MSI Mega 180 USB 2.0 Problems?!?

I have the MSI Mega 180, I have enabled USB 1.1+2.0 in the bios and also have installed Windows XP SP1. In device manager, I see 'enhanced PCI to USB host'.
With all that being said my External HD refuses to be recognized as a Hi Speed Device. On another machine, the same external HD works with no problems at 2.0 speeds.
Does anyone have any clues as to what I need to do to get USB 2.0 speeds? I get Hi-speed device plugged into non-hi speed hub?!?!
any help would be schweet.

I believe the "Enhanced" indicates the USB 2.0 because that's what I have on other boards with USB 2.0 as well. Prior to XP SP1 and on Windows 2k SP3? my boards didn't have the "Enhanced" addition. Also, as I don't think I mentioned, prior to playing with the bios I had problems with the USB->Serial adapter. If I removed the USB-to-serial adapter, the system booted fine and I would replug it. After playing with the bios, this is no longer a problem and I leave it connected. The stall happened when I had the adapter in front or rear USB ports, so not a speed issue (hey, it's serial) but more a recognition issue I believe (my mouse is fine, and as mentioned above an external HDD was found fine...). Try the bios settings I mentioned as well as checking each line of each subcategory and check that all is well. Let us know if that solves it.

Similar Messages

MSI Mega 180 problems

Hello all, i'm quite stuck on something and need some help.
I have recently purchased an MSI Mega 180 deluxe and installed an pioneer a07 dvd writer in there, for some reason it won't let me burn cd's in audio cd format from wav files, which i need for my music studio.
Also i constructed an external case to put an internet pioneer a03 dvd writer and did the same process and believe it or not i was able to burn a audio cd, so not sure what the problem is, could the msi mega 180 dislike my newer model of pioneer, or is the pioneer on it's way out, which i find strange as it's newer and quite new.
I use nero to burn most of my cd's or dvd's which had no problem with when the dvd writer was on another desktop, it seems to get up to 26% and just freezes there, which the buffer level not moving at all.
Hope someone can help, thanks

Sounds like all of your drivers are not up to date....
Here's what M$ has to say about it (shamelessly copied and pasted from another different website/board post).
Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL
The Stop 0xD1 message indicates that the system attempted to access pageable memory using a kernel process IRQL that was too high. Drivers that have used improper addresses typically cause this error.
Interpreting the Message
This Stop message has four parameters:
Memory referenced.
IRQL at time of reference.
Type of access (0x00000000 = read operation, 0x00000001 = write operation).
Address that referenced memory.
Resolving the Problem
For additional troubleshooting suggestions that apply to all Stop errors, see "Stop Message Checklist" later in this appendix.
Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.
For more information about Stop 0xD1 messages, see the Microsoft Knowledge Base link on the Web Resources page at http://www.microsoft.com/windows/reskits/webresources. Search using keywords winnt, 0x000000D1, and 0xD1.
Update Drivers
Updated and comaptiable drivers are very important when running XP. Check your hardware with the HCL http://www.microsoft.com/hcl If you hardware is not on the list it does not mean it won't work it just means it hasn't been tested by Microsoft and they won't Guarantee it to be compatible. If it not on the list check the manufacturer's website fo an up to date XP driver, if they don't have one you may be out of luck. This goes for motherboards and the bios too.

New MSI Mega 180: Some problems...

I've just bought a new MSI Mega 180... and I've come up with some problems:
I can't get the radio to be detected in windows... not sure why. When I load, radio webupdate, it comes up with: Cannot find radio module.
I can't get into the Wireless configuration monitor. If you select Gateway or AP mode, and then hit configure, it comes up with a pw prompt, and I can't find what to put in there... that's driving me nuts...
When I'm running windows, the front panel is compleatly black, should it be showing anything?

Quote
When I'm running windows, the front panel is compleatly black, should it be showing anything?
The clock should be on or if you installed PC Alert it would show the CPU temp. and stuff like that. I think media centre 3 shows something on the display (I can't get it installed)
Can't answer your other questions.

Logitech USB30 Headphones and Logitech WebCam Pro 4000 vs MSI Mega 180 Deluxe

Hi!
I just found some problems related to the radio software/driver on my MSI Mega 180 Deluxe. I have installed all the latest software / drivers from MSI (including the bios) and i am using Windows XP Pro with Service Pack 2 installed.
The problem is that when i connect my Logitech USB30 headphones to this computer, and try starting the Radio application from MSI, i get an error mesasage saying there is no audio driver installed. And there is no sound at all. The USB headset is working 100% in all softwares like Windows Media Player and other sound applications (not related to MSI). I sent a support request to MSI, and they told me that this problem was related to my headphones. I did not accept that answere, because it does not make sense.. my headphones works perfect with any other computer and with any other software.
Then i connected my Logitech WebCam Pro 4000 to this computer (incl. the drivers) and the very same thing happened..The radio application told me there is no sound driver availible and the Listen Music application crashed by it self. The control panel now shows that there is no driver installed.. but when disconnecting the WebCam and reboot, the driver is ok again.. and the same thing happens when connecting the WebCam again.
Does anyone else got this problem, and did you solve it? How?

I don't have MSI radio installed, never have. However, does MSI Radio provide tuner capabilities? The ability to get radio stations? If so, then perhaps whatever is providing the tuner capability is maintaining an IRQ that conflicts with the USB Headset and WebCam?
That's just a hypothesis. Typically, when you have a IRQ conflict, you won't lose the driver in your Device Manager. However, since everything in the Megas are USB driven, then there's a possibility that you would.

MOVED: Need help with msi mega 180 + athlon xp-m combo

This topic has been moved to Overclockers & Modding Corner.
Need help with msi mega 180 + athlon xp-m combo

AFAIK, you shouldn't need a pinmod for a Mobile Athlon XP CPU to work in a nforce2 mobo
did you have any other CPU installed prior to this one? if so, refer here to clear the CMOS: Clear CMOS Guide
next, refer to your manual, or download from MSI, for location of the FSB jumpers; ensure J8 is shorted across pins 1-2, and J7 is shorted
finally, enter your BIOS setup menu, and under Advanced Chipset Features, set CPU FSB to 133mhz (or even 166mhz if you have DDR333 memory). the only thing i can't see in the Mega 180 manual is where you set the multiplier...
which is where the BIOS has limited overclocking features, and you might have a problem here
i think i'll pass this over to the Overclockers forum, where someone may be able to give a better answer....

Poblem with software to msi mega 180

hi, I have bought a Msi mega 180 with amd.
i have installed the software. mega deluxe 3.
Everything is working fine,but when i try to listen to music via, multimedia part, the program crash. when i press ctrl+alt+del i got the error program not respondinging.
I have reinstalled the program 3 times but i still have this problem.

Thanks for posting the link AtHoSsIcO. I still have the same problem, even with the new software. I have downloaded the lastest drivers
Audio driver version 4.31 (WHQL)
Audio utility version 4.31
Ethernet driver 3.39 (WHQL) + TOT.nvu
GART driver 3.43 (WHQL)
MemCtl driver 3.38 (WHQL) + TOT.nvu
SMBus driver 3.43
WinXP IDE 2.5 driver version 4.12 (WHQL) + updated nvuide.exe and txtsetup.oem
Installer version 4.31
I have installed the latest version (45.3), but I still get the same thing, I click on music and 'loading' in green writing appears in the left hand top corner, then nothing loads and the program crashes and I have to press ctrl alt delete to get out of it. The green writing that appears is very similar to when I use special funtions on my logitech cordless keyboard, not sure if the 2 are related. Any idea what could be causing the crash?

MSI 945gz-f USB 2.0 Problem

Good day! I'm facing a problem with my MB MSI 945GZ-f USB 2.0 problem. I try to upgrade and downgrade the BIOS but still no help. Still i can't use the USB 2.0 feature of my MB, Is there anyone here facing same problem and can help me? I'm using windows xp SP2. Thank you very much!

I try to used backside and front usb slot, but still show me that i am not running with 2.0. Even in device manager There is no enhanced host controller. I have 2 MB same model, and I solved my problem with my 1 MB, solution I tried to downgrade the BIOS version but the other one Still no help. Also tried to update my Intel inf software but still cant find the enhanced Host controller. Please kindly help me with this problem. Thank you and more power!

MSI Mega 180 - Install of HomeTheatre software

I've finally got the MSI Mega 180 kit up and working here. However, when I go to install the Home Theatre it prompts me for a serial #. I've went through the entire box for this serial #; and have yet to find it. Any one know a way to get this serial #? The kit kind'a sux without it.

Thanks for your help.
Brent92663's suggestion about the memory got me thinking. I didn't have any other 100mhz memory (PC2100) so I kept my 133mhz (PC2700) memory in, but changed the settings in the BIOS so it operated at 100mhz, and it now works fine!
(If anybody wants to know how todo this, let me know).
Very strange....
I have yet to try it with the normal settigns, but it is something todo tomorrow!
Thanks a lot,
Nick.

MSI MEGA 180 - Installing WinXP Pro

I have been reading the various posts on the MSI MEGA 180 and it seems evehas had a lot of eperience with them!
I have bought one, and have tried installing Windows XP Pro on it, and this is where it all goes wrong.
I start the installatiuon process, go through the text-only bit, and get to the graphicy bit. Then, the process either just freezes, or comes up with the blue screen of death with a STOP error, usually IRQL_NOT_LESS_OR_EQUAL.
I have tried the MS Knowedgebase KB314063 which suggests changing the power settings, but have had no luck with that.
Here is my spec:
-MSI MEGA 180
- W6796MS V3.3 121003 18.25.07
-AMD Athlon XP 1800+
- 1 x 512mb RAM PC2700
Many thanks in advance,
Nick.

Thanks for your help.
Brent92663's suggestion about the memory got me thinking. I didn't have any other 100mhz memory (PC2100) so I kept my 133mhz (PC2700) memory in, but changed the settings in the BIOS so it operated at 100mhz, and it now works fine!
(If anybody wants to know how todo this, let me know).
Very strange....
I have yet to try it with the normal settigns, but it is something todo tomorrow!
Thanks a lot,
Nick.

MSI Mega 180 Suddenly died

Hi!
Last night I was using my MSI Mega 180 as normal, and shut it down after use, and got to bed.
The next day, the machine refused to boot. When I pressed the power-on-button the pc the fan went round once then stopped and it didnt boot.
The HIFI-mode and clock still works, but dosen't start the PC at all. I tried to connect a normal ATX power supply to the machine, and everything was working again (except hifi-mode of course)
Can anybody explain this ? Is the quality of the PSU THAT bad ?
I am VERY dissappointed. I guess i have no warranty, as I have reversed the CPU fans (and some other modifications, like removing the unused HDD-tray).
Where can I get a replacement PSU ? Is it worth it, or should I stay with my "external" ATX 350W (And much cooler and less noise than the orginal MSI MEGA 180 PSU)
The only downsides with the external PSU is :
1. I have no Linux webserver no more (Took the PSU from there)
2. No Hifi-mode or clock
3. Dosen't look as good as the original.

I think all mega 180 units comes with 2 years manufacturers guarantee...
even if it's over 2 years, i have seen someone in this forum said that the psu from msi is only 35 quids?
I think you should try resetting your bios by jumper to see if that works

Msi Mega 180 Gaming Problems

Hi,
I having problems playing games on my MEGA 180. Everytime I play a game, after 5 to 10 minutes it just stops and goes back to desktop! Sometimes, I get the blue screen of death instead saying (basically) -
A problem has been detected and windows has been shut down......................
DRIVER_IRQL_NOT_LESS_OR_EQUAL
Technical information:
*** Stop: 0x000000D1 (0x2A200003, 0x00000002, 0x00000001, 0xF7B9606B)
*** USBPORT.SYS - Address F7B9606B base at F7B7D000 Datestamp 3d6ddc31
Does anyone know what this means and / or why my PC refuses to play games for more than 10 minutes? Everything else works and runs fine untill it comes to games. The blue screen of death only happens when the graphics card is in. Anyway, heres my spec -
MEGA 180
Athlon XP3000+
Crucial 512mb DDR333
MSI Geforce FX5200 T128
Seagate 120gb hard drive
MSI DVDRW
Standard heatsink, fans, power supply etc.
XP pro with sp 1 & 2
Please help!!
Thank you,
Neil.

Sounds like all of your drivers are not up to date....
Here's what M$ has to say about it (shamelessly copied and pasted from another different website/board post).
Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL
The Stop 0xD1 message indicates that the system attempted to access pageable memory using a kernel process IRQL that was too high. Drivers that have used improper addresses typically cause this error.
Interpreting the Message
This Stop message has four parameters:
Memory referenced.
IRQL at time of reference.
Type of access (0x00000000 = read operation, 0x00000001 = write operation).
Address that referenced memory.
Resolving the Problem
For additional troubleshooting suggestions that apply to all Stop errors, see "Stop Message Checklist" later in this appendix.
Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.
For more information about Stop 0xD1 messages, see the Microsoft Knowledge Base link on the Web Resources page at http://www.microsoft.com/windows/reskits/webresources. Search using keywords winnt, 0x000000D1, and 0xD1.
Update Drivers
Updated and comaptiable drivers are very important when running XP. Check your hardware with the HCL http://www.microsoft.com/hcl If you hardware is not on the list it does not mean it won't work it just means it hasn't been tested by Microsoft and they won't Guarantee it to be compatible. If it not on the list check the manufacturer's website fo an up to date XP driver, if they don't have one you may be out of luck. This goes for motherboards and the bios too.

MEGA 180 USB Problem

Anyone else have this problem? I recently built a MEGA 180, installed WinXP home, SP1, all the drivers, etc. and the machine ran fine with no problems for a couple of weeks. However, one day when I booted up, my USB mouse no longer worked. In fact, none of my USB devices work. I realized that my front and rear USB ports are all dead. The devices (printer, scanner, mouse, keyboard) all still work in my other PC. Under Device Manager USB Controllers it does now say "Unknown Device". It says this even when I have no USB devices hooked up.
I've tried reinstalling the motherboard drivers, checking all the physical connections on the board, I've even reformatted the hard drive, reinstalled XP and all the drivers and I still have the same problem.
Is my USB bus burnt out? Is the motherboard defective? I've built over 20 computers and I've never had this problem before.
Any help or ideas will be apprecieated!

I just RMA'ed the MEGA 180 - $25 shipping UPS, YIKES!!! And that's not even their 3 day service.
My customer is very upset with me regarding this machine. I built it and tested it, like I do all my customer's machines. Then it started getting buggy, things started acting weird, I lost the USB bus, then it stopped booting all together. I've spent countless hours troubleshooting it, it just goes on and on. I usually build mid to full tower machines and always with ASUS boards and I've yet to ever have a problem. The things build fast, run rock solid, and never give me a problem.
However, this customer saw this machine on Tomshardware.com, fell in love with it, and just had to have it and against my better judgement, I agreed to build it. Now I'm deep in the hole on this thing. If you build PCs for a living, DO NOT BUILD YOUR CUSTOMER A MEGA 180!!!!!! You'll live to regret it. I"m thinking of just buying a new case and stuffing all her parts into it and calling it even.
However, if you don't mind beta testing something (at your expense) and you don't mind loading drivers, reloading drivers, erasing the drive and starting over again, trying to get things to work, getting things to work, have them stop working, etc then this machine is for you. Me, I think I would rather just hit my head with a hammer.

MSI Mega 180 Deluxe: "No Audio Device" problem

MSI PC 180
AMD Athlon XP 2600
2 x 256 Mb DDR 333 Kingston
MSI TV Card
1 HD Maxtor
1 LG DVDRW
Windows XP SP2
Norton Antivirus 2004
The computer workest fine until today: now there is no sound.
The device manager show
- NVIDIA NForce Audio Codec Interface
- NVIDIA Nforce MCP Audio Processing Unit
Correctly without yellow o red marks
However in Control Panel , Audio Devices appear: "No Audio Device"
When click in Nvidia Mixer say that there are no audio device
I upgrade to the latest Nvidia unified drivers with the same result
What happen? How i can have sound again?
Regards,

Thank to everybody for the answers
I have reset the clock and the problem continue
I have uninstall the newest drivers (downloaded from nvidia web) using Add/remove programs, and reinstall using original CD from MSI, and the problem continue
The problem is not temperature. The sound is disabled after hours of computer is off.
I unplug the power and the problem continue
Now i have the following audio drivers:
- Nvidia Audio Codec 6.14.348.2
- Nvidia MCP Audio Processing 6.14.348.2
The problem is: The Windows XP detect the integrated NVIDIA sound card and install the drivers but in Control Panel show: No AUDIO DEVICE. And the sound is off...
My conclusion is MSI PC 180 is very weak: the integrated components are very unstable.
I'm computer assembler and i discontinue to sell this MSI equipment.
I'm very annoyed with MSI quality.

MSI Mega 180 minimum Vcore?

Hello!
I searched in the whole internet for my question, I also called MSI germany, but nobody could give me an answer of my question.
So I hope to find an the answer here in this specific forum...
If anyone has this barebone, it's really an easy answer:
Normally, the most of Nforce2 boards could adjust 1,1V Vcore min. in the BIOS.
Whats with the Mega 180? Can I adjust the Vcore to 1,1V in the BIOS?
thanks in advance!
Jan

I believe the "Enhanced" indicates the USB 2.0 because that's what I have on other boards with USB 2.0 as well. Prior to XP SP1 and on Windows 2k SP3? my boards didn't have the "Enhanced" addition. Also, as I don't think I mentioned, prior to playing with the bios I had problems with the USB->Serial adapter. If I removed the USB-to-serial adapter, the system booted fine and I would replug it. After playing with the bios, this is no longer a problem and I leave it connected. The stall happened when I had the adapter in front or rear USB ports, so not a speed issue (hey, it's serial) but more a recognition issue I believe (my mouse is fine, and as mentioned above an external HDD was found fine...). Try the bios settings I mentioned as well as checking each line of each subcategory and check that all is well. Let us know if that solves it.

MSI MEGA 180 Deluxe - Card Reader

Does anyone have any advice on getting the card reader to work?
It was working untill I installed all the software from the install disk. Then I rebooted and it had stopped working.
I have since done a complete fresh install, but still have the same problem.
Not really conversant with BIOS settings, so don't know what they should be.
Have installed all updates for the Mega 180 from MSI website, and also have ALL updates from microsoft. (All 110MB !!!!! Thanks god for broadband!!)
Any help would be greatly appreciated.

Go to bios, and check in Itegrated Pripherals->Onboard Devices->OnChip USB.
This must be enabled. I have there V1.1+V2.0, and cardreader is working.
I was disabled this, when i installed WinXP, because cardreader start from drive C: and my HDD was like drive F:. So I disabled it, installed WinXP, and then enabled OnChip USB. Now i have A: (virtual drive) C: (Hard Drive) E: (DVD/CD-RW) F: and G: (CardReader).
Best Regards from Czech

MSI Mega 180 USB 2.0 Problems?!?

Similar Messages

Maybe you are looking for