or set up Sevice and take or send to Apple for resolution under Warranty.

MacBook Pro 15" i7, out of the box w/problems

My MacBook Pro is brand new out of the box, less than 48 hours, and I'm already having issues with it.
Before the first 24 hours out of the box, I got a message for a forced shut down (see image here: http://www.mactropolis.com/wp/wp-content/uploads/2009/01/macosxkernelpanic.png)
The following day, after coming out of sleep mode, I found it with a scrambled screen.
I haven't installed or transferred anything onto it whatsoever, but just been using Safari. I've heard that people are having problems with using Safari with webpages using Flash, but that might not explain the forced shut down.
I ran disk utility after the forced shut down and a few permissions were fixed but there were no other problems. After the scrambled screen, I ran an extended hardware test twice, and no problems were detected
I'm not sure there are any grounds for taking this to the Genius Bar, but I'm rather irritated for this to be happening when I haven't really started using this computer for more than browsing the internet.
Any suggestions? Might it be as simple as using something other than Safari?

The solution is extremely simple, return it for another. If you bought it from an Apple Store it should be no problem. If you bought it from an Apple Reseller you need to deal with them directly.
Don't wait, do it today.
Roger

Problems with the out-of-the-box Worldnews portlet

Hi all,
I'm having problems when I try to add the out-of-the-box portlet called "World
News" to a portal of my own. Have anyone had problems like that?
More specific I'm getting an XML parsing exception when I add the world news to
my portal. It is strange because the portlet look ok at first but when I try to
select some news source I don't see any of the news afterwards.
Hopefully someone can help my
Stig

Thanks! That was a great help :-)
"Peter Laird" <[email protected]> wrote:
>
Stig,
This is a known bug without a resolution currently. It is being tracked
internally
as CR064184 and is targeted to be fixed for 4.0 SP2.
Sorry!
PJL
"Stig Boye Andersen Aatland" <[email protected]> wrote:
This is the stacktrace hopefulle this will help. If not thanks anyway!
weblogic.xml.jaxp.RegistrySAXTransformerFactory
java.lang.ClassCastException: weblogic.xml.jaxp.RegistrySAXTransformerFactory
at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1509)
at weblogic.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:800)
at weblogic.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:376)
at examples.worldnews.pipeline.ejb.internal.MoreoverNewsPCBean.process(MoreoverNewsPCBean.java:133)
at examples.worldnews.pipeline.ejb.internal.MoreoverNewsPCBean_79tma7_EOImpl.process(MoreoverNewsPCBean_79tma7_EOImpl.java:37)
at com.bea.p13n.appflow.pipeline.internal.PipelineExecutorImpl.executePipeline(PipelineExecutorImpl.java:299)
at com.bea.p13n.appflow.pipeline.internal.PipelineExecutorImpl_x8bn7v_EOImpl.executePipeline(PipelineExecutorImpl_x8bn7v_EOImpl.java:37)
at com.bea.p13n.appflow.webflow.internal.PipelineProcessor.process(PipelineProcessor.java:157)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processTarget(WebflowExecutorImpl.java:1155)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:673)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:688)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:688)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:474)
at com.bea.portal.appflow.PortalAppflowHelper.invokeWebflow(PortalAppflowHelper.java:139)
at com.bea.portal.appflow.PortalAppflowHelper.invokeWebflow(PortalAppflowHelper.java:120)
at com.bea.portal.appflow.PortalAppflowHelper.invokePortletWebflow(PortalAppflowHelper.java:185)
at com.bea.portal.appflow.processor.PortletEventProcessor.process(PortletEventProcessor.java:97)
at com.bea.portal.appflow.processor.AbstractPortalProcessor.process(AbstractPortalProcessor.java:86)
at com.bea.p13n.appflow.webflow.internal.IPProcessor.process(IPProcessor.java:106)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processTarget(WebflowExecutorImpl.java:1155)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:673)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNode(WebflowExecutorImpl.java:688)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.gotoNextNode(WebflowExecutorImpl.java:611)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:474)
at com.bea.portal.appflow.PortalAppflowHelper.invokeWebflow(PortalAppflowHelper.java:139)
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:124)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doPost(WebflowServlet.java:213)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2459)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"Daniel Selman" <[email protected]> wrote:
Please post the exception stack trace.
Thanks,
Daniel Selman
"Stig Boye Andersen" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I'm having problems when I try to add the out-of-the-box portlet
called
"World
News" to a portal of my own. Have anyone had problems like that?
More specific I'm getting an XML parsing exception when I add the
world
news to
my portal. It is strange because the portlet look ok at first but
when
I
try to
select some news source I don't see any of the news afterwards.
Hopefully someone can help my
Stig

Out of the box macbook pro 15" c2d problems

evening all,
right out of the box, i have had kernel panics every time i boot my new macbook pro c2d. i have also had the awake from sleep problem some people seem to be having. i am also unable to install either boot camp, parallels, or vmware. i have tried winxp, 2000 and vista in every combination. every time i try it corrupts the volume beyond repair and i have to wipe the hard drive and reinstall os x. i am getting worn out by banging my head against the wall. i thought this stuff was supposed to be easy. when i went to check on the firmware version for my macbook pro 15" c2d i noticed that i have the boot rom version and the smc version installed for original 17" macbook pro not the c2d version. it won't let me change the firmware back to a 15" c2d. it is showing MBP12.0061.B03 1.5f10 and i should have MBP22.00A5.B00 1.12f5 according to apple specs.
i will try to reset my smc, but the pram can not be reset via the usual keyboard combination because it just doesn't work like it did on my powerbook.
i am also going to try disabling the hibernate mode as suggested via terminal.
i am going to try trashing the plist preferences for the .AutoWake, PowerManagement and the systemuiserver.
i also have the problem when reinstalling os x several times that the optical drive gets stuck reading the original system disks and i have to start all over again. whew!!!
btw, i am a hardware tech but this is too much of a waste of time.
any other suggestions are very welcome.
macbook pro 15" c2d Mac OS X (10.4.9) tricked out powerbook 15"

here is an update for everyone, or at least you will get a good laugh out of it. I sent the macbook to applecare to be fixed and I just got it back. they replaced the harddrive and restored the os.
guess what? I turned it on and it had a kernel panic! then I tried to set up a user account and it had a ......... kernel panic! I had to laugh, what else can you do at this point?
they didn't fix what i told the tech support guy was the biggest issue on this machine. the boot room version is still MBP21.00a5.B01 which is for the 17" C2D. it is paired with the smc version 1.12f5 which is the version apple has listed for the 15" version. tried to change the boot room but it tells me it does not need the correction. everyone knows best yet i still get ....... kernel panics.....! lmao
here is the last kernel panic log if anyone is interested:
Wed Apr 18 13:35:56 2007
panic(cpu 0 caller 0x001A3135): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x0a124a48, CR3: 0x00c85000, CR4: 0x000006e0
EAX: 0x0a124960, EBX: 0x02cd7008, ECX: 0x0000e070, EDX: 0x00000000
CR2: 0x0a124a48, EBP: 0x13dfb879, ESI: 0x0253ac00, EDI: 0x00000000
EFL: 0x00010203, EIP: 0x2a5dcb57, CS: 0x00000008, DS: 0x56b50010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13dfb678 : 0x128d08 (0x3c9afc 0x13dfb69c 0x131de5 0x0)
0x13dfb6b8 : 0x1a3135 (0x3cf7b0 0x0 0xe 0x3cefe0)
0x13dfb7c8 : 0x19a904 (0x13dfb7e0 0x0 0x989607 0x0) Unaligned frame
Backtrace terminated-invalid frame pointer 0x13dfb879
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
Wed Apr 18 14:06:31 2007
panic(cpu 1 caller 0x001A3135): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0xd8505ed5, CR3: 0x00c85000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0xd8505ec1, ECX: 0x02bc806c, EDX: 0x02c4e6e8
CR2: 0xd8505ed5, EBP: 0x13ea3df8, ESI: 0x000e0000, EDI: 0x00000000
EFL: 0x00010282, EIP: 0x0017e42a, CS: 0x00000008, DS: 0x02c30010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13ea3bd8 : 0x128d08 (0x3c9afc 0x13ea3bfc 0x131de5 0x0)
0x13ea3c18 : 0x1a3135 (0x3cf7b0 0x1 0xe 0x3cefe0)
0x13ea3d28 : 0x19a904 (0x13ea3d40 0x2d18b88 0x2c8fba0 0xe)
0x13ea3df8 : 0x1607c1 (0x2c4e6e8 0xe0000 0x0 0x1)
0x13ea3f48 : 0x1a33a8 (0x11b9c80 0xa35a3000 0x0 0x1)
0x13ea3fc8 : 0x19a834 (0x2bd3c40 0x0 0x10 0x0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff5f8
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
macbook pro 15" c2d Mac OS X (10.4.9) tricked out powerbook 15"

I have a new iPad2 - just out of the box. Everything works, except I cannot download or update applications. It will not accept my password. My iPod will accept the password. What might the problem be?

I have a new iPad2 - just out of the box. Everything works, except I cannot download or update applications. It will not accept my password. My iPod will accept the password. What might the problem be? Any ideas?

Brock8821-
Use iTunes on your computer. With the iPad connected, sign into your Apple account and check for updates.
Doing this should straighten out the problem.
Fred

MSI Media Live problems out of the box! :(

Similar Messages

Maybe you are looking for