MSI MEGA PC parts
Hello, I just got a MSI mega pc and I was wondering what i needed to buy to make it work. I heard you can only buy msi made optical drives to work in the multimedia mode, is that true? I bought a MSI D16 16x dvd drive, would that work? I can't seem to find the cdrw-dvd combo drive anywhere yet, do you have a link for that? I can't find a good tv tuner card either, I saw a msi mega tv tuner card and also 2 tv anywhere cards from msi, which one should I get? And which video card should I get? I'm looking at the msi vtdr-5600 because it is cool and quiet, which is good for the mini pc, but I don't really need a tv in if I'm going to get a tv tuner, do I? Thanks
Hey, thanks for the reply, so i should be able to use any cd drive to work the cd player and mp3 right? Since i don't need the video in if i'm getting the tv card, what video card should i get? I want something that I can play games on but also quiet and not too hot, any suggestions? I also bought corsair 512 pc3200 memory, the MEGA only uses 2700 i think, will the pc3200 work with it? Can i also put a 2.4 800mhz bus hypertreaded cpu and use it at 2.4? The MEGA only has a 533 bus, which hyperthreaded cpu's can be used? Thanks
Similar Messages
-
Hi,
I have been having for a few years the MSI Mega PC 651, from a few days it works only in way HIFI but in way PC doesn't work anymore.
I have read on this forum that the problem is the PSU, but it seems that cannot be found.
I have contacted both MSI Italy and MSI global, nobody has responded me.
What must I do?
Do I throw the Mega PC away?Quote
This PSU is also climbed on on other barebone as the Scaleo C of Fujitsu-Siemens, part number FSP:350000145.
That is correct, as I recall MSI made this barebones for Fujitsu-Siemens based on the Mega 651. -
MSI Mega series girder plugin version 2.0 available
Hallo
EDIT:
There is a new version out: check here for details of the version 2.
I'm proud to release the first version of my MSI Mega series plugin for girder 3.2. Thank for all the reported bugs :-). I implemented a new feature to set the time resolution of the remote control. People with the new firmware will enjoy the gained flexibility. Current version is 1.0.0.70.
Where to get the plugin?
The plugin can be downloaded from my webpage. Check out http://n.ethz.ch/student/nschmid/MSIStuff for details :-) - [See note below]
Which hardware is supported?
MSI MEGA series front IR controller. It has been tested with MSI MEGA 180/865/651.
What software do I have to install to use the plugin?
Girder version 3.2. Buy it at http://www.girder.nl ~20$
DLLs: MSIDrvIF.dll, ForMpc.dll. They come with MSI MediaCenter III Deluxe. Search for it.
How do I install it?
Copy "MSIGirderPlugin.dll" from the "bin" directory into your girder plugin folder.
Copy "MSIDrvIF.dll", "ForMpc.dll" from your MSI Media Center III directory into the girder folder.
What does it cost?
Of course nothing.
How to report bugs?
Check out the webpage for details.
I hope you enjoy it. Developing will go on :-)
Best regards
Nathan
EDIT by Stu: The plugin is now attached to this post and can be downloaded from here now. :hat tip:
[ ERROR: SPECIFIED ATTACHMENT MISSING ]Sure.
You have to install MSI Media Center because it installs the driver for the plugin. The required DLLs are not sufficient because ForMpc.dll need mpcsys.sys and assosciated files. I couldn't figure out all the dependencies but with the installation you got all you need.
1.) Now you can launch setup.exe and it should install everything automatically.
If that don't work: Copy MsiDrvIF.dll and ForMpc.dll form your Media Center installation into the girder directory (normally C:\Program Files\girder) and MSIGirderPlugin.dll from my release into the girder plugin directory (C:\Program Files\girder\plugins). That's the system part.
2.) Now launch Girder and open settings. In the plugins tab search for the "MSI Mega series" entry in the list. If it's not listed you did something wrong into step 1. If it is listed check the checkbox left of the plugin. Then also check "Auto Enable Input device". Restart girder.
Create a new command (CTRL+ALT+A) click on it and on the right side of the window select the Plugins tab and click there on MSI mega series. Then click on Settings. As Time resolution enter 250 (a quarter second - depends on firmware of Bluebird VL+). As model select your model. Press on OK.
Restart girder - your settings will apply.
3.) Now when girder is opened again you can press the remote and check if the LED on the right side of the status bar changes color. If that is so everything is ok. If not: Check all steps again.
4.) If you want to launch my sample configuration: Go to girder website and download the Popup OSD plugin by Mark Fiechtner and install it as written in the readme file of Popup OSD. Launch girder and go to the plugins tab in the settings. Check AlarmTimer and Popup OSD there. The sample file should work now. Unfortunatly you have to rerecord some of the makros because the version of winamp or PowerDVD are perhaps not the same as in my computer.
For this stuff please post in girder forum. I don't support the sample file.
Hope that helps
Regards
Nathan -
Poblem with software to msi mega 180
hi, I have bought a Msi mega 180 with amd.
i have installed the software. mega deluxe 3.
Everything is working fine,but when i try to listen to music via, multimedia part, the program crash. when i press ctrl+alt+del i got the error program not respondinging.
I have reinstalled the program 3 times but i still have this problem.Thanks for posting the link AtHoSsIcO. I still have the same problem, even with the new software. I have downloaded the lastest drivers
Audio driver version 4.31 (WHQL)
Audio utility version 4.31
Ethernet driver 3.39 (WHQL) + TOT.nvu
GART driver 3.43 (WHQL)
MemCtl driver 3.38 (WHQL) + TOT.nvu
SMBus driver 3.43
WinXP IDE 2.5 driver version 4.12 (WHQL) + updated nvuide.exe and txtsetup.oem
Installer version 4.31
I have installed the latest version (45.3), but I still get the same thing, I click on music and 'loading' in green writing appears in the left hand top corner, then nothing loads and the program crashes and I have to press ctrl alt delete to get out of it. The green writing that appears is very similar to when I use special funtions on my logitech cordless keyboard, not sure if the 2 are related. Any idea what could be causing the crash? -
Hi just wondering if anyone knows if the MSI Mega Sky Aerial is weather proof.....
please reply.Yes, i have coverage. I wrote, that with default aerial i have around 65/15 signal. I am few km (maybe 5km) from broadcaster (i found thiw word in dictionary, hope is ok) and i can see it (no obstacles in way).
As i wrote, if i use default antenna, i have bad signal, so sometimes i have drop-outs and "colored squares".
If i use any other antenna, signal is worst than bad, can't tune anything.
Of course i tryed moving with aerial, every place when aerial can stand.. I am trying this around 3 months!
I asked in some local forum, if anyone tested dvbt here. They answered to me something like this: yes, works perfectly.
But noone have MegaSky 580 (some internal pci cards, pcmcia cards, some usb keys from pinnacle or hauppage or technisat or other), but few of them using same aerials, that i bought (smaller passive Technisat or bigger Technisat with ampfilier)!
So, from my eyes looks like MegaSky 580 is "not very successful product".
If you have any hint what other i can do, so say it. But i think i tryed anything.
And i'm not saying about horrible software called PrestoPVR - "Blue screen of death" is every day when i trying to use it..
I have one more thing. I found, that is two different models of MegaSky 580 (different producer or technology, different drivers, different sign).
First is "DTV USB MINI" and second is "PC-DTV Receiver". I have "DTV USB MINI".
If you don't trust me, look here (driver download): http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=624&kind=6
Maybe is "DTV USB MINI" model crap and MSI started to produce new version with differend technology..
Anyway, my MegaSky 580 is really unusable.
(p.s. sorry for my bad english, i'm not a native english speaker) -
MSI Mega Stick 1 problem with Nforce 2? Look here
I love this stick, so I didn't give up to find a solution. With SP 1&2 it freezed when there is data communication. Now it's gone how?:
Flash the latest firmware of Mega Stick II to your Mega Stick I
After installing MSI driver, it freezed againActually i am having this problem also. Msi mega 256mb mega stick is not compatible with abit mobo NF7-s as i had tried to use it with other computers which is using nf7-s mobo also. But it comes to normal when i plug it into my my housemate computer which is not using nf7-s mobo. I am wondering of how to solve this problem for long long time already. Can anyone tell me how to solve it? Even i had updated the firmware to the newest but the problems still occur.
-
Hello. Can you please tell me which DVD writer I need to buy for my MSI Mega 865. I want to add a DVD writer behind the panel and my third party Sony doesnt open the front panel. Do the MSI drives work OK. Thanks.
Hi williac10,
Though you are right in asking for a better alternate optical drive here but I think it'll be better if you ask the Mega PCs users in our Mega PCs, SFF PCs Forum . -
PRoblem w/ MSI MEGA TV OUT-CARD
Msi 865 Tv Out not working
i just got the msi mega TV out card for my Mega 865 today, i installed it.
Plugged in an AV cable, connected it to the TV and NOTHING!!!
Has anyone else installed one , if so when you installed it did windows recognize it as new hardware ?, because mine did not,and i found that odd.it should recognize it as new hardware right ?. I dont know if the TV out Card is faulty or if something esle is wrong ???? suggestions pls" but in the VGA driver properties where you select the output devices (once you install the driver) the option to enable the TV should become available. "
The VGA drivers for the intel extreme G2 that came with the msi 865. "intel 845G/865G VGA DRIVER" are installed.
i'm running xp pro.
where do i find the driver properties, you mean the extremeG2 properties right ?>in the device section it only shows monitor . i do not see any option for tV
i went to intel 82865g graphic controller prop. > i checked devices , and i went to drivers, all installed but i see no TV option ??? would it be an Icon >>>>
am i doing something wrong ??
sorry if i'm a little so, thanks for the help -
MSI Mega Player 536 VIDEO FILES...
Hi allllz....
i have the new MSI Mega Player 536 and i have some QUISTIONS plez help me to fix it....
1- WHY in the product menu in MULTIMEDIA we found an Video folder ?? is it really that MSI Mega Player 536 able to play VIDEO files ???
2- IF YES !!! so,what type of files that can be played on the MSI Mega Player 536 ?
3- how can i but/convert some Video files i own in my PC in the MSI Mega Player 536 to play it ? (what program and codec to use)
4- i tryd the camtasia movie converter to make a movie to play on the MSI PLAYER put i only saw a BLACK SCREEN flashing and closed again !! why ?
and thats the MOVIE PROPERTIES :
Video Codec: MJPG_MainConcept Video V3.2.4
Colors: True Color (24-bit)
Frame Rate: 15
Size: 320x240
Audio Codec: PCM (uncompressed audio)
Audio Format: 22050Hz, 16 Bit, Mono, 44KB/s
i wish u can help me... i just want an easy way to PLAY VIDEOS on my player 536...
thnx...
waiting replyz...
5536 and 5540 can playback avi and .mov video files, but these files codec must be M-JPEG format!!
Please attention: 5536 didn’t playback MP4 or WMV video formats, and also couldn’t reveal these files!!
“Quick Time7 Pro” and ““Canopus ProCoder Demo v1.25” converting software can support 5536/5540 video format (M-JPEG) to playback, but “QuickTime7 Pro” isn’t free, you have to purchase it, and “Canopus ProCoder Demo v1.25” is free, but only can use 30 days. Please go to below website to download it and you have to register and login!!
(http://www.canopus.com/products/demos/index.php)
When you download “Canopus ProCoder Demo v1.25”, please modify file name to “ProCoderDemo_1_25.exe”, then this file just can become execution file, after installation you have to check video and audio codec, have a little trouble, I will explain how do set M-JPEG codec!!
When you perform “Canopus ProCoder” software, you will find out “Source”, “Target” and “Convert” selection, please go to “Source” and add which video you want to convert, next please go to “Target” and choose “Add” selection, then choose “QuickTime file” in the basic, after that, you will detect “Target Parameters” on the right, please according to below codec format to set, finally, please go to “Convert” selection to begin converting!!
Video setting:
Width: 320
Height: 240
Frame Rate(fps): 10.000
Interlacing: Non-Interlaced
Aspect Ratio: Video: [4:3], Pixel: [1:1]
Encoder: Apple Photo JPEG or Apple Motion JPEG A
Codec options: Click for Codec Properties
Audio setting:
Channels: Stereo
Sample Rate(kHz): 11.025
Bits / Sample: 16
Encoder: 16-bit Big Endian
Codec options: Click for Codec Properties
By the way, You can select another sample rate parameter on the audio setting, but you can only choose 10.000 frame rate (fps) on the video setting, this value will influence whether can playback after converting video, so this setting is very importantly!!
Please try again!! -
How to install BDA-drivers correctly to MSI Mega Sky 580 dvb-receiver
Hi,
I tried to use MSI Mega sky 580 dvb-receiver with DVBViewer program. It should work because both have bda-driver support. But DVBViewer says "No hardware found". I think the problem is that the bda-drivers of the MSI stick are not installed correctly. I have downloaded the newest drivers and installed them. I read in a forum that the bda-drivers must be installed separatelly in device manager. I tried but it didn't work. I have Windows XP pro, AMD athlon XP 2600+ and Asus A7N8X-E motherboard. Presto-player works well.I’m not sure what do you mean.
The product I have is this: http://www.msi.com.tw/program/products/multimedia/mut/pro_mut_detail.php?UID=615
And the drivers I used can be found here: http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=624&kind=6
Actually I’m not sure which driver is the right one. Please ask if any relevant information is missing. -
Hello all, i'm quite stuck on something and need some help.
I have recently purchased an MSI Mega 180 deluxe and installed an pioneer a07 dvd writer in there, for some reason it won't let me burn cd's in audio cd format from wav files, which i need for my music studio.
Also i constructed an external case to put an internet pioneer a03 dvd writer and did the same process and believe it or not i was able to burn a audio cd, so not sure what the problem is, could the msi mega 180 dislike my newer model of pioneer, or is the pioneer on it's way out, which i find strange as it's newer and quite new.
I use nero to burn most of my cd's or dvd's which had no problem with when the dvd writer was on another desktop, it seems to get up to 26% and just freezes there, which the buffer level not moving at all.
Hope someone can help, thanksSounds like all of your drivers are not up to date....
Here's what M$ has to say about it (shamelessly copied and pasted from another different website/board post).
Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL
The Stop 0xD1 message indicates that the system attempted to access pageable memory using a kernel process IRQL that was too high. Drivers that have used improper addresses typically cause this error.
Interpreting the Message
This Stop message has four parameters:
Memory referenced.
IRQL at time of reference.
Type of access (0x00000000 = read operation, 0x00000001 = write operation).
Address that referenced memory.
Resolving the Problem
For additional troubleshooting suggestions that apply to all Stop errors, see "Stop Message Checklist" later in this appendix.
Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.
For more information about Stop 0xD1 messages, see the Microsoft Knowledge Base link on the Web Resources page at http://www.microsoft.com/windows/reskits/webresources. Search using keywords winnt, 0x000000D1, and 0xD1.
Update Drivers
Updated and comaptiable drivers are very important when running XP. Check your hardware with the HCL http://www.microsoft.com/hcl If you hardware is not on the list it does not mean it won't work it just means it hasn't been tested by Microsoft and they won't Guarantee it to be compatible. If it not on the list check the manufacturer's website fo an up to date XP driver, if they don't have one you may be out of luck. This goes for motherboards and the bios too. -
MSI MEGA 533 with FM Radio won't connect on USB! Brand new from a box !!!
hello,
i'm having trouble connecting MSI MEGA 533 with FM Radio, on usb port on my computer.
I've tried to connect it on USB 2.0 port on laptop and desktop computer, with MS Windows XP SP2 installed, nothing happens. When I start player it works like a charm, i can listen to radio stations, record radio station, and record voice, but when i try to connect it to USB via cable from a box nothing happens.
I've tried to downgrade it to firmware version from cd, with a standard procedure, hold play button, start download software, connect via usb cable, and the player is not detected by computer.
PLEASE if there is a way you can help post your reply as soon as possible.
ThanksHi gagac
Try uninstalling the current driver on your computer and download the following driver.
http://rapidshare.de/files/20262928/MS5533.zip.html
This driver is a backup copy that I uploaded on rapidshare from my Original CD Rom that came with my player & I know that it works with firmware v1.00.06.
What I find is unusual is that you got firmware v1.00.06 on your player straight out of the box as it usually comes with v1.00.01 or v1.00.02.
If the above driver doesn't work, and since that you have Windows XP, you may want to try upgrading to firmware v2.00.02. NOTE: You will need to also download driver v1.672 from the MSI Website as this is the only driver that works with v2.00.02.
CARE: You may want to read the below topic first before upgrading to v2.00.02 as there have been some issues concerning driver v1.672 & v2.00.02.
https://forum-en.msi.com/index.php?topic=96066.0
Good Luck. -
MSI Mega Stick Russian characters support
Hello...
Can anybody help me and make MSI Mega Stick 1 (Driver 2.xx) to show Russian characters (ID tags).
Or may be anybody can describe how can i make it self (format of resource.bin or other info?)
Thanks....Firmware for Mega Stick 1/256, which can display russian fonts in ID3 tags and filenames can be downloaded from the following URL:
http://www.megastick.ru/
or
http://www.megaplayer.ru/ -
MSI mega stick 128 Shut down problem
I have a problem , I have a MSI mega stick 128 and fron a litle time it has started tu Shut down or restart rondomley. At first it hapend from time to time but now it hapends 20 times a day . It is realy enoig. If yu have an ideea PLS tel me what to do . (I changed the firmware from the original to new versions but it didn't help .) Is there any hope left ?? I am desperate . So if you have am answer to my problem pls let me know . BYE
Maybe the problem solution will be at
https://forum-en.msi.com/index.php?sid=&postid=318548#post318548 -
hello
on the msi mega stick 256 are some files before you buy it. these are for some new startscreens.
i removed them. does anybody know where i can find these or e-mail it to me on
[email protected]
thanksPlease confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
Please do according to firmware update procedure of the following:
Mega stick firmware update process: (Don't put battery)
1. Please download and install the latest firmware and driver!!
USB1.1: (firmware version v3.00.13)
(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
USB2.0: (firmware version v2.00.09)
(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
Hope to solve your issue!!
Maybe you are looking for
-
How to block the Creation of Mulitple Excise Invoice in J1IS
Hi Sap Gurs, Can any tell me how to block the System allowing to Create One more Excise Invoice in J1IS against Same GI Material Document no (Ref Trans Type:MATD) for Outgoing Materials ie:Stock Transfer from One Plant to onother Plant by Mvt Type 3
-
How can I change the view in Show Page Source from one long line to a more readable view
When using Develop --> Show Page Source in Safari 6.0.1 I get a view of the html that is just one long line. I can scroll along to the right but it is not very easy to use. It seems to me that when I first used this feature I had a formatted view, th
-
Can you create apps after 1st May 2015 using Adobe DPS single edition?
Can you create apps after 1st May 2015 using Adobe DPS single edition? I currently have SE via creatieve cloud - one of the only reasons we switched to CC was for the DPS SE. Does anyone know if this capability will just be 'switched off' at midnight
-
Universe based Crystal report date prompt appears as DateTime
I have faced this issue in all XI versions and was hoping there is a solution for this in XI 3.1 and/or Crystal 2008. There is a date dimension in a universe which is tied to a datetime datatype on the backend SQL server field. If a Crystal report (
-
Long (extended?) display output of 'ps' command
Hi, all If the path of a command is long, the output is being cut of from the output of 'ps -ef' command. On HPUX, there is a 'x' option from ps for extended display format to fix the problem. From the man page of 'ps' of Solaris, I don't see similar