MSI Mega Stick 128MB Media Error
I have a MSI Mega Stick 128MB and when i turn it on it comes up with "Media Error" - then turns off. Can anybody PLEASE help me?
Please update latest firmware (v3.00.13) and try again!!
Please according to firmware update procedure to do of the following:
Mega stick firmware update process: (Don't put battery)
1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=485)
2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
3. Please press sustained “play key” first, then plug your mega stick 128 in your PC.
4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
Please note: (1) Don't put battery before updating. (2) The step 3 is very important, please must press sustained “play key” first, then connect into your PC.
Similar Messages
-
Msi mega stick 1 128 error flash
I had update my bios mega stick but I had occured an error.
now when I connect the stick in usb port the pc wrote "usb not supported" the display is off.
help me pleaseno. it's said "usb unrecognized".
-
MEGA Stick 1 , Media Error !!!
Hi,
what's wrong with my megastick 1 128 mb? when i put it on it says: Media error! and then it shuts down again. There are normal mp3 files on it.
what to do
Willemhi wilemmm,
i just got the same problem after i formatted the disk using the format utility from Windows XP. First of all i thought i crashed the firmware somehow but in this thread someone wrote you may not format it using fat32, so go back to you windows machine and format it under FAT, and all works just fine! I also saw that formatting under FAT32 is impossible with the newest driver. -
Mega Stick 256 "Media Error".
Hello, i tried adding mp3's to my stick. after i added the files in windows and unplugged the stick i tried turning it on. the MSI screen came up and after that a "meid error" meesage came up and the stick shut off. i tried plug in the stick and delete all the files on the comp, but after restarting the stick i got the same message. what is going on with this thing??!!
well its the nforce chip set with it's usb 2.0 that's causing the problem. it's the same on most newer nforce boards regardless of who's name is on the label. they need to just make it usb 2.0 capatible and allow us to recharge recharable bastteries while connected to the comp of course that wouldb etoo much to ask. i just would like the other needed issues to be fix'd. like skipping songs too fast will cause the player to play a song with the name of the previous song still scrolloing across. and volume scaling
-
MSI Mega Stick 511 Lite (without FM) 128MB won't skip songs
I just bought a MSI Mega Stick 511 Lite (without FM) 128MB. I am unable to skip to the next song when playing. I can fast forward the song but it won't let me skip to the next song. Does anyone have a similar experience or know the solution ?
I think it might be that i held the menu button too long. A quick flick to the left or right (letting go quickly) seems to make it work. P.S. The firmware upgrade to version 3 is good coz there is now a playlist option.
-
MSI Mega Stick Russian characters support
Hello...
Can anybody help me and make MSI Mega Stick 1 (Driver 2.xx) to show Russian characters (ID tags).
Or may be anybody can describe how can i make it self (format of resource.bin or other info?)
Thanks....Firmware for Mega Stick 1/256, which can display russian fonts in ID3 tags and filenames can be downloaded from the following URL:
http://www.megastick.ru/
or
http://www.megaplayer.ru/ -
MSI mega stick 128 Shut down problem
I have a problem , I have a MSI mega stick 128 and fron a litle time it has started tu Shut down or restart rondomley. At first it hapend from time to time but now it hapends 20 times a day . It is realy enoig. If yu have an ideea PLS tel me what to do . (I changed the firmware from the original to new versions but it didn't help .) Is there any hope left ?? I am desperate . So if you have am answer to my problem pls let me know . BYE
Maybe the problem solution will be at
https://forum-en.msi.com/index.php?sid=&postid=318548#post318548 -
hello
on the msi mega stick 256 are some files before you buy it. these are for some new startscreens.
i removed them. does anybody know where i can find these or e-mail it to me on
[email protected]
thanksPlease confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
Please do according to firmware update procedure of the following:
Mega stick firmware update process: (Don't put battery)
1. Please download and install the latest firmware and driver!!
USB1.1: (firmware version v3.00.13)
(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
USB2.0: (firmware version v2.00.09)
(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
Hope to solve your issue!! -
Backlight died on MSI Mega Stick 128
My backlight stops working!!!!!!! =\
Does anyone else has this problem ???????
i tried formatting it using the ulitlity software which came along, but it doesn't help.Hi, I have the same problem, I am using the MSI Mega Stick 256 4 months, everything worked fine so far. Suddenly the backlight died, and it cannot be re-enabled. Could it be just a software problem (Is there a firmware upgrade available?) or should I return the product and require replacement?
Thanks.
Lukas
Prague, CZ -
MOVED: MSI MEGA STICK 511 Help
This topic has been moved to Other MSI products.
MSI MEGA STICK 511 HelpPlease update the latest F/W (v3.0.6) and try again!!
Please do according to firmware update procedure of the following:
Mega stick firmware update process: (Don't put battery)
1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
Hope to solve your issue!! -
Please Help!!! MSI Mega Stick 256
Hi There!
I've Got An MSI Mega Stick 256 Mp3 player.It Was Working Just Fine Until Yesterday That All Of A Sudden After Turning It Off When I Wanted To Turn It On Later It Never Turned On.I Thought It Was Battery But After Replacing The Battery With A New One Nothing Happened.Doesn't Boot.Nothing
what should I Do? What Has Happened?
I'm Really sad! I Can't Live Without It
Please Help Me! Thanks In AdvancePlease confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
Please do according to firmware update procedure of the following:
Mega stick firmware update process: (Don't put battery)
1. Please download and install the latest firmware and driver!!
USB1.1: (firmware version v3.00.13)
(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
USB2.0: (firmware version v2.00.09)
(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
Hope to solve your issue!! -
MSI MEGA Stick 256 MP3 Studio Error
When I try to install MP3 Studio off the CD that came with my megastick, it gives me an error and tells me files are missing. If I check manually, I can confirm that this is the case.
Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
Please do according to firmware update procedure of the following:
Mega stick firmware update process: (Don't put battery)
1. Please download and install the latest firmware and driver!!
USB1.1: (firmware version v3.00.13)
(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
USB2.0: (firmware version v2.00.09)
(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
Hope to solve your issue!! -
MSI Mega Stick 1 problem with Nforce 2? Look here
I love this stick, so I didn't give up to find a solution. With SP 1&2 it freezed when there is data communication. Now it's gone how?:
Flash the latest firmware of Mega Stick II to your Mega Stick I
After installing MSI driver, it freezed againActually i am having this problem also. Msi mega 256mb mega stick is not compatible with abit mobo NF7-s as i had tried to use it with other computers which is using nf7-s mobo also. But it comes to normal when i plug it into my my housemate computer which is not using nf7-s mobo. I am wondering of how to solve this problem for long long time already. Can anyone tell me how to solve it? Even i had updated the firmware to the newest but the problems still occur.
-
MSI Mega Stick 1 & k7n2 Delta Problem
I have a problem reading from my mega stick 1 , so i think it's there a problem with my motherboard, because with my old computer it work perfectly.
If anyone can help me, thanksMaybe the problem solution will be at
https://forum-en.msi.com/index.php?sid=&postid=318548#post318548 -
I don't read manual and I format the MEGA STICK 511 and the data and files will be erased. Now my computer don't find the MEGA STICK 511. WHAT I CAN TO DO? PLEASE HELP ME.
Please update the latest F/W (v3.0.6) and try again!!
Please do according to firmware update procedure of the following:
Mega stick firmware update process: (Don't put battery)
1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
Hope to solve your issue!!
Maybe you are looking for
-
Sidebar devices not the same in 'save as' dialog as finder windows.
When I go to finder prefs (command ,) I can change what shows up on the desktop and what appears on the 'sidebar' ... That works fine ... However when I go to save as in many programs the "computer" still appears in the sidebar even when it is turned
-
My wireless keyboard is not recognized by my computer. I changed the batteries to make sure that wasn't the problem. According to online help (via my iPad), I need to update settings so that keyboard is recognized (via wifi). The problem is that I
-
Presonus distorted sound problems
Hi again. Here is my new situation. I just bought a presonus firebox to record my guitar into garage band. I connect the firebox with the included firewire, I'm listening back through brand new AKG headphones and my guitar is conected through a brand
-
hI GUYS This is sri, i need to have done an application to send mails programatically, below is the code, can any one fix the bug or give me the code which works fine? Any help will be appreciable!!!!!! Thanks & Regards, Sri. CODEimport java.util.*;
-
Firefox will not connect to USAToday.
USAToday has been my homepage for years, suddenly FIrefox will no longer open as either my preferred homepage or entering it into the address line. == URL of affected sites == http://usatoday.com/