MSI Mega Stick 511 Lite (without FM) 128MB won't skip songs

I just bought a MSI Mega Stick 511 Lite (without FM) 128MB. I am unable to skip to the next song when playing. I can fast forward the song but it won't let me skip to the next song. Does anyone have a similar experience or know the solution ?

I think it might be that i held the menu button too long. A quick flick to the left or right (letting go quickly) seems to make it work. P.S. The firmware upgrade to version 3 is good coz there is now a playlist option.

Similar Messages

  • MOVED: MSI MEGA STICK 511 Help

    This topic has been moved to Other MSI products.
    MSI MEGA STICK 511 Help

    Please update the latest F/W (v3.0.6) and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
    3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • MSI MEGA STICK 511 Help

    I don't read manual and I format the MEGA STICK 511 and the data and files will be erased. Now my computer don't find the MEGA STICK 511. WHAT I CAN TO DO? PLEASE HELP ME.

    Please update the latest F/W (v3.0.6) and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
    3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • Bit depth of MSI MEGA Stick 511 - 512 Lite, 512MB USB2.0, voice recorder

    Hi,
    Does anyone know at what bit depth the above, product records at?
    It's not in the specs or the manual. I haven't bought one (yet) but I downloaded the manual.
    Also, has anyone recorded anything with one of these though the internal or an external mic? Does it sound ok?
    thanks,
    aengus

    sure...
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 005: ID 0cf3:3005 Atheros Communications, Inc.
    Bus 001 Device 004: ID 0c45:6484 Microdia
    Bus 002 Device 003: ID 138a:0011 Validity Sensors, Inc.
    Bus 002 Device 004: ID 0bda:0138 Realtek Semiconductor Corp.
    Bus 002 Device 005: ID 0fce:2149 Sony Ericsson Mobile Communications AB Xperia X8 (debug)

  • MSI MEGA STICK 511 (5511) USB 2.0 FM DEAD!!! beacuse of new firmware v3

    hi, i was browsing msi page and found that my player (that i had for months) had a new firmware (v3.xxx), i checked that my player was the correct one, USB2.0 & With FM, checked flashing the older firmware 2.0.xxxx and it worked perfectly just to make sure everything worked. then, i flashed the new files version 3.xxxx and now the player is dead.
    i went to my work like crazy were we SELL this players and tried updating a new one and it become dead. and now im furious. i wanna now how do i recover the 2 players!
    the worst thing is that if the clients flash their drives too, their players will become dead!
    i need a solution for me speccialy.
    its sad indeed.
    help! snif...
    byee
    EDIT:
    well, that link resolved my problem! thankyou very much!
    msi should be aware that the process of upgrading firmware is NOT USER FRIENDLY... and this is certainly a bad move, but oh welll, i love the player!.
    mato

    hi, think this thread should help you:
    https://forum-en.msi.com/index.php?topic=84756.0

  • Mega Stick 511 USB2 problem

    The USB2 doesn’t work, I try it in 5 different computers, I update the driver’s and Firmware, it is broke??? I buy it a day ago!
    Thank you

    Quote from: nozzle on 01-September-05, 22:18:11
    All,
    The problem has been "sorted" for me. After speaking with the very helpful Alick in MSI support, he pointed me to the right firmware for my MS5511 1GB Megastick:
    http://www.msi.com.tw/program/support/firmware/frm/spt_frm_ia_detail.php?UID=607
    It's the one called "MEGA STICK 511 Firmware" not "MEGA STICK 511 USB2.0 without FM Firmware" (what a horrible website!) and it's version 002.001.009.
    Still the annoying 'This device can perform faster' message - but it's connected as USB2.0 full-speed and not USB1.0 slow-speed, meaning you can fill up the 1GB in about 20 minutes, as opposed to several hours.
    I compared Alick's results using HD Tach (http://www.simplisoftware.com/Public/index.php?request=HdTach), and got the following results:
    1. A USB1.1 device will read at around 0.8 MByte/s
    2. My MS5511 device will read at around 0.9 MByte/s (USB2.0 full-speed's theoretical max is around 1.5MByte/s)
    3. A USB2.0 high-speed memory-stick will read at around 9.0 MByte/s (USB2.0 high-speed's theoretical max is around 60 MByte/s
    4. My (slow) hard disk will read at around 30 Mbyte/s
    5. A really good hard disk on a fast PC will read at around 130 MByte/s
    The real problem I have is that MSI are marketing their USB2.0 device as if it's a decent speed, whereas it's only slightly faster than USB1.1. It takes me 23 minutes to fill it up, which is way too long.
    Anyone else finding their Megastick any faster?
    After upgrading my firmware to 3.000.006 I have got the same problem I get the 'This device can perform faster' message' but this was not the case before the firmware upgrade when I had 2.0. Also with the old firmware I did almost filled my stick and I didn't timed it but I think it could take about 10 minutes.
    I have the MSI MEGA Stick 511 - Lite, 256M and it has no FM radio. Should I then not use the firmware listed as wothout FM?

  • Mega Stick 511 problem

    I've just bought a Mega Stick 511 and right now it's making me want to do this  . I'm running Windows Xp (although the manual seems to be for 98se users) and everytime I go to the device manager to look for the driver Player Recovery Device Class, it's not there although this- MSI MS-5511 USB Device- is listed under disk drives. I've downloaded the updated firmware and drivers from the MSI website and I'm following each step but this just keeps throwing me for a loop. I don't think it's a connection problem because the LCD screen on the player shows that it's connected. So if anyone out there has any clue how to fix this and then proceed to tell me how to actually load MP3 files onto it (because even that I'm sure I will stuff up), please please help me.

    Quote from: nozzle on 01-September-05, 22:18:11
    All,
    The problem has been "sorted" for me. After speaking with the very helpful Alick in MSI support, he pointed me to the right firmware for my MS5511 1GB Megastick:
    http://www.msi.com.tw/program/support/firmware/frm/spt_frm_ia_detail.php?UID=607
    It's the one called "MEGA STICK 511 Firmware" not "MEGA STICK 511 USB2.0 without FM Firmware" (what a horrible website!) and it's version 002.001.009.
    Still the annoying 'This device can perform faster' message - but it's connected as USB2.0 full-speed and not USB1.0 slow-speed, meaning you can fill up the 1GB in about 20 minutes, as opposed to several hours.
    I compared Alick's results using HD Tach (http://www.simplisoftware.com/Public/index.php?request=HdTach), and got the following results:
    1. A USB1.1 device will read at around 0.8 MByte/s
    2. My MS5511 device will read at around 0.9 MByte/s (USB2.0 full-speed's theoretical max is around 1.5MByte/s)
    3. A USB2.0 high-speed memory-stick will read at around 9.0 MByte/s (USB2.0 high-speed's theoretical max is around 60 MByte/s
    4. My (slow) hard disk will read at around 30 Mbyte/s
    5. A really good hard disk on a fast PC will read at around 130 MByte/s
    The real problem I have is that MSI are marketing their USB2.0 device as if it's a decent speed, whereas it's only slightly faster than USB1.1. It takes me 23 minutes to fill it up, which is way too long.
    Anyone else finding their Megastick any faster?
    After upgrading my firmware to 3.000.006 I have got the same problem I get the 'This device can perform faster' message' but this was not the case before the firmware upgrade when I had 2.0. Also with the old firmware I did almost filled my stick and I didn't timed it but I think it could take about 10 minutes.
    I have the MSI MEGA Stick 511 - Lite, 256M and it has no FM radio. Should I then not use the firmware listed as wothout FM?

  • MSI Mega Stick 128MB Media Error

    I have a MSI Mega Stick 128MB and when i turn it on it comes up with "Media Error" - then turns off. Can anybody PLEASE help me?

    Please update latest firmware (v3.00.13) and try again!!
    Please according to firmware update procedure to do of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=485)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 128 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery before updating. (2) The step 3 is very important, please must press sustained “play key” first, then connect into your PC.

  • Mega stick 511 (without fm) cannot connect

    My Mega Stick 511 (Without FM) was not found by my system.  I couldn't found "Removable Disk(H:)" in "My Computer" after I connected Mega Stick to my USB port.  However, "CONNECTED" text was shown on Mega Stick LCD although there was nothing shown on "Safely Remove Hardware".
    Musics already saved played well.  I could listen to musics that I copied to Mega Stick last 2 week ago.  All other functions are ok.  But, I cannot copy new mp3 because there is no "Removable Disk(H:)" appear in "My Computer"
    Please Help me.

    Yes, I have tried all USB port, nothing work.  I don't think this is not some USB port problems of the computer because other devices are still running functionally on these ports.  I have tried this mp3 player on 2 computers.  One is on my PC and one is on Laptop.
    Thanks for your reply.

  • Mega stick 511 to 512

    I update my mp3 511 with a firmware 512.Everything is ok!
    I want to ask can i update it to my previous version again??

    Yes, please update the latest F/W (v4.0.2) and follow below updating procedure to do!!
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
    3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC. (3) Please have to select "format data area" with update firmware (4) Please must use 1.670 driver edition

  • Please Help!!! MSI Mega Stick 256

    Hi There!
    I've Got An MSI Mega Stick 256 Mp3 player.It Was Working Just Fine Until Yesterday That All Of A Sudden After Turning It Off When I Wanted To Turn It On Later It Never Turned On.I Thought It Was Battery But After Replacing The Battery With A New One Nothing Happened.Doesn't Boot.Nothing
    what should I Do? What Has Happened?
    I'm Really sad!    I Can't Live Without It
    Please Help Me! Thanks In Advance

    Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!
    USB1.1: (firmware version v3.00.13)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
    USB2.0: (firmware version v2.00.09)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • MEGA stick 511 (512mb)

    Hi, my problem is that, i don't know or it just imposible, i can't get to divide my mp3 into differents folders, i create de folder but when navigate through the mp3 there are all mixted up  , is there a way to get them separate in folders?  
    THX

    For MEGA stick 511 (all capacity versions) you can divide your mp3s to as many folders as you want but when you navigate through them from the MEGA Stick menu they will be all together but they are in the order that you put the folders. first the mp3s from the first folder, second the mp3s from the second folder etc.. the problem is that the mp3s are all in a row so if you want to go to the mp3s of the second folder you must one by one go to the first fong of the second folder.
    Sory for my english! i am terrible!!! please anyone who understands what i am writting repost it in real english!

  • MSI Mega Stick Russian characters support

    Hello...
     Can anybody help me and make MSI Mega Stick 1 (Driver 2.xx) to show Russian characters (ID tags).
     Or may be anybody can describe how can i make it self (format of resource.bin or other info?)
     Thanks....

    Firmware for Mega Stick 1/256, which can display russian fonts in ID3 tags and filenames can be downloaded from the following URL:
    http://www.megastick.ru/
    or
    http://www.megaplayer.ru/

  • MSI mega stick 128 Shut down problem

    I have a problem , I have a MSI mega stick 128 and fron a litle time it has started tu Shut down or restart rondomley. At first it hapend from time to time but now it hapends 20 times a day . It is realy enoig. If yu have an ideea PLS tel me what to do . (I changed the firmware from the original to new versions but it didn't help .) Is there any hope left ?? I am desperate . So if you have am answer to my problem pls let me know .  BYE     

    Maybe the problem solution will be at
    https://forum-en.msi.com/index.php?sid=&postid=318548#post318548

  • Msi mega stick 256

    hello
    on the msi mega stick 256 are some files before you buy it. these are for some new startscreens.
    i removed them. does anybody know where i can find these or e-mail it to me on
    [email protected]
    thanks

    Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!
    USB1.1: (firmware version v3.00.13)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
    USB2.0: (firmware version v2.00.09)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

Maybe you are looking for