MSI MegaPC 651 and two audio streams at the same time

Running Showshifter Time Shifting playback through 5.1 SPDIF, I get the sound of the live stream and the playback stream at the same time, any ideas on how to fix this?
Spec:
MSI MegaPC 651
P4 2.66GHz
512Mb DDR 333MHz
Seagate 120GB 7200rpm 8mb
LiteOn LDW-401S DVD+RW
MS8606M TV@nywhere
Windows XP Home
Showshifter v2.10.2235

Hi, I don't know this for a fact, but I suspect Video will, & Audiowill not.

Similar Messages

  • Is there any way to use bluetooth and force audio out at the same time?

    I have an older treadmill that uses IFit which means a program on my phone controls my treadmill via an aux audio cable. I like using BT headphones so I don't have cords hanging. So...I'm trying to figure some way to either a) have iphone connected physically to treadmill but bt'ing music to my headphones at the same time or b) get iphone to communicate with two different bt devices simultaneously. (Treadmill can also be controlled via BT, but I still need the BT for headphones)
    Any ideas would be great. I currently have cable running from treadmill to iphone and headphones via a splitter but it's a LOT of cord hanging which makes things difficult.

    No. FaceTime is one on one only.

  • Can i listen to audio on my ipad and apple tv streaming at the same time to be able to use the dj app?

    Help

    Just start playing music in the Music app and switch to another app. Either tap the home button to go back to the home screen to find another app, or swipe up from the bottom of the screen if you have Mutlitasking gestures enabled in Settings>General>Mutlitasking Gestures>on - or swipe from screen to screen to get to another App.
    Yoy can listen to Pandora Radio, Tuned In Radio, iHeart Radio - any music or radio app while you use another app.

  • Two incoming streams to the same FMS box?

    Hello,
    I'm trying to figure out whether or not it's possible to have two incoming streams to the same FMS server. Every time I try to search this information, I find stuff on having multiple outgoing streams, but nothing on multiple incoming streams.
    The two streams will have the same content, but will use different video / audio codecs, and be set to different resolutions / bitrates. 
    I don't want to spend the money on another server, so it'd be great to know if FMS can do this.  Thanks.

    Thanks for the response, JayCharles!
    I have another FMS question that's related, so I will ask it here...
    Is it possible to convert a single video stream coming into Flash Media Server into two separate video streams in different formats?
    To be more specific: If I have a video stream coming into Flash Media Server at a high-resolution / bitrate encoded in H.264, is it possible to, on the Flash Media Server, convert that stream into a lower resolution / bitrate VP6 stream on-the-fly, and have the server output both streams simultaneously?
    Thanks again.

  • Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

    Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

  • How could I play and transmit a stream from the same camera

    How could I play and transmit a stream from the same camera?

    Hi,
    As I said, you can use the method getVisualComponent() of the Processor to get a preview Window.
    You create a Processor, prepare it to generate an appropriate output DataSource for what you want to do (saving, TXing, etc).
    Then, for this Processor you extract an AWT Component where the stream will be previewed using the method getVisualComponent().
    Some of the player examples in the JMF guide use this technique. I'm still not write my own player. I'm using an adaptation of the RTPPlayer, but I'm planning to use the above technique to create a Player where I can apply some effects to the stream and then save it if the user wants to.
    If someone already did that, please, correct me if my procedure isn't right!
    By the way, thanks for your help! I was using the DataSource returned from Manager.createCloneableDataSource only to create the clones. I was feeding my main Processor with the original DataSource. That was the problem!
    RGB

  • Hello !! Because if I talk daily to the dame Person for FaceTime and two are always in the same place, once day face time no prolem speak for another day and I have to use skype for error appearing face time ? Thanks for your answers.

    Hello !! Because if I talk daily to the same Person for FaceTime and two are always in the same place, once day face time no prolem speak for another day and I have to use skype for error appearing face time ? Thanks for your answers.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

    I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

    Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

  • 16 channels of audio recording at the same time with a MAC BOOK?

    Hi,
    I want to know how many channels of audio I can record at the same-time with a MAC BOOK (2.16GHz Intel Core 2 Duo, 1GB memory 120GB hard drive, Double-layer SuperDrive), firewire audio device and Logic Pro 8?
    You see I am aiming to record a live gig and I want to come into a firewire recording interface with 16 channels of audio all at the same time (24-bit, 44Khz) Does anyone know if this is possible? Or am I looking for trouble? No plug-ins will be used just record straight in. Anyone have some experience with this?
    Thanks.

    Ok, like this:
    Macbook - FW Port - FW Cable -In- MOTU Traveler -Out- External Harddrive.
    Firewire is capable of chaining units.
    Also plugged into your motu traveler will be an optical cable coming from the ADA.
    This will carry the 8 channels of audio it outputs.
    Also another good thing to do is to also have an optical cable FROM the optical output of your Traveler into the Behringer's input.
    That way you can sync the Behringer's digital clock to that of the Traveler, giving you a slightly better sounding signal that if you were to sync the traveler to the Behringer. This is simply because the traveler has a better quality digital clock than the Behringer unit so it's best to use that. To do this you just select "Adat input" on the back of the Behringer, and leave the Travelers sync to "Internal Clock". It is only a very very slight difference and you may not be able to notice the difference but for the cost of an optical cable it's worth doing.
    It will all make a lot more sense when you have the two units and the harddrive all plugged in.

  • Two processes running at the same time in Lookout

    I have installed Lookout 5.0 with 200 I/O Points onto our server computer. The application of motion control is next to the 200 I/O points through OPC PMAC server/client. Now I would like to have a second process in the same server for trouble shooting and testing without stopping the motion control process. However, this second testing process could have also many I/O points through Serial and USB ports. I assume that the total amount of I/O points of both processes will be greater than 200.I prefer to have independent processes for control and testing because access levels. Can I have these two processes running at the same time when needed?

    Hi,
    From your description you are using a third party OPC server for the motion application. You could have a second Lookout process communicating with the same OPC server with no problems, as long as you do not exceed the number of I/O points your license supports.
    Also, the process you are using for testing obviously could not overwrite datamembers (or registers if you will) that would interfere in the overall application, in other words you can test your application as long as you keep the coherency of the test.
    So the answer would be, yes it is possible, however you are still limited to the number of I/O's your license supports... You may even consider upgrade the number of I/O's you have in your license.
    Best Regards
    Andre Oliveira

  • Can I save and open an attachemnt at the same time?

    I want to be able to open an email with an attachement or attachments and click on the save button for the attachment(s), designate the location (folder) where they are to be saved - but also tell Mail to save the attachments then open them up on the desktop. Two operations in one. If you understand my request you understand what you have to do now - two separate steps. Save. Then find the saved files and open them.
    OR
    Open the attachment from the email which then downloads the file to your designated "all-purpose" location (not the ultimate location you'd want to save it). Then once you've seen it, you do the save thing with the original mail attachment and then have to go back and delete the file from the designated all-purpose download location.
    This latter problem of having to delete unedited downloads manually could be solved with an option in Mail preferences to automatically delete unedited downloads in the "all-purpose" location after that same attachment had been downloaded to another specific location on your hard drive. This option for deleting unedited downloads does not exist, however.
    But even if this step-saver option existed in the preferences, you still would not be able to tell your Mac to save a particular Mail email attachment to a particular folder AND open that attachment at the same time in one command.
    That's what I want.
    Maybe I want both. Save and open together plus the ability to automatically delete unedited attachment downloads in the "all-purpose" download file after the same attachment has been downloaded to another specific location on your hard drive.

    with IOS 6 yes you will be able to do that

  • Can Express 9 play and record multiple instruments at the same time?

    I have logic express 9 and was told with my interface that I can play and record different instruments at the same time on Express 9. Is this true because I have spent a long time trying to figure out how.

    Hi,
    to record multiple Inputs at a time, open up the appropriate number of audio tracks. Now for each track, select the correct Input in the Channelstrip.
    Now, ARM all these tracks for recording by clicking the little red R in the track header or channelstrip. Now if you hit record, all these tracks should record simultaneously their respective inputs.
    All other existing tracks should playback while recording.
    Fox

  • How to sync with two computers not at the same time, I'm registerd with one computer

    How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
    Where do I find my Sync Key ? so I can install manually if it works ?

    Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
    https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

  • How to insert into two differents tables at the same time

    Hi
    I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
    and I want to insert into two differents tables at the same time using one view.
    How can I do that ?
    TIA
    Edgar

    Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
    1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
    2. Create an INSTEAD OF trigger on the view.
    3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
    IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
    INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
    INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
    ELSE
    IF :NEW.deptname IS NOT NULL THEN
    UPDATE dept SET deptname = :NEW.deptname
    WHERE deptno = :NEW.deptno;
    END IF;
    IF :NEW.empname IS NOT NULL THEN
    UPDATE emp SET empname = :NEW.empname
    WHERE deptno = :NEW.deptno;
    Try something along those lines.
    null

  • How do I use 2 Core Audio devices at the same time in Logic w/out switching

    Hello, I use the Aardvark Direct Mix usb3 as my audio interface for mic and guitar. I just upgraded to Logic Pro 7 today and was hoping someone could tell me how I could use the Built-in Audio Core Audio driver along with the Direct Mix USB Core Audio Driver at the same time without having to switch Core Audio Driver's and than rebooting Logic. It is very frustrating doing that as well as not being able to hear my Logic audio during playback/record mode when I am trying to record via the USB3. WHat can I do? Thanks! If ther are both core audio, why can I not just use both of them at the same time? Why must a switch back and forth? Thanks!
    [email protected]

    THanks everyone! awsome article! Thanks for posting it, nh!
    The weird thing is, once I go up to the Menu and select Open Aggregate Device Editor in the AUDIO/MIDI setup utility and try to add a new Aggregate Device setup (step # 6 from the link), the only audio device available is the "Built-in Audio". What's weird is when I have the main Audio MIDI Setup utility open, every single drop-down menu/tab has the "Direct Mix USB 3 1.0.9.1" device right beneath the "Built-in Audio" option. To me that says that the core audio device is indeed recognized by my computer (obviously since I can record with it using Logic). Can anyone help me with this one? Any suggestions?
    Not that it should matter but, the hardware audio interface that I am using is made by the no-longer-existant company once known as Aardvark. I actually had to purchase a third party Core Audio driver just to have it recognized by OS X.
    This is the website where I purchased my audio driver :
    http://www.usb-audio.com/
    A little more on how this device and it's core audio driver function within Logic . . . (Hopefully this might clarify something I may be screwing up) . . .
    I launch Logic with its default Built-in Audio which allows playback of audio from the app. I than go up to Audio Hardware and Drivers and than drop the flip down Driver menu down to the second option, "Direct Mix USB 3 1.0.9.1." Logic than prompts me that I should try to (re)launch Logic Pro to load the appropriate CoreAudio.. I do that. Now I am ready to record guitar through the Direct Mix USB3, I just can't hear anything (unless I use head phones as an output from the Direct Mix).
    Anyway, you all probably already knew what I meant so explaining that was pointless. But my question is, if the Driver is obviously recognized by my comp in both the Audio MIDI Setup and in Logic, than why won't the Direct Mix device show up as a possibility for setting up an aggregate device? Any suggestions? Thanks!
    Power Mac G5 Dual 2.7Ghz 4.5gigs of RAM   Mac OS X (10.4.7)  
    Power Mac G5 Dual 2.7Ghz 2.5gigs of RAM   Mac OS X (10.4)  

Maybe you are looking for