Msi mega stick 1 128 error flash

I had update my bios mega stick but I had occured an error.
now when I connect the stick in usb port the pc wrote "usb not supported" the display is off.
help me please

no. it's said "usb unrecognized".

Similar Messages

  • MSI mega stick 128 Shut down problem

    I have a problem , I have a MSI mega stick 128 and fron a litle time it has started tu Shut down or restart rondomley. At first it hapend from time to time but now it hapends 20 times a day . It is realy enoig. If yu have an ideea PLS tel me what to do . (I changed the firmware from the original to new versions but it didn't help .) Is there any hope left ?? I am desperate . So if you have am answer to my problem pls let me know .  BYE     

    Maybe the problem solution will be at
    https://forum-en.msi.com/index.php?sid=&postid=318548#post318548

  • Backlight died on MSI Mega Stick 128

    My backlight stops working!!!!!!!  =\
    Does anyone else has this problem ???????
    i tried formatting it using the ulitlity software which came along, but it doesn't help.

    Hi, I have the same problem, I am using the MSI Mega Stick 256 4 months, everything worked fine so far. Suddenly the backlight died, and it cannot be re-enabled. Could it be just a software problem (Is there a firmware upgrade available?) or should I return the product and require replacement?
    Thanks.
    Lukas
    Prague, CZ

  • MSI Mega Stick 128MB Media Error

    I have a MSI Mega Stick 128MB and when i turn it on it comes up with "Media Error" - then turns off. Can anybody PLEASE help me?

    Please update latest firmware (v3.00.13) and try again!!
    Please according to firmware update procedure to do of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=485)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 128 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery before updating. (2) The step 3 is very important, please must press sustained “play key” first, then connect into your PC.

  • Mega Stick 128: Update Firmware The Says Locked

    I've got a Mega Stick 128, i got it about 2months ago, i can't return it coz it was a present from my aunty in malaysia and i live in australia. now i recently formated by mistake with the windows formatting program, now it says media error. I went to the MSI website and then updated my firmware on it with the program, it now says LOCKED on the LCD when i turn it on. this then shuts down, i've tried updating the firmware even with both versions. i really annoying, i can't find an answer for this can you?

    right lets keep this problem in this thread.
    You need to give MSI support 24-92 hours for email replies and maybe longer if support in your country is currently overworked. also please check you have got the right email address at MSI- you need Tech Support not Sales.

  • MSI Mega Stick Russian characters support

    Hello...
     Can anybody help me and make MSI Mega Stick 1 (Driver 2.xx) to show Russian characters (ID tags).
     Or may be anybody can describe how can i make it self (format of resource.bin or other info?)
     Thanks....

    Firmware for Mega Stick 1/256, which can display russian fonts in ID3 tags and filenames can be downloaded from the following URL:
    http://www.megastick.ru/
    or
    http://www.megaplayer.ru/

  • Msi mega stick 256

    hello
    on the msi mega stick 256 are some files before you buy it. these are for some new startscreens.
    i removed them. does anybody know where i can find these or e-mail it to me on
    [email protected]
    thanks

    Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!
    USB1.1: (firmware version v3.00.13)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
    USB2.0: (firmware version v2.00.09)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • MSI Mega Stick 511 Lite (without FM) 128MB won't skip songs

    I just bought a MSI Mega Stick 511 Lite (without FM) 128MB. I am unable to skip to the next song when playing. I can fast forward the song but it won't let me skip to the next song. Does anyone have a similar experience or know the solution ?

    I think it might be that i held the menu button too long. A quick flick to the left or right (letting go quickly) seems to make it work. P.S. The firmware upgrade to version 3 is good coz there is now a playlist option.

  • MOVED: MSI MEGA STICK 511 Help

    This topic has been moved to Other MSI products.
    MSI MEGA STICK 511 Help

    Please update the latest F/W (v3.0.6) and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
    3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • Please Help!!! MSI Mega Stick 256

    Hi There!
    I've Got An MSI Mega Stick 256 Mp3 player.It Was Working Just Fine Until Yesterday That All Of A Sudden After Turning It Off When I Wanted To Turn It On Later It Never Turned On.I Thought It Was Battery But After Replacing The Battery With A New One Nothing Happened.Doesn't Boot.Nothing
    what should I Do? What Has Happened?
    I'm Really sad!    I Can't Live Without It
    Please Help Me! Thanks In Advance

    Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!
    USB1.1: (firmware version v3.00.13)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
    USB2.0: (firmware version v2.00.09)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • MSI MEGA Stick 256 MP3 Studio Error

    When I try to install MP3 Studio off the CD that came with my megastick, it gives me an error and tells me files are missing. If I check manually, I can confirm that this is the case.

    Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!
    USB1.1: (firmware version v3.00.13)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
    USB2.0: (firmware version v2.00.09)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • MSI Mega Stick 1 problem with Nforce 2? Look here

    I love this stick, so I didn't give up to find a solution. With SP 1&2 it freezed when there is data communication. Now it's gone how?:  
    Flash the latest firmware of Mega Stick II to your Mega Stick I
    After installing MSI driver, it freezed again

    Actually i am having this problem also. Msi mega 256mb mega stick is not compatible with abit mobo NF7-s as i had tried to use it with other computers which is using nf7-s mobo also. But it comes to normal when i plug it into my my housemate computer which is not using nf7-s mobo. I am wondering of how to solve this problem for long long time already. Can anyone tell me how to solve it? Even i had updated the firmware to the newest but the problems still occur.

  • Mega stick 128 problem

    i bought mis mega stick for 6 month ago and one day i left my mega stick with a old battery ,i can't play mp3 but i still can store data so i don't change the batt .when i try to open mp3 (...i start press the play button MSI logo appear and after that everything disspear )how can i solve the problem.i live in myanmar so i can't send to service center .pls help me

    Try updating and flashing your firmware to the latest version found in:
    This Page
    Good luck!

  • Mega Stick 128

    Hi!
    Last week i bought   Mega stick128 MP3  and now I have a few problems with the connection to usb of my computer.
    I have Windows XP Professional service Pack 1 with driver USB 2.0 but when I put the stick in the USB and I try to explore my folder all system stop and I to turn off the pen from usb port. I try also with my notebook with Windows2000 and I have not any problem, all is fantastic.
    So I decide to install the driver for windows XP from your internet site, but nothing is change. The firmware of the stick  is the last one 2.5 European.
    Can you help me, I need a special patch or there is a no compatibility between the stick and windows XP professional.
    I don’t think that is a problem of the stick because with windows 2000 I haven’t problem, but I don’t think also that is a problem of USB port of my computer because I use another  flash stick without a problem.
    Last information ,when the stick stop the message on the display in reading!
    Please Help me
    Thank you.

    look, when you make these replies saying "nothing changed" will not help. what did you do, step by step, and what happened when you tried it? so you went to a comp in which the mega stick didn't hang windows. you right click formatted the mega stick "x" drive using fat or fat 16 (i used fat) and not fat 32. did you uncheck the quick format, or did you leave it checked? please explain yourself. how do i know if you understood what i was asking or if i even explained it well enough? either one has to be the case as you are the only one in which this technique has not worked for.  

  • MSI Mega Stick 1 & k7n2 Delta Problem

    I have a problem reading from my mega stick 1 , so i think it's there a problem with my motherboard, because with my old computer it work perfectly.
    If anyone can help me,  thanks

    Maybe the problem solution will be at
    https://forum-en.msi.com/index.php?sid=&postid=318548#post318548

Maybe you are looking for

  • Can I buy an UNLOCKED Kyocera Brigadier?

    I am from South Africa and would like to purchase this phone. So it needs to be unlocked to that I can use my local carrier's APN.

  • FI Configuration

    Hi I am new in SAP and got the implementation project......pls send me FI Configuration document.  to my mail [email protected] thanks

  • Faster way to migrate data from SQL Server to Oracle 10g

    We have to migrate data from SQL Server to Oracle 10 g. One particular table on SQL Server has records around 1.25 millions. We tried moving data using DTS package, but looks it will take hours with current speed of 300 records/minute. This table has

  • Sprucing up 3-D bar charts

    If you use bar charts very often, you've probably noticed that the appearance of bar charts can be enhanced by selecting a 3-D look (and maybe even better with the inclusion of a shadow). Another option is to include bar's value as a label on the ind

  • VI Scripting - Preserve a VI's namespace?

    Hi, I'm currently using VI Scripting to generate a set of VIs based on the contents of an xml file.  The set of generted VIs end up being claimed as part of a library file (call it library1.lvlib).  The problem is that if I need to regenerate these V