MSI Mpower Max and Team Group LV 2400 Memory (Samsung)

Bios 1.31b is fine, but afterwards seems to have a problem with my memory modules, even at XMP settings they are difficult to boot. I am pretty sure it is related to a single value called tWR. For some reason the tWR value in the later bios are limited to be adjusted between 0 and 16. My modules need it to be 18 to boot at XMP.
I really want those later bioses, because of the faster PWM and the Legacy optimizing for benching. Please tell me where to post these to get my memory modules working.

If you want to report an issue you found contact MSI: >>How to contact MSI.<<
This is a Users-to-Users Forum. MSI creates the beta versions.

Similar Messages

Z87 Mpower max and Command center

Hi guys just got a new mpower max and i have the WiFi and Bluetooth installed on the motherboard,Just wondered why i cant access the wireless server part on command center to use my mobile.
Or will this not work on this motherboard it was one of the reasons i got the board.

Oh well got a answer back from msi not what i wanted to here.lol
Dear sir/madam
Thanks for contacting MSI technical support.
Regarding your concern,the WIFI in motherboard is not suit for mobile control,like Mobile Phone.only the motherboard supports WIFI.
Thanks for your cooperation in advance!
Best Regards,
MSI Technical Support Team
I thought on a overclocking board a feature to remotly monitor temps would be a bonus the feature is available on the msi Z87I a £100 motherboard,Bit gutted this was another feature why i went for this board that and the virtual mvp which is not that good lol wish i went for the asus deluxe:))

[SOLVED] Configuring SPDIF for MSI Mpower MAX

Hi people of the Arch,
I would like to play music over SPDIF, while I get no errors, I also get no sound.
I have read the Wiki here Advanced_Linux_Sound_Architecture
Also, I've been Googling and searching here on the forum, I've followed some steps but none seem to 'sound' right.
What I have not done is creating an asoundrc file with my setup, I believe that I can test if it works first, before I create such a file. Like to hear if this is right.
And I should note that I also use regular stereo out and USB headphones.
Attempt to play wav
@ThijsPC .:19:23:. {thijs}>aplay -D iec958:CARD=PCH,DEV=0 booze.wav
Playing WAVE 'booze.wav' : Unsigned 8 bit, Rate 22050 Hz, Stereo
aplay: set_params:1233: Sample format non available
Available formats:
- S16_LE
- S32_LE
Second attempt with bit-rate and new file
@ThijsPC .:19:35:. {thijs}>aplay -D iec958:CARD=PCH,DEV=0 Yamaha-SY-35-Clarinet-C5.wav -f S16_LE
Playing WAVE 'Yamaha-SY-35-Clarinet-C5.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
No error and no sound..
Third attempt with addressing using hw:0,1 and not the alias
@ThijsPC .:19:41:. {thijs}>aplay -D hw:0,1 Yamaha-SY-35-Clarinet-C5.wav -f S16_LE
Playing WAVE 'Yamaha-SY-35-Clarinet-C5.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
No error and no sound..
My motherboard:
MSI MPower Max
Receiving device:
Marantz NR1403
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, ALC1150 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0
HDA Intel PCH, ALC1150 Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=HDMI,DEV=0
HDA ATI HDMI, HDMI 0
HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
HDA ATI HDMI, HDMI 1
HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
HDA ATI HDMI, HDMI 2
HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
HDA ATI HDMI, HDMI 3
HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
HDA ATI HDMI, HDMI 4
HDMI Audio Output
hdmi:CARD=HDMI,DEV=5
HDA ATI HDMI, HDMI 5
HDMI Audio Output
sysdefault:CARD=P780
Plantronics GameCom 780, USB Audio
Default Audio Device
front:CARD=P780,DEV=0
Plantronics GameCom 780, USB Audio
Front speakers
surround21:CARD=P780,DEV=0
Plantronics GameCom 780, USB Audio
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=P780,DEV=0
Plantronics GameCom 780, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=P780,DEV=0
Plantronics GameCom 780, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=P780,DEV=0
Plantronics GameCom 780, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=P780,DEV=0
Plantronics GameCom 780, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=P780,DEV=0
Plantronics GameCom 780, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC1150 Analog [ALC1150 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC1150 Digital [ALC1150 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: P780 [Plantronics GameCom 780], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
[edit]
Receiver was broken, replaced, config above is good.
Last edited by Thijxx (2014-11-17 07:55:21)

Try this one, v1.2B8;
https://forum-en.msi.com/index.php?topic=169759.msg1240621#msg1240621
Mine originally came with v1.1 and had no problem booting or restarting problem of holding settings above stock/auto/default.
Quote
What happens is that it will make it past the start orbs and I see the mouse with a black background and then it BSODs. The computer restarts again and then boots properly.
Usually an indicator a voltage isn't high enough. OC settings don't sound stable. Might open a thread in the OC and Undervolt forum section for help with that. I've stayed away from the DRAM Training (left it as is) and reached 2800 without any trouble. Not all IMC's are going to handle that speed though from what I've been reading. All my benchmarks so far are showing RAM speed above 1600 adds little performance value.

MSI Mpower Max 4770k Help tweek it

Hi there,
this is my first seriouse MSI board in last 3years and i have encountered few problems with overclock
My Pc Specs are:
Intel 4770k
Corsair H70 with 2xNoctua 14FLX p/p
MSI Mpower Max
Kinston Hyper X DDR3 1600mhz 9-9-9-27 2x4GB
Corsair AX860
Intel SSD 510 250GB
Seagate Barracuda 3TB
Samsung F4 2TB
Corsair 650D
all day passed and i am a bit tired of seeing bios and bsods
i think i got the lazy chip help me understand it better and learn things on the way.
this is most stable i got.
Bios E7815IMS.133
CPU ratio: x44
Ratio: Fixed
Ring: x39
Vcore 1.25v Offset 0.015V
Svid comm. Enabled
from digitall i changed only CPU Vdrop to 100%
Ram set on xmp and manualy entered timings and voltage and speed 1600
With this i pass AIDA 64 stress test for 30min no problem
cinebench pass
when i open Prime95 Blend test 15min pass and bsod..
Temps were 80-85c with room 25c
Everything else in bios is set to default (auto)
Any tips how to tweek it more?
i tried x45 with settings as above i boot into windows pass cinebench but crash on aida64.
i also tryed just x46 with voltage bump up to 1.28v with offset 0.015
I will be deliding as soon as my h220 arrives and CLU.
Also is there some special USB so i can take the screenshots?
i tried all the ports different flashes also formated to FAT32 and NTFS same its saying no usb dongle..
When i put my WD 2TB HDD it recognize it but when i want to save the Screenshot it gives this message
"allocate file system resource fail"
I would post Screanshots but as i mentioned above its annoying problem..
Thanks in advance guys.
Edit:
just to see if i have lazy chip i tryed 1.3v with settings above and x47-48 wont even post.... :(
found flash that is working

ok i tryed this also
Internal VR efficiency management - disabled in screanshots its enabled
with this i am able to make 30mind aida with no crash temps a bit high but can be managed, i boot into windows with this vcore and x45 but unstable during aida 10min bsod
i boosted the voltage to 1.275 with offset 0.015v and got me 20min aida then bsod. any way i can tweek it more?

MSI MPower Max problem

Hello
I recently purchased an Z87 MPower Max and it came present with BIOS v1.1. According to the CPU sheet on the website it wasn't recommended to use that with a 4770K so I flashed 1.0 back on since 1.1 only boots with stock settings. Now I have this annoying problem of getting a BSOD every time I boot the computer for the first time.
What happens is that it will make it past the start orbs and I see the mouse with a black background and then it BSODs. The computer restarts again and then boots properly.
These are my settings:
CPU Ratio Mode - Dynamic
Adjust CPU Ratio - 42
EIST and Turbo boost -enabled
Adjusted Ring ratio - auto (39x)
Adjusted Ring Frequency - 3900Mhz
DRAM Reference Clock - Auto
DRAM Frequency - Auto
XMP - profile 2 (2400Mhz)
DRAM Timing Mode - Auto
Memory Fast boot - auto
VCCIN Voltags - 1.900V
CPU Core Voltage Mode - Adaptive
CPU Core Voltage - 1.165
CPU Core Offset mode is -
CPU Core Voltage Offset - 0.005
Is it something to do with this DRAM training? I was told to disable it but I'm not sure how to. Can someone help me?
I have verified 4.2Ghz stable with 2400Mhz RAM with AIDA64 and Prime95 when using fixed 1.15V and used AIDA64 CPU only for adaptive checking.
I have this RAM: F3-2400C10D-8GTX - its Gskill 2400Mhz DDR3 Trident X ram

Try this one, v1.2B8;
https://forum-en.msi.com/index.php?topic=169759.msg1240621#msg1240621
Mine originally came with v1.1 and had no problem booting or restarting problem of holding settings above stock/auto/default.
Quote
What happens is that it will make it past the start orbs and I see the mouse with a black background and then it BSODs. The computer restarts again and then boots properly.
Usually an indicator a voltage isn't high enough. OC settings don't sound stable. Might open a thread in the OC and Undervolt forum section for help with that. I've stayed away from the DRAM Training (left it as is) and reached 2800 without any trouble. Not all IMC's are going to handle that speed though from what I've been reading. All my benchmarks so far are showing RAM speed above 1600 adds little performance value.

A question about mpower max and psu

hello all,
today i received my mpower max and my corsair 650rm and as i saw the mainboard has 2x8pins eps and my new psu have only one 8pin. i have to connect both 8 pin coneectors in mainboard ?? my new system is
corsair 650RM
mpower max
i5 4670k 3.4
g.skill 1600 2x8gb
gigabyte 760oc 2gb
samsung 120gb ssd
and 1tb wd hdd caviar green

https://forum-en.msi.com/index.php?topic=173050.msg1259428#msg1259428

Mpower max and 3-way crossfire

Hello,i have 3x 290 amd cards but i wonder if my board (mpower max)supports 3 -way crossfire?

Quote from: Sea Dog on 17-April-14, 13:05:24
That information, along with the original question is all available in your manual, MSI Websites, and downloadable pdf manual if one is not available to you.
Slots
- The operating mode will be x16/ x0/ x0, x8/ x8/ x0, or x8/ x4/ x4.
ok thanks and what will be the performance difference between x8x16x8 and x8x4x4

MSI GNB MAX and RICOH R5C476II PCI to Cardbus bridge not working! Help

Why my PCMCIA & CARDBUS Card Reader based on RICOH R5C476II Chipset not
working on MSI GNB MAX BOARD (with newer bios 2.3)???
My Card reader is fine and working properly on many ithers motherboards like: ABIT BD7-II based
on Intel 845E Chipset, or ASUS TUSIM, ASUS TUSL, and ASUS PIIIB-F
Why ??
Please help me.

Yes, sure. I'm trying to use all of five PCI slots, and after slot chnge I,m setting Reset Configuration data in BIOS.
result is the same in all Card positions. Card is detected, but not working corectly.
I'm trying to resolve any hardware conflicts by disabling all od internal mothebrord components like IEE1394 Audio, Serial Ata and others - no cahnges, no solutions ....

MSI 648 Max and ipods? Prob's connecting.

Please can anyone help?
I have a MSI 648 Max board with on-board usb2 and have problems connecting to my 4G 20Gb iPod. I'm pretty sure it’s the USB connection that is the problem. Has anyone else had this? Can anyone suggest anything to help? This is my last port of call before I’ll have to folk out for a Firewire card which I really don’t want to do.
Thanks.

Thanks for replying .
I have used USB for a number of devices (Printed/Mouse/DigiCam) and have never had any noticeable problems. I’ve tried the disconnecting thing and it didn’t seem to have any effect.
I thought it might be something to do with iPod’s not liking on-board USB and decided to post a topic here to see if anyone else has had a similar problem. Doesn’t seem to be much talk of iPod’s though. I wondered if MSI knew of any problems.
I have been around a few iPod forums but not many people seem to be using on-board USB.
Keep the suggestions coming though. Thanks.

MSI MPOWER MAX Z87 - RAID failure after BIOS update (settings reset)

I use the integrated intel RAID controller to create a 2 disk RAID-0 6TB (2x3TB), but everytime I update the BIOS, there is a RAID failure.
It does not matter if I use Live Update or the Update BIOS+ME option of the BIOS menu. All settings are lost, and after the boot the RAID controller is deactivated due to that. I go to BIOS right after the auto-reboot and re-enter my settings (RAID instead of AHCI), but the intel controller only sees 1 disk as a RAID member. Recovery option is not active when I enter the controller options (control+I). I always need to delete and recreate the RAID, which of course loses all data.
Very frustrating!
Am I doing the update wrong? I know I did it once and settings were not reset, my RAID was kept intact, but I believe it was only 1 time of 4 or 5 updates I did to my MPOWER MAX.

Hi, thanks for trying to help!
- I use Windows 8.1.
- My vga does not support UEFI so I use... legacy mode? (I'm not that familiar with BIOS->UEFI yet, sorry.)
- According to Intel RST, the RAID HDDs are on ports 2 and 3.
- This time the update was from 1.80 to 1.90.
1.70 to 1.80 also resulted in the same problem, but I used LiveUpdate.
For previous updates, I don't remember but I sometimes I used LiveUpdate, sometimes the BIOS feature.
I'm pretty sure that only once the RAID was kept intact, and I don't remember the versions or method I used, but I believe I used the BIOS method (don't know if needed BIOS+ME or not), not LiveUpdate.

Z87 mpower max and intel 4770k

hi everyone may i know is it worth to enable the oc geniune for my z87 mpower max motherboard? is there any effects if i enable? (motherboard dies faster or something?)
awaiting for your reply.

Overclocking entails essentially to increase the CPU core clock above those that the manufacturer designed it for.
This process entails increasing nominal values which are in essence controls that are part and parcel of the motherboard. After all the motherboard is designed and built in accordance with the CPU manufacturers control specifications. Oc'ing also entails increasing memory speeds beyond the JEDEC standard. Components of the board also have to apply higher values to support the higher power demands of an overclocked CPU. i.e. the Mosfets amongst others.
The OC Genie is a "one stop" method that does it for you (works most of the time) and it takes due consideration of the max design values. In theory it should not affect the durability of the components. In reality it may. You could compare it to a car's engine. The manufacturer has a red line limitation for the engine RPM. Running at or just below the red line should thus be OK. It will probably last a reasonable time if operated that way, but logic tells me that it probably wont last as long as the sam engine being used within its maximum power and torque curve.
The question is, how long do you want your PC to last? With the ever new technology being released, the general user probably renews his PC every 3 to 5 years. So its a matter of deciding if you are prepared to take the risk and hope it lasts for the envisaged lifespan.

Z87 MPOWER MAX and 1.35V ram

Does anybody know if this board support low Voltage ram like 1.35V ram?
Best regards.

Quote from: RemusM on 20-July-13, 23:23:25
If you want 32GB RAM on Z87 Mpower Max, here is probably the best choice:
http://www.corsair.com/en/vengeance-32gb-quad-channel-ddr3-memory-kit-cmz32gx3m4x1600c10.html
1600MHz, 10-10-10-27 at 1.5V
or
1333MHz, 9-9-9-24 at 1.5V
Tested at 1333MHz (they are very stable).
Depending on your CPU sample, to achieve stability at 1600 you might need to raise some voltages.
Ok i got the whole computer, just need to order ram.I taked some time to realy consider about everything.
My specs now are:
Z87Mpower max
Intel Core i7 4770K (3.50Ghz, 8MB) BOX
[BX80646I74770K]
Gigabyte GeForce GTX 770 4GB WindForce 3X OC
[GV-N770OC-4GD]
Corsair Enthusiast Series Modular TX850M 850W
[CP-9020041-EU]
Noctua nh-d14
U recommended 1600mhz ram kit.What about the same kit only it runs on 1866?
http://www.dinokomp.si/produkt/corsair-vengeance-lp-32gb-1866mhz-cl9-quad-kit-1-50v/
actualy this answer will decide what ram kit should i take
Thanks all for help.

MSI mpower Max z87 problems

I have 2 problems with my MSI board
1) When I Insert my MSI 760gtx card on the 1st SLI slot the computer does not boot to windows and I get a random A? something error A6 A0 depents on what it decides but on the second slot works fine
2) Secondly when I try windows 8 fast boot it says that I have not a windows 8 logo graphic card I have the MSI 760gtx and it supports windows 8 as it says on the box how do I fix that issue ?
thanks for reading

What is the S/N of the 760?
We will need to update the Vbios for GOP support most likely.
The most recent MPOWER bios I just posted here as well. >>BIOSes<<

MSI 845GE MAX and temperature of power spully

Hello !
I have one problem. I have MSI 845 GE MAX mainboard, Creative Geforce Ti 4600 graphic card, 512 DDR 333 memory and power supply from max power 400 W. When I look in Sisoft Sandra 2003 Professional on mainboard information - temperature sensors I see that power/aux temp. is 53-59 celzius. I changed to new power supply and problem isnt gone. What is wrong does enyone now ? Please help me. THANKS ! ! !
Fila

There is no power supply temp sensor installed, the program is just getting random readings from a non used sensor.

MOVED: MSI MPOWER MAX W10 Soundblaster Cinema

This topic has been moved to MSI Intel boards.
https://forum-en.msi.com/index.php?topic=256499.0

Hi
1: >>Posting Guide<<
2: Not many drivers are ready yet for Windows 10 which is not released. Be patient until Windows 10 release (29Th July), and by then most drivers and software should be updated and compatible with Win10.

MSI Mpower Max and Team Group LV 2400 Memory (Samsung)

Similar Messages

Maybe you are looking for