MSI MegaPC 651 upgrade advise needed...

hi guys, i new here
I'm planning for upgrading my old MegaPC 651 (major reason: no money... )
i'm thinking of adding another 1gb ram and upgrade my graphic card to 7600GS preparing for window vista. but after browsing through the forum i found quite a number of ppl having problem when adding additional ram and graphic card... just like to get more opinion before my upgrade, suggestion any1?
p/s: my PSU is 250w type, but most of the 7600gs i come across suggest atleast 300w psu, will that be a problem?

It is a memory issue.  There is something weird about this motherboard...
I got the system working, and i couldn't figure out what i had done differently.  I then installed windows.
I let it run for a few days until i realized that the RAM that was in there was the DDR 400 ram from my other desktop, instead of the DDR 333 that I had intended to use.
I took the DDR400 out, and put the DDR333 in and again.... BEEEEEEP. (8 seconds)
I put the DDR400 back in and still... BEEEEEEP.  (8 seconds)
I know neither stick of RAM is bad because they have both been used successfully in my other desktop system upon the first try.   Its like the MSI has some sort of connection problem in the memory bank, and I lucked out on one try and got all the connections to line up.
If anyone has any suggestions, please advise, because I'm back to square one again.

Similar Messages

  • MSI MegaPC 651 and two audio streams at the same time

    Running Showshifter Time Shifting playback through 5.1 SPDIF, I get the sound of the live stream and the playback stream at the same time, any ideas on how to fix this?
    Spec:
    MSI MegaPC 651
    P4 2.66GHz
    512Mb DDR 333MHz
    Seagate 120GB 7200rpm 8mb
    LiteOn LDW-401S DVD+RW
    MS8606M TV@nywhere
    Windows XP Home
    Showshifter v2.10.2235

    Hi, I don't know this for a fact, but I suspect Video will, & Audiowill not.

  • PSU for MSI MEGAPC 651.

    Where can i get this PSU?
    I need it in Trondheim - Norway.
    Does MSI have a own webshop or something?

    you'd have to contact your nearest MSI office. they are not available to aftermarket
    How to contact MSI.

  • MSI MegaPC 651 - System Won't Boot (Long Beep)

    When I attempt to power on the PC I recieve a continuous beep signal.  
    The Beep is approx. 8 seconds long, followed by 5 seconds of silence.   The signal keeps repeating itself until I turn off the power.
    Obviously, the system is not passing POST so I can't get any video or access the bios.
    The cpu is a P4 2.4ghz 533fsb.
    The memory is a single 512mb DDR 333 chip.
    I've plugged the CPU into a second motherboard and it appears to work fine.  I've tested the ram in the second mother board and it appears to work fine.
    I tried a stick of DDR400 ram from a known-working system and that did not seem to correct the issue.
    One thing I noticed in another similar thread is someone mentioned that i should make sure my CPU fan is plugged in.  
    ~ My Fan is plugged in (came with MSI Barebone), but it doesn't spin.  I've tried plugging in the fan that came with my CPU and that one doesn't spin either.  My Intel  Board that i use for my desktop allows me to boot without a system fan plugged in, I've never heard of a mobo that doesn't.   The system isn't even on long enough for the CPU to be over heating.
    Please Advise.
    -Josh

    It is a memory issue.  There is something weird about this motherboard...
    I got the system working, and i couldn't figure out what i had done differently.  I then installed windows.
    I let it run for a few days until i realized that the RAM that was in there was the DDR 400 ram from my other desktop, instead of the DDR 333 that I had intended to use.
    I took the DDR400 out, and put the DDR333 in and again.... BEEEEEEP. (8 seconds)
    I put the DDR400 back in and still... BEEEEEEP.  (8 seconds)
    I know neither stick of RAM is bad because they have both been used successfully in my other desktop system upon the first try.   Its like the MSI has some sort of connection problem in the memory bank, and I lucked out on one try and got all the connections to line up.
    If anyone has any suggestions, please advise, because I'm back to square one again.

  • Hard drive upgrade advise needed

    i have four 750GB drives setup as two RAID 1 sets. one is the boot drive and one set it storage. i want to upgrade to four 2TB in the same config.
    what's the quickest, painless way to upgrade and transfer data? i dont want to start from scratch, just transfer user account with all data
    Message was edited by: Simon Benus

    The hatter wrote:
    Do one set at a time.
    You really should already have a full backup now on external drive.
    If not then add a WD 2TB or maybe 1.5TB ($109).
    Like I said, two backup sets as minimum before anything else, and only then venture into mirror RAID - which I don't think is necessary or great idea.
    RAID0 for performance, and first cover all bases with backups.
    Backup.
    Pull the mirror set and keep off line - SAFE!
    Create new RAID (if you must)
    Test each drive first by itself.
    Then test the array.
    Then clone/restore from your backup.
    You SHOULD have an external drive set, maybe Sonnet E4P and dual drive case.
    http://firmtek.stores.yahoo.net/sata2me4e.html
    http://eshop.macsales.com/item/Firmtek/SATA2ME4E/
    http://firmtek.stores.yahoo.net/sata2en2.html
    http://eshop.macsales.com/item/Firmtek/SATA2EN2/ (hot swap, tray)
    http://eshop.macsales.com/item/Firmtek/SATA5PM/
    Dual drive, not hot swap, cheap but handles two SATA drives for less:
    http://eshop.macsales.com/item/Other%20World%20Computing/MESATATBEK/
    Sonnet E4P
    http://eshop.macsales.com/item/Sonnet%20Technology/TSATAIIE4P/
    I'd say you didn't have a good backup plan up until now...
    thanks for the tip. i do have a 2tb external as a time machine backup

  • MSI GT780DX GPU UPGRADE question

    HI i recently bought from ebay a gpu replacement card MSI GT60 VGA Upgrade Kit; NVIDIA GTX 680M; 4GB DDR5; MXM 3.0b and my
    problem is that the laptop won't boot(only power button lit on and the fan spins).Do i need a modified bios?
    my specs are:
    msi gt780dx
    16gb ram
    gpu:nvidia 570m 3gb gddr5
    psn:001761-SKU8

    Quote
    HI i recently bought from ebay a gpu replacement card MSI GT60 VGA Upgrade Kit; NVIDIA GTX 680M; 4GB DDR5; MXM 3.0b and my
    problem is that the laptop won't boot(only power button lit on and the fan spins).Do i need a modified bios?
    my specs are:
    msi gt780dx
    16gb ram
    gpu:nvidia 570m 3gb gddr5
    psn:001761-SKU8
    I also bought 1 from ebay last month and when I put it on my gt60, it instantly booted. No problem during installation. i just removed the gpu bracket at the back and all is well.. The card is a beast and you must tame it's heat though.. anyways I hope you solved your problem too.

  • I have been using Aperture 3.3.2 with Mac OS-X 10.7.5.  This version doesn't support RAW with Nikon D7100, I decided to upgrade to 3.4. On downloading, it tells me that to upgrade, I need Aperture Vers.3!  which I have.  What to do??

    I have been using Aperture 3.3.2 with Mac OS-X 10.7.5.  This version doesn't support RAW with Nikon D7100, so I decided to upgrade to 3.4. On downloading, it tells me that in order to upgrade, I need Aperture Version 3, which is what I have.  What is one supposed to do??

    Have you moved or renamed your Aperture 3 version? If it is not installed in the "Applications" folder or not named simply "Aperture", then Software Update will not recognize it.
    Put Aperture back and "Software Update" should find your version.
    Regards
    Léonie

  • HT1338 I have a mac book pro 17" tiger os x 10.4.11. Can anyone tell me what updates/upgrades i need to bring it up to date. Thanks," desperate dummy"

    Hello i am a bit of a novice and need help to bring my MacBookPro up to date. How do i find the relevant updates/upgrades i need, as the software finder, constantly stops a short time after trying to look for updates. The following messege pops up "network error has occured:timed out. (-1001) network problem. Meanwhile i am still connected to the internet?.....  HELP!!!!

    your only option is to look for Leopard on ebay, ensure they are "retail" discs, dont get they grey coloured disc set as they are for specific machines

  • To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?

    To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?
    I had two laptops stolen and the reinstall is a real pain. This also applies to reformats and changeovers to Windows 7, etcetera.

    Windows 7? Then don't waste your life minutes fumbling with an Acrobat 8 - Windows 7 combination.
    If you are to be using Win 7 you'll need the current release of Acrobat (XI). "X" will function but it is no longer marketed by Adobe.
    Be well...

  • MSI MegaPC 865 PRO Troubles...

    Hello All from Oztralia!
    I am having some troubles with a MSI MegaPC 865 PRO, that I'm setting up for our showroom. Essentially, what I assume to be the InstantOn Fancy LED stuff isn't happening. I press the A/V Button on the front, the MegaPC beeps once, the MEGA logo comes up, and then it beeps again. From there, nothing happens. The Volume bar on the LED panel scrolls from side to side, but that's it. Putting an Audio CD or DVD yeilds nothing either.
    Other than that, the system seems to go like a train in PC mode.
    It's Specs are:
    Intel P4 3.0 GHz
    1x Amicroe 512MB DDR 400Mhz RAM
    The MSI TV Tuner Card (Philips Decoder(?), Conexant Chipset)
    Onboard Video, Sound, Network, Modem, Etc.
    If anyone can help us out with this Fancy LED thingo, I would be in your debt. Because, it kinda bites when something billed as being this fantastic thing doesn't work properly, customers kinda lose interest. Thanks in advance!

    I followed the destructions straight from the MSI Software Guide. I installed the InstantOn software on a fresh 200 Gig SATA, then installed XP Home SP2.
    As for installing MCE, I would, but my boss would like to see the MSI box working like it's meant to, as in the A/V button working and everything. I think I'll use MCE for the next one though.
    Cheers fellas, for the replies that is.
    MODIFICATION: Oh, and the TV card came with the MSI as an option. Surely it would work, otherwise why ship it as an option? Where can I find out if it's compatible?

  • Poor sound on a MSI MEGA 651 with realtek acl650

    Good afternoon,
    I am trying to bulid a MCE pc on a MSI MEGA 651.
    I am having problems with the sound.
    I have download the latest drivers from Realtek and even thought my MSI is producing terible sound when connected to my HIFI appliance.
    Added to that my rear right speaker is too low.
    I am using the analog 5.1 outputs from the box.
    Any proposals ?
    Thanks
    Elias

    What xmad is trying to get as information is the 'complete' name of the mainboard. Z87m is not good enough. Also, more information about the other systems components including specifics of the RAM, brand, rated speed, and the PSU brand and description. For now, test with just a single RAM stick.

  • Why can't I send my files.  Asking me to upgrade, but upgrading not needed.  Even if i do try to upgrade it won't advance.  What's up??? Is your system down???

    Why can't I send my files.  Asking me to upgrade, but upgrading not needed.  Even if i do try to upgrade it won't advance.  What's up??? Is your system down???

    Hi anthony yerger,
    Please let me know what Acrobat and OS version are you using.
    How are you trying to send your PDF files?
    If possible, please share the screenshot of the error message so that I can analyze it at my end.
    Regards,
    Anubha

  • TS3938 after lion upgrade, i need to upgrade to Office 2011 or iWork (Pages)..my desktop is from 2007. which should i try?

    after lion upgrade, i need to upgrade to Office 2011 or iWork (Pages)..my desktop is from 2007. which should i try?

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • TS3212 I got an error message thet MSScript.msi is old and I need an update before I can download Itunes.  Where do i get that file?

    I got a message that MY MSScript.msi was old and i need to update it.  How do I find and download this file?  I have limited success in downloads everyon want my credit card #
    Any ideas

    Please quote the exact error message, word-for-word, verbatim.
    What is your operating system?
    What version of Lightroom?

  • Why doesn't FFox alert user when flashplayer upgrade is needed?

    I watch news video every morning using FFox. Today the video displayed as a blank white space. I switched to IE7 and received an error message that flash player upgrade was needed. After I downloaded the upgrade with IE7 the video played fine on FFox. Why no error message from FF?
    == URL of affected sites ==
    http://www.bbc.co.uk

    Flash player for IE is completely separate from Flash for other browsers. Do you still have the problem in Firefox? If so try updating the version of Flash for other browsers. See [[Managing the Flash plugin]]

Maybe you are looking for

  • How To Reverse Excess Confirmed Quantity in Process Order?

    Hi Experts, Good day! I have a Process Order with Total Quantity of 68,180 L which currently have  a status of TECO CNF  DLV  PRC  BASC BCRQ GMPS MACM*. I made my first partial confirmation with a quantity of 1,000 L for my Finished Good u2013 this i

  • Odd behavior during full screen video chat with Mountain Lion Messages?

    I've recently upgraded to Mountain Lion on two MacBook Pros (from Lion) and have started to use the new Messages app. I've been using iChat for years and found it reliable for the most part. However, I've noticed a new behavior that seems like a bug

  • HELP!! SQL query performance bad!!

    This is a very simple query, but it takes too long to process. I have tried changing the orders of everything to no avail. table RBN_MINUTE has 85 million records tabe RBN_LOGS has 12 million RBN_MINUTE has these indexes PK - Start_datetime, RBN_Log_

  • Isync not working with E61 when its supported in isync v3

    Hi Guys, I have isynced a Nokia E61 on my mac with no problems, but after backup the data on a pc via Nokia's own software I cannot isync up with the phone on th mac, I can seem to add it as a bluetooth device but when in Isync trying to add the phon

  • Disk appears twice in Project and Event window

    There seems to be a bug in iMovie that causes the default disk to appear twice in the project and event viewer if you have a symbolic link in the path. For years I have used a symlink to allow me to locate my Users area onto a second drive. This keep