MSI MPOWER b2 or 62 debug code

I bought my 1st Mpower about a month ago and had to RMA it. I had/have the same problem as this user. https://forum-en.msi.com/index.php?topic=164766.0
I RMA'd the board because after hours of clearing cmos and swapping things around nothing worked. Now I get a new replacement and the same problem persists.
I have swapped the ram using 1 stick at a time, tried both one at a time. Cleared CMOS numerous times. I have had the board in and out of the case so not a grounding problem. I have tried on-board and and a GTX 560 gpu. There are 0 bent pins that I can see. CPU triangle is facing the correct way. My monitor says no signal and can't get into the bios (obviously). I also cannot tell if the debug led says a lowercase b2 or a 62, I assume it is b2.
Any help is appreciated this is very frustrating.
Board: MSI Z77 Mpower
PSU: XFX xxx edition 850w psu
CPU: Intel i7 3770k
MEM: G.SKILL Sniper Gaming Series 16GB (2 x 8GB)
HDD: 1tb caviar black
COOLER: stock for now
OC: none
OS: Win 8

Quote from: flobelix on 15-March-13, 05:09:55
There will always be people with similar problems but that doesn't help you with yours. If no possibility to test cpu there is no other way but to rma cpu or board and to see if it was the right component to rma.
This has happened twice with two board and someone on these forums and someone on toms hardware forums with the same cpu (3770k) and same board as me with the same led debug code. That's not a similar problem that's the exact same problem.

Similar Messages

MSI Z77 MPower - Boot issues (A2 debug code and more)

Hey guys,
I've been trying to get my new computer build working but I have encountered several issues when trying to boot the computer.
Before putting everything inside my case, I tested the motherboard + CPU + 1 stick of ram to make sure everything was working. I had issues in the past where I had to remove everything once I had things mounted.
Everything seemed to work and I got into the BIOS and looked like everything was good.
I mounted it in the case with the same configuration and I was able to get into the BIOS again. So I thought everything must be ok.
Fast forward a couple hours later after I finish plugging everything in, I try to turn it on but it just gets into this boot loop.
Turn on > Fans spin for a couple seconds > turns off > repeat. This just kept going on and on and I wasn't exactly sure what was going on.
I started to unplug components and when I only had the Mobo + CPU + 2 sticks of ram in I was able to get into the BIOS.
I plugged things in one at a time and when I plugged in my SSD it would work.. but when I added another drive I would start getting the A2 Debug message on my board.
I would continually get this A2 debug message and I am not sure what to do to get it to work.
I have updated my BIOS to the latest ones and it is still not working.
Could this be an issue with my PSU? I really hope it's not the MOBO..
My System:
i7 3770k
CoolerMaster 212 Evo
MSI M77 MPower
16GB DDR3 Ram
7870PCS+ Tahiti LE
Corsair HX650 PSU

Quote
I've tested it with one stick and 2 SSDs and it doesn't give me the A2 debug code.
Do you have any different ram to test with?
What ram exactly are you using?
You may perhaps be able to set the ram timings in bios to JEDEC standard 9-9-9-24 1600 perhaps

MSI X99S Gaming 7 and debug code 67

Hi,
I have MSI X99S Gaming 7 motherboard, Crucial 2x8GB 2133 DDR4, MSI GTX970 Gaming 4G, Corsair RM650, i7-5820k setup.
When I am trying to boot the machine it always stops and the debug led shows code 67. I have tried to take everything out, reseated processor and to boot with just the minimum set of components. Result is always the same code 67.
I am running out of ideas. Do you have any hints or should I just return the mobo and processor?
Best Regards,
juha

Quote from: shadow85 on 22-December-14, 19:40:31
So are you going to RMA the board or just use it with 2 sticks? Thats means you are not planning on using it in quad channel, would be a waste.
Anyways if I were you I would definatly RMA it asap. This error 67 problem people are having seems to be widespread. MSI really need to look into this.
As has been said previously, contact MSI. Should they look into it? Yes, but the moderators here are not MSI employees, and while we can bring issues to their attention, we cannot make them look into problems.
So if you have this problem, please contact MSI directly: >>How to contact MSI.<<

MSI MPower B2 debug code

I have boot problem.
New Mpower board with i7-3770K, Crucial Ballistic Tac, 2x8GB, Silent Pro M2 620W.
I have B2 debug code when booting with onbord GPU.
Boot is OK with my old Asus GPU card.

ok if i was you i would take the CPU out of the socket and look at the contact pads for connection marks on them with a magnifier and strong light!
if any pads are missing a contact mark or one has 2 you have a location to look if the pins are bent in that area where it sits.
if all checks out and all seem to have connected to the pads then i would hazard a guess and say that something is seriously wrong with the board!

MSI MPower Debug Codes 4F, 55, 56 [HELP]

So, I just went into the BIOS this morning, just lookin around on settings and disabled a few (Intel VT), and some other stuff that was unneeded.
I booted into Windows, everything was normal, and then as I type my password to the login screen, it just turns off. I was like "hmm okay, maybe shouldn't have turned that off"
I boot my computer again. This time there was no signal on the monitor. I thought that I should open my case to check the debug codes. When I boot my pc it just keeps an ongoing loop of 4F, 55, 56.
I tried switching the BIOS to the 2nd one. The result was worse; it just made a restart loop(the other one doesn't restart, just loop those boot code).
So now Im kinda screwed :/ - Any suggestions?
- Note I also tried to do a CMOS reset on both BIOS

A number of MPower boards. MPower what platform?
Insufficient information.
>> Posting Guide <<
>> Status Codes <<

Debug code 70 , mpower z87

Hi,
yesterday a friend of mine bought the mpower z87 mobo and
everything was fine until today.
The debug leds show the code 70 and the video output doesn't come out.
I'm really desperate and sad for him, I dont know what to do.
The configuration is:
msi mpower z87
i5 4670k
corsair cx750
samsung evo 840
msi gtx 770 lightning

thanks for the reply.. but I knew that the 70 code means Late South Bridge Inizialization
but I didn't know what does it mean .
Anyway we tried with only 1 RAM plugged and the debug code sometimes is A2 (Ide detected) sometimes A0 or A3.
With 2 RAMs the code is 99 (Super IO Inizialization).
We also tried to unplug the video card and the hdd and do the CMOS, with no results .
little update:
the computer now turns on but after 3 mins turns itself off...

Z77 MPOWER - Debug code A2

I've been using this motherboard for a solid month until last Saturday when I shut down my pc and I walk away being done for the day.
To my surprise the motherboard boots itself as I'm walking away and it's refusing to go post bios and keeps giving different error codes depending on what I pull out. Having switched all parts and taken everything out the only debug code that remains is A2.
Specs
Z77 MPOWER
3570 @ stock with h80 cooler
2 x 8 gig ram 1600
2x 7950 @ stock
2 ssd's, 1 hdd and 1 DVD drive.
Corsair ax 750.
What I've done.
Pull out memory cards 1 by 1.
Pull out the Graphic Card, tried different as well.
Pull out all SATA cables and connectors.
Pull out everything hooked to the backplate.
Reset CMOS (Will boot, when prompting to go into bios to change settings it will shut down and go back to A2)
Switch to DUAL BIOS (Will boot, when prompting to go into bios to change settings it will shut down and go back to A2)
I've RMA'd the motherboard but the shop said a pin was bend and refused to fix the motherboard. Having received the motherboard back and inspected the socket I did indeed notice a slightly bend pin.
However this pin is so slightly bend that it's not touching any of the other pins and it took me a "whole" 2 minutes to bend it back in line with the rest. Whatever this was caused by me or them I'm unsure, hell the pin is so slightly bend that I doubt it would interrupt with normal operating procedures.
The motherboard however is still not functioning and stuck on the A2 error code. The CPU debug leds show all lights as a "go"
I wonder if it's even possible for the pin to become damaged while in usage for over a month and cause it to be stuck at A2 debug code? Having looked up the code it seems related to SATA,IDE and the likes which where not plugged in.
I was forced to buy the same motherboard from another store to actually use my pc again, the CPU itself is working fine so it's definitely the motherboard. Love the mobo, just not the store support
Needless to say, having spend 360 (180x2) euro on this board and receiving virtually no support from the shop, I'm not amused.
Any support or advice on this matter would be greatly appreciated.
Many thanks in advance,

Quote from: badboy2k on 08-November-12, 01:50:54
ok have you asked to return the original board to the shop for RMA or a refund?
also did you have MSI live update installed when it all went bad?
I have returned the original board to the shop for RMA. They refused to accept it claiming MSI would not accept the board due to the slightly bend pin.
I did not have MSI live update installed at that time as I reformatted my pc recently so bare essentials were installed. I however do have it installed right now and used it update my new mobo to the latest bios firmware.

PC won't boot. MSI Gaming 7 motherboard had a debug code of 67.

PC won't boot. MSI Gaming 7 motherboard had a **debug code of 67**.
I ran Malwarebytes this morning, it found some stuff, I had it remove them and rebooted. Haven't been able to get my PC to boot since :(
When I begin booting, nothing happens at all on the monitors, the PC itself has power and it looks like it's on but I only get this error code 67 on the motherboard and that's it.
Really don't want to unseat the CPU for any reason to troubleshoot that. CPU is always a pain in the ass for me to remove and place back into a PC. lol.
Specs:
PC:
* Windows 8.1 Pro 64-bit
* Rosewill THOR V2 Case
* EVGA GeForce GTX 970 FTW Edition GPU
* Thermaltake NiC C5 CPU Cooler
* Rosewill SSD/HDD Mountaing Kit with 60mm Fan
* CORSAIR Vengeance 16GB RAM
* CORSAIR HX850i 850W Power Supply
* Intel i7-4790k CPU
* MSI Z97-Gaming 7 Motherboard
* Samsung 840 EVO 120GB SSD
* Western Digital Blue 1TB Drive x 3
Audio:
* Blue Yeti Mic
* Rode PSA1 Mic Boom Arm
* Audio-Technica ATH-M30 Headphones
Networking:
* Cisco Linksys EA4500
* Motorola SURFBoard SB6121
* CAT 6 Ethernet Cables
Peripherals & Misc:
* PS4 Controller
* Razer Naga 2014
* ASUS VS278Q-P 27" 1ms Monitor x 2
* HP 23" S2331 x1
* Logitech C920 Webcam

Quote from: Svet on 04-June-15, 22:06:26
try >>Clear CMOS Guide<< with power cord removed
Tried that, didn't work.
Unseated each RAM stick, didn't work.
Removed the CPU, cleaned off the thermal grease, reseated it, replaced grease and heatsink. Didn't work.
Literally unplugged and replugged everything in one by one and none of it fixed the problem. Still receive error code 67.
Have no damn idea what the heck is going on.

MSI Z87 G45 Gaming Debug codes

Is there a list of the debug codes for MSI LG1150 motherboards anywhere? For some reason the website and the manual dont seem to have them.

the board uses a AMI based BIOS so use this >>AMI Post Codes PDF<< as they are the Checkpoint codes it uses!!!!
the 0x before the code is nothing but the eg: 0xA2 is error code is error code a2/A2 and so on!!!!

MSI x99 Gaming 7 Debug code 04

hi this day my computer dont start only black screen , i see mobo debug code 04
msi x99 gaming 7 service manuel say 04 code = Power on South Bridge Initialization
i use 2. bios swich computer working no problem
now i go RMA?
edit: me try bios clear button nothing always full black screen and debug code 04 , i cant remove bios battery 2 graphic card + water cooling :/

If you familiar with flashing bios, you can try use the second bios to recover the first one.
Manuel has some guide...
BIOS recovery with AFUDOS command
When BIOS updating fails or causes the computer non-bootable, you can recover the
failed BIOS by the steps below.
Preparation:
1. Prepare a bootable USB flash drive.
2. Download the latest BIOS file from the MSI official website at www.msi.com, and
then decompress the file.
3. Copy the AFUDE238.exe and the BIOS file to the bootable USB flash drive
BIOS recovery steps:
1. Power off the computer.
2. Set the Multi-BIOS switch to the functional BIOS ROM.
3. Insert the bootable USB flash drive you have made to the USB port.
4. Boot the computer into the bootable USB flash drive.
5. Set the Multi-BIOS switch to the failed BIOS ROM.
6. Execute the below command to flash the BIOS:
For example: AFUDE238 EXXXXIMS.XXX
7. Restart the computer after the BIOS flashing is complete.
Important
Do not use the Multi-BIOS switch when system is booting up.

MSI x99s Gaming 7 Debug code 79

MSI x99s Gaming 7 Debug code 79
Anyone have any ideas what this is?

79 - CSM initialization
Does it stop at that point or continue booting? If stopping and more assistance is needed add specs following >>Posting Guide<<

Hey i have problem white msi x99s gaming 7 main board led debug cod 04

hey me is Jacob. and i have thes problem White me msi x99s gaming 7 that i get code 04 in the led debug when i power it up and then it whont boot up as normal and it stands on the code 04 in the led debug on the motherboard and it just came Yesterday. and it have been runing for 7 months White no problem and that is that i have the time I have had it in. and when the led debug code 04 in the manual it say power on south bridge initiation. me bios version on me msi x99s gaming 7 is H.90

Board: MSI x99s gaming 7
Bios: Version H.90
VGA: MSI 970GTX gaming 4g, MSI 750TIGTX GAMING 2 GB
PSU: Cooler Master G750M, 750W PSU
Intel Core i7-5820k Intel® Haswell-E 3.3GHz (3.6GHz Turbo Boost) LGA 2011-v3
MEM: Crucial DDR4 16GB 2133MHz Quad-channel KIT
HDD: samsung 840 evo 120gb SSD and Seagate® Desktop SSHD 1TB
COOLER: Intel TS13A Air Cooler
OS: Windows 8.1 64bit Professional
i have tried:
1. Tested power supply with a Thermaltake power supply tester, all voltages are within range, including the CPU power connector, which i did double check to be plugged in.
2. Tried the video card in another PC, working fine, also tried it in each pci express slot (four of them) on the MSI X99S GAMING 7 board.
3. Tried resetting the bios and have also tried booting with just one memory stick in Dimm slot 1
4. Tried powering up the board out of the case with just the power supply, video and memory connected.
and it still get the samme problem as before and still stand on code 04 and still not boot up.

MSI Z77A-G45 Displays debug codes

So I got a new motherboard from MSI, and so far it works great, with one weird thing. Upon booting, it displays 3 "debug" codes as I've read other posts call it. It displays 9C for 1 second, B4 for a whopping 20 seconds, and then A2 for one second. BIOS is updated to latest 2.C.
I wanted to post this because 1) When changing settings or rebooting often, this gets annoying. 2) My SSD boots Windows faster than this.
Any help is appreciated. Thanks.

Thanks! I unplugged one device at a time until it booted (and it passed BIOS withen 3 seconds yay ) It was my Backup-UPS. APC BE550G. It can run fine without being plugged in, but it shuts down my computer and provides statistical data and custom settings when plugged in. Should I contact APC or MSI about this issue?

Msi motherboard 990FXA-GD80 wont work only sending debug code

my motherboard 990FXA-GD80 is not booting to bios ore nothing is coming up to the screen it's only sending debug code:
FF
19
FF
2b
3b
37
36
70
60
72
b2
92
99
52
54
55
56
some times
44
45
46
why are nothing happening and what can it be
i have tried out chaining slots for the memory card and to remove/mount the CPU and still it responds the same
it's a FX-8120 CPU
i have also tried with a
is there someone that knows what can be wrong with the motherboard ples i need some help with this.

FF - means nothing
19 - Pre-memory South Bridge initialization is started
FF - means nothing
2B - Memory initialization. Serial Presence Detect (SPD) data reading
3B - Post-Memory South Bridge initialization is started
37 - Post-Memory North Bridge initialization is started
36 - CPU post-memory initialization. System Management Mode (SMM) initialization
70 - South Bridge DXE initialization is started
60 - DXE Core is started
72 - South Bridge devices initialization
B2 - Legacy Option ROM Initialization <--- possible Graphics Card Problem too
92 - PCI Bus initialization is started
99 - Super IO Initialization
52 - Memory initialization error. Invalid memory size or memory modules do not match
54 - Unspecified memory initialization error
55 - Memory not installed
56 - Invalid CPU type or Speed
the Red area is a very bad set of codes as they are mainly Memory and CPU issues
your some times codes are all DXE IPL is started
ok from that track of codes it looks to me like either a memory problem (MOST LIKELY) or CPU not Supported problem!
ok so Read this>>>> >>Posting Guide<< and give us the parts in your Build and exactly what memory and CPU you have?
also what is the Serial Number of your motherboard (Leave off the last 3 Digits if you do not want to give the full one)? ----- NOTE: its either on the rear of the board or on the UPC label on the Motherboard Box or both!

MSi Military Class II 990FX-GD80 Debug Codes

I am concerned about my motherboard Debug Code LED Display it switches between 43, 44, 45, and 46. Plus the red LED to the right of the display is on a lot. Common sense says this can't be good. I see nothing in the manual about these Debug Codes and would love to know what they mean and, if they are bad, how to fix them. Thanks.

Quote from: xmad on 28-August-12, 00:54:54
First gotta verify thats what it is doing.
If everything is working alright, boot the computer and load control center. See if the numbers match, if they do, i doubt you can turn them off although perhaps a small piece of black elec tape could block it out.
It is telling me the temperature. I have speedfan and it's telling me the Temp of Temp1. Which part that is exactly, idk. But thanks for helping me solve this.

MSI MPOWER b2 or 62 debug code

Similar Messages

Maybe you are looking for