MSI MS 7100 K8N Neo 4 Diamond need bios configuration help very urgent

Hello every body i need very urgent help,
i need help on above mainboard bios conf. i will attach two seperate hdd (120 GB sata II) and i will setup W2003 standart 32bit ed.
if possible i won't use any raid configurations, but i need speed
how should i conf. bios and which controller shouşd i use silicon or nvidia or how and wich has to be used.
corecction about my configuration
Mainboard   MSI MS 7100 K8N Neo 4 Diamond (NF4 SLI,GLAN,SATA)
CPU      AMD Athlon 64 X2 3800+ (2.0GHz,1024K Cache,S939) BOX
Ram      CORSAIR Value Select DDR400 1024MB Kit (2x512MB)
Hdd      SAMSUNG 120GB 7200RPM 8MB SATAII (2x120GB)
Graphic Card SAPPHIRE 256MB ATI Radeon X1600 PRO (PCI-E) AVIVO
Case      ENLIGHT 7247 400W

Hello !!
The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
Good Luck
Greetz MurdoK

Similar Messages

MSI MS 7100 K8N Neo 4 Diamond need bios configuration help

Hello,
i have a MSI MS 7100 K8N Neo 4 Diamond mainboard, Athlon 64 X2 3800+ (2.0GHz,1024K Cache,S939) and 1GB Ram and i would like to install two SATA 2 HDD (160GB) seperatlely one of them i would like to split it into two partitions.
On the first drive without any partition i would like to install OS (W2003 Server 32 Bit edition).
it will be a Domain and file Server for afew users.
i have make an experience but its don't work what i like the transfer rate is to high (10 GB abut 20 Minutes) i think i make some errors on the beginning.
1.) what should i do on bios site and wich controller should i use nvidia or silicon controller?
2.) wich settings are very important
3.) is ther any problem to install W2003 32 bit version ?
it will be glad to get some usefull information.

Hello !!
The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
Good Luck
Greetz MurdoK

MSI K8N Neo Pl. needs BIOS upgrade BAD!

Some bugs i have sinds I use this mobo:
*SB Audigy2 ZS: All installed but no go: xp manager says I need up to date firmware/bios but I used the latest bios (1.10) and drivers.
*Hercules Oc 3D tweaker: install gives continue auto reboot!!!
needs save mode to uninstall.
*PSU has only 2.25V on the 12V line???? alarm on MSI alert4 and MBM5, report on SiSoftware Sandra!!!
In bios itselve the 12V line seems normal (12.21V)
*As for 3D mark? 3DM01 as 3DM03 has less marks (400 points) than my XP2500+ @2.2Gig (XP3200+)!!!
*Sometimes a weard sound coming from mobo, like a car with bad breaks.
And this gets realy annoying!!!
*The onboard sound is just sad, cracking sound of realy bad quality.
Is the K8N NEO now bad?
Well........no, but MSI realy needs a bios update verry BAD!!!!!
Bios used on positive reviews: bios 1.13.
Latest on line bios: bios 1.10.........huhmmmm?
Are there onther people having the same or other problems with this board?
Plz, post them here.

Quote
I realy think about going back to Asus , DFI or Abit.
MSI seems low buget at a high price to me.
Maybe a new bios may help but i don't have a lot of hope in this brand no more.
Max OC i get is 2100MHz, lol OMG.
No use going up with Vcore, its nog go all the way.
This CPU go's @ 2400MHz with no prob on a ASUS K8V Deluxe at stock.
MEM is corsair 1024MB XMS PC3200LL.
Seems there is nothing working on this mobo at all like it has to.
Temps are wrong, OC sucks, not stabel at all, strange sounds coming out of mobo, bad sound from onboad sound, bad support, bad NB cooling, backplate glued on the mobo.......and so on......
I have never had any problems with any MSI boards in the past.. Since I am system builder (maksys.biz) I test tons of motherboards yearly.. I am very happy with MSI's performance compared to other boards (asus, gigabyte, epox, etc). A few times I needed to contact MSI to fix a few RMA problems and they were prompt to get back to me and take care of my problems. I am currently using a MSI K8N Plat board. No problems.. Excellent performance.. I am sorry you feel the way you do about MSI and wish the best for you.

K8N Neo 2 Platinum BIOS resetting itself

Hello
If I switch off the power to the power supply to say move the PC perhaps the BIOS resets to default settings. This is really annoying because it resets the date causing Windows XP to activated again...and again.....and again..... >:(
Any help would be greatly appreciated.
Specs:
K8N Neo 2 Platinum BIOS v. 1.D
AMD FX-55
Corsair TWINX1024-3200C2PT 1GB
BFG 7800GS
WD 250GB SATA HDD
Coolermaster Extreme Power 550W ps
WinXP Pro w/SP2

That fixed it
Thank you Sir, you are a scholar and a gentleman

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! please help

Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! i never backed up on itunes ..please help

No. The contacts are "owned" by the Exchange server.
The Exchange server is owned by the company.
Everything on the Exchange server is owned by the company.
If you quit or were terminated, and your access to the system has been revoked, then there is nothing you and do at this point. Once you deleted the account from your phone, all of the associated data was deleted.
NEVER store personal information on company systems.

MSI MS-7100 K8N Diamond/Platinum SLI & MS-7125 K8N Neo4 Platinum Bios and Tools

http://www.techpowerup.com/articles/other/111
for those without a diamond club membership

Hello !!
The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
Good Luck
Greetz MurdoK

MSI K8N Neo Pl. needs upgrade BAD!

Some bugs i have sinds I use this mobo:
*SB Audigy2: All installed but no go: xp manager says I need up to date firmware/bios but I used the latest bios (1.10) and drivers.
*Hercules Oc 3D tweaker: install gives continue auto reboot!!!
needs save mode to uninstall.
*PSU has only 2.25V on the 12V line???? alarm on MSI alert4 and MBM5, report on SiSoftware Sandra!!!
In bios itselve the 12V line seems normal (12.21V)
*As for 3D mark? 3DM01 as 3DM03 has less marks (400 points) than my XP2500+ @2.2Gig (XP3200+)!!!
*Sometimes a weard sound coming from mobo, like a car with bad breaks.
Is the K8N NEO now bad?
Well........no, but MSI realy needs a bios update verry BAD!!!!!
Bios used on positive reviews: bios 1.13.
Latest on line bios: bios 1.10.........huhmmmm?

Huh, i thought i posted this als the Nvidia section. ??? -)
Plz if some admine can remove this i'l be thankfull.

MSI K8N Neo Platinum 2 Bios Sign On.

So I just upgraded my desktop system to juicy quad core goodness, and was going to put my K8N Neo Platinum 2 into my server box.
When I put it in, and booted it up the fans would turn on, but there was a second where it tried to output to the display and my monitor would turn on. but then it turned off.
So after disecting it again, and plugging only the video card (Geforce 6200 AGP) and the d-bracket in I could see that the lights signaled that it was stuck at the Bios Sign On.
I have a 550W Antec PSU in the box, I'm positive that is plenty, since it was in my old set up and feeding the 6800GT just fine previously.
The only real differences between the set up I had before and what is in it now, is the Adaptec 29160 SCSI card, and I removed the Audigy Platinum and the 6800 GT Agp card that I had in it. I even tried putting that card back in, but no luck there either.
I've tried clearing the CMOS, I've tried even putting it into a new case with different PSU. Still the same, fans start spinning, but no display.
After reading here on some other Bios issues, it says to put in a PCI card (I'll try that Monday, as I took the board into work to try to get it booted there). I also need to test it out with one stick of ram (though I did take out two of them because I had planned on putting the other 2gb in a different PC, leaving 512mb Corsair sticks)
With installing the BIOS from Floppy, will this recover the current problem of not being able to get past the Bios Sign on?
Thanks for any help, it's greatly appreciated.
Slaapliedje

Read >>Posting Guide<<
Try with mainboard out of PC case {
Test the motherboard outside of the case to verify that the motherboard is not shorting to the case and causing a problem
• With only the CPU and heat sink, memory, and video card (or onboard video) connected to the motherboard, place the motherboard on a non-conductive surface and retest the motherboard
• Check the case mounting standoffs to verify that they are lining up correctly with the mounting holes on the motherboard.
}

MSI K8N Neo V2.0 Bios update crashed

Hi there,
I just thought it would be an good idea to update the bios pf my MSI K8N Neo V2.0 retail mainboard via Live Updater 3. But near the end WinFlash told me there was an error and form then on I get a checksum error while booting. I cant find any bios data on the website.
Is there anything I can do to fix that? How can I create a floppy without Live Updater?
Hope you can help me.
Dennis

Quote from: vI3Tz on 10-February-09, 17:09:09
My mainboard is this one http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&prod_no=217
Its an Award BIOS. Which version I cant tell you but I did not update it before.
That's V2, not V2.0 ==> http://global.msi.com.tw/index.php?func=prodcpusupport&maincat_no=1&cat2_no=&cat3_no=&prod_no=210#menu
Paste full details about the mainboard, look here how to ID ==> https://forum-en.msi.com/index.php?topic=113146.0
Or paste mainboard SN.

K8N Neo 2 Hidden Bios Options!!!

Hi,
Has anyone tried those new options and can tell me what they do exactly??
To enable them you must press Shift+F2 and Alt+F3 rapidly in the bios.
Then go in the cell menu and you will find new options:
NV/ATI Speedup
Dram drive strenght
PCI clock auto detect
I am wondering why has MSI been hidding this from the users and if there are other combinations for other hidden options.
Fell free to comment
Mcklain

Hi Micklain.
We seem to have very similar set ups.
COOLERMASTER ATC / ENERMAX 450
K8N NEO 2 PLAT' WI FI
FX53 ZALMAN 7000CU COOLING
OCZ DUAL CHANNEL 1GB PC3200 PLATINUM REV 2
X800XT PE
I have recently put the system together but have suspicions about settings in the bios.
could you tell me what your settings are FSB, Multipliers, Voltages, etc etc.
Sisoft Sandra tells me that my CPU Voltage is set to low but I never touched this setting, alla bit confusing for a noob at this, I was just relieved that it hung together and it works but not sure where to start, I intend on some mild forrays into Over Clocking but nothing nuts..
I have my Ram set up for 1T and tight timings 2-2-2-5 but I know it has got loads of headroom but not sure where to start.
I ran a 2001 default benchmark and got 29250 so it can't be far off in the settings. I just seek re assurance I guess and sorry if I have hi jacked the thread a bit, just realised.
Thanx.
Gez......
Great scores by the way.

K8N Neo Series - update bios 1.4 to 2.1 - SATA problem

- i have K8N Neo-FSR (7030) with two SATA ports.
- i update bios from ver 1.4 to 2.1
- after restart, my bios show FOUR SATA ports, and on welcome screen is write "K8N Neo Platinum"
- difrent betwen K8N Neo-FSR and K8N Neo Platinum is in additive two SATA Ports
- is this NORMAL???
- how i can fix it?
Thanks for solution

Quote from: syar2003 on 29-April-06, 18:53:20
BE careful in your statement Stick .
Quite a few with K8N Neo Platinum (MS-7030) has gotten their board ruined (no-post) over the last weeks
cause by LiveUpdate giving out a wrong MS-7030 bios .
There is three 7030 which use different bioses and is identified on the bios extension name .
MS-7030 versions 1.0 to 2.22 is for the 1'st generation (Neo Platinum and FSR)
The other two have extension 7030.5xx and 7030.7xx and is for Neo-V and Neo V 2.0 .
Think it's a really bad call from MSI to use the same MS number for seperate boards that completely
rely on "their own" bios ,and at the same time autoprovide their bios files through the liveupdate server .
do all of those BIOSes have the same BIOS string ID?

K8N Neo FSR, possible BIOS bug: setting Vcore with Cool'n Quiet enabled broken?

Athlon 64 3400+, socket 754
K8N Neo FSR, Pheonix-Award BIOS V1,5
WinXP SP2
Having Cool'n Quiet disabled in BIOS setup, CPU core voltage adjustment
using 'Adjust CPU VID' below the Athlon 64 default 1,5V core voltage
works like a charm. Fine!
But with Cool'n Quiet enabled in BIOS setup (and WinXP), under load the
CPU core voltage raises to 1,5V in any case, independently of what I did
define in BIOS setup with 'Adjust CPU VID' (e.g. 1,4V). Software tools setting
Vcore like Core Center are not running.
So I can choose to either run a silent system in idle mode with Cool'n Quiet
enabled or under heavy CPU load with Cool'n Quiet disabled but Vcore
reduced :-( Am I missing something or does it rather look like a BIOS
bug?
Greetings, Falo

Quote from: Tiresmoke on 21-March-05, 00:19:19
As undervolting is not considured standard operating proceedures then how can it be considured a bug.
nor is overclocking but MSI mobo manual reads 'This motherboard is designed to support overclocking.'
So this mobo is designed for supporting at least one non standard operating procedure
Seriously, if BIOS offers a feature I suppose it to work as expected.
regards, Falo

MSI K8N NEO Platinum Edition Memory plz help!

Hi
http://www.datorbutiken.com/se/defa...2X512DDRCA400PR
Is this memory ok with MSI K8N NEO Platinum Edition ?
If it is, do you know how well its oc:s?

He would be talking about this:
http://www.newegg.com/app/viewProductDesc.asp?description=20-145-466&depa=0
But I wouldn't reccomend that memory mainly because I have heard mixed reviews about it. You can get the same (if not better) memory at either of these links, the only difference between the two links is the color of the heatspreader (as far as i can tell). This is the memory I have and it works very well, plus its much cheaper:
http://www.newegg.com/app/ViewProductDesc.asp?description=20-145-449&depa=0
http://www.newegg.com/app/ViewProductDesc.asp?description=20-145-450&depa=0

MSI K8N NEO PLATINUM BlueScreen Issue! Help!

I'm having an issue with my MSI K8N NEO i get the blue screens occasionally.. A friend of mine says its a IDE driver issue.. LMK Here are the system specifications.
MSI K8N NEO PLATINUM
ATHLON64 3000+ @2.01 (stock)
SAMSUNG 512MB PC3200 CAS 2.5
PNY MX440 64MB DDR AGP8X
MAXTOR DIAMONDPLUS MAX 8 40GB, 7200RPM SLIM
300W GENERIC PS
LMK whats wrong if you have ideas, i dont know if you have sufficient information to come up with a conclusion.. im not too sure whats going on either.. But A friend of mine is getting exact same issues he says its IDE conflicts.. now when the Blue screen comes up it doesnt stay long enough to give a moment to read it.. lmk if you have ideas thx..

which drivers are you using?
Right click MY computer -> properties -> Advance -> start up and recovery -> system failure -> uncheck "automatically restart"
this way it will stop at the blue screen and get an stop error number
Or view the error log
Help and support -> Pick a Task ->Use Tools to view your computer information and diagnose problems ->under Tools -> my computer Information-> View Advanced System Information -> View error log
it shows all errors by date migh provide you error numbers ie. 0x000008e

MSI MS 7100 K8N Neo 4 Diamond need bios configuration help very urgent

Similar Messages

Maybe you are looking for