MSI model series confusion.

At last, I find a forum that has the information I wanted before buying an MSI laptop! One Question though. What do the letters after the model represent, ie 2PC,2PE ect etc? Im looking at buying a mid range gaming laptop, in the GE series, however the letters above do create confusion on my part!?

The difference between 2PC and 2PE is about the detail of the spec. E series have slightly better storage volume or graphic performance on the same level. Regarding 2Qx series, Q seems represeting those NVIDIA 9xx series of graphics cards, and P seems representing 8xx.
You just need to make sure which model you want first. GT, GE, GP or GS?
Once selected, then check the detail of each subnames, 2PC or 2PE, to see the detail of the spect and decide which one matches your requirement.

Similar Messages

VBios Medion Erazer x7821x equal to MSI GT70 Series

Hi,
I watches this Forum for some time and i hope someone (eventually "Svet") can help me.
I have a Medion Erazer x7821 with GForce Gtx 670mx. This Notebook should base on the MSI GT70 Series.
My big Problem is the locked vBios of the GTX 670mx. With the original vBios its impossible to overclock the Card. MSI Afterburner shows no usable results and NVidia Inspector let me adjust the clock but every time i try to accept the changes the controls jumps back to normal (if i try to underclock the card with NVidia Inspector the changes are accepted). So i think the overclocking is completely blocked by the vbios.
I saved the vBios and try to edit it with "Kepler BIOS Tweaker v.1.25". On opening the saved ROM i become an Error and the programm closed (tried on Win8 and Win7) so i have no chance to see the real content of the File.
I got the 1,5GB Model GTX 670mx actual BIOS Version:
Version:80.04.5B.00.A5 ID:10DE:11A1:1462:10D9
GK104 Board - 2051b003 (Normal Board)
GeForce GTX 670MX (10DE,11A1,1462,10D9) H:--:NRM B:01,PCI,D:00,F:00
Thanks
P.S.: Please forgive my bad english totay... had a looong night *lol*

This is an MSI forum. It only covers MSI retail products and no Medion products no matter what oem products Medion used.
Contact Medion.
-- TOPIC LOCKED --

MSI Mega series girder plugin version 2.0 available

Hallo
EDIT:
There is a new version out: check here for details of the version 2.
I'm proud to release the first version of my MSI Mega series plugin for girder 3.2. Thank for all the reported bugs :-). I implemented a new feature to set the time resolution of the remote control. People with the new firmware will enjoy the gained flexibility. Current version is 1.0.0.70.
Where to get the plugin?
The plugin can be downloaded from my webpage. Check out http://n.ethz.ch/student/nschmid/MSIStuff for details :-) - [See note below]
Which hardware is supported?
MSI MEGA series front IR controller. It has been tested with MSI MEGA 180/865/651.
What software do I have to install to use the plugin?
Girder version 3.2. Buy it at http://www.girder.nl ~20$
DLLs: MSIDrvIF.dll, ForMpc.dll. They come with MSI MediaCenter III Deluxe. Search for it.
How do I install it?
Copy "MSIGirderPlugin.dll" from the "bin" directory into your girder plugin folder.
Copy "MSIDrvIF.dll", "ForMpc.dll" from your MSI Media Center III directory into the girder folder.
What does it cost?
Of course nothing.
How to report bugs?
Check out the webpage for details.
I hope you enjoy it. Developing will go on :-)
Best regards
Nathan
EDIT by Stu: The plugin is now attached to this post and can be downloaded from here now. :hat tip:
[ ERROR: SPECIFIED ATTACHMENT MISSING ]

Sure.
You have to install MSI Media Center because it installs the driver for the plugin. The required DLLs are not sufficient because ForMpc.dll need mpcsys.sys and assosciated files. I couldn't figure out all the dependencies but with the installation you got all you need.
1.) Now you can launch setup.exe and it should install everything automatically.
If that don't work: Copy MsiDrvIF.dll and ForMpc.dll form your Media Center installation into the girder directory (normally C:\Program Files\girder) and MSIGirderPlugin.dll from my release into the girder plugin directory (C:\Program Files\girder\plugins). That's the system part.
2.) Now launch Girder and open settings. In the plugins tab search for the "MSI Mega series" entry in the list. If it's not listed you did something wrong into step 1. If it is listed check the checkbox left of the plugin. Then also check "Auto Enable Input device". Restart girder.
Create a new command (CTRL+ALT+A) click on it and on the right side of the window select the Plugins tab and click there on MSI mega series. Then click on Settings. As Time resolution enter 250 (a quarter second - depends on firmware of Bluebird VL+). As model select your model. Press on OK.
Restart girder - your settings will apply.
3.) Now when girder is opened again you can press the remote and check if the LED on the right side of the status bar changes color. If that is so everything is ok. If not: Check all steps again.
4.) If you want to launch my sample configuration: Go to girder website and download the Popup OSD plugin by Mark Fiechtner and install it as written in the readme file of Popup OSD. Launch girder and go to the plugins tab in the settings. Check AlarmTimer and Popup OSD there. The sample file should work now. Unfortunatly you have to rerecord some of the makros because the version of winamp or PowerDVD are perhaps not the same as in my computer.
For this stuff please post in girder forum. I don't support the sample file.
Hope that helps
Regards
Nathan

Let's ask HP to categorize support forum for every product model or at least every model series

Hi all HP fans!
I really wonder why not HP Support Forum is not categorized by every product model or at least model series to help customers post issues in apropriate group and helpers don't get confused in thousands of unrelated questions.
Regards
AlizzA

Because they don't care...
I've been a service tech for 18 years repairing HP products, from Laserjets to Designjets and I used their technical support web site and phone support for help when I was stuck.
In the early years Tech Support was great! They were a knowledgeable and helpful team of bright people.
This was when HP had direction and vision.
They cared about the customer, the customer's satisfaction and the companies image.
Not any more.
Just look at the piles and piles of ticked off people ranting about HP's Customer Support...it's shameful!
HP pumps out new products faster than ever, dropping support for relatively new products and leaving customers and 3rd party support providers out in the cold.
They put up self-help websites like this one to make themselves feel better.
We've moved on to Canon products and let me tell you...we've never looked back!
Customer and tech support are second to none as well as the products!
Message Edited by MudSlinger7 on 11-02-2009 05:24 PM

MSI N9800GTX Series Available

Triple output of most powerful GeForce® 9800 GPU
MSI N9800GTX Series, 3-Way SLI ready to roll
Details: http://global.msi.com.tw/index.php?func=newsdesc&news_no=598
>>><a href="http://global.msi.com.tw/index.php?func=proddesc&prod_no=1439&maincat_no=130&cat2_no=136>N9800GTX-T2D512[/url]<<<
>>><a href="http://global.msi.com.tw/index.php?func=proddesc&prod_no=1448&maincat_no=130&cat2_no=136#>N9800GTX-T2D512-OC[/url]<<<

Triple output of most powerful GeForce® 9800 GPU
MSI N9800GTX Series, 3-Way SLI ready to roll
Details: http://global.msi.com.tw/index.php?func=newsdesc&news_no=598
>>><a href="http://global.msi.com.tw/index.php?func=proddesc&prod_no=1439&maincat_no=130&cat2_no=136>N9800GTX-T2D512[/url]<<<
>>><a href="http://global.msi.com.tw/index.php?func=proddesc&prod_no=1448&maincat_no=130&cat2_no=136#>N9800GTX-T2D512-OC[/url]<<<

Desesperately looking for ms-6786 ver:2 manual (or msi model corresponding)

hi
after looking all over there i could't find the track to this "old board" manual ...
worst of all is that this board comes from a used sell so : i have absolutely no idea
about the msi model corresponding to this oem (ms-6786 ver 2 is said unknown everywhere
on msi site)
if somebody would heelp about this...
(and no it is not a kt4M... )
thanks !

refer http://www.kabinet.cz/stuff/hw/motherboard_MSI_MS-6786_ver2_Quasar2/Support%20Packard%20Bell%20Quasar2%20(MS6786)%20KM400A%20ver%202.0%20-%20spec_quasar2%20-%20Core.htm
This is a Packard Bell OEM board. You need to contact them for support.
Topic locked

MSI GE Series GE60 Apache-469

Hello everyone. Hope someone can provide an image for this product. I'm quite interested in the product but newegg doesn't seem to have an image for it. Does anyone know what this laptop looks like?
MSI GE Series GE60 Apache-469
http://www.newegg.com/Product/Product.aspx?Item=N82E16834152625&cm_re=ddr5-_-34-152-625-_-Product

According to the Spec and overview page of the newegg link, it should be GE60 2PC Apache.
http://www.msi.com/product/nb/GE60-2PC-Apache.html#hero-overview

I have model series KX TG7641 /w 5 phones.... My questions: 1. Can the directory of phone numbers with in my iPhone be transferred to the Panasonic and retain the individual number designations; i.e., "home-moblie-work-etc"? 2. Can I use the manual sele

I have model series KX TG7641 /w 5 phones....
My questions:
1. Can the directory of phone numbers with in my iPhone be transferred to the Panasonic and retain the individual number designations; i.e., "home-moblie-work-etc"?
2. Can I use the manual select on the Panasonic to selectively transfer numbers from my iPhone?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
FYI, there are no viruses that affect iOS unless the device has been hacked or jailbroken, in which case they cannot be discussed here.

MSI K9N2 series at launch

New MSI K9N2 series motherboard
Best Performance Gaming Solution on AM2+ Platform
Details: http://www.msi.eu/news/press/2008/PR_K9N2/PR_K9N2.html
and info from MSI Taiwan:
http://translate.google.com/translate?u=http%3A%2F%2Ftaiwan.msi.com.tw%2Findex.php%3Ffunc%3Dnewsdesc%26news_no%3D635&langpair=zh%7Cen&hl=EN&ie=UTF-8

Quote from: kamalmawa on 19-April-08, 05:27:27
Released in Global site...
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1438&maincat_no=1&cat2_no=171
Quote from: BOSSKILLER on 18-April-08, 14:31:51
>>>K9N2 Diamond<<< is now available

MSI MODEL PM8M-V {MS-7104}-SYSTEM WILL BOOT,BUT WILL NOT BOOT TO OPERATING SYSTE

HI-NEW HERE SO EXCUSE ANY REPEATS-I JUST BOUGHT A MSI MODEL PM8M-V{MS-7104} MOTHERBOARD SOCKET 478,USING A CELERON 2.60 GZH PROCESSOR
I'VE INSTALLED WINDOWS XP HOME TWICE,BUT EACH TIME SYSTEM HAS TO BE RESTARTED IT GOES THROUGH BOOT PROCESS-IT DETECTS THE HARD DRIVE AND THE PCI DEVICE LISTINGS,BUT AT THE LAST PART OF THE BOOT WHEN IT READS "VERIFING DMI POOL DATA"-IT THEN SHOWS BOOT FROM CD,BECAUSE WINDOWS IS INSTALLED THERE IS NO XP DISK IN CD-ROM DRIVE,SO WHEN "BOOT FROM CD" IS SHOWN I DO NOTHING BUT WAIT.IT THEN COMES BACK DISPLAYING-"DISK BOOT FAILURE,INSERT SYSTEM DISK AND PRESS ENTER"-SO AT THIS POINT I PUT IN THE WINDOWS XP DISK AND HIT ENTER-THEN AND ONLY THEN WILL IT TAKE ME TO THE WINDOWS DESKTOP.I'VE TRY TO LOOK FOR A NEWER BIOS SETTING BUT MSI SHOWS NONE.
THIS IS THE INFO. FROM START-UP W7104 VMS V3.4 022206
IF ANYONE HAS HAD THIS PROBLEM OR KNOWS OF ANYTHING TO TRY .PLEASE,PLEASE TRY TO HELP ME IN FIXING THIS
I WOULD SURELY APPRECIATE THIS
BEE743

Quote from: bee743 on 04-March-07, 01:06:57
Hi-Thanks for the quick reply,and sorry for the all CAPS.I did what you suggested,and it worked!!You are the Man!!
On some of my other machines I always have the boot to cd-,as first and then h.d. as one of the last,but i've never had to go back in bios to change to h.d. as the first.Is there any reason for this?
One other thing,it seems that the boot process takes longer than i normally wait on,on other machines,is this anything to be concerned with?
Once again,thank you for your knowledge and help.
"One other thing,it seems that the boot process takes longer than i normally wait on,on other machines,is this anything to be concerned with?"
perhaps no, can be just slow initialisation(enable "quick boot", disable floppy drive seek to speedup boot time a bit.
"On some of my other machines I always have the boot to cd-,as first and then h.d. as one of the last,but i've never had to go back in bios to change to h.d. as the first.Is there any reason for this?"
well if the CD are blank or CD in drive is not bootable, boot process will continue with 2nd assigned boot device.(probably you don't have hdd configured as 2nd boot choice)(try to boot from other device should be enabled from BIOS as well). also if there is no respond(no user action taken due few seconds) at "press any key to boot from CD" boot from CD will be skipped automatically and boot process will be forwarded to second boot selection..
"Hi-Thanks for the quick reply,and sorry for the all CAPS.I did what you suggested,and it worked!!You are the Man!!
Once again,thank you for your knowledge and help."
you are welcome.

MSI GX Series - Disable Enduro with Unlocked BIOS

Dear Friends
Are there any possibility to disable Enduro such way there will be only discrete GPU over integrated GPU?
If it's not an information for public eyes, but someone know how to do that with Unlocked BIOS in MSI GX Series, I will be glad to hear it via PM.
Thank you in advance for your support.
Sincerely

Vamet, do you still have this notebook ? Which is you impression after a couple of months ?
Sent from my SM-N9005 using Tapatalk

MOVED: How to turn on virtualization technology in msi model ms-16g5

This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=173628.0

Satellite C655D-S5210
Toshiba support said that my model supported virtualization..
If Toshiba support says it's there, then you should be talking to them.
So far as I know, the Satellite series (Toshiba's lowest level) does not usually have a BIOS that supports hardware vitualization.
But it's not necessary in order to run XP Mode. See the workaround here.
Error message about hardware-assisted virtualization for Windows XP Mode in Windows Virtual PC on a ...
-Jerry

MOVED: Nahimic Audio Enchancer is available in msi ge series laptop ???

This topic has been moved to GAMING Notebooks.
https://forum-en.msi.com/index.php?topic=254305.0

What's your model?
GE60 or GE70?
0Nx, 2Ox, or 2Px series?
Currently Nahimic is only for newer models such as GE62 or GE72. It requires a specific version of Realtek audio drivers.

Flash security model; completely confused

Really, does anybody understand it? Every article I read that
allows comments, litterelly each comment is one person saying how
the the previous person(s) are wrong in there interpretation of the
security model.
Flash 8 has been out for awhile now, and I've fully read
dozens of articles and every page in the user reference under AS2.0
> Learning AS2.0 > Understanding security, and I am still
utterly confused. Granted, I'm a bit slow with abstract
comprehension, but I'm getting nowehere. I'm trying to send POST
data to a remote server. Not trying to receive anything, just
sending POST. Can't seem to get it to work on a server. What do I
need to do?
What I really need is a detailed and concise XYZ list: if you
want to do X, you have to do ABCD, if you want to do Y, you have to
do AD, if you want to to Z, you have to do CBA, ect. In that way I
could at least figure out what it is I have to do, research how to
do that, and get somewhere. Instead I'm confronted with numerous
ways of handling security(allowScriptAccess,
System.security.allowDomain, ExternalInterface, superdomain
matching rules, creating serverside permission files, creating
local registration files, different behavior in different SWF
versions AND different behavior in different SWF Players! And much,
much more!) And can't figure out what I need to do.
(Sorry, got a bit ranty there... not blaming MM, it's not
their fault they had to incorperate security measure)
All I know is my SWF is not working. I want to be able to
send some POST data to a remote server, compatable with Flash
Player 6,7,and 8; I do not need to load any data. What must I do to
allow this?
Thanks for any guidence, it is much needed!

In my case, there was no receiving SWF, only a sending SWF to
a serverside page(.php or .asp or something, I don't remember).
I don't even remember what I did to get it to work(my OP was
5 months ago... clearly someone has been searching for answers on
Flash security, and, like me 5 months ago, have mostly found
unsolved/unhelpful questions :-) )... I think I created a
crossdomain.xml file. In the end, everything was deployed on the
same domain, I believe the same subdomain as well.
That is still a helpful tip, though... I'll try my best to
remember allowDomain() if I ever need cross-domain SWF-to-SWF
interaction.

Accu van MSI Gaming Series GP70 2PE-022NL stuk

Ik heb deze laptop nu sinds eind juni.
Van het begin af aan was de accu snel leeg, Maar nu is de accu helemaal leeg en wil ook niet meer opladen. Win8 geeft aan dat die 100% vol is, maar als ik de netvoeding er uit haal, gaat de laptop gelijk uit.
Ik heb de battery calibration ook al geprobeerd, maar dan gaat de laptop ook gelijk uit. Terwijl ik wel de netvoeding aan gesloten heb.
Ik heb inmiddels begrepen dat ik de laptop terug kan sturen en dat die dan binnen 2-3 weken weer terug komt.
Dit is geen optie voor mij, omdat ik deze laptop zakelijk gebruik en zonder laptop kan ik niet werken.
Weet iemand nog een suggestie of een webshop waar ik een nieuwe accu kan kopen?

Je kunt als het goed is via Register.msi.com gewoon een nieuwe accu aanvragen onder garantie. Eventueel kun je ook even contact opnemen met MSI zelf, op het volgende telefoon nummer en of email adres. Tevens zijn deze accu's ook bijna overal te koop, gewoon even googlen met de serie nummer van de accu zelf
[email protected] (Engels geschreven emails krijg je meestal een duidelijk antwoord op) of +31 854011315 als je liever belt.

MSI model series confusion.

Similar Messages

Maybe you are looking for