MSI megastick 528 Update process!

Hi all!!!!
I just buy a megastick 528, wich cames with firmware version: 003.000.002
I would like to update it, but i've some quests....
I read the process explained in the manual and in the msi support page but...
I don't understand well how to make the process right...
This is what i understand. pls if someone can correct me, i will appreciate  it!
1)Download form msi page the latest firmware and drivers (I've downloaded file: MS5528FW_v1.00.13.zip)
2)Unzip it to c:\Program files\MSI\MSI-5528\.. (OK, but i must erase all the other files in this directory first?)
3)Remove the batteries from the player
4)Press the power switch and hold it down at the same time i insert the player in the usb port? (When i can release the switch?) (Should appear a message like "new hadware found"?) (then it will install a driver or ask for one?)
5)Go to start - all programs - MSI MS-5528 MEGA STICK - Update
6)Choose if i desire to format or not the 528, and then click start.
I've read in another posts that there should be different version's of the firmware, depending on serial number, but if this is true, how can i know which fw to choose?
The last: I really don't know if the player have already installed the last fw, can u tell me?
Sorry for my english, it's not my native language!!!Thank's in advance!!!!!

i understand from a previous posting that there was a revision to the MegaStick 528, so you needed to check the serial number before updating firmware in order to obtain the correct version
due to confusion being caused, MSI removed the newer firmware from the site. it was the same as that which is already in your MS528, so you have no need to update

Similar Messages

  • MSI megastick 528 response time?

    I just bought, a msi megastick 528 1gb...
    When i press the power button, i has  a delay of 28 seconds to start the player and being functional...is it normal?
    And when passing thru differnet songs it has a delay of 4, 5 secs..it's normal too?
    The last..when using the joystick i've had some prblms...it's difficult to press play, it often assume that i'm pressing the Joystick to the right or to the left...
    What u think?
    Thks In Advance!!

    The last..when using the joystick i've had some prblms...it's difficult to press play, it often assume that i'm pressing the Joystick to the right or to the left...
     :confused2:I have exactly the same problem that you have, it is very embarrassing to me!! Never know what the device is going to do!!!!

  • How to restore my MSI MegaStick 511 MP3 software??

    Hi,
    I accidentally formatted my MSI MegaStick 511. All the software inside are gone and now I can only use it as a normal storage pen drive and can't listen to MP3 nor radio station  . I have lost the MSI package/cover box as I was told there is a CD inside to restore back the MP3 software.
    I really wish to have my Mp3 software installed back in my MI Megastick but I don't know the correct way to do so     . Can anyone help me on this?
    Thank you very  much....
    San San

    Update the latest firmware(v3.0.6) and try again!!
    Please do according to firmware update procedure of the following:
    Mega stick firmware update process: (Don't put battery)
    1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
    2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
    3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
    4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
    5. As you update firmware that you must select "format data area" and after update success, you can release of your finger.
    Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
    Hope to solve your issue!!

  • Megastick 528 firmware probs...

    Hello.
    I just bought MEGASTICK 528 It was perfect but i downloaded the following firmware MS5528_Fw_v3.00.02 and updated my mp3 player with it, updating was succesful,but the i unpluged my mp3 player and tryed to turn it on nothing happens! i tried to update firmware to 001.000.007 but same  then i try to turn on player.The first firmware in player was *.*.012 or something i cant remember. anybody can help ? !
    Respect

    Thanks for help mates, i bringed player to guarantee and they will give me the new one                              :azn:        :smiley:

  • Error While updating Process form data Using Scheduler

    Hi All,
    I am trying to update Process form data (ex : lastname) using a scheduled task Code. I am getting Error while updating Field.
    Code :
    HashMap<String, String> map = new HashMap<String, String>();
    map.put("UD_EBS_PF_LASTNAME", "lastname");
    formintf.setProcessFormData(instancekey, map);  //I AM GETTING AT THIS LINE
    Saying
    Thor.API.Exceptions.tcAPIException: The following required fields have not been given values:EBS IT Resource : The following required fields have not been given values:EBS IT Resource
        at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
        at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
        at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
        at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl_1036_WLStub.setProcessFormDatax(Unknown Source)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
        at $Proxy2.setProcessFormDatax(Unknown Source)
        at Thor.API.Operations.tcFormInstanceOperationsIntfDelegate.setProcessFormData(Unknown Source)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.security.Security.runAs(Security.java:41)
        at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
        at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
        at $Proxy3.setProcessFormData(Unknown Source)
        at com.wyndham.tasks.AssignRandomPasswordToAllUsersSchedulerTest.execute(AssignRandomPasswordToAllUsersSchedulerTest.java:182)
        at com.wyndham.tasks.AssignRandomPasswordToAllUsersSchedulerTest.main(AssignRandomPasswordToAllUsersSchedulerTest.java:63)
    Caused by: Thor.API.Exceptions.tcAPIException: The following required fields have not been given values:EBS IT Resource : The following required fields have not been given values:EBS IT Resource
        at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:761)
        at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:426)
        at Thor.API.Operations.tcFormInstanceOperationsIntfEJB.setProcessFormDatax(Unknown Source)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    Is that possible there was the field ZDATE in your form interface/ context and now it is not? I guess some source has changed so the field in the form (binding to the not existing field) cannot be processed. Otto

  • Problem with checkboxes in IR report mainly for update process please help

    Hello,
    Can anyone please help me out with this issue.
    I have an interactive report with 3 checkbox item for a single column named status. Based on the value of the column status the check box should be checked. For example:
    DECODE(status,'DEV',1,0) as DEV,
    DECODE(status,'RVW',1,0) as RVW,
    DECODE(status,'PRD',1,0) as PROD,
    So for this I have used the apex_item.checkbox item. Below is my report query
    SELECT APEX_ITEM.HIDDEN(30,0,'','f30_' || ROWNUM)
         || APEX_ITEM.HIDDEN(31,0,'','f31_' || ROWNUM)
            || APEX_ITEM.HIDDEN(01,ROWNUM,'','f01_' || ROWNUM)
         || APEX_ITEM.HIDDEN(04,CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN,'','f04_' || ROWNUM)
            || APEX_ITEM.HIDDEN(05,CHF_STATUS,'','f05_' || ROWNUM)
         || APEX_ITEM.HIDDEN(06,CHF_STATUS,'','f06_' || ROWNUM)
            || APEX_ITEM.HIDDEN(08,CHF_STATUS,'','f08_' || ROWNUM)
         || APEX_ITEM.HIDDEN(09,CHF_STATUS,'','f09_' || ROWNUM)
            || APEX_ITEM.HIDDEN(11,CHF_STATUS,'','f11_' || ROWNUM)
         || APEX_ITEM.HIDDEN(12,CHF_STATUS,'','f12_' || ROWNUM)
            || APEX_ITEM.CHECKBOX (32,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f30'');"'
         ,DECODE (0,1, ROWNUM),':','f32_' || ROWNUM) DELETE
            ,CHF_COLUMN
            ,CHF_STATUS
            ,APEX_ITEM.CHECKBOX (07,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f05'');"',DECODE (CHF_STATUS,'DEV',ROWNUM),':','f07_' || ROWNUM) 
              DEV_EDIT
         ,APEX_ITEM.CHECKBOX (10,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f08'');"',DECODE (CHF_STATUS,'RVW',ROWNUM),':','f10_' || ROWNUM) 
              RVW_EDIT
            ,APEX_ITEM.CHECKBOX (13,ROWNUM,'onClick="javascript:ToggleValue(this,' || ROWNUM || ','||'''f11'');"',DECODE (CHF_STATUS,'PRD',ROWNUM),':','f13_' || ROWNUM) 
              PRD_EDIT
            FROM CHF_COLUMN WHERE
    CHF_DATASTORE  = 'DOMAIN_DEV' AND
    CHF_SCHEMA     = 'SCHEMA_DEV' AND
    CHF_TABLE      = 'EMPLOYEEE'
    ORDER BY 1;  And I have a button for the update process so that the users can check the checkboxes option for the status column either 'DEV', 'RVW', 'PRD'. The status of the column can be in either of these states or can be null.
    I have a update process, its having some problem - I don't understand whats causing the problem. Below is the error message which I encountered when trying to update.
    ORA-06502: PL/SQL: numeric or value error: character to number conversion error
    My Update process.
    DECLARE
    l_cnt BINARY_INTEGER := 0;
    l_stepid number := 10;
    l_date DATE := SYSDATE;
    BEGIN
    FOR i IN 1 .. apex_application.g_f01.COUNT
    LOOP
    IF APEX_APPLICATION.G_f05 (i)  = 1 THEN
          UPDATE  CHF_COLUMN
               SET      CHF_STATUS = 'DEV'
             WHERE CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN = APEX_APPLICATION.G_f04 (i)
              l_cnt := l_cnt + SQL%ROWCOUNT;
    apex_application.g_print_success_message := apex_application.g_print_success_message ||
    'Successfully updated'||l_cnt ||'<br><br>';
    END IF;
    IF APEX_APPLICATION.G_f08 (i)  = 1 THEN
          UPDATE  CHF_COLUMN
               SET      CHF_STATUS = 'RVW'
             WHERE CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN = APEX_APPLICATION.G_f04 (i)
              l_cnt := l_cnt + SQL%ROWCOUNT;
    apex_application.g_print_success_message := apex_application.g_print_success_message ||
    'Successfully updated'||l_cnt ||'<br><br>';
    END IF;
    IF APEX_APPLICATION.G_f11 (i)  = 1 THEN
          UPDATE  CHF_COLUMN
               SET      CHF_STATUS = 'PRD'
             WHERE CHF_DATASTORE||CHF_SCHEMA||CHF_TABLE||CHF_COLUMN = APEX_APPLICATION.G_f04 (i)
              l_cnt := l_cnt + SQL%ROWCOUNT;
    apex_application.g_print_success_message := apex_application.g_print_success_message ||
    'Successfully updated'||l_cnt ||'<br><br>';
    END IF;
    END LOOP;
    COMMIT;
    END;If you can please have a look at the app, you can get a better understanding of my problem.
    Workspace : orton_workspace
    username : [email protected]
    password : sanadear
    Application No: 15089 SAMPLE_CHECKBOX_APP
    Thanks,
    Orton
    Edited by: orton607 on Aug 4, 2010 9:28 AM

    I could be wrong but maybe change the hidden items to be like:
    APEX_ITEM.HIDDEN(05,DECODE(CHF_STATUS,'DEV',1,0),'','f05_' || ROWNUM)
    APEX_ITEM.HIDDEN(08,DECODE(CHF_STATUS,'RVW',1,0),,'','f08_' || ROWNUM)
    APEX_ITEM.HIDDEN(11,DECODE(CHF_STATUS,'PRD',1,0),,'','f11_' || ROWNUM)so that the values are 0/1?
    Also, you have
    DECODE (CHF_STATUS,'DEV',ROWNUM)instead of
    DECODE (CHF_STATUS,'DEV',0,1)in the checkboxes, as I would expect.
    I'm also not sure why you need to duplicate the checkboxes (f07,f10,f13) as hidden items (f05, f08, f11) if they are both 0/1 values.

  • I want to know, why the update process of firefox is not work correctly. Because of i begin update that is not work for along time(Connecting to the update server). So why should i do this problem. Please help me.

    Update process is not work

    See:
    * [[Software Update Failed]]
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder.<br />
    You may need to delete active-update.xml and updates.xml as well if present.
    C:\Users\&lt;user&gt;\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

  • Update process does not work on Tabular Form

    Hello,
    I have 2 tabular forms on one page, which are using manual update processes.
    First form is created using wizard, and therefore works perfectly.
    The update process is as follows:
    DECLARE
      lc_string VARCHAR2(4000);
    BEGIN
      FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
      LOOP
         lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
      END LOOP;
      --Database processing using the concatenated string here
    END;Second form is created manually, using the following code:
    SELECT apex_item.checkbox (30,
                               '#ROWNUM#',
                               'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
                               NULL,
                               'f30_' || '#ROWNUM#'
                              ) delete_checkbox,
           CATALOG_ID,
              apex_item.hidden (31, CATALOG_ID)
           || apex_item.text (32,
                              LANG,
                              80,
                              100,
                              'style="width:100px"',
                              'f32_' || '#ROWNUM#'
           || apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
           apex_item.text (34,
                           DESCRIPTION,
                           80,
                           100,
                           'style="width:255px"',
                           'f34_' || '#ROWNUM#'
                          ) DESCRIPTION
      FROM V_CATALOGS
    UNION ALL
    SELECT     apex_item.checkbox
                              (30,
                               TO_NUMBER(9900 + LEVEL),
                               'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
                               NULL,
                               'f30_' || TO_NUMBER (9900 + LEVEL)
                              ) delete_checkbox,
               NULL,
                  apex_item.hidden (31, NULL)
               || apex_item.text (32,
                                  NULL,
                                  80,
                                  100,
                                  'style="width:100px"',
                                  'f32_' || TO_NUMBER (9900 + LEVEL)
               || apex_item.hidden (33, NULL) LANG,
               apex_item.text
                                               (34,
                                                NULL,
                                                80,
                                                100,
                                                'style="width:255px" '  ,
                                                'f34_'
                                                || TO_NUMBER (9900 + LEVEL)
                                               ) DESCRIPTION
          FROM DUAL
         WHERE :P18_TEMP = 'ADD_ROWS1'
    CONNECT BY LEVEL <= 1However, the update process does not work on this form.
    I created it using the first one as an example, but with the id's of the second form:
    DECLARE
      lc_string VARCHAR2(4000);
    BEGIN
      FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
      LOOP
         lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
      END LOOP;
      --Database processing using the concatenated string here
    END;Also, both forms are opening in a modal pop-up dialog window.
    I use a Dialog Region plug-in for that.
    Please advise, what is causing a problem with update?

    Sloger,
    if this is your tabular form
    SELECT apex_item.checkbox (30,
    ...and this is your update statement
    FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
    ...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
    Thanks,
    Tyson Jouglet

  • During the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

    during the io 5 update process, my iphone 3gs froze and now will shut off and turn on by itself, and will not allow me to unlock the phone or do anything with it. how do i fix this?

    Follow the instructions here > http://support.apple.com/kb/HT1808
    You may need to try a few times to get it to work

  • Update of software for iPad was interrupted and the iPad is now locked up.  Any ideas for how to re-start the update process?

    Hi all,
    I was updating the software on my iPad2 and while trying to multitask stopped the update process.  My iPad is now locked up and unresponsive.  Does anyone have ideas about how to re-load the update?

    You will need to hold down the power + sleep button, wait for restart, then hold home.  iTunes should then be in DFU mode.  Once in DFU mode connect to iTunes and click "Restore".  PRESTO!
    BF

  • Missing iPhone backup in iTunes from iOS5 update. What happens to the backup files from the update process?

    My PC had a BSOD while restoring my data.  After I restarted, opened iTunes, and connected my phone, the restore did not resume. (I have seen the restore process resume after an interruption.)  I tried to manually restore the data, but iTunes does not list the backup that was taken during the update process.  Is this backup stored in a different location or format?  Is there a way I can get my data back?  I tried an extraction tool from the web and it didn't detect the backup from the update.

    Same with me; I only found one backup dating back from august; tried that and works fine. But missing all my pics/vids in between. I have been searching my pc for files that were created on the day of the OS upgrade, but could not figure out any backups...
    Any help?
    iPhone 4, Windows 7

  • HT4623 How can I update my iphone 4 from iOS 5.1.1 to iOS 6.1.4 only.  I am not looking for iOS 7 right now.  Please suggest the update process?

    Hi Team,
    I have iphone4 16GB with iOS 5.1.1.  While using the phone, few times the phone is automatically going to shutdown and getting call disconnected.  Some times, it happens more frequently in a day, sometimes not. 
    and also, How can I update my iphone 4 from iOS 5.1.1 to iOS 6.1.4 only.  I am not looking for iOS 7 right now.  Please suggest the update process?

    You cannot. You can only upgrade to the currently supported version of the iOS which, at this time is iOS 7.0.2.

  • Updated My ipod touch 4th gen to IOS 6.1. Now everytime I try to finish the update process I get a message " Apple ID couldn't be created because of a server error"

    Now everytime I try to finish the update process I get a message " Apple ID couldn't be created because of a server error. I already have an apple ID I am just trying to finish the update so I can use my ipod touch and can not figure out why I keep getting held back at this message

    So I found out with alittle research that instead of entering all that info on my ipod, security questions, birthday, ect that it was much easier to just go to http://appleid.apple.com and place all that info there and save it than try the process on my ipod and it finished the update.

  • Adobe update process fails due to Error 130200. solutions please

    adobe update process fails due to Error 130200. solutions please.  Shyam

    Is there anything else beside the number 130200?
    Try downloading the update from http://www.adobe.com/downloads/updates/
    If you still need help, please tell us your operating system details.

  • Alternative for BAPI_REQUISITION_CHANGE, to run this in update process.

    Hi,
         I'm using BAPI_REQUISITION_CHANGE, to change a purchase requisition Qty related to a purchase order. This Bapi is used in a report program which inturn is triggered by an output type, on Purchase Order creation.
    Now, when this BAPI is executed, it ends up in dump saying "Invalid COMMIT WORK in an update function module".
    The search criterion it gave was ..
    "COMMIT_IN_POSTING" C
    "SAPLBAPT" or "LBAPTU05"
    "TRANSACTION_END"
    And the error analysis as
    Calling a COMMIT WORK in an update process is not allowed
    because the function modules triggered in a Logical Unit
    of Work cannot then be processed correctly.
    This clearly shows that commit is being done inside the BAPI. Is there any other way that I can update Purchase Requisition Qty?
    Thanks for your time on this.
    Regards,
    Srikanth Peri

    Hi,
       This issue is now resolved. I have found BAPI_PR_CHANGE and tried using it. It works perfectly in update mode.
    Thanks and apologies for your time on this.
    Regards,
    Srikanth Peri

Maybe you are looking for

  • Is it possible to have two apple id's on one computer?

    I have an ID and my daughter has one as well. I would like to share music with her. Is this possible if we both have our own ID's? Essentially I want to connect both of our Ipods to my computer and keep all of our music in one place.

  • Cost value for third party sales order scenario

    Greetings, I have a cost question involving the Third Party Sales Order (Item category TAS). At billing (VF01), the cost being picked up by the system are the value from the PO (PBXX condition type). I would like the system to pick up the entire  COG

  • Itunes import only plays 1 song from album

    I just imported an album to my ipod following a purchaese from itunes. When i moved the songs to my ipod only 1 song will play. If i select another song the ipod always takes me back to the song it only wants to play from this album. Btw the songs do

  • New pdf file

    How do I start a new pdf document with adobe reader?

  • Kanaka Plug-in not working Lion

    Hi all, We just deployed Kanaka in a test environment preparing to go production. I can login fine using the Client, but can not login utilizing the plugin. We installed on OES2 SP3. Anyone else experiencing this issue? Being in the K-12 workspace, h