MSI Megaview 566 Problems while startup...

Hi guys! i have a MSI Megaview 566 and i can't startup them, when i power on the player appears the "my style inside" intro video and later the LCD turns a little opaque and the image gets freeze in the logo of the msi and the "my style inside" frame but nothing more happens, just get freeze in the intro logo...
Now, i'm gonna tell what happens before, i was copying a video (divx) in the player from a cd, them the cd-rom stops because the cd it was damaged at the end, and i just cancel the copying process in the windows explorer (i have winxp sp2), later i plug out the usb cable from the player to view if the video archive it was copied, and it was copied but it was duplicated... them i power off the player and power on again and check the video folder once again in the player and still was duplicated, them i plug the usb cable to check the folder from the windows explorer and it was duplicated too, so i try to delete one of them from the windows explorer and get an crtitical error, so i try to delete the other one video and once again i gets an error message, so i plug out the usb cable and enter in the video folder from the player os, and try to delete once again, them... the file at least was deleted, so i delete the other one (duplicate) video file and the player do it, so i power off the megaview player and power on again to check the video folder and still are one of the video files...so i reboot once again the megaview and them cant startup the player... just appears the intro video and nothing more happens, the image gets freeze and now the player cant be recognized by the pc.
Anyone did haved this problem before? any help? what can i do? how can i reset the system from the player? i try the 516 method (https://forum-en.msi.com/index.php?topic=83015.0) but dont work for this player.
Thanks to all that can help me to resolve my problem
BTW: Sorry for my english doesn't are my native language so i hope that this post can be "readly"

Quote from: Tiresmoke on 15-March-06, 05:54:54
Did you try pressing and holding the play key while you plug it into the PC?
Yes i try it and dont work for me... i press the play button and hold down and plug the usb cable and nothing happens... even pressing the play button repeatedly and dont work again, my megaview566 just stays freeze in the last frame of the intro video... anyone knows how to format the hard disk by DOS or something like that?

Similar Messages

MSI Megaview 566 & Digital Rights Management files

I was wondering if someone could help me. I downloaded a music file (wma format, 256 kbps) and copied it to my Megaview 566, but it won't play. The supplier says that the media player that the song is copied to must be Digital Rights Management (DRM) compatible. Is the 566 DRM compatible, and what can I do to get downloaded songs to play?
Thanks in advance.

MS-5566 didn’t support WMA with DRM audio files, but I have a solution for you reference, when you download music, you can burn to CD and use “Windows Media Player 10” to transfer WMA V9 format, because 5566 can support WMA V9 audio format!!
Transferring WMA format procedure by “Windows Media Player 10”
1. Open Windows Media Player 10.
2. Go to tools\Option\ Rip Music\ Rip Settings and selected.
3. Insert CD audio and start ripping.

Problem while startup of OC4J_BPEL component in Oracle AS.

Hi,
I had changed the server startup parameters to avoid out of memory error by increasing the java heap size in OraHome_1\opmn\conf\opmn.xml like following:
-server -Xrs –Xms1G –Xmx1G -Djava.security.policy=D:\OraHome_1\j2ee\OC4J_BPEL\config\java2.policy -Desb.home=e:/esb -Djava.awt.headless=true -Dorabpel.home=D:\OraHome_1\integration\orabpel -Doc4j.userThreads=true -Xbootclasspath^/p:D:\OraHome_1\integration\orabpel/lib/orabpel-boot.jar;D:\OraHome_1\integration\orabpel/lib/connector15.jar -Djava.net.preferIPv4Stack=true -server –Xms1G -XmxG -Doracle.mdb.fastUndeploy=60
Now the problem is while starting up the server, opmn.xml is overridden with default values like following:
-server â€“Xms128m â€“Xmx512m -Xrs -Djava.security.policy=G:\OraHome_3\j2ee\OC4J_BPEL\config\java2.policy -Djava.awt.headless=true -Dorabpel.home=G:\OraHome_3\integration\orabpel -Doc4j.userThreads=true -Djava.net.preferIPv4Stack=true -server -Xms256M -Xmx512M -Doracle.mdb.fastUndeploy=60 -Xbootclasspath^/p:G:\OraHome_3\integration\orabpel/lib/orabpel-boot.jar;G:\OraHome_3\integration\orabpel/lib/connector15.jar
I think these default values are archived in some configuration file. And while changing the java heap size parameters, it has been changed from Unicode format to ASCII format. When I delete the â€“Xms128m â€“Xmx512m from start-up parameters, then OC4J_BPEL is working fine. But if again I restart the application server and all components it is giving the same problem.
Is opmn.xml is the right file to increase the java heap size or Where can I update the default values to permanently fix this problem?
Thanks
-Vidya

Not familiar w/ 11.0.28, but if this is on NT, I've found you need to add your xx_top path to the appropriate place in the NT registry.

Problem while startup of tomcat

iam getting this error
The system cannot find the file -Djava.endorsed.dirs=.
why this is so.

iam getting this error
The system cannot find the file
-Djava.endorsed.dirs=.
why this is so.by running setclasspath file and then startup it get started but it is now not closing.it is giving error:
C:\Tomcat 4.1\bin>shutdown
Using CATALINA_BASE: ..
Using CATALINA_HOME: ..
Using CATALINA_TMPDIR: ..\temp
Using JAVA_HOME: c\j2sdk1.4.0
Catalina.stop: java.net.ConnectException: Connection refused: connect
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:295)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:161)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:148)
at java.net.Socket.connect(Socket.java:425)
at java.net.Socket.connect(Socket.java:375)
at java.net.Socket.<init>(Socket.java:290)
at java.net.Socket.<init>(Socket.java:118)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:581)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:402)
at org.apache.catalina.startup.Catalina.process(Catalina.java:180)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203)
tell me the bug in procedure or somewhere else

Database connection problem while startup

Hi Guru
My oracle database version is 10.2.0.3 in AIX 6.1. I have created a database through DBCA but not able to connect from host. error is as under
$ export ORACLE_SID=rmancat
$ sqlplus '/as sysdba'
SQL*Plus: Release 10.2.0.3.0 - Production on Tue May 3 11:26:14 2011
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
ERROR:
ORA-01031: insufficient privileges
Enter user-name:
Please guide me in this regards
Rabi

Hi Sybrand
Please do not answer this type of question.
By answering this question you endorse abuse of this forum.I agree wiht you, i face same issue many time at EBS forum site,linux,db installation upgrade etc..Some of Posters many times dont read anything or dont make any search for their issue. Mostly they just make posts in forum sides for their questions wihtout any search. I agree wiht your words again because many posters expect we read something for them and give solution for them which is very bad. Those cycle has been exist in past and it will be exists at future, because i belive its related wiht human behaviour and human behaviour doesnt change soo quickly
But i am not aggree wiht "do not answer this type questions" part. I belive ppl should answer who have time or who wanna give response for those kind of questions. We are volunteer here and i belive we should try to help who wants to expect help from us. At least we should give them correct path like " try to use search mechanisim or try to use metalink or search engines", This is what i am thinking
Regard
Helios

Megaview 566 European Version - Newer Firmware

hello,
i´ve got a Megaview 566 in Germany where i live. Its called "Medion MD96000", "Medion MDVID 120" or "Micromaxx MDVID 120" here.
After some websearch i found out that it is the MSI Megaview 566 but with a different firmware. The latest firmware on the MSI-server is 1.261t.42 but the one i bought in Germany has firmware-version 1.274m.44 but you can change it with the original MSI firmware and back. It has support for languages like german, english, french, dutch and italian and looks quite differrent (menu-structure, loading-screen) from the original MSI firmware/software. So my question is, WHO programmed this firmware and is there a chance to get an even newer one from the company which made this (european)version (f.ex. with DIVX6 support a.s.o.)? The support of the german vendor is just lousy, there isn´t even this product on their website and the german MSI-Company does not sell the original Megaview 566 in Germany.

Please give me your email address, I will send the email to you with MS-5566 European edition!!
MS-5566 didn’t support DivX6 format, you can go to MSI website to view spec description!!
(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=611)

Problem during startup of NWDS - Error while opening NWDS -

Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:2330)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
     at org.eclipse.swt.widgets.Display.release(Display.java:1782)
     at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi nayab,
                 Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit

Severe problem while starting Lenovo 3000 N200

Dear friends & experts,
I am using Lenovo 3000N200 0769BDG laptop. I have following problems while starting the system.
Recently my system was hacked against which I installed an Anti-Malware software. It showed that the system was free from any Malware.(But believe me, it is true that the system was hacked.). But each time on starting the system, a black and white window is being displayed which contains the following message:
We apologize for the inconvenience, but Windows didnot start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed , or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight to your choice.
Seconds until Windows starts:30.....1
After 30 seconds, the Windows logo is displayed immediately followed by a Blue screen which lasts for 1 second and the system restarts. I tried all the options listed above-- from Safe Mode to Start Windows Normally but the same problem recurrs. And the system doesn't shutdown until I press the power button.
I have a licensed version of Windows Xp SP3 as OS. I tried to repair the system using WinXP CD but I found the following message:
Setup did not find any hard disk drives installed in your computer.
Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
Setup cannot continue. To quit Setup, press F3.
A point to be noted is that earlier, I removed the Rescue & Recovery from my system thinking that it might not be of much use and now, I lament for it.
When I press F3 the same window appeared and the same problem recurred.
I tried to access the files in my hard disk using Ubuntu CD and it was successful. I used Lenovo hardware quick test to check for any hardware faults, and my system passed all the tests.
I request you to help me in solving this problem so that I can continue my studies peacefully.
Thanking you,
With regards,
T.I. Kiran

First off, being "hacked" and having viruses/malware are two different things. Someone hacking your computer doesn't really mean you have a virus/malware, it means an actual person gained access to your computer remotely and did something to it.
More than likely you got a virus that corrupt your Windows System directory and/or registry. Anti-malware software won't necescarily detect all viruses, especially executable that run commands to simply delete files.
The blue screen you're seeing is what us technicians call the BSOD (blue screen of death), it's an indication that there is a direct corruption with the core files that Windows requires to function properly.
As an IT Technician, if this were one of my laptops or one of my end-users, I would simply reload it with a fresh copy of Windows XP. There's a possiblity that all data you had on the laptop is gone because if the Windows core files are corrupt/missing, then that could very well mean your system was wiped completely but the boot table is in tact, hence the fact that you even have the option to boot Windows XP.
One other option I would suggest is try to reinstall Windows XP. Sometimes if you have the right copy of the install, it will let you reinstall the Windows XP core files, leaving your programs, files and directories in tact.
Good luck.

I am facing problem while installing addon

I am facing problem while addon installation
Steps that i follow
1. Develop Custom Application in VB.Net.
2. Created Setup Wizard.
3. Create ARD File.
4. I start the SAP B1 - Administrator - Add On Administration.
When I specify this ard file it is trying to install the add-on. after few second it flashes the mession that it could not file myaddon.msi file in temp folder of windows. After this when i close that dialog box. it contiune with installation (may be in silent mode). it takes near about 1/2 an hour and after completing this setup it shows error of installation failed.
I don't why it is happening. Any solution for it.
Please Help Me.....

Hi Owen,
I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
I was trying to understand the code that it creates. I won't be able get the code also.
I would like to go from other way apart from B1DE.
Need Urgent Help...

Problem while starting DBConsole in windows?

Hi ,
Here i am facing problem while starting "OracleDBConsoleoracle". oracle is my oracle_sid.
when am trying to start this service from services in windows it is showing the error... please see the below link..
http://picasaweb.google.co.in/rajeshbalusu/Oracle
can anybody suggest me what is the problem?
My S/W Details..
OS : Windows XP Professional Version 2002 Service Pack 3
Database : Oracle 10gR2
Thanks
Rajesh

rajeshbalusu wrote:
Hi ,
Here i am facing problem while starting "OracleDBConsoleoracle". oracle is my oracle_sid.
when am trying to start this service from services in windows it is showing the error... please see the below link..
http://picasaweb.google.co.in/rajeshbalusu/Oracle
can anybody suggest me what is the problem?
My S/W Details..
OS : Windows XP Professional Version 2002 Service Pack 3
Database : Oracle 10gR2
Thanks
RajeshPlease check Event Viewer to find out the error raised during startup of the specific service

Error while startup: msvcrt.dll missing

Hi,
on some boxes (maybe windows 2000 ) we get a error while startup: msvcrt71.dll missing ...
whatÂ´s the problem ?

Andre,
since this is difficult to answer without a detailed description of the use
case, could you please post information about the how and what you are
trying to start, i.e. the command line, the operating system and what
version of JRockit you are using and have installed.
The file msvcr71.dll is needed by a few launchers and libraries inside the
JRockit JDK but those cases should be covered if launching using e.g.
java.exe. The only case that comes to mind is if you are trying to load the
jvm.dll directly, if that is the case you should copy
<jrockit-jdk>/jre/bin/msvcr71.dll to
<jrockit-jdk>/jre/bin/jrockit/msvcr71.dll to see if it helps.
Best Regards
/Robert
<Andre Frintrop> wrote in message news:[email protected]..
Hi,
on some boxes (maybe windows 2000 ) we get a error while startup:
msvcrt71.dll missing ...
what??s the problem ?

Megaview 566 - software update ???

Hi,
I just bought a megaview 566, which actually is a good product, but there are some features missing in the mp3 player (playlist management, additionnal classification and global random for instance) that could have make it a very good product.
So if anybody knows when a new firmware release is planned or how to "push" MSI to do so just tell !!

actually my German version of the software supports playlists.... but I can't delete Stuff without the PC, browsing sucks and there's no radio
tell me if you'd like me to upload my version... I'd appreciate you uploading your firmware in return
tia,
exter
p.s. you can switch between various lamguages

Problems with Startup Manager

I started having frequent crashes on my Powerbook G4 running OS 10.3.9. I wanted to verify the hard disk, so I booted off of the only installation CD I could find (an old 10.1 CD). Booting off this disk worked initially and I launched Disk Utility. For some reason, however, the 'repair' and 'verify' buttons were grayed out when I selected my laptop's hard disk.
The problem has since gotten worse. I rebooted and now the blinking question mark comes up telling me it can't find a startup disk even though the CD is in the drive. I held down option to access the startup manager, but no icons appear there -- neither my hard disk nor the installation CD. It's just the refresh arrow and the right arrow with nothing in between. I've tried ejecting and reinserting the CD while startup manager was running. I hit the circular arrow to refresh. I've tried zapping the PRAM. I've held down X during startup. I've also tried holding C with the CD in. Nothing seems to work.
Help!
-Andy
Powerbook G4 Mac OS X (10.3.9)

Confirmed this problem is related to the nvidia graphics card. Startup manger worked normally with the orginal Radeon card installed. Given that there are options for booting into Bootcamp, I've reinstalled the GTX 680 and will continue to use it. Hopefully there will be a fix for this at some point in the future.
Additional info:
nvidia Geforce GTX 680, EVGA P/N 02G-P4-2684-KR
MAC display connected to display port using Gefen adapter ADA-DP-2-MDPF
Second monitor connected to HDMI
System info:
Chipset Model:
NVIDIA GeForce GTX 680
Type:
GPU
Bus:
PCIe
Slot:
Slot-1
PCIe Lane Width:
x16
VRAM (Total):
2048 MB
Vendor:
NVIDIA (0x10de)
Device ID:
0x1180
Revision ID:
0x00a2
ROM Revision:
preset 1.0.0
Displays:
LED Cinema Display:
Display Type:
LCD
Resolution:
2560 x 1440
Pixel Depth:
32-Bit Color (ARGB8888)
Display Serial Number:
2A0405CZ6JL
Main Display:
Yes
Mirror:
Off
Online:
Yes
Rotation:
Supported
Connection Type:
DisplayPort
SAMSUNG:
Resolution:
1920 x 1080 @ 60 Hz
Pixel Depth:
32-Bit Color (ARGB8888)
Mirror:
Off
Online:
Yes
Rotation:
Supported
Television:
Yes

MSI cycling fan problem, any solution in sight?

Have msi wind top ae 2430 non 3d, fully updated. Problem: At startup or wakeup the fan starts cycling, revs up to vacuumcleaning level and then dies down to a stop, then revs up again. This annoying behaviour continues for some 5-10 minutes before it settles down at normal almost silent noise level. Seems not to have with high temperatures to do as its settles when warm. Cant find any bios setting regarding fans or temperatures. Tried other fan control software, but no fanspeeds/temperatures/volt settings are reported. How do you get control over the built in fan? How was it controlled at delivery? Seen others with this problem, but never any solution. My whole family wakes up when the kitchen windtop does its thing in the middle of the night. Some loose fan control cable inside?
I previously got the answer that the fan can not be controlled, its automatic.
So today I came across a long forum thread about the same problem with MSI laptops, the GE60. ( https://forum-en.msi.com/index.php?topic=162459.0 )
Is the solution, the EC-reset descibed there applicable for other MSI systems as well? Is there really no way to control the fan?

MGW wrote:
The Community Hosts have fixed the problem, you should be able to stay logged in as long as the browser you use stays open, once you close it, you will be logged out.
That's not the case here. I've been logged out three times this afternoon already, without my having closed Firefox 3.6.19 under Tiger 10.4.11. I'm within roughly 100 miles of Apple Headquarters in Cupertino.
Please don't interpret this as a complaint against Apple or the forums. I'm familiar with the miserable performance of Jive software.
CORRECTED: Firefox 3.6.19
Message was edited by: Ramón G Castañeda

Problem while dropping a table

Dear All,
I am facing a problem while dropping a table in Oracle 10g.
I am able to find the number of records in the table but unble to delete it.
SQL> select count(*) from merchant_audit;
COUNT(*)
30028278
SQL> drop table merchant_audit;
drop table merchant_audit
ERROR at line 1:
ORA-00942: table or view does not exist
I have to drop this table from the database. Please help.
regards,
Santhosh

Hi,
IS it a table ? Is it your table ?
Read this example :
sqlplus scott/*****
SQL> create table merchant_audit(col1 number);
Table created.
SQL> create public synonym merchant_audit for merchant_audit;
Synonym created.
SQL> grant select on merchant_audit to merchant;
Grant succeeded.
SQL> conn merchant/merchant
Connected.
SQL> select count(*) from merchant_audit;
COUNT(*)
0
SQL> drop table merchant_audit;
drop table merchant_audit
ERROR at line 1:
ORA-00942: table or view does not exist
SQL>
See owner into the dba_tables, and if synonym into dba_synonyms.
Nicolas.
Message was edited by:
Nicolas Gasparotto

MSI Megaview 566 Problems while startup...

Similar Messages

Maybe you are looking for