Msi mega stick 520 question

i just wonder if the belt clip in this player can be removed or is it fixed there i download the manual and there is nothing about that if someone who use this mp3 player can answer me it would be really helpful for me thanks a lot.

Maybe you can ask customer services center!!!
(Taiwan)  TEL: 2505-5008
(American)  TEL: 1-626-913-0828 or 1-305-591-2229
     

Similar Messages

  • Mega Stick 520 can transfer at 480mbps?

    The MSI Mega Stick 520 1GB can transfer at USB 2.0 HIGH SPEED 480 mbps????
    Thanks!!!

    Only 3174 kB/sec reading and 2185 kB/sec writing.     
    Benchmarked with Sandra 2005.
    Results:
    SiSoftware Sandra
    Benchmark Results
    Combined Index : 649 operation(s)/min
    Endurance Factor : 36.0
    512B Files Test : 758 operation(s)/min
    32kB Files Test : 743 operation(s)/min
    256kB Files Test : 463 operation(s)/min
    2MB Files Test : 75 operation(s)/min
    64MB Files Test : 3 operation(s)/min
    Results Interpretation : Higher index values are better.
    Performance Test Status
    Run ID : XANDER on Jueves, 17 de Noviembre de 2005 at 02:35:40 a.m.
    SMP Test : No
    Total Test Threads : 1
    SMT Test : No
    Dynamic MP/MT Load Balance : No
    Processor Affinity : No
    512B Files Test
    Read Performance : 28264 operation(s)/min (236 kB/sec, 1x)
    Write Performance : 327 operation(s)/min (2790 bytes/sec)
    Delete Performance : 263 operation(s)/min
    File Fragments : 1.0
    Combined Index : 758 operation(s)/min
    32kB Files Test
    Read Performance : 5119 operation(s)/min (2730 kB/sec, 15x)
    Write Performance : 276 operation(s)/min (147 kB/sec, 0x)
    Delete Performance : 713 operation(s)/min
    File Fragments : 1.0
    Combined Index : 743 operation(s)/min
    256kB Files Test
    Read Performance : 731 operation(s)/min (3119 kB/sec, 17x)
    Write Performance : 253 operation(s)/min (1079 kB/sec, 6x)
    Delete Performance : 652 operation(s)/min
    File Fragments : 1.0
    Combined Index : 463 operation(s)/min
    2MB Files Test
    Read Performance : 93 operation(s)/min (3174 kB/sec, 18x)
    Write Performance : 45 operation(s)/min (1536 kB/sec, 8x)
    Delete Performance : 407 operation(s)/min
    File Fragments : 1.0
    Combined Index : 75 operation(s)/min
    64MB Files Test
    Read Performance : 3 operation(s)/min (3277 kB/sec, 18x)
    Write Performance : 2 operation(s)/min (2185 kB/sec, 12x)
    Delete Performance : 175 operation(s)/min
    File Fragments : 1.0
    Combined Index : 3 operation(s)/min
    Endurance Test Status
    Operating System Disk Cache Used : No
    Use Overlapped I/O : No
    Test File Size : 32MB
    Block Size : 512 byte(s)
    File Fragments : 1
    Endurance Benchmark Breakdown
    Repeated Sector ReWrite : 143 kB/s
    Sequential Sector Write : 394 kB/s
    Random Sector Write : 5 kB/s
    Drive
    Total Size : 993MB
    Free Space : 474MB, 48%
    Cluster Size : 16kB
    Performance Tips
    Notice 5901 : 1x=176kB/s; As some device makers use 1x=150kB/s exercise caution when comparing measured vs. published ratings.
    Notice 5008 : To change benchmarks, click Options.
    Notice 5004 : Synthetic benchmark. May not tally with 'real-life' performance.
    Notice 5006 : Only compare the results with ones obtained using the same version!
    Notice 5207 : Consider using the File System Benchmark for non-Flash devices.
    Notice 5900 : Endurance factor can only be used on the same type of device (SLC or MLC).
    Tip 11 : Use the 'Switch Chart Type' button to switch between Detailed and Combined charts.
    Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.

  • MEGA STICK 520 Firmware update?

    Hi, well I´been searching and reading this forum for quite some time and I haven´t found answers to this questions and I though that maybe someone did, so here it is:
    I own a MEGA STICK 520 and I found a firmware update MS5520v0.2.0_FW.zip (2005-8-17) but I want to know exactly what does it changes, so if someone did the update, what does it do? And did you have any problems installing it? because I´ve read too many threads about players dying or allmost.
    Is it the first firmware update? cause aparently for what i´ve read a lot of firmware with problems were solved with new versions.
    Thanks in advance,
    Bherno
    Ps: sorry for my english, i´m from argentina. and please don´t answer me "just do it man!", because it cost me a lot of money and i can´t afford to kill it. I have two good reasons for doing the update, it´s really annoying that the player starts reproducing an album in the middle when it is prefectly organiced (in fact if you go manually to the first track it will play perfectly fine), and that the volume increases exponentialy.

    The latest firmware feature is more little bug, thus please update the latest F/W (v0.2.0)!!
    Update items is as follows:
    1. Fixed bug: When manage “playlist” and power off, after power on “playlist” will be disorder.
    2. Fixed bug: The file name will be cut under “playlist” mode.
    3. Fixed bug: When didn’t use a long time, the screen wasn’t display.
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process:
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=605)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5520)
    3. Please press sustained “play key” first (While mega stick can't be recognized by PC please add this procedure), then plug your mega stick 520 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5520" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger. (While mega stick can't be recognized by PC please add this procedure)
    Please note: While mega player can't be recognized by PC, please don’t put battery with update firmware.
    Hope to solve your doubt!!

  • MSI Mega Stick Russian characters support

    Hello...
     Can anybody help me and make MSI Mega Stick 1 (Driver 2.xx) to show Russian characters (ID tags).
     Or may be anybody can describe how can i make it self (format of resource.bin or other info?)
     Thanks....

    Firmware for Mega Stick 1/256, which can display russian fonts in ID3 tags and filenames can be downloaded from the following URL:
    http://www.megastick.ru/
    or
    http://www.megaplayer.ru/

  • MSI mega stick 128 Shut down problem

    I have a problem , I have a MSI mega stick 128 and fron a litle time it has started tu Shut down or restart rondomley. At first it hapend from time to time but now it hapends 20 times a day . It is realy enoig. If yu have an ideea PLS tel me what to do . (I changed the firmware from the original to new versions but it didn't help .) Is there any hope left ?? I am desperate . So if you have am answer to my problem pls let me know .  BYE     

    Maybe the problem solution will be at
    https://forum-en.msi.com/index.php?sid=&postid=318548#post318548

  • Msi mega stick 256

    hello
    on the msi mega stick 256 are some files before you buy it. these are for some new startscreens.
    i removed them. does anybody know where i can find these or e-mail it to me on
    [email protected]
    thanks

    Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!
    USB1.1: (firmware version v3.00.13)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
    USB2.0: (firmware version v2.00.09)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • MSI Mega Stick 511 Lite (without FM) 128MB won't skip songs

    I just bought a MSI Mega Stick 511 Lite (without FM) 128MB. I am unable to skip to the next song when playing. I can fast forward the song but it won't let me skip to the next song. Does anyone have a similar experience or know the solution ?

    I think it might be that i held the menu button too long. A quick flick to the left or right (letting go quickly) seems to make it work. P.S. The firmware upgrade to version 3 is good coz there is now a playlist option.

  • MSI Mega Stick 128MB Media Error

    I have a MSI Mega Stick 128MB and when i turn it on it comes up with "Media Error" - then turns off. Can anybody PLEASE help me?

    Please update latest firmware (v3.00.13) and try again!!
    Please according to firmware update procedure to do of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=485)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 128 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery before updating. (2) The step 3 is very important, please must press sustained “play key” first, then connect into your PC.

  • Backlight died on MSI Mega Stick 128

    My backlight stops working!!!!!!!  =\
    Does anyone else has this problem ???????
    i tried formatting it using the ulitlity software which came along, but it doesn't help.

    Hi, I have the same problem, I am using the MSI Mega Stick 256 4 months, everything worked fine so far. Suddenly the backlight died, and it cannot be re-enabled. Could it be just a software problem (Is there a firmware upgrade available?) or should I return the product and require replacement?
    Thanks.
    Lukas
    Prague, CZ

  • MOVED: MSI MEGA STICK 511 Help

    This topic has been moved to Other MSI products.
    MSI MEGA STICK 511 Help

    Please update the latest F/W (v3.0.6) and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
    3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • Please Help!!! MSI Mega Stick 256

    Hi There!
    I've Got An MSI Mega Stick 256 Mp3 player.It Was Working Just Fine Until Yesterday That All Of A Sudden After Turning It Off When I Wanted To Turn It On Later It Never Turned On.I Thought It Was Battery But After Replacing The Battery With A New One Nothing Happened.Doesn't Boot.Nothing
    what should I Do? What Has Happened?
    I'm Really sad!    I Can't Live Without It
    Please Help Me! Thanks In Advance

    Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!
    USB1.1: (firmware version v3.00.13)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
    USB2.0: (firmware version v2.00.09)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • MSI Mega Stick 1 problem with Nforce 2? Look here

    I love this stick, so I didn't give up to find a solution. With SP 1&2 it freezed when there is data communication. Now it's gone how?:  
    Flash the latest firmware of Mega Stick II to your Mega Stick I
    After installing MSI driver, it freezed again

    Actually i am having this problem also. Msi mega 256mb mega stick is not compatible with abit mobo NF7-s as i had tried to use it with other computers which is using nf7-s mobo also. But it comes to normal when i plug it into my my housemate computer which is not using nf7-s mobo. I am wondering of how to solve this problem for long long time already. Can anyone tell me how to solve it? Even i had updated the firmware to the newest but the problems still occur.

  • MSI MEGA Stick 256 MP3 Studio Error

    When I try to install MP3 Studio off the CD that came with my megastick, it gives me an error and tells me files are missing. If I check manually, I can confirm that this is the case.

    Please confirming your mega stick is USB1.1 or USB2.0 first, then update firmware and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!
    USB1.1: (firmware version v3.00.13)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=543)
    USB2.0: (firmware version v2.00.09)
    (http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=612)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-551X)
    3. Please press sustained “play key” first, then plug your mega stick 256 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-551X" update now!!!
    5. As you update firmware that you can select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • MSI Mega Stick 1 & k7n2 Delta Problem

    I have a problem reading from my mega stick 1 , so i think it's there a problem with my motherboard, because with my old computer it work perfectly.
    If anyone can help me,  thanks

    Maybe the problem solution will be at
    https://forum-en.msi.com/index.php?sid=&postid=318548#post318548

  • MSI MEGA STICK 511 Help

    I don't read manual and I format the MEGA STICK 511 and the data and files will be erased. Now my computer don't find the MEGA STICK 511. WHAT I CAN TO DO? PLEASE HELP ME.

    Please update the latest F/W (v3.0.6) and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
    3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
    5. As you update firmware that you have to select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

Maybe you are looking for

  • Help needed to create chartes in bw

    Hello   i have charecter IO matid, salesorder, KF-IO price, quantity.. I want a graphical representation in BEx. how can i do that? and BDS – Business Document Store --what it is? and where can i get the info on it? kasinath

  • Feedback on Apple iPhone

    All, I share the following feedback that I recently sent to Apple via the following link: www.apple.com/feedback/iphone.html I provide this here as you may have benefit in the communication. Cheers, Chuck Hi, I recently purchased an iPhone 3G. I have

  • Networking Question

    I have a T400 with Vista Business that has a couple of networking issues. First, I have a lot of trouble of dropping connections using wireless, probably related to other threads here about the Intel 5300 AGN adaptor. This does not happen when wired.

  • The JNLP nightmare - a summary

    our application has the following preconditions: * one EAR should work on the lab, the validation and the production environment with no security warnings * we have to use 2 jnlp files * we use native libraries the conclusion we've drawn: this isn't

  • Application Module Nesting Performance

    I have multiple application modules and it is currently nested to one main application module.Due to the complexity of my logic, I would like to refactor it further but I cannot move it outside the root application module because the instance of the